Need Help Recording Programs from my DVR to my VCR

Can someone please tell to reocrd a program from DVR to my VCR without getting all snow
Here is my set up
TV- Sony
VCR/DVD- Sony SLV-D300P
DVR- QIP7200

How many threads do you need for the same question? This was asked HERE and answered, but you seem incapable of taking the instructions given successfully.
Yellow from DVR Video Out to VCR Video In
White from DVR Audio Left Out to VCR Audio Left In
Red from DVR Audio Out Right to VCR Audio Right In
The inset color of the RCA jacks (color inside the silver ring) matches the cables.
Set VCR to LINE INPUT, play the DVR recording and record on the VCR. If that is too difficult then get Geek Squad or someone who understands how to connect components. The connections are also shown in the DVR manual.
I have been using this exact set of connections for 2 years and it works fine.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

[Cisco FAQ] - How can I copy my recorded programs from my DVR to my PC?

Can I move copies from my DVR hard drive to my PC?

The ability to record or copy programming is categorized under specific copy protection specifications regulated by the FCC and set by the content providers.
In general, over-the-air or local broadcast programs should be set to copy freely, and allow you to make another copy for your pc or mobile device. Other subscription-based programming and premium channels may allow copying to your DVR, but might not be available to make extra copies. Additionally, PPV movies and events may be DVR recordable, but have a timeframe to view before it expires.
The copy protection on channels usually varies from provider to provider.

I need help with programs from my MacBookAir.

Hello. I've intalled programs on my MacbookAit that I don't need anymore and I have no idea how to remove them from my laptop. I've been a PC user and I knew there how to remove them but here I just don't know. I know that dragging them to the trash won't work. I want to remove them and free the space that is taking. I hope you guys can help me with this. Thank you Very Much!!!

Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper 2.0.1
AppDelete 3.2.6
Automaton 1.50
Hazel
AppCleaner 2.1.0
CleanApp
iTrash 1.8.2
Amnesia
Uninstaller 1.15.1
Spring Cleaning 11.0.1
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

Need help about transfering from my dvr to mac

Hi can anyone help me. I was wondering if it is possible to transfer tv shows to my mac with a firewire connection so I can burn to dvd and how do you do so and what programs do I have to use. Thanx in advance.

Hi blackalien,
Welcome to the forum.
The EyeTV solutions from Elgato Systems will be of interest:
http://www.elgato.com/

Can't Watch Recorded Programs from Other TVs

I recently had to replace my Verizon box that controls my main TV. Of course I lost all of my recorded programs. But the big issue is that now I cannot watch programs recorded on my main TV on the other two TVs that I have. Before the replacement I was able to watch recorded programs on any TV. Verizon also replaced my router as I had a very old one that was installed four or five years ago.
Can you help me with the remote TVs with regards to being able to watch recorded programs from the main TV box?
Thank you,
Hugh

The iPhone records video in the H.264 video codec, which should be included as part of your install of Quicktime. What version of Quicktime are you running? You might check and see if there is an update that you might need to install. Do you have problems playing videos on the Apple Movies Trailer website? If yes, then you might be missing the H.264 codec for some reason. If no, then maybe the file is getting corrupted somehow when you copy it from your iPhone to your PC. I've has instances where a file said it finished copying and I tried to play it and couldn't (I got the same message you got from Quicktime), so I copied the file again and the file worked the second time.
http://trailers.apple.com/

TS1389 I need help removing UAC from itunes..

I need help removing UAC from itunes so it will not allow me to open itunes. Everything I have read from other comments that you shouldn't turn off your user account control. I just to be able to open itunes. Can anyone help me with this problem?? Greg, ogrady612@yahoo,com

I had this problem too but you do not need UAC to be turned on.
Click on start and search for 'uac' in the search box at the bottom and click on 'Change User Account Control Settings' when it comes up. Move the slider to the bottom when the window appears and save the changes and your done!
It's worked for me and my uac has been off for months without causing me any problems!
Hope this helped

Need help coping project from one computer to another.

I need help coping project from one computer to another. I loaded all video on computer 1, copied events and project folder to computer 2. I was told I only needed to copy the project folder back to computer 1 since the events folder is already there. I copied project folder back to computer 1 but the files wont open. I dont have computer 2 available.
Please help!!!

