Need help recording fast!

my recording button wont record the program, it reminds
i high light the program and record and it has a red circle with a check near the title of the show.
i tried going to tv listing and pressing the record button twice but the second time it asks to cancel the "reminder"
also when i click DVR the optiong "create recording" isnt there

If yoou are trying to set a recording on a DVR from the STB and the DVR is recording two items, it will not let you record a third. The DVR only has two tuners. That is why the option to record is not available on the STB. If this is what you are seeing.

Similar Messages

Need help recording live drums on seperate tracks.

I used to be a professional recording engineer, and as such took pride in knowing my way around a console. But with GB I am stumped.
I need to record a live drummer, and subsequently place each drum on a seperate "track" as when recording analog.
Being totally new to hard disc recording, means learning all over again. Drums are set & miced, what do I need to make this happen (or is it even possible in GB)?
Watched the seminar for Logic, and sure enough there was a drum kit properly recorded on individual tracks, but they gave no detailed explination of how that was done.
Thanks for all help. I'm retired now, and looking for something to fill my time.

Basically you select the channels for each track in
the DAW. In this case GB.
At the bottom of the 'track info' window on your real
instrument (mic) tracks use the 'input' pulldown menu
to assign channels for each mic for each track you
wish to record on.
In case you are not familiar enough with GB.
If the track info window is not open. You can open it
by double clicking on the track, or under 'Track'
menu use: Show Track Info.
Or keystroke: 'Command I'.
The available channels will be available and show in
the input pulldown menu.
So basically you will want an interface with the
right I/0.
Depending on what you may have been used to in the
past for analog quality.
You may wish to take some time to research what's
available for the right amount of I/O with good pre's
and conversion. There is definitely a line of
demarcation in the quality of analog circuits and
digital converters and clock.
It may or may not matter to you, I don't know but
judging from your past and post maybe worth a
mention. However, I don't know to what standards you
wish to work in.
Standards such as Alan Parsons, Geoff Emerick, and Jeff Lynne.
Also if you want to use outboard analog while
tracking with an interface you may want to have
insert I/O available.
And of course if you are wanting to use bussing
sends, complete editing, etc. within your DAW you
will want start looking at other DAW's like Logic or
PT or DP, etc.
Thanks, I want to get started with GB, and have some basic tracks laid & get Logic in a couple of months. Got to have bussing send/recieve for fx on SN, EQing the kit, compression, etc.
If you are not familiar with other forums here are a
couple that may be of interest to you.
http://recforums.prosoundweb.com/
http://www.gearslutz.com/board/
Mac based:
http://www.bigbluelounge.com/forums/index.php
Lots of great info here, thanks.

Need help Recording G-Force VST's Like MInimonsta and M-Tron

Hello everyone!
Having a great time with logic pro 7 so far,
I need some help recording my G-Force synths.
Do I use the instrument,Rewire, or Audio tracks?
Any basic setup tips would be golden!
Thanks Folks
Abe
1.5 ghz, 1 gig ram Mac OS X (10.3.9)

You should be using the AU versions... any reason not to or was the VST term used as a generic term for softsynth? They are avalable as AU.
You would use an Audio Instrument track and then where you would set the input if it were an audio track... in audio instrument this is a pop up for your softdynths/samplers.
Once you are ready to commit them as audio files then use "export track as audio file".
J

I very need help and fast my ipod touch 4 is dented on the top left corner and the screen is not in the silver part and because of that i think...when i open my ipod half of the screen is light white

hi i very need help my ipod touch 4th was already damages (the glass screen wasnt in the silver part) and yestarday i was cleanin my room while listeng to music and my ipod fell 2 times after about 30 min half of the screen was light white first i thought it was a virus so i fully shut down my ipod and i also restored it but it didnt work so looked closly and saw that the left corner on my ipod was badly dented inward after i thought for a bit i thought that the spary i was using to clean my room could have gone in my ipod because the glass screen wasnt in the silver prt but i dunno if this prob cant be fixed at home by me does someone know how much it will charge 2 get it fixed and where i can get it fixed THANKS it wuld be a great help plz reply as soon as possible xoxoxox

