Need Help----Red Alert

Hi Team,
I own a BB Curve since Feb 2012 and have been facing issues since then, I've got this handset sent to the repair center 3 times and still have the same issue coming up every other month. The phone automatically reboots and it gets really irritating as we've paid our hard earned money for the handset and if this what we get than we are forced to move to another handset providers, Now the time has come for BB as a company to act and change my handset for good for all the trouble I've had. Need a reply on this ASAP.
Disappointed ,
Chandrakant

Hello,
I can't tell for sure, but if you are expecting a formal reply from BlackBerry, please refer to this information posted at the top of every page on this site:
This site is not a channel for any formal communications with BlackBerry for any purpose whatsoever. Your escalation channel is with the entities with which you are already dealing...you need to escalate with them, and if you still require formal BlackBerry assistance, they must escalate your case via the channels they have. End users have no free channel by which to bypass their contractually required support and escalation channels.
There is something called incident support, but it costs to just ask the initial question, since you are bypassing the contract you signed upon purchase. If you wish to investigate that, you can review it here:
http://us.blackberry.com/support/programs/technical/incident.html
There also might be some good reading here:
http://us.blackberry.com/legal/handheld-limited-warranty.html
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Need help, red lines Insignia 46" TV

    Hi all,
    I am looking for some help. I am having an issue where every 20 minutes or so a red line flickers on the screen for about 1 second and goes away. It is not a full red line across the whole tv. It is longer horizontally but it is not one row of pixles. It varies in size but it is most of the time on the left side of the screen however it moves up and down for where it will appear.
    I don't believe this is a cable issue as its happening on all of my devices (2 HDMI connections 1 Component ). The Tv is also less than a month old.
    Any insight would be great
    Thanks.

    This is a very odd symptom. I would start by disconnecting HDMI inputs an see if it still happens with just the component input connected. Still happening? Make sure cables are fully seated. If issue continues, likely a TV issue (you have a 30day window to exchange). If problem goes away, it may be caused by a bad HDMI cable or one of the HDMI sources. It would be a good idea to make sure the connections are clean (blow out any dust in connector) and fully seated. A loose component cable may cause similar symptom as well, all connections should be checked for a correct & secure connection.
    -Agent M
    I do currently work for Best Buy but my opinions are my own and do not necessarily reflect Best Buy policy. If you find the info useful, please ‘like’ our Facebook page:
    www.facebook.com/geeksquadrecon
    www.twitter.com/geeksquadrecon

  • Need Help: iTunes alert message I do not understand: see pics

    I was doing a back-up of my iPad to iTunes and received these 2 alert messages that I don't understand:
    IMG_9759.JPG
    IMG_9762.JPG
    Please advise! Thank you!

    go to the tabs for each of Movies, TV shows, Books and Tones (in the picture you posted you have the Books tab selected) and check your sync settings.  You get this message if you have turned off synching for those areas. 
    It is a little confusing, if you do not synch books, then it takes away all the books it put on in previous syncs.
    If you sync books it will leave on any books that are already there, unless you have removed them from your iTunes library on your computer.
    So you are getting the warning because you asked it to sync but had deselected these categories.
    You probably thought that you didn't have any new books to sync over, so it didn't need to do that part of the sync.  But it doesn't work that way.  The sync process looks for what is new, and only transfers the new stuff.  But if you say do not synch books (or movies, etc.) then it assumes you wish to remove all previously synched books (or movies, etc.)

  • Need help on alert message

    I am using a Flash .swf file as part of a web-based piece
    built in Toolbook. I publish the piece and then click on the
    index.html page. When the .swf plays locally, I receive this
    message:
    The following local application on your computer or network:
    C:\(and path to file)
    is trying to communicate with this Internet-enabled location:
    C:\(and path to file)
    To let this application communicate with the Internet, click
    Settings. You must restart the application after changing your
    settings.
    The there is an OK and Settings...buttons.
    First off, when I click the Settings... button, nothing
    happens...but the real question is how to avoid this message from
    appearing at all. I ask this because I want to have a downloadable
    version in HTML form and do not want the user to see this message.
    Is it possible to get rid of this message and if so, how?
    Thanks
    KS

    Local settings are controlled by the settings manager:
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l
    When you publish this file the messages will go away, so your
    users will not see it.

  • Need help, RED 2K workflow

    Been working on the CS5 trial, testing red 2K and 4K and some d7 and PII footage... running sweet..
    According to these I'll stablish my post workflow PC based.. but...my delivery format apple PRORES... I'm working on the trial CS5 that's I'm not sure comes with all the presets and codecs... Can I deliver PRORES using CS5 PC workflow?
    Thank you
    Marchello

    PRORES can be handled within PPro CS4 with the latest version of Quicktime installed on Windows. On Apple it should work natively. So i think it should on CS5 Win and Apple.

