Need help re: No SIM message in Cellular Data

I have had my iPad for about 8 months now, and originally set up my acct with AT&T on an as-needed basis. I havent used my iPad for about 3 months now due to personal reasons keeping me busy otherwise, and am now getting a message of NO SIM under my Cellular Data category on Settings.
Any help anyone can offer in how I can resolve this issue would be greatly appreciated. Thanks.

So you will need to turn the att account back on beforemyou can use the 3 g, but beforemyou can do that, youmneed to get by the sim issue. First, pop it out and re insert it.
Then go to settings, general, and look at the cell settings, and also look in reset and see ifnthere is a reset cell settings.
Reboot the pad. Push and hold the home and sleep buttons until the apple logo appears. Ignore the red slider. Mthen see if you still get the error. You may need to stop by an att store to get this sorted out if it does not come back by itself.

Similar Messages

No SIM message and Cellular Data grayed and unresponsive, what is going on? My cellular data quit working as I sat on the Mexican border. Took to ATT store and they said this is common problem near the border. They fixed, but it failed in Mexico.

I purchased a domestic and international cellular package from ATT. Domestic worked for two days as I drove toward Mexico. As I sat two miles from border I tried to us cellular data again, but got No SIM message and cellular data switch greyed,. I called ATT and they told me to move away from border and try again. Didn't work. Called ATT back and they said go to ATT store in Sierra Vista, AZ. Lady there fixed and told me, "You are good to go." But she cautioned not to use until well into Mexico as sometimes domestic and international packages get confused near the border. I waited until I was about a hundred miles below the border and tried. Same message and same greying of cellular. Took to ATT when I returned. They changed SIM card and said problem is with Apple. Took to Apple and they say problem is with ATT. The fact that the ATT rep in Sierra Vista fixed makes me think it is software. I see that similar problems are common but solutions are vague and varied. Help please.

Has any had you try a reset yet? Sometimes the WiFi & Cellular anntennas get wacky.
Hold Sleep/Wak & Home buttons until the screen goes dark and you see the Apple logo

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
Go to Settings>Safari>Clear History and Website Data
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

Need help about the SHA Message Digest ? & what is use of Message Diagest ?

need help about the SHA Message Digest ? & what is use of Message Diagest ?
1>i have one program of making message digest
2>which requires two files name
3>one for input like txt
4> second is out put file of message digest
can any one tell what is the use of second generated file .

MessageDigest md = MessageDigest.getInstance("SHA");
FileInputStream fis = new FileInputStream(args[0]);
byte[] b = new byte[1024];
int readed = -1;
while((readed = fis.read(b)) > 0)
     md.update(b, 0, readed);
fis.close();
FileOutputStream fos = new FileOutputStream(args[1]);
byte[] d = md.digest();
StringBuffer sb = new StringBuffer();
for(int i = 0; i < d.length; i++) {
     String str = Integer.toHexString(d[i] & 0xff);
     sb.append(str.length() < 2 ? "0" + str : str);
fos.write(sb.toString().getBytes());
fos.close();

I need help exporting Apple Mail messages to Outlook for MAC 2011

Good morning,
I need help exporting Apple Mail messages to Outlook for MAC 2011. Please....

It is possible to do this without external tools, but it is a tremendous faff. See
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/import-ema il-from-mail-to-outlook-2011/5e858173-e1f4-4adc-99d7-253cc467169d?page=2 for details.
The easiest way, however, is to use Mail Exporter Pro https://itunes.apple.com/us/app/mail-exporter-pro/id675131616?mt=12 which will convert the email for you from one format to the other, and comes with an excellent manual.
A third possibility is to connect Apple Mail to an email account via IMAP (this doesn’t have to be your usual account, you can just create a Gmail account for the purpose) . Copy all the messages into it and they will be uploaded. Then connect Outlook 2011 to the same account, via IMAP again, and let the messages download, then copy them to wherever you want to keep them and disconnect from that account. This is slow but preserves the attributes of your email (e.g. read/unead) better than any other method.

I need help installing Acrobat Reader - messaged failed to connect to a DDE Server. Can't access documents

I need help installing Acrobat Reader - messaged failed to connect to a DDE Server. Can't access documents

Please see if "acrobat failed to connect to dde server" when openning Adobe Acrobat XI PRo helps.

I need help activating new sim card

i need help activating my sim card

You don't activate the sim card - put the sim card in the phone and then turn the phone on and activate the phone.
What exactly do you need help with because it does not get any easier than that.

My ipod touch is in DFU mode 5g I need help, do not want to lose my data, please help in Spanish

I need help, do not want to lose my data, PLEASE HELP IN SPANISH

Una vez que el dispositivo está pidiendo ser restaurado con iTunes ... ya es demasiado tarde para salvar nada ... y usted debe continuar con la recuperación de ...
Vea aquí> http://support.apple.com/kb/HT1808
Es posible que tenga que probar más de una vez ... Asegúrese de seguir todos los pasos ...
Tómese su tiempo ... Preste especial atención a los pasos 3 y 4.
Para minimizar la pérdida ...
Después de haber recuperado su dispositivo ...
Re-sincronizar su contenido o restauración de la última copia de seguridad ...
Restaurar desde copia de seguridad> http://support.apple.com/kb/ht1766
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
To minimise loss...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

HT3529 I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off? I can usually send the message, but often do not receive messages until I either have wifi or turn cellular on.

I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off and without wifi? I can send the message but often do not receive messages from others, iPhone or other, until I turn on cellular or wifi.

Depends on the type of Message.
SMS messages will send and receive with data off. and while you can guarantee you send using SMS you cannot guarantee that whoever replies to you does also. They may be replying thorugh iMessage if they are using iPhones.
However Android should be sending through SMS.
You can turn off iMessage if you want to, though people with limtied SMS text messaging in their plans may not appreciate it, and stop messaging you.