Hi
No that's not the way to do it - iMovie gets confused and in some cases the problems might be un-repairable.
You've got several problems
• iMovie'08 - CAN NOT MOVE PROJCTS - You NEED iMovie'09 or iMovie'11 - I see no other working solution
• Never MOVE or alter any folder named
iMovie Projects - or -
iMovie Events
on DeskTop/Finder - This might be very harmful
• Moving (Projects) and Events - HAS TO be done within the iMovie Application.
You've got an Evets window and here You can view Your Events in two ways - Yearly - or - Yearly per Hard disk
Here You can move within this "window" to another location
• Projects - NO they do not contain Your full movie - only a document on howto use the material in Event folder
and there might be worse if You added Photos from iPhoto and Audio from iTunes/Garageband - then You have
to get this over to the second Mac too, to be able to continue editing.
So to move Your projects to another Mac You need
• iMovie'09 or 11
• an external hard disk -
MUST BE Mac OS Extended formatted - as UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO
Should be a FireWire one - as UBS/UBS2 performs badly when used for video
• Then move/copy over within Project resp Events window in iMovie Application
Hopefully I've been not to confusing or badly structured to be followed.
Yours Bengt W

I need help removing CS3 from Windows 7 so I can reinstall

I need help removing CS3 from Windows 7 so I can reinstall

Before trying to remove try re-installing CS3 right on top of the current install. Often re-installing Photoshop on top of itself fixes the install. If it does be sure to apply the cs3 updates.
Download Adobe CS4 and CS3 Free Trials Here (incl. After Effects) | ProDesignTools
your product key can be retrieved from here https://www.adobe.com/account/my-products-services.html
use these links for the updates.
Adobe - Photoshop : For Macintosh
Adobe - Photoshop : For Windows

Please i need help with switch from the us store to malaysian store how i can switch

Please i need help with switch from the us store to malaysian store how i can switch

Click here and follow the instructions to change the iTunes Store country.
(82303)

Need help recording from mp3 pla

my friend recorded songs from the radio on my mp3 player and i do not know how he did it.and he has moved.please any help would be greatly appeciated.thank you..i have the muvo tx fm mp3 .

when you're at radio mode, access the menu and I believe you should see a record menu or icon. if not, just check the user manual.

Need help recording three shows at the same time

I have the FiOS DVR, and have a problem this TV season. There are 3 shows that we watch that are on at the same time. if we are home that night, we can record two on the DVR and watch the other in another room. Not ideal, but we can handle it. But if we are out, we are hosed. I have an old series 1 Tivo that I would think I could factor in here....which I could timer record on a different TV. Any way to do it on my regular TV? Not sure how I could hook up the Tivo with the DVR and the rest of it.
Thanks!
Alan

DocAlan02 wrote:
I have the FiOS DVR, and have a problem this TV season. There are 3 shows that we watch that are on at the same time. if we are home that night, we can record two on the DVR and watch the other in another room. Not ideal, but we can handle it. But if we are out, we are hosed. I have an old series 1 Tivo that I would think I could factor in here....which I could timer record on a different TV. Any way to do it on my regular TV? Not sure how I could hook up the Tivo with the DVR and the rest of it.
Thanks!
Alan
I have a similar setup with a Replay.
You will need to get a Verizon Digital Adapter for $3.99 per Month and an IR Blaster for your Tivo.
Connect the Digital Adapter (DCT-700) to the FIOS Coax (May need to use a Splitter). Connect the Composite Out cables from the DCT-700 to the Tivo. Connect the IR Blaster from the Tivo to the front of the DCT-700. Configure the Tivo and tell it you have FIOS Cable and Digital Adapter. You may need to find the right codes to use to control the FIOS box from the Tivo.
Once you get it configured you will be able to tell the Tivo to record the 3rd program and it will switch the box to the channel and record it. If the box is near your other Verizon STBs you will need to hide it or cover the IR Sensor so that the remote for the main STB does not control the Digital Adapter.
As an added bonus you can connect the Coax Out from the DCT-700 to your Main TV if it has PIP and now you have a 2nd input source to make PIP work.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

I need help restoring data from my time machine.