This has happened to me but i don't know what to do because my Itunes kept closing down and it shut down half way through updating and it just comes up with a silver apple and it won't turn off and now it's just frozen and it also doesn't recognise it when i opened up itunes again after i reset it to the factory settings

Need Help Badly Fast

i really need help this is first ipod its an ipod nano 2nd generation so i have no idea what im doin lol but my problem is when i open i tunes and try to go to my device it keeps on saying your regestration session timed-out i tried everything peoples please help

It is not an error. With Reader, the form has to have Reader Rights added to allow the save of the data. However, you should read section 15 of the EULA to be sure you are abiding by the limitations imposed on Reader Rights. The number of 500 uses shows up, but it depends on the form of use.

Need help recording three shows at the same time

I have the FiOS DVR, and have a problem this TV season. There are 3 shows that we watch that are on at the same time. if we are home that night, we can record two on the DVR and watch the other in another room. Not ideal, but we can handle it. But if we are out, we are hosed. I have an old series 1 Tivo that I would think I could factor in here....which I could timer record on a different TV. Any way to do it on my regular TV? Not sure how I could hook up the Tivo with the DVR and the rest of it.
Thanks!
Alan

DocAlan02 wrote:
I have the FiOS DVR, and have a problem this TV season. There are 3 shows that we watch that are on at the same time. if we are home that night, we can record two on the DVR and watch the other in another room. Not ideal, but we can handle it. But if we are out, we are hosed. I have an old series 1 Tivo that I would think I could factor in here....which I could timer record on a different TV. Any way to do it on my regular TV? Not sure how I could hook up the Tivo with the DVR and the rest of it.
Thanks!
Alan
I have a similar setup with a Replay.
You will need to get a Verizon Digital Adapter for $3.99 per Month and an IR Blaster for your Tivo.
Connect the Digital Adapter (DCT-700) to the FIOS Coax (May need to use a Splitter). Connect the Composite Out cables from the DCT-700 to the Tivo. Connect the IR Blaster from the Tivo to the front of the DCT-700. Configure the Tivo and tell it you have FIOS Cable and Digital Adapter. You may need to find the right codes to use to control the FIOS box from the Tivo.
Once you get it configured you will be able to tell the Tivo to record the 3rd program and it will switch the box to the channel and record it. If the box is near your other Verizon STBs you will need to hide it or cover the IR Sensor so that the remote for the main STB does not control the Digital Adapter.
As an added bonus you can connect the Coax Out from the DCT-700 to your Main TV if it has PIP and now you have a 2nd input source to make PIP work.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Need Help Recording From a PC to Final Cut Pro

Ok First forgive me for my inexperience I'm a Audio Engineer trying to help out my company, because our Video Director left. I work for a Video Game Development company and we always have to record in game video for commercials and this is really becoming a pain to me. The game plays on the PC and I have to record it in small HD segments using a program called fraps because none of the 2 Gig or larger AVI files I record can be opened on the Macs, so I have to go through this crazy conversion process to actually get them to the company that makes our TV commercials. I was Wondering if any of you knew if there was a Box that would let me play the game on the PC and then connect that output to the Mac and Record it in HD directly in Final Cut Pro, and then send that Final Cut Pro Project to the Commercial company. Like using the DVI output of the PC's Video card to a box then output to firewire on the Mac or something like this? Again sorry for my lack of experience and the long post just need some help
Thanks

Short answer yes. Longer one is you'll have to look around to find a solution that works for you. There are converters/scalers that will go DVI to video (HDMI) but then you need a capture card for the FCP system. One possible way is two Intensity cards from Blackmagic Design. Put one in each computer and connect them.
TonyTony

I need help recording on my iPad using iRig

I know that the iRig will work for Garage Band but I need to know it it can play back. Like if I were to play the recorded audio back would it come through an amp if I wanted it too. Also, on microphones that plug directly into the headphone jack there is a third ring around the 1/8in jack that is used for sending audio into the device...what is that called?! Do they make a 1/4in to 1/8in cable that has that third ring?
I would really appreciate some help. Thanks.