  • Help with Alert.show()

    I need help with Alert.show(). My goal is to display a message box when a button is pressed.
    My program header:
    <?xml version="1.0" encoding="utf-8"?>
    <s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    actionBarVisible="true" fontWeight="normal" overlayControls="false"
    tabBarVisible="true" textAlign="right" title="tipCalc">
    //// start of script section:
    <fx:Script>
            <![CDATA[
            import mx.controls.Alert;
            import mx.events.CloseEvent;
    // show a message box when button pressed
    protected function about_clickHandler(event:MouseEvent):void
                Alert.show( "This is a message!", "Dialog Title" );    }
    This results in the errors below:
    Access of undefined property Alert.
    Definition mx.controls:Alert could not be found.  

    Well, me and my three days of Flash Builder are lost in the woods. I have no idea how to do what you suggest. The code Google's showing me seems to call for scrapping my working functional program and starting from scratch. For a message box.
    Can I add a message box to my existing code?
    Here's the header...
    <?xml version="1.0" encoding="utf-8"?>
    <s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    actionBarVisible="true" fontWeight="normal" overlayControls="false"
    tabBarVisible="true" textAlign="right" title="tipCalc">
    And here's theclickHandler that should call the popup.
        protected function about_clickHandler(event:MouseEvent):void
                    //  Call a message box.

  • Firefox will not update plugins labeled in red as "potentially vulnerable plugins". Need help.

    Firefox will not update three plugins appearing below the
    statement in red : " vulnerable plugins". I tried three times, and
    all I got was other pages with lots of ads. I need help. Thanks.

    Some plugins may need to be removed using the Control Panel, or Windows Explorer, because they are managed by other software or dropped in nonstandard folders. Can you list the three plugins so people can give specific advice on them?
    For the RealPlayer Browser Record Plugin you might need to update RealPlayer or use its options dialog to turn off the recording/downloading feature in order to remove this one.

  • Red light on new HH3- New custome,r need help trye...

    Hi new bt broadband customer need help getting connect for the very first time. Iv got  RED broadband light on all the time and have tryed everything to get it working. Any ideas why its not connecting  please. Activation dat was 17th February 2011 .
    Many thanks

    suggest you mail the board mods they are good at solving your sort of problem forum.moderation.team@bt .com including a link to this post and your bt phone number and bt account number they normally get back to you within 72hours as all emails are dealt with in turn
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • When i get an SMS txt my led light doesnt turn red no more need help!

    when i get an SMS txt my led light doesnt turn red no more need help!

    1. Product name:
    BT Home Hub
    2. Serial number:
    +068343+NQ34940784
    3. Firmware version:
    Software version 4.7.5.1.83.8.204 (Type A) Last updated 22/01/15
    4. Board version:
    BT Hub 5A
    5. DSL uptime:
    0 days, 00:58:41
    6. Data rate:
    9995 / 39993
    7. Maximum data rate:
    11929 / 48683
    8. Noise margin:
    6.6 / 9.5
    9. Line attenuation:
    25.6 / 20.4
    10. Signal attenuation:
    25.4 / 20.0
    11. Data sent/received:
    8.6 MB / 61.5 MB
    12. Broadband username:
    [email protected]
    13. BT Wi-fi:
    Yes

  • Need help installing my graphics driver in windows vista via boot camp

    New to mac so first time on forum as well.
    Love the Mac but i also want to get on some old games. C&C The First Decade mainly.
    I am currently using below.
    Mac mini Mid 2011 processor 2.5 GHz Intel Core it
    Memory 4 GB 1333 Mhz DDR3
    Graphics AMD Radeon HD 6630M 256 MB
    Software Mac OS X Lion 10.7.5
    Installing windows vista home premium 32 bit
    I have installed windows vista home premium using boot camp assistant and downloaded the windows drivers as well. After i have installed windows i installed boot camp using my Mac OS X snow leopard which installed boot camp 3 or 3.1 i believe and i eventually got apple updates for 3.2 which is what i am now runnning on vista. I had trouble getting my sound to play through my speakers at first but eventually got them working and now it is my graphics driver that i cannot seem to get working. In vista(I also downloaded service pack 1 and 2) when i go to control panel and check out my device control it shows a yellow exclamation point next to the adapter. I guess i need help in getting my graphics installed correctly on my windows. Is there something i should take off to install the correct driver? Or do i just need the correct driver download? If i have the correct driver how do i upload it onto my windows side in the device control.
    When i try to run c&c generals/zero hour i get a directx 8.1 error, red alert 2 is black but i can hear. i know these games can work i installed the graphics correctly the first time when i did not have sound as this is my second time installing windows so the game did load when i did not have sound.
    Advise?
    I was thinking about saying forget this i can't waste hours of my time anymore but i have to be close to getting everything working if i had graphics before and no sound but sound this time and no graphics. I was also thinking about just buying windows 7 home premium sp1 64bit system builder dvd off amazon and reinstalling windows using windows 7 but i want to make sure i can play these games before i spend the money. I thought my mini couldn't support windows vista and if it did only boot camp 4? how am i getting this far to get things to work?
    What is the driver i need to install to get these games working? What do I need to do or what am I missing???
    Do i need to install a different boot camp off apple and find a driver that will get mine to work in vista?
    Any and all responses will be greatly appreciated i have been at this everyday for hours.

