Need Help reactivating cisco valet plus after 2 yrs

I had previously installed the cisco wireless at my old apartment. I've moved since and now I'm having difficulty setting it up at my new place. The old network I created pops up but seems locked. But when I click connect using the easy set up I keep getting an error message saying that there is no internet connection. I refuse to pay to $39.99 for troublshooting support after already spending so much on the device. I tried to reset it to the factory setting but that didn't seem to work.
If anyone can help me I'd really appreciate it.
Thanks!

To set up a Linksys router, you need to perform four (4) steps using the computer that is registered with the ISP:
i. Verifying Internet connection
ii. Connecting devices together
iii. Checking the router’s LEDs
iv. Configuring a Linksys router for DSL Internet connection
QUICK TIPS:
The router’s power adapter needs to be plugged to your router and into an available power outlet.
If using a wired connection, the first Ethernet cable needs to be plugged to the computer’s LAN port into any of the router’s blue numbered Ethernet ports.
The second Ethernet cable should be plugged to the modem’s Internet port and the other end into the router’s yellow Internet port.
Ensure that you have no firewall enabled that may prevent the router from being detected.
Here is the link for setting up your Linksys Wireless Valet router for the first time using Cisco Connect: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=e30f926604334d538668529cb50ad174_21463.xml&pid=80&...
If you still encounter problems installing the router using the Cisco Connect program, you may configure the router manually according to the type of Internet service you have. Follow the instructions below for your specific Internet service type:
To learn how to set up your router with Cable Internet service, here is the link: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r....
To learn how to set up your router with DSL Internet service, here is the link: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r... .

Similar Messages

About to Replace Linksys WRT54Gs with new Cisco Valet Plus

Probably sounds like a dumb question, but I am ready to istall a new Cisco Valet plus router to replace my old Linksys WRT54GRS. Do I need to record all of the old info such as SSID, Channel, Encryption, passphrase, and key code or will the "automatic" Cisco install system do this on it's own? Just want to make sure I have everything I need done before I start installation on the router, base computer, and my remote access laptops.

Just follow the instructions on the manual. If there's a need to change or retain your previous settings, key it in while doing the configuration.

Need Help, i have an Ipad2 after 6.3.1 update, i have no cameras, or e-mail, I already reset, multiple times, but no improvment, can anyone help?

Need Help, i have an Ipad2 after 6.3.1 update, i have no cameras, or e-mail, I already reset, multiple times, but no improvment, can anyone help?

When you say reset, do you mean a reboot by holding both the power and home buttons until the apple logo appears, ignoring the red slider if it appears?

Hi All, Need help my iphone 4 lock after upgrape ios7.1 (no service). i buy a secondhand phone not know first apple id. please advise how to normalize

Hi All, Need help my iphone 4 lock after upgrape ios7.1 (no service). i buy a secondhand phone not know first apple id. please advise how to normalize

You will need the original owner of the iPhone to unlock it for you, or the iPhone will remain useless. It has been Activation Locked, which is described here:
http://support.apple.com/kb/HT5818

Need Help: MSI GT780R Black Screen After BIOS UPDATE,

Hi,
I descided to update my bios since it wasnet updated,
and i found the BIOS and chooced the NON raid One. Downloaded made a Bootable USB Drive.
and Typed, Afudos.exe And E1761IMS.10H. and it started Updating and in the end it sayd updated.
i Restarted PC was working then next restart It was Blackscreen, i have since 3 days now reading forums how to fix but theirs not much.
i have tried removing the Red and Black Cable, that Reset CMOS Settings. it did work, but after Shutdown same blackscreen. tried this option again didn't work anymore.
i have also tried Updating Bios Blind but doesn't work either im pressing keys wrong. or im not getting into the USB Drive.
I really need help by someone who has had this issue themselves or handy with computer please i need help
Thank You!

RX-8 Thanks for the reply,
No, i did not use flash.bat when i got to the point to write i wrote. Afudos.exe and E1761IMS.10H i watched a dude
when he made it on Youtube that's why i didn't include flash.bat.
whats the right BIOS Update for a GT780R MSI Laptop ?
is it the NON Raid System
or the Raid System one.
i got SSD 128GB Harddrive + 750GB Harddrives.
Any other ideas how i could fix my issue with blackscreen would be appreciated
thank you.