Nothing. They'll still play if you have flash installed on a PC. But most website developers should be migrating them to the friendlier HTML 5 video container that plays on many more devices across the board including iPhones and iPads and other mobile phones and tablets.
As far as Adobe, they just stopped development of their mobile version of Flash. (i.e for Phones and tablets).
They themselves as a company are not going away, so their other products such as the PDF reader and Media creation suites and yes the desktop version of Flash are still going to be made.

I need help recording guitar

I want to use Garageband to record my guitar music. Money is not an issue. I'll buy some gear if I need to. I just don't know where to begin or what to buy. I just want to record from my acoustic electric guitar and maybe lay some rhythm tracks over the top. Mostly just guitar so I can create a archive of my compositions. Put a halfway decent sounding CD together. Any ideas? Where does one begin.

poflynn wrote:
I use a Rode NT2000 condenser Mic and a Beyerdynamic dynamic mic. I also plug the guitar in and record 3 tracks at a time.
Out of curiosity, where do you place each mic and which Beyerdynamic do you use? (oh, and what kind of guitar do you have)?
The Beyerdynamic is a TGX 58 http://asia-pacific.beyerdynamic.com/en/music-performance/products/microphones/v ocals-speech.html?txsbproductdatabase_pi1%5BshowUid%5D%5BshowUID%5D=3&tx_sbproductdatabasepi1%5BshowUid%5D%5BbackPID%5D=49&cHash=e15356a2b4
It was the first mic I got and its probably not the best choice. I have it as a multi purpose mic.
In terms of mic placement I am constantly tweaking. Right now the NT2000 is in front of the sound hole about 1ft-300mm away. The TGX 58 is positioned about half way between the sound hole and the head, slightly closer than the NT. I must admit though its the result of 'monkey see, monkey do.' I got the info from this site http://www.recordacousticguitar.com/ I am currently not happy though with my results. My studio room has to take a large portion of the blame. Its layout and acoustic treatment was not very well thought out, but I am not sure where to begin to correct it. Also, getting to know the mics has been hard. The NT has some adjustments available but I am afraid my 'ear' is still on the steep side of the learning curve. One thing I have noticed is the mics ability to pick up sympathetic string resonance. Its hardly noticeable when listening to the guitar live, but upon playback its maddening. My current project involves recording some of my beginner students compositions. They are single note 1st and 2nd string melodies. I have resorted to shoving a folded piece of card board under strings 3-6 simply to damped the strings. When I just plug the guitar in and record via the bridge pickup, the sympathetic humming is less than what comes from the NT. Once done I then just muck around with all three tracks with fx etc (thats another story).
I use 2 acoustic guitars with bridge pickups. My nylon string guitar is a Greg Bennett C2CE http://www.gregbennettguitars.com/c2ce.html
My steel string is a Yamaha CJ-838S II similar to this one http://www.guitar-museum.com/guitar-231-VINTAGE-YAMAHA-CJ-838S-II-ACOUSTIC-GUITA R . I have had this instrument since new in 1984. I had a pick installed when I had some fret work done and the action reworked in 1993. Its a nice guitar.
Trying to record halfway decent acoustic guitar has not been easy. I am hardly ever pleased. I don't know if I am picky or simply don't know what I am doing. Probably a combo of both. It dosn't help that I have crap monitors as well.
Cheers. G.

