Need Help Reattaching internal Printer Parts

I recently purchased a used LaserJet Pro MFP M225dw unit from Amazon Warehouse. After setting it up, I printed a page and it came out very crooked. I opened the printer up and found a couple of parts floating around in the bottom. After removing them, everything seems to work great, but I'm concerned about the parts. They seem to be opposite arms. One has an additional piece attached that appears to be missing from the other. The arms have part number RC2-9515 and RC2-9516, respectively, and Google identifies them as levers for the fuser. The part number on the additional piece is: RC2-9531, which Google says is a pressure release link. I prefer to not have to return the printer, so I'd like to reattach the parts, if necessary, and am looking for someone to give me a little direction. Thanks in advance.

Hello , I've looked into this further for you, and I'm not seeing these parts as being customer replaceable - meaning I can't find any information or documentation on how to re-attach them. Since you said it appears to be working, if you look inside the printer do you see simular parts still attached inside?Could these just be extra parts that don't actually belong? I really recommend Contacting HP Support for further assistance. Fill in the model number and the form to receive a case number for quicker assistance. I wish I had more information for you. Thanks,

Similar Messages

I need help getting my printer to work

I need help getting my printer to work

http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Need help getting new printer hp deskjet 3520 setup for eprint and wireless

need help getting new printer hp deskjet 23520 stup for eprint and wireless

Hi Pastorlee7,
I see that you're having problems setting up your printer. I would take a look at the document below.
Hp deskjet 3520
Let me know how it goes.

Need help with duplicate print jobs over network that I can't cancel

I have the Photosmart Premium All-in-One on my home network. My kids who each have laptop running Windows 7 and are connected via wireless to the printer via a DLINK DIR-655.
They hit the print button too many times and it keeps printing over and over again.
Is there a way to get the printer to stop printing these duplicates. I tried turning off/on but they just keep printing.
We're wasting paper/ink and I need help with a solution.
Please let me know. Thanks.
Angelo

There should be a button with a red 'X' on it on the front of the printer. This is the print cancel button.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I need help trying to print ,move and resize multiple images on a page to print!help!

can anyone give me to some advice. I was using an older version of photoshop elements where i could position the image i wanted to print on the page. I could resize it, move it around and add more photo's. I print small images that I cut out for jewelry making and need to be able to add 12 small images to a 4x6 print size page. My new elements is not allowing me to do that! I'm frustrated and need help!! thanks!

It should work just the same as before: create a blank document, place your images on it, then print it. The only difference is that you can't change the position of the image in the print window anymore.

Downloaded Epsom printer app need help to set printer up on iPad 3

Need help to set up Epsom printer to ipad3 downloaded Epsom app can find the printer but don't know where to set up

It's Epson, not epsom. Epsom refers to epsom salt (magnesium sulfate).
... Anyway, iPads don't have printers directly set up. You might interface with a printer over a WiFi. That could be done either using Apple's AirPrint (if the printer is new enough) or maybe you have Epson's iPrint utility.
If you have the iPrint utility, you simply open the utility, click the "maintenance" button in the lower left, and select the "Printer" on the top and set it up there.

I need help in the filereader part 2

my loop doesn't stop...i cant fix it..please help me
public static void main(String[] args) throws FileNotFoundException{
     int howMany=0;
          int[] numbers;
          Scanner inFile = new Scanner(new FileReader("sum.txt"))/*.useDelimiter("\\s*,\\s*")*/;
     while(inFile.hasNextInt()){
               howMany++;
     System.out.println(""+howMany);
     inFile.close();
the textfile is
7 3 8 8 1 0 2 7 4 4 4 5 2 6 5
i need help badly

i got it...sorry misunderstood what you said...my problem now is that...when i use the delimiter and try to read the file again...it prints 0....the text file is
7
3,8
8,1,0
2,7,4,4
4,5,2,6,5
i dont know what happened this time...it cant even read the first integer

Need help with Automating Printer and LPR installation

I work for someone who has a need for automating the print installation of LPR print port to mac laptops. Obviously this will need to cover anything OS X 10.3 and above. All of this needs to be done command line via a batch file of sorts.
I am a windows and Linux guy, however I just bought a Mac and starting to like the new Leopard OS and the capabilities of boot camp.
What I need:
1) how to install LPR port to the laptop
2) installing a printer from a some sort of cab file with correct port and drivers. (in windows we use print migrator, however the cab files we use for windows will obviously not work with different port types and drivers)
3) finally some clean up type script that will clean up any temp files I had to create or such.
I kind of need this soon so if anyone knows how or could point me in the right direction. It would be greatly appreciated.