Need help redownloading Acrobat X Pro after computer crash

My computer recently crashed and I need help redownloading Acrobat X Pro. Tried "Download" under My Orders to no avail. Suggestion?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
Acrobat X Pro, Reader, and Suite:
http://prodesigntools.com/adobe-acrobat-x-10-pro-reader-suite-direct-download-links-ddl.ht ml

I need help with Cisco IFS

All,
Background Information:
I am a network engineer and I manage a small business network. The network consists of a couple of 3750G access switches and 2 6503-E switches (one of these also serves as an access layer switch). I am looking to upgrade my IOS on my external facing switch so that I can use a 16 port 10Gbe ethernet module. In this switch, I have a SUP-720 3B in slot 1, a 16 fiber port 10Gbe ethernet moduld in slot 2 (not online yet), and a 48 copper port 1Gbe ethernet module. In the SUP-720, I have one CompactFlash card in disk0.
This is where I need help:
Like I said, I'm trying to upgrade my IOS software in order to support my new ethernet line card. I know that the images are stored in flash memory. However the IFS on my switch seems to be confusing. He is a print out of the cd ? command:
bootflash:
cns:
const_nvram:
dfc#3-bootflash:
disk0:
disk1:
flexwan-fpd:
null:
nvram:
sup-bootdisk:
sup-bootflash:
sup-image:
sup-microcode:
syslog:
system:
tar:
tmpsys:
<cr>
Can someone please tell me what all of these directories are used for???? I'm not sure where to store the IOS image. When I change directories to sup-bootflash: it looks like it has the same contents as sup-bootdisk. Also, when I list the contents in disk0:, sup-bootflash shows up in there. Is this just a soft link to that directory? I'm really confused and would like to know what all of these directories are used for. Does anyone know of a good white paper that explains the function of these directories?
Thanks,
Manny

Manny
I am not prepared to try to explain all the directories, which is a pretty good question. But I can answer the most important of your questions. Put the new image into sup-bootflash.
HTH
Rick

Need help configuring Cisco/Linksys wireless router to extend wi-fi signal to living room

My U-verse wireless gateway is in the back of our house. We live in an old 1920's home with solid wood walls. For our macbooks, we get a pretty decent signal, but my wife's iPad 2 get's poor wi-fi speeds. I bought a Cisco/Linksys WRT160N wireless N broadband router. I have a wired connection in my living room (going to a 4 port switch) then connected to my DVR. I tried hooking up the new router but ended up getting no signal on the iPad. In fact, it caused other issues. I ended up disconnecting it and re-booting my gateway. All came back fine. This wireless router replaces a similar unit that went out in after a power failure, so I know this can be done, but I forget exactly how I confiured the old one. I would like it to "extend" my signal to the living room, but I am also willing to create a new network (different SSID). Do I need to turn of DHCP? Are there any web sites that can assist me in configuring the router? I wish I didn't have to deal with this. The signal from the RG is great when you are in the back room (20+ down). But my wife gets about 3 down on her iPad in the living room. Thanks in advance.

Hi ,
I was doing some research on how this can be done. It does not appear there is an option in the Cisco router to set it up as an access point, but there are several options you can do to extend your network.
The first thing you can do is just set it up as a router behind router setup, and you will just have two separate networks. Make sure the DHCP pool does not conflict with the U-verse's gateway of 192.168.1.x.
The second thing you can do is connect the Ethernet cable to one of the LAN ports on your Cisco router instead of using the internet port. This should make it work like a smart switch.
With both setups, you want to probably change the SSID, network key, and wireless security settings to the same thing for wireless roaming abilities. That way, anyone that configures their wireless connection will be connected to both networks. Just make sure the wireless channels are not the same, and I would suggest having them at least 5 apart.
Hope this helps.
-ATTU-verseCare

Need Help on Cisco Wireless Solution!