Rookie needs help recording DJ set through M-audio Firewire 410

Ok.... ive been reading through the forums and I still can't find help...
Im running GB 3 that came with my Macbook I bought about 4 months ago.
I am a DJ and I trying to record a DJ set/demo.
What I use to DJ is Pioneer cdj-800 x2 and a Pioneer DJM400 using Rane Serato Scratch through my Mac.
I recently bought an M-Audio Firewire 410.
I installed all necessary drivers from m-audio's website (i bought it on ebay so it did not come with the install cd).
I connect the Maudio into the Mac as instructed and set all my inputs/outputs in prefs to the m audio.
The record out of my mixer is via rca so i bought an rca to 1/4" cable. The rca going into my mixer and the 1/4" is going into the first "mic/inst" on the interface.
I created a real instrument track on a new project in GB and set the input to channel 1 (mono).
I play a track..... no sound. nothing at all. i tried the inputs in the back of the firwire and played with the gains. still nothing. i am getting a little frustrated here as you can imagine.
I would really appreciate if someone could walk me through this or at least point me in the right direction.
Thanks a ton in advance.
Message was edited by: defman13

Perhaps you may need to reinstall the driver again from the M-audio website. The newest drivers don't work well but if you're running the newest OSX 10.4.10 then you have no choice but to use the newest drivers. When installing the new driver, do not have the 410 hooked up to the computer. After it is installed, shut down the computer. Hook up the 410, then turn the computer on, make sure teh 410 is power button is on as well. Once you're computer is up and running, open up the m-audio mixer application that comes with the driver. on the top right-hand corner is a reset button. Click that and a there will be a popup asking if you want to reset, say reset. Next open up system preferences and check the sound. Select the 410 for input and output. You have to also do this again in garagebands prefs. Test your audio out by playing a song through itunes or something. Hope it works.

Need Help Recording Programs from my DVR to my VCR

Can someone please tell to reocrd a program from DVR to my VCR without getting all snow
Here is my set up
TV- Sony
VCR/DVD- Sony SLV-D300P
DVR- QIP7200

How many threads do you need for the same question? This was asked HERE and answered, but you seem incapable of taking the instructions given successfully.
Yellow from DVR Video Out to VCR Video In
White from DVR Audio Left Out to VCR Audio Left In
Red from DVR Audio Out Right to VCR Audio Right In
The inset color of the RCA jacks (color inside the silver ring) matches the cables.
Set VCR to LINE INPUT, play the DVR recording and record on the VCR. If that is too difficult then get Geek Squad or someone who understands how to connect components. The connections are also shown in the DVR manual.
I have been using this exact set of connections for 2 years and it works fine.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Can Premier Pro Do This...???...(need help w/ FAST photo montage!)

well folks...
i'm really in trouble
i moved sony vegas (8.0) from my office pc to my recording/mastering studio's audio pc...(w/ it's quad IV cpu & tons of RAM)
& now...after moving along quite nicely...all of a sudden the project video screen (lower right) went completely RED...& the project doesn't repond to ANY controls...!!!...seized up tighter than a duck's protuberance.
(just like it did on my office pc)
I rebooted the machine, but that didnt help
so...i'll never make my deadline...on a very important dynamic photo montage i'm constructing for my brother's 50th wedding anniversay...so:
I know premier pro is wonderful for movie editing/creating...but...can it do a dynamic photo montage...???...the kind where one photo image transistions to the next...(w/ music)...& if so...does it have great transition effects & fades & text features (for that job) such as scrolling titles, etc...???
if not...can someone recommend me a program that DOES (in the vein of sony vegas)...???
thanx,
mark4man

i got it...i got it...!!!
so...this 1st screen shot is from an old scanned print; & you can see both pix X pix & document size:
obviously if i uncheck Resample Image...i can't change the pixel dimensions...so I simply did this:
so...is this now my optimum pixel dimensions for HD...(for that particular shot)...???
AND...it's OK that the document size differed (down to 2.283" X 1.8") while remaining at 600ppi...for HD...???
(see...i always assumed that, because there are a gazillion pixels on my 46" LED HD TV...I had to make my scan resolution as great as possible to fill that screen)...& you two are telling me that, because the pix dimension width is now 1080...that shot won't look pixelated (up-sampled) when the movie is played on an HD TV...???
if so...i'm good w/ the info you've given me (actually, great).
thanx a gazillion,
mark4man