1) On the time machine, where do I find the TRASH file that is located on the dock in my desktop? I'd like to restore that to a prior date but can't find it.
2) I DID A VERY BAD THING & need help to get back to where I was before. I wanted to delete files that were taking up lots of space. My OTHER section was using 160G. I downloaded OmniDiskSweep and found that 120G was being used by my virtual machine (I run Quicken in Windows, through VMware). I started to delete files that were called Snapshots assuming these were the snapshots that the program regularly takes of my files. Apparently they were not. I also deleted the program Windows XP Professional because that was never used. When I try to open VM or quicken program, it says it is missing a particular snapshot, i.e. Snapshot 11104. I deleted about 20 of these. I left all the other files that said Windows XP Home Edition. But now it shows that I only have the Professional Edition, even though that's what I deleted. I'm trying to restore from Time Machine and it looks like the information is not there - I've tried various different backups and nothing seems to have the information I need. The earliest back up I have is from 5/7 when I started time machine on a new external 1TB HD. Would that have the information I need since it's the very first back up? Please Help.

I am assuming it's real data because it's taking up storage on my HD. It falls in the category "other" and the total of this section is 160G. Here is a snapshot of the virtual machine.
I also took a shot of the VM snapshots & it tells how much space is being taken up by the snapshots.
I've now changed the number of snapshots taken down to 12 (didn't know I had this option) & I can delete alot of the 21 snapshots that have already been saved. I have no idea how much of the HD was set aside for the VM because someone else installed it for me 5 years ago. I've had enough problems with it over the years that I've wanted to switch to Quicken for Mac or find another financial program to use. I've upgraded the VM 2x over the years, but didn't want to spend $100 for Version 5. I understand the concept of a VM but that's about all.
I did do the disk cleanup in Windows on the C drive. I deleted 700 MB of temporary files and then compressed 4G of data down to 2G. While the cleanup was progressing it said that the C drive was 30.99G and 78% of it was free. That just doesn't make sense to me. It recommended a defrag, so I did that also.
I'm pretty sure it's real data because I recently had to switch from a 320G external HD for TM, to a 1T HD. One TM backup was over 300G which I found to be excessive because I basically use my computer for mail, some word processing, and my financial data.
Thanks again for all your help. I really appreciate it.

I need help please, upgrading from OS 10.6.8...

Please help me - I'm such a technophobe!! I need help upgrading from OS 10.6.8... I get part way through the process and get a box saying "The link needs to be opened with an application" and I don't know what to do next...

The only way to upgrade from 10.6.8 (which is high as Snow Leopard goes) is to obtain Lion or Mountain Lion from the Online Apple Store or Yosemite from the Mac App Store.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Yosemite (10.10.x) - which is free - unless you need to run specific software which will run on Mountain Lion only. Mavericks (10.9.x) is no longer available.
The requirements for Mountain Lion and Yosemite are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Yosemite is available from the Mac App Store (in Applications). Mountain Lion can be obtained the Online Apple Store.
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Need Help w/ Programming (Feeling Physically Weak...a little)

I have not been able to compile my program since there is no compile option that I can choose at this time...& that I have not been able to download the appropiate components yet, but based on my program, I need to know if the program I have will excecute perfectly. This is based on the Split.java program & I am trying to extract words from article.txt. If there is an error in my program what needs to be typed & where is it shown within the program. Also, any symbols such as <>, -, etc. should not be included when article.txt is being redirected as an output.txt. I'm completely stumped & do not know where to go from here!
P.S. - At this time, I am still feeling a little dizzy after donating blood, so I really need help in this program. Don't worry, I'll be physically fine in a couple of hours! :)
- Split.java (actual program)
import java.io.BufferedReader;
import java.io.InputStreamReader;
import java.io.IOException;
import java.util.StringTokenizer;
public class Split
public static void main(String[] args)
throws IOException
BufferedReader console = new BufferedReader(
new InputStreamReader(System.in))
boolean done = false;
while (!done)
String inputLine= console.readLine();
if (inputLine == null)
done = true;
else
// break input lines into words
StringTokenizer tokenizer =
new StringTokenizer(inputLine);
while (tokenizer.hasMoreTokens())
// print each word
String word = tokenizer.nextToken();
System.out.println(word);
- Analyzer.java (my program)
CS46A Homework #5: Part 2
@author Mark P. De Guzman
import java.io.BufferedReader;
import java.io.FileReader;
import java.io.IOException;
import java.util.StringTokenizer;
public class Analyzer
     public static void main(String[] args)
     throws IOException
          Statistician s = new Statistician();
          BufferedReader console = new BufferedReader(
               new FileReader(System.in));
          boolean done = false;
          while (!done)
               String inputLine = console.readLine(firstLine);
               if (inputLine == null)
               done = true;
               else
                    // break input lines into words
                    StringTokenizer tokenizer =
                    new StringTokenizer(inputLine);
                    while (tokenizer.hasMoreTokens())
                         // print each word
                         Char ch = word.CharAt(i)
                         if(character.isLetter(char);
                         Stat.nextWord();
- article.txt (document I need to extract the words from)
The desktop publishing <industry> is today a multi-million-dollar
business-much of it being conducted out of home offices by graphic
designers and {writers} who embraced desktop publishing early on as a
viable adjunct to their other skills. Although systems using Apple
"Macintosh" technology still dominate the high-end graphics market,
improvements in the Windows! operating environment have made
personal computers a viable component of many DTP systems as well!