    Also is there something, say maybe a driver, that was installed i do not need that is blocking me from installing the correct drivers? What driver in my boot camp folder do i need to install to get to the correct display to run those games.

  • Unable to broadcast workbooks. need help

    Dear all,
    We are unable to broadcast workbooks in broadcaster.
    When we are trying execute in broadcaster settings. we are getting following message.
    "settings <Workbook Name> were started from the  BEx Broadcaster. it is green
    processing of user <userid>. language EN, it is green
    Processing setting < Workbook Name>. it is green
    An Active RFC server could not be found. finally ended up with red alert"
    so we could not broadcast workbooks.
    please suggest some possible solutions. it is in production server. so it is quite critical error and need solution ASAP.
    please help.
    Regards,
    mohankumar.G

    Hi Mohan,
    Goto SCOT/SCON t-code, click create button,
    Then give the node name and desc>select the connection as RFC connection>select any RFC Destination (any server)>then select Internet>then give the Internet mail address>then select formats which you want>don't select the restrict time>then select 'N' for further mail types>give max wait time in hrs and mins>select nod ready for use>select the test connection--> test the connection and click on Finish button
    Then it completes the SMTP connection.
    Regards,
    Ravi Kanth

  • Need help about 1015

    need help about 1015 it says connect iphone to itunes on screen i did it but it doesnt work and says unexpected 1015

    Try restoring it: Make sure you are following the instructions in this procedure to the letter.  Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
    Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again.
    If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    If you have backed up the iPhone in the past, select the device in iTunes and choose "restore from backup".

  • AVG Not Recognized on Network Magic --Red Alert

    How do I correct the red alert on Network Magic which says I have no antivirus installed when I just put on the new version of AVG?  Now I have got Avast on the desktop and installed a new version with no red alert about it.  Is AVG not a good antivirus?  (Yes, I decided to try it on the laptop while keeping Avast on the desktop.  Just wanted to see if there was any difference.)  Will I need to uninstall AVG and put Avast on the laptop to keep this alert from being there?  Thanks for any help!  Susan

    Network Magic is still being sold but Cisco is providing no support for it.  I am still finding new uses for it in mapping and checking out my fairly complex home network.  If it was updated and given some bug fixes it would be nice, and make me feel a lot better about Cisco.  But because they've abandoned it and also the WRT610N router, I have finally stopped buying new Cisco products.  While my 610N has buggy (IMHO) firmware, and always runs very hot due to poor ventilation, and has poor range since it no longer has external antennas like earlier models.  I'd love the performance of the latest models but I won't take the chance.
    (Mod note: Edited for forums compliance.)

  • I need help with my phone getting it out of recovery mode

    i need help getting my iphone out of recovery mode

    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Need help to develop Pythagoras theorem-

    Hi i need help to develop proofs 2,3,4
    of pythagoras theorems in java as demonstrations
    These are applets can anyone help me with it or give me an idea of how to go about developing it -
    the site is the following
    http://www.uni-koeln.de/ew-fak/Mathe/Projekte/VisuPro/pythagoras/pythagoras.html
    then double click on the screen to make it start

    Pardon my ASCII art, but I've always liked the following, simple, geometric proof:
         a                   b
    ---------------------------------------+
    |       |                                |
    a|   I   |              II                |
    |       |                                |
    ---------------------------------------+
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    b|  IV   |              III               |
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    ---------------------------------------+It almost goes without saying that I+II+III+IV == (a+b)^2, and II == IV == a*b,
    I == a*a and III == b*b, showing that (a+b)^2 == a^2+a*b+a*b+b^2.
    I hope the following sketch makes sense, stand back, ASCII art alert again:     a                   b
    ---------------------------------------+
    |               .             VI         |
    |     .                 .                |a
    | V                               .      |
    |                                        +
    |                                        |
    |   .                                    |
    b|                                     .  |
    |                                        |
    |                  IX                    |
    | .                                      |
    |                                    .   |b
    |                                        |
    +                                        |
    |      .                                 |
    a|               .                  . VII |
    |  VIII                   .              |
    ---------------------------------------+
                     a                    bThe total area equals (a+b)^2 again and equals the sum of the smaller areas:
    (a+b)^2 == V+VI+VII+VIII+IX. Let area IX be c^2 for whatever c may be.
    V+VII == VI+VIII == a*b, so a^2+b^2+2*ab= c^2+2*a*b; IOW a^2+b^2 == c^2
    Given this fundamental result, the others can easily be derived from this one,
    or did I answer a question you didn't ask?
    kind regards,
    Jos

Maybe you are looking for