Need help recording with two linked firepods and an outboard mixer

Hi!
Well I've been using Logic for a couple of years but always stayed "in the box".
Now that I started working out of the box I encountered a strange problem. Let me explain...
Since recently I have an analog Soundcraft Ghost mixer and two firepods. I linked the two firepods (aggregate device) and recorded 16 tracks into Logic. I sent these back to the mixer through the outputs of my firepods (I used the I/O plugin on each track to get a mono output).
I made the whole mix on the mixer and now I want to record that mix back into logic (in order to have a Stereo mix ready for mastering).
I thought all I had to do was create a new stereo audio track in Logic (choose input i.e. 1-2), connect the master output from the table to input 1-2 on my firepods, set the gain on the preamps. Arm the track, hit record.
Now the problem I have is that what is recorded sounds reeeaaaally strange. It's like distorted or some kinda feedback. Bit difficult to explain. But it sure doesn't sound right at all...
Does anyone knows what the problem could be?
Could it be that with the firepods you can't use an input if you allready use it's output?
If you need any more info, let me know!
By the way, I'm working on a Macbook Pro 2,4 with osx10.5.6 and Logic Pro 8.0.2
Greetz,
NLS

The problem sounds like you have a feedback loop between the outputs and the input. Here's my suggestion:
1 Turn the Mixer control on the Firepods all the way to the right, to make sure the Input signal is not mixed back in to the outputs
2 Mute the stereo Input channel that you're recording on (in Logic) before you arm the Record button
3 After you have recorded your mix into Logic, disarm the Record button, un-mute and solo the channel, then play back

Need Help recording a narration

Hi,
I am trying to record a narration for a slide show. I have a Sennheiser headset with a mic. I have a gateway tower and the green is pluged into the green and the pink into the pink at the back of the computer. I also have music on the slide show. I have windows vista. I printed out the create a narration instructions but there is no voice sound, I can hear the music. I turn down the music or delete it and still can't hear the voice.
On the audio mixer the little bars don't move so I am asuming nothing has been recorded.
I can't seem to test the mic through windows sound hardward test wizard because i can't find it on the computer. I go into the control panel and can't find anything that says voice.
There is only one choice on the default device menu.
I am doing something wrong here so help
tks sarah

There are four places to look, and I'd do it in this order:
1.) the Windows Sounds control panel, that Steve mentioned. Make sure that levels are up for the proper devices and that Mute is NOT checked in any.
2.) in PE, open up the Audio Mixer in your Project and check the Master buss. Also check each Track's pot and make sure they are not lowered, or muted.
3.) check your Audio Tracks (think that it's Rt-click), and make sure that Bypass is NOT checked. Do this for all Audio Tracks
4.) look in Edit>Preferences>Audio Hardware and make sure that nothing has changed there. Then look in ASIO settings and tell us what you have set there. Hint: a screen-cap of these settings will make it easier for all to see what your choices and settings are
Good luck,
Hunt

Need help recording with microphone!

Ok, I laid down all my electric guitar tracks for my song, everything went great, and the M Audio Fast Track USB box worked great. The trouble started when I tried to mic an acoustic guitar. I have a Shure SM58 that has a 1/4 inch plug, which I plugged into the guitar input of the box (I don't have an xlr cable to plug it into the mic plug). Even when I turned the ouptut and the gain switches on the top all the way up I barely got a signal for the track. I got enough to tune the guitar but it would'nt make much of a waveform when I recorded. In the info panel I chose Acoustic Guitars, then Bright, and set the Input Source to Mono 2 (Fast Track) and the Monitor to On. The recording level meter is grayed out and inactive so I can't move that up. Is there something I'm doing wrong? Do I have to get an xlr for the mic to work with the Fast Track box?
I also tried laying down some vocals and got the same problem. Ugh. Any ideas?

xSlamx wrote:
Even when I turned the ouptut and the gain switches on the top all the way up I barely got a signal for the track.
read this entry on plugging a mic into a mac, yours is the same problem:
http://www.bulletsandbones.com/GB/GBFAQ.html#micline
(Let the page FULLY load. The link to your answer is at the top of your screen)

Need help recording fast!

Similar Messages

Maybe you are looking for