Need Help regarding Dual Layer DVD Writer

Hi All,
I want to burn a Dual Layer DVD on my Macbook but I am not sure if it the DVD Writer which I have in macbook will support or not. Below are the details of the drive
HL-DT-ST DVDRW GSA-S10N:
Firmware Revision: BP10
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds
Plz, if anyone can help me with this, I will really appreciate, Thanks in advance.

Your computer will burn dual layer DVDs.
(37544)

Similar Messages

  • Internal Dual-Layer DVD Writer for Tecra M1

    Hi,
    Does anyone know of a suitable internal dual-layer DVD writer for the Tecra M1?
    Thanks,
    Colin

    Hi,
    check this site and you will find some proper information about Tecra S1 and DVD Writer!
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/selected_product_option.jsp?service=EU&PRODUCT_ID= 102102&DISC_MODEL=0&toshibaShop=reseller
    Bye

  • Dual Layer DVD write error #80020022 - failure to communicate with disk

    This only happens on Dual Layer DVDs, and always just as it's finishing. "Communcation with the disk drive failed error code: 80020022"
    Used Disk Util and direct burn via finder - both give same error. The image is a .cdr created via DiskUtil, original from a factory cut dual layer DVD, about 7.2GB. The target blank is a "Double Layer DVD+R" Memorex.
    The resultant disk is full, but unusable. Re-insertion sees it as a blank disk with no usable space. It wrote something, but certainly not the TOC?
    MacBook Pro 2.5, about 6 months old, lastest Leopard
    Please - any ideas? Do I have a hardware issue?

    Wow - thanks for the quick reply, pullman! I did all of the ideas you listed, no luck. The only way to make this fail is to write to a double sided DVD, I've gone through a stack already just testing/failing. This also fails when writing to a double sided DVD through the finder (then clicking on "burn")
    Here's a copy of the console error logs:
    http://baxnet.com/bs/picture6.png
    -- which indicate a hardware/polling error on the DVD drive itself.
    Note that it is complaining about /dev/disk1, which on my system maps to the DVD drive:
    Model: MATSHITADVD-R UJ-867
    Revision: HA13
    Serial Number: HG010865
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Low Power Polling: Yes
    Thanks again for your help - but still no luck. According to the logs, this may well be a device/hardware problem. Would you