Hello Netpros!
I have some issues that probably most of wireless implementers faced after implementing a wireless solution. This is an actual feedback from the customer and These issues can be broken down to the following:
1. The wireless Network is slow! (wireless performance)
The customer has Airtight in placed and airtight reports that users are mostly connected to the wireless network on 2 mbps speed. Users also says that their network experience using wireless are slow compared to wired network.
My question is what reports or guides that cisco wireless cotroller system or WLC can shows that proves the network is working as it is intended. Any guides on how to improve the user experience? Any guide from Cisco IT?
During these slowness, what reports from WCS or WLC that can best shows the problems and helps us implementers to mitigate the problem?
2. Baseline Wireless Performance.
When asked about a baseline performance of wireless network, what reports from the WCS or WLC that can show this and what is the acceptable or baseline values?
3. Is there a general guideline on how to use WCS or WLC reporting tools to troubleshoot a wireless performance issue? What reports to see? and how to translate that to say to the customer that the wireless network is under performing?
The main reasons i am asking these questions is because i cannot find any useful documents in cisco that guides the wireless implementers on how to use the reports generated by WCS or WLC when it concerns the performance of the wireless.
Most of the reports WCS generate that relates to the performance normally rounds up the AP performance, channel, noise, but how to translate that to user concerns is another matter.
Perhaps these issues are partly due to user expectations or maybe the wireless setup need to be tweaked or even might requires a spectrum analyzer to pinpoint interferences.
In either cases, I hope netpros can help direct me to good documentation albeit from cisco or other sources that can best outline wireless performance reporting using cisco wcs and wlc.
Background information:
The wireless network setup has one WCS, one location appliance, 4 WLCs and around 150 to 200 APs, most running Local and some running HREAP. Most of the issues concerns the local type APs.
Thanking all in advance!
maldin

Yup,
thats what we told the customer and even showed them the wlc/wcs reports.
Unfortunately, these customers are lacking in wireless knowledge and they want a streamlined, documented steps to generate the reports and also to help them understand in laymen terms.
At the moment we are formulating a holistic approach to the customer to get them understand wireless first, get them to have a policy and enforce and then drill down to management, reporting and troubleshooting.
The thing is, the wireless is always working fine, but sometimes so it happens some bigshots unable to connect to the wireless network in meeting rooms or somewhere and the become jumpy and pointing fingers.
So the IT manager wants to reduces the finger pointing by having the WLC/WCS to produce reports to them.

Need Help Setup Cisco RV042 vpn

good day everyone, a month ago my boss purchase 4 pcs cisco rv042 vpn to be used in our small office and to our satelite office, with expectations of simple file sharing and remote troubleshooting and for better and safe data transfer. since the task is given to me as an IT staff it is difficult to me to setup this vpn router since i have a little idea and many question are on my mind that need to be answered, i read the manual test the vpn router but still no good answered found. i know it is dufficult but with proper guide and step by step on how to use this one i can make it work. please anyone help me i need answers to this questions.
i am using windows 7 pro sp1 64bit for my test unit, how can i make a vpn server? a client?
in the past i connect the internet connection in the internet connection port in the back of the router, then another cable from vpn port 1-4 i select #4 port to connect to my pc, since the vpn give the ip on my pc i can easily connect to the firmware of the vpn using the deafault username and password. when i go to the firmware i dont know where to start, and i dont even have the internet connection for my pc.
i feel sorry for myself beacuse i have no idea in this kind of thing, CISCO people and others out there i am calling for your help.
thank you in advance
mel

Dear Emilio,
Thank you for reaching Cisco Small Business Support Community.
If you’d like to setup a Site to Site VPN on your RV042 here is a good step by step guide;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=304
If you are looking into a remote access VPN, QuickVPN, here is the step by step procedure;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=452
Just in case here is also a document with Windows operating systems tips;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=2922
Finally here is a link with the Admin Guide where starting on page 122 you can find everything related to VPN setup on this particular device model, beside info in how to setup your internal network (I suggest you to go through this admin guide so you know everything about the router);
http://www.cisco.com/en/US/docs/routers/csbr/rv0xx/administration/guide/rv0xx_AG_78-19576.pdf
Please let me know if there is any further assistance we may assist you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Need help on cisco CUCM license issue

Hi Team,
I am using 9.0 version CUCM . This machine i have cloned from some other CUCM .So after logging into to CUCM web admin i am getting an error like The system is operating with an insufficient number of licenses. Configure additional licenses in your Enterprise License Manager in order to restore the ability to provision users and devices. So i tried to login to ELM Manager for applying license .But ELM is giving an error like invalid username and password. I am using the same username and password which i used to login into cucm web admin .
So can some one please help on this issue.
Thanks,
Sasikumar.