public class Analyzer
public static void main(String[] args)
throws IOException
THIS LINE IS WRONG:
Statistician s = new Statistician();
OBJECT NEVER USED - GET RID OF IT.
BufferedReader console = new BufferedReader(new FileReader(System.in));
boolean done = false;
while (!done)
THIS LINE IS WRONG:
String inputLine = console.readLine(firstLine);
firstLine IS NOT DEFINED
BufferedReader.readLine() DOES NOT ACCEPT ARGUMENT
if (inputLine == null)
done = true;
else
// break input lines into words
======
REWRITE YOUR READLINE FUNCTIONALITY LIKE THIS:
String inputLine;
while ((inputLine = console.readLine()) != null) {
======
StringTokenizer tokenizer = new StringTokenizer(inputLine);
while (tokenizer.hasMoreTokens()) {
// print each word
THIS LINE IS WRONG:
Char ch = word.CharAt(i)
Char SHOULD BE char
word IS NOT DEFINED - NEED TO INCLUDE "String word = tokenizer.nextToken()"
i IS NOT DEFINED - NEED TO CREATE A LOOP
THE LINE DOES NOT END WITH ";"
THIS LINE IS WRONG:
if(character.isLetter(char);
character SHOULD BE Character
char IS NOT DEFINED
MISSING ")"
THE LINE ENDS WITH ";"
WHAT DO YOU WANT TO DO IF IT IS A LETTER?
THIS LINE IS WRONG:
Stat.nextWord();
COMPLETELY MEANINGLESS - GET RID OF IT.

Need help recording live drums on seperate tracks.

I used to be a professional recording engineer, and as such took pride in knowing my way around a console. But with GB I am stumped.
I need to record a live drummer, and subsequently place each drum on a seperate "track" as when recording analog.
Being totally new to hard disc recording, means learning all over again. Drums are set & miced, what do I need to make this happen (or is it even possible in GB)?
Watched the seminar for Logic, and sure enough there was a drum kit properly recorded on individual tracks, but they gave no detailed explination of how that was done.
Thanks for all help. I'm retired now, and looking for something to fill my time.

Basically you select the channels for each track in
the DAW. In this case GB.
At the bottom of the 'track info' window on your real
instrument (mic) tracks use the 'input' pulldown menu
to assign channels for each mic for each track you
wish to record on.
In case you are not familiar enough with GB.
If the track info window is not open. You can open it
by double clicking on the track, or under 'Track'
menu use: Show Track Info.
Or keystroke: 'Command I'.
The available channels will be available and show in
the input pulldown menu.
So basically you will want an interface with the
right I/0.
Depending on what you may have been used to in the
past for analog quality.
You may wish to take some time to research what's
available for the right amount of I/O with good pre's
and conversion. There is definitely a line of
demarcation in the quality of analog circuits and
digital converters and clock.
It may or may not matter to you, I don't know but
judging from your past and post maybe worth a
mention. However, I don't know to what standards you
wish to work in.
Standards such as Alan Parsons, Geoff Emerick, and Jeff Lynne.
Also if you want to use outboard analog while
tracking with an interface you may want to have
insert I/O available.
And of course if you are wanting to use bussing
sends, complete editing, etc. within your DAW you
will want start looking at other DAW's like Logic or
PT or DP, etc.
Thanks, I want to get started with GB, and have some basic tracks laid & get Logic in a couple of months. Got to have bussing send/recieve for fx on SN, EQing the kit, compression, etc.
If you are not familiar with other forums here are a
couple that may be of interest to you.
http://recforums.prosoundweb.com/
http://www.gearslutz.com/board/
Mac based:
http://www.bigbluelounge.com/forums/index.php
Lots of great info here, thanks.

Need Help Recording Programs from my DVR to my VCR

Similar Messages

Maybe you are looking for