TS3694 I need help to fix error message -69

I am having problem with syncing my ipod classic (160gb). I have this error message -69, that I need help with. I have already restored my ipod, but cannot add my anything (audiobooks-my music) to my ipod.

see if you have any friend have a Mac computer, do a restore there before syncing with your PC

HT4859 I need help restore my old messages and pictures to my phone. I did a restore from my computer and my boyfriends stuff downloaded on my phone. How do I get my stuff back?

I need help restoring all of my pictures and infor to my phone. My ex boyfriend info started downloading on my phone and earsed all of my info

Mission accomplished. While waiting for your reply,. I found an article that mentioned a copy/paste of the following code from the old pref.js to the new pref.js:
user_pref("ldap_2.servers.OutlookExpressAddressBoo.position", 0);
user_pref("ldap_2.servers.OutlookExpressAddressBoo_1.description", "Outlook Express Address Book");
user_pref("ldap_2.servers.OutlookExpressAddressBoo_1.dirType", 2);
user_pref("ldap_2.servers.OutlookExpressAddressBoo_1.filename", "impab-1.mab");
user_pref("ldap_2.servers.OutlookExpressAddressBoo_2.description", "Outlook Express Address Book");
user_pref("ldap_2.servers.OutlookExpressAddressBoo_2.dirType", 2);
user_pref("ldap_2.servers.OutlookExpressAddressBoo_2.filename", "impab.mab");
That identified the impab.mab file, and now all my contacts are showing.
Here is a link to the article: http://nctritech.com/thunderbird_contact_groups.php
Case closed. Thanks everyone for all your help.
Ted

HT204023 What is 'sim pin' under Cellular data on my iPad mini? How do I use that and change cards from one country to another?

I have a new ipad mini with retina display, and cellular capability.
I've learned how to set up an account and use it in the US. I'm now traveling internationally and need to learn about changing the sim card.
My first question is about the notation under 'settings', Cellular Data, SIM PIN. Under SIM PIN, there is an option of turning on 'sim pin' and then entering a PIN to lock the SIM.
What does SIM PIN mean in the first place?
Where does the PIN number come from?
Thankx.
SusanFrances

A SIM PIN, also referred to sometimes as a PUK Code is like a PIN number for your SIM card (just like your ATM Card). Since your SIM card has your cellular account on it and can be typically removed from one device and put into another, you can lock the SIM Card with a SIM PIN if you choose. If you activate the SIM PIN feature and forget your SIM PIN when you try to re-activate your device or a new device in the future using the same SIM Card, you may have to contact you carrier to get a new SIM Card. http://support.apple.com/kb/ht1316
As far as changing the SIM Cards out because you want to use a new carrier, you can remove the SIM card fomr the old carrier and put in the SIM card form the new carrier. http://support.apple.com/kb/ht5163
I hope this helps clear things up.

Is there a way to turn off the message alert "Cellular data is turned off for _____"?

I turned off cellular data for about half of my apps so I don't go over my data limit (Thanks AT&T). Now every time I open these apps a message alert pops up saying "Cellular Data is Turned Off for _____. You can turn on cellular data for this app in Settings" And it gives two buttons, "Settings" and "Ok".
If it were only a few times, I wouldn't care about closing this message. But now that I have to do it like 20-30 times a day, it has become SUPER ANNOYING. Seriously Apple, how do I turn your stupid message off??? I TURNED OFF MY CELLULAR DATA FOR A REASON, please stop reminding me of what I already know.
AND the worst part is, when that message pops up it locks the phone so the home button doesn't work. Pretty lame software feature in my opinion.

There is a fix for this! I was about to jailbreak my phone to cure this issue, but found the answer on another thread.
Go to settings/notification center. Select the app in question and turn the slider for "allow notifications" to ON. Turn off the sliders below for sounds, etc. Now it shows up in the notification center separately (or seemingly not at all) and not on your screen when you switch to the app. Good luck!

Need help with Importing These Kinds of Excel Data Sheets

hy there, Can someone Assist me with this.
I got a package in SSIS. where I need to import Excel data sheets.
Those sheets are coming from Cube.
And So their format is bit different
Kindly help me how to import those With DATA FLOW TASK.
And ,
As you can see Excel sheets got Filter on their Columns.
So I am Getting much often Errors in importing those sheets Via DATA FLOW TASK.
Thanks In Advance.
# Note.
I can not Edit each Excel File Before running packages.
Packages are automated.
And also the sheets are automated, they get store in the FTP on a cyclic job.
So Have to Do it on PAckage level

You cannot hit a moving target, your data quality is at risk, too. Even if a package succeeded there is still a degree of suspect whether the data ended in the right place.
You can create a helper program that checks for data integrity, e.g. a series of SQL queries can be executed against the source to pinpoint what metadata shape the Excel arrived in. Then branch the package flow based on one or the other variant (there will
be only a handful). The branching can be done by using Precedence Constraints. Hey, but see what I say about above.
Arthur My Blog
Okay than I must do it differently. OR get the source in a better and secured manner.

Need help in displaying error message on the same screen

Hi Experts,
I have written a report which gets called from IW52 by clicking one of the action items. Now in my report when I am trying display an error message it is getting displayed at the bottom of a blank screen. My requirement is to display it at the bottom of the IW52 screen, so that user can rectify the error.
Please help.
Regards,
Sambaran Ray.

Hi,
Probably you need to find a way to enhance the standard code.
But make one thing sure that the code (included bu you) gets fired only when that specific report is being executed. Else it may harm the standard functionality.
Hope this helps you.
Regards,
Tarun

Need help re: No SIM message in Cellular Data

Similar Messages

Maybe you are looking for