Try this,
Unknown username and password for Enterprise License Manager login
Description
I do not know the username and password of the system when it was originally installed, so I cannot log into Enterprise License Manager.
Resolution
Log into the platform CLI with the OS administration credentials and use the license management list users command to view the username to use for signing into the Enterprise License Manager application. If you are not sure what the password is for this username, you can use the license management change user password command to change this password.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/elmuserguide/9_0_1/CUCM_BK_E596FD72_00_enterprise-license-manager-user-90_chapter_0101.html#CUCM_RF_I970430F_00
HTH
Manish

NEED HELP!! LOGIC CRASHES AFTER splash screen plss hel

hey i recently updated to osx 10.6.6 and since then my logic pro has been acting up. But it has come to the point to where now it doesnt even open it crashes right after checking midi drivers. here is the report if anyone can pleasee helpp
Process: Logic Pro [483]
Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Identifier: com.apple.logic.pro
Version: 8.0.2 (1502.22)
Build Info: Logic-15022200~9
Code Type: X86 (Native)
Parent Process: launchd [410]
Date/Time: 2011-01-23 18:53:35.804 -0500
OS Version: Mac OS X 10.6.6 (10J567)
Report Version: 6
Interval Since Last Report: 406669 sec
Crashes Since Last Report: 78
Per-App Interval Since Last Report: 367569 sec
Per-App Crashes Since Last Report: 59
Anonymous UUID: A3586FC6-6081-439D-A15C-C8042C0882EB
Exception Type: EXCBADACCESS (SIGABRT)
Exception Codes: KERNINVALIDADDRESS at 0x0000000049b45b69
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Application Specific Information:
abort() called
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x9128a176 __kill + 10
1 libSystem.B.dylib 0x9128a168 kill$UNIX2003 + 32
2 libSystem.B.dylib 0x9131c89d raise + 26
3 libSystem.B.dylib 0x91332951 __abort + 124
4 libSystem.B.dylib 0x913329cd abortreportnp + 0
5 com.apple.logic.pro 0x002b37ff 0x1000 + 2828287
6 libSystem.B.dylib 0x9128f46b _sigtramp + 43
7 ??? 0x0000000b 0 + 11
8 com.apple.logic.pro 0x00020cff 0x1000 + 130303
9 com.apple.logic.pro 0x00021f94 0x1000 + 135060
10 com.apple.logic.pro 0x00032e0b 0x1000 + 204299
11 com.apple.logic.pro 0x002b741e 0x1000 + 2843678
12 com.apple.logic.pro 0x002b75e3 0x1000 + 2844131
13 com.apple.logic.pro 0x00012e8c 0x1000 + 73356
14 com.apple.logic.pro 0x0019534e 0x1000 + 1655630
15 com.apple.logic.pro 0x004d3c78 0x1000 + 5057656
16 com.apple.logic.pro 0x0051f9db 0x1000 + 5368283
17 com.apple.logic.pro 0x005205f9 0x1000 + 5371385
18 com.apple.AppKit 0x94753040 -[NSDocument readFromURL:ofType:error:] + 743
19 com.apple.logic.pro 0x00520410 0x1000 + 5370896
20 com.apple.AppKit 0x9463eddd -[NSDocument initWithContentsOfURL:ofType:error:] + 311
21 com.apple.AppKit 0x9463e981 -[NSDocumentController makeDocumentWithContentsOfURL:ofType:error:] + 383
22 com.apple.logic.pro 0x0053d6d3 0x1000 + 5490387
23 com.apple.AppKit 0x9463e739 -[NSDocumentController openDocumentWithContentsOfURL:display:error:] + 886
24 com.apple.logic.pro 0x004d8b79 0x1000 + 5077881
25 com.apple.Foundation 0x923d5588 nsnotecallback + 345
26 com.apple.CoreFoundation 0x9851f793 __CFXNotificationPost + 947
27 com.apple.CoreFoundation 0x9851f19a _CFXNotificationPostNotification + 186
28 com.apple.Foundation 0x923ca384 -[NSNotificationCenter postNotificationName:object:userInfo:] + 128
29 com.apple.Foundation 0x923d7789 -[NSNotificationCenter postNotificationName:object:] + 56
30 com.apple.AppKit 0x94423422 -[NSApplication _postDidFinishNotification] + 125
31 com.apple.AppKit 0x94423332 -[NSApplication _sendFinishLaunchingNotification] + 74
32 com.apple.AppKit 0x9457a4ed -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 274
33 com.apple.AppKit 0x9457a10d -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 101
34 com.apple.Foundation 0x9240a7a4 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 511
35 com.apple.Foundation 0x9240a568 _NSAppleEventManagerGenericHandler + 228
36 com.apple.AE 0x92dc8f58 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 166
37 com.apple.AE 0x92dc8e57 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 43
38 com.apple.AE 0x92dc8d61 aeProcessAppleEvent + 197
39 com.apple.HIToolbox 0x97a07389 AEProcessAppleEvent + 50
40 com.apple.AppKit 0x943f39ca _DPSNextEvent + 1420
41 com.apple.AppKit 0x943f2fce -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156
42 com.apple.AppKit 0x943b5247 -[NSApplication run] + 821
43 com.apple.prokit 0x0210df5c NSProApplicationMain + 326
44 com.apple.logic.pro 0x00003942 0x1000 + 10562
45 com.apple.logic.pro 0x00003869 0x1000 + 10345
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x9124f982 kevent + 10
1 libSystem.B.dylib 0x9125009c dispatch_mgrinvoke + 215
2 libSystem.B.dylib 0x9124f559 dispatch_queueinvoke + 163
3 libSystem.B.dylib 0x9124f2fe dispatch_workerthread2 + 240
4 libSystem.B.dylib 0x9124ed81 pthreadwqthread + 390
5 libSystem.B.dylib 0x9124ebc6 start_wqthread + 30
Thread 2: com.apple.CFSocket.private
0 libSystem.B.dylib 0x912480c6 select$DARWIN_EXTSN + 10
1 com.apple.CoreFoundation 0x98540c83 __CFSocketManager + 1091
2 libSystem.B.dylib 0x9125685d pthreadstart + 345
3 libSystem.B.dylib 0x912566e2 thread_start + 34
Thread 3:
0 libSystem.B.dylib 0x912290fa machmsgtrap + 10
1 libSystem.B.dylib 0x91229867 mach_msg + 68
2 com.apple.audio.midi.CoreMIDI 0x025090c1 XServerMachPort::ReceiveMessage(int&, void*, int&) + 155
3 com.apple.audio.midi.CoreMIDI 0x0252797a MIDIProcess::RunMIDIInThread() + 150
4 com.apple.audio.midi.CoreMIDI 0x0250a2d9 XThread::RunHelper(void*) + 17
5 com.apple.audio.midi.CoreMIDI 0x02509ca6 CAPThread::Entry(CAPThread*) + 96
6 libSystem.B.dylib 0x9125685d pthreadstart + 345
7 libSystem.B.dylib 0x912566e2 thread_start + 34
Thread 4:
0 libSystem.B.dylib 0x9124ea12 _workqkernreturn + 10
1 libSystem.B.dylib 0x9124efa8 pthreadwqthread + 941
2 libSystem.B.dylib 0x9124ebc6 start_wqthread + 30
Thread 5:
0 libSystem.B.dylib 0x9124ea12 _workqkernreturn + 10
1 libSystem.B.dylib 0x9124efa8 pthreadwqthread + 941
2 libSystem.B.dylib 0x9124ebc6 start_wqthread + 30
Thread 6:
0 libSystem.B.dylib 0x9124ea12 _workqkernreturn + 10
1 libSystem.B.dylib 0x9124efa8 pthreadwqthread + 941
2 libSystem.B.dylib 0x9124ebc6 start_wqthread + 30
Thread 7:
0 libSystem.B.dylib 0x912570a6 _semwaitsignal + 10
1 libSystem.B.dylib 0x91282ee5 nanosleep$UNIX2003 + 188
2 libSystem.B.dylib 0x91282e23 usleep$UNIX2003 + 61
3 com.apple.AppKit 0x9455cfe1 -[NSUIHeartBeat _heartBeatThread:] + 2039
4 com.apple.Foundation 0x923d5bf0 -[NSThread main] + 45
5 com.apple.Foundation 0x923d5ba0 _NSThread__main_ + 1499
6 libSystem.B.dylib 0x9125685d pthreadstart + 345
7 libSystem.B.dylib 0x912566e2 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x913328e1 ecx: 0xbfffde9c edx: 0x9128a176
edi: 0x1ed7c800 esi: 0x251df830 ebp: 0xbfffdeb8 esp: 0xbfffde9c
ss: 0x0000001f efl: 0x00000286 eip: 0x9128a176 cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x010b7818

Hi, ish1919.
Have you updated the drivers for your hardware? An OS update sometimes needs later drivers. Older ones can cause conflicts. Check the manufacturer website [eg. RME] for your hardware and get the latest version.
Hope this helps.
Scorpii.

Need help regarding Cisco 1841 Router

hello everyone , i am need of help regarding configuring of FE 0/1 port. our company have a cisco 1841 router. The serial 0/0/0 is connected with VSAT for internet. The FE 0/0 is connected to switch(LAN) through which net connectivity is provided to all users. Recently a new VSAT has been installed at our site,with different IP series. So every time we want to switch between the two net connectivity we need to change the entire IP configuration of all users, which in turn prohibits the users from accessing the printers,data servers etc which are been set to our existing IP series. So, my idea was to configure the FE 0/1, so that just by changing the DNS will help us providing internet along with all other devices without changing the entire IP series. The new VSAT modem has a lan cable which can be connected to FE 0/1. Can any one help out in solving the problem. Our existing IP series is 192.168.3.1..... and the new VSAT series is 10.205.74.1......

Bao
Do I understand correctly that you will have 20 remote users who will telnet to the 2511 and from the 2511 will use reverse telnet to access the console of router1, router2, router3, etc which have their console ports connected to async ports of the 2511? If that understanding is correct then the firewall only needs to open TCP port 23 for telnet. The other ports (2001, 2002, etc) are between the 2511 and router1, router2, etc and will not be seen by the firewall. If my understanding is not correct then please clarify.
I do not believe that you will find an image for the 2500 that supports SSH.
HTH
Rick

Need help with cisco 881 configuration.

Hi, I have cisco 881 wireless router, and I need to configure this as a switch, I have dhcp server in network 192.168.12.254, and I need that cisco wifi and lan clients get IP addresses from existing dhcp server.
I connect wire from network (with dhcp server) to FastEthernet0, create vlan interface (192.168.12.10 255.255.255.0), described vlan on other FastEthernet interfaces, so LAN clients get IP addresses from my dhcp server without problems, but how to do the same with wifi clients?

Follow this support doc because you need to trunk the AP to the router and specify the vlan the wireelss clients will be on.
https://supportforums.cisco.com/docs/DOC-16145
Here is a doc that guides you through multiple vlans/subnets on access points:
https://supportforums.cisco.com/docs/DOC-14496
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Need help fixing video shut off after 2 minutes in non-windows mode

Good morning experts in this forum, I need your help solving a hardware/firmware problem of my computer. I have a Hpe 250f computer with Radeon 5700 series video card on it. I recently noticed one strange problem which prevents me from doing any meaningful work in non-windows mode: The video will be shut off after around 2 min if the computer is not in Windows mode. This includes BIOs mode and recovery mode. There is no problem if the computer logs on Windows within 2 minutes. But if I stay in BIOs settings or try to use HP diagnostics or try to recover a backup using windows backups for around 2 min, the monitor will turn blank and the power button of monitor will turn yellow from green indicating no video output to it. It can not wake up by mouse or keyboard. I read that older BIOs have problem with fan speed and I reflashed the BIOs. But it did not work. This problem drives me mad since I had occasional hard drive failures recently and I could not recover my system (That is why I noticed the problem recently, but the problem could have existed when I bought the computer). Now the computer is out of warrenty and I could not find any similar case using Google search. I really appreaciate your help. Thanks

I had the same problem when I upgraded. In my case it definitely was the power supply. In my effort to figure out the problem by swapping components in and out, the dieing power supply killed 2 P8P67 Pro and 2 2500k, and when I tested with the P67A-GD65, the power supply totally died, but the good thing is that the GD65 survived. Swapped in a 430W to test and everything was perfect. At full load with GTX260, it will draw less than 300W, so your power supply is fine to test.

Need Help reactivating cisco valet plus after 2 yrs

Similar Messages

Maybe you are looking for