If you force restart the computer on the freeze up, or force quit the printer adding window, does the printer appear in the print and scan system preference? In other words, did the printer successfully install? (is it possible that the setup part of the install failed, but the actual install worked?)
If so, you might be able to set the configurations yourself.
Open up the print and scan system preference. Double click on the printer.
When the printer queue window opens up, you should be able to click on the printer setup button.
Go through all the tabs and set things up the way you like.
HTH
-Graham

Need Help With HP Printer

Currently I have a HP 2610 AIO printer. It works great, for the most part. I have noticed though that the footers in the MS Word 2004 default margins, as well as margins in Pages and Adobe Reader 7 all get cut off at the bottom. Even though if I transfer the document over to my PC with Word 2003 and Adobe Reader 7 the document prints fine.
I tried contacting HP today, but I probably won't see a response till Monday so I am asking people here. Is there a way to fix this issue with HP printers? Is there a third party driver, or default Apple drive that could be used to overwrite the default and hopefully this fix this bug?
BTW so far I have tried the following:
-uninstalling Office and reinstalling
-uninstalling HP software + drivers & reinstalling
Is there a preference file or some other file that would reset to a default if I remove it?
I am looking for any and all answers I can find at this point because so far from searching the Pages forum here, as well as the Google Newsgroup for MS Word 2004, there doesn't seem to be any way to solve this problem.

I figured out that I needed to select Borderless printing. Otherwise Mac OS X doesn't properly recognize the proper bottom margin of my printer.

Need help to find printer setup utility

I recently bought my first Mac and have slowly been adding to it over the last couple of weeks. Today I added a new printer that I wish to connect wirelessly. The printer is a Brother MFC-3360. I installed the software that came with the printer and had the printer connected directly to the Mac Book. It printed just fine.
I then disconnected the USB cable and plugged it into the Extreme Base station. It failed to print. According to the Extreme manual, I need to open printer setup utility, located in the utilities folder in the applications folder. Then from there I need to add the printer.
The problem is, I have no printer setup utility. Is there another place where it might be located?
Any other ideas will be much appreciated. Thank you!

Found problem. Went to Sys prefs -> Printers and Fax -> removed my printer and re-installed. Works like a charm.

I need help putting my printer together hp photosmart cn218a b210a how do u find a book on it

i need help putting it together i had to take it apart there was dog food jammed in it the mice

Here is a link for the manual.
http://h10032.www1.hp.com/ctg/Manual/c02456532.pdf
Here is another link for a video on putting the cartridges in.
http://www.youtube.com/watch?v=gbZkq01F7do
""Click on the WHITE STAR if you would like to say THANKS""
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Need help finding the Motherboard parts number on Ideacentre B520

Hi guys,
I'm currently repairing an ideacentre B520 for a customer and need to have the MB parts # to have the parts ordered.
i've found a white sticker with somes number on it but I don't know which one is the MB parts number.
Here the number:
27*939530*126
1a*2
4*mfg: 1*2 (in bold)
PL*00:u0* (in bold)
46*9ae9*l01
and the last one on another sticker.
MB 11s1*013462z*0mP17*043 A*<
(I've put somes * instead of caracters on purspose.
Thanks

Hi,
The Motherboard part number starts with 11......
If you download the Hardware Maintenance Manual from the Lenovo Support site, all the part numbers are there, as well as removal instructions.
Good luck!
CB2011

Need help to get serial part working

i use this lap top to tune my race car because it has the serial port. every time i tun on my laptop i get " Your network adapter SMC IrCC (Infraded Communications Controller) (0007) is not working properly. You may need to set it up again. For more Information, see Network Troubleshooter in Windows Help." i have tried to look for the help and have tried to solved the problem but, i still get the same message when i start up the laptop. any help will be great.
thank

You said serial port, the nine pin port on the computer? If so then just disable the infared port on the computer as most people don't use these. Just get into Device manager on your computer through control panel, System.
If you need the IRDA, infared port, then just try reloading drivers for it, or try rolling back the drivers. If you need mroe help then whatversion of windows are you running and what do you need help with?
This signature left intentionally blank.

Need help identifying internal parts on pavilion dv9930 laptop

Need to know and get pictures of internal parts and indentfy what im missing next to the memory on a hp pavilion laptop model dv9930 looks like missing some type watch battery also something with 3 wires tha are numbered on a computer that was given to me and also what type of power cord would I need please help so I can determine if it is worth fixing really need a computer trying to get back in school and just got outof prison so not much money to work with any help not much knowledge of computers but believe I can do if get diagrams or pictures

The Maintenance and Service Guide here should help. The Dv9930 is part of the dv9500/9600/9700 series.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lang=en&lc=en&product=3647038&
You may have to get an AC Adapter at third party site such as these. (No personal recommendations)
http://www.topmicrousa.com/hp-pavilion-dv9930us--dv9933ca--dv9933cl-ac-adapter.html
http://www.laptopbatteryonline.net/original-65w-hp-pavilion-dv9930us-dv9933-dv9933ca-ac-power-adapte...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Need help returning (not printing) avg GPA from array??

Here's what I have so far. After returning the value then I gotta print the avg in a separate method. I also need to check the names of the first and last student using an "equals" method. Please someone help with whatever you can. Here's what I got:
import java.util.Scanner;
public class StudentLists {
//Main method. Prompts user for the number of students.
   public static void main(String[] args) {
   Scanner in = new Scanner(System.in);
   System.out.print("Please enter the number of students in this class: ");
   int s = in.nextInt();
   Student[] students=new Student[s];
   FillStudents(s,students);
   printAll(students);
   public static void FillStudents(int s, Student[] students){
   for (int i=0; i<s; i++)
        Scanner inf = new Scanner(System.in);
        System.out.println("Please enter student's first name: ");
    String first = inf.nextLine();
    System.out.println("Please enter student's last name: ");
        String last=inf.nextLine();
        System.out.println("Please enter the number of credits completed: ");
        int c=inf.nextInt();
        System.out.println("Please enter student's GPA: ");
        Double g=inf.nextDouble();
        students[i] = new Student(first, last, c, g);
    public static void printAll(Student[] students) {
    System.out.println("Names      Credits GPA");
     for(int i = 0; i < students.length; i++)
    System.out.println(students);
public static Double getAvg(Student[] students, Double g){
double sum=0.0;
double avg=0.0;
for(int i=0; i<students.length; i++){
sum+=g;
avg=sum/students.length;
return avg;

Oh no I wasn't giving any orders. I was saying I have been trying to edit what I have, but I can't figure out how to get the method right to do my average of the GPA from the loop. I don't know what to put in there. I was just asking if you would write it and then kind of explain what u did for me please.
import java.util.Scanner;
public class StudentLists {
//Main method. Prompts user for the number of students.
   public static void main(String[] args) {
   Scanner in = new Scanner(System.in);
   System.out.print("Please enter the number of students in this class: ");
   int s = in.nextInt();
   Student[] students=new Student[s];
   FillStudents(s,students);
   printAll(students);
   public static void FillStudents(int s, Student[] students){
   for (int i=0; i<s; i++)
        Scanner inf = new Scanner(System.in);
        System.out.println("Please enter student's first name: ");
    String first = inf.nextLine();
    System.out.println("Please enter student's last name: ");
        String last=inf.nextLine();
        System.out.println("Please enter the number of credits completed: ");
        int c=inf.nextInt();
        System.out.println("Please enter student's GPA: ");
        Double g=inf.nextDouble();
        students[i] = new Student(first, last, c, g);
    public static void printAll(Student[] students) {
    System.out.println("Names      Credits GPA");
     for(int i = 0; i < students.length; i++)
    System.out.println(students);
public static Double getAvg(Student[] students){
double sum=0.0;
double avg=0.0;
for(int i=0; i<students.length; i++){
avg=sum/students.length;
System.out.println(avg);
return avg;

Need Help Reattaching internal Printer Parts

Similar Messages

Maybe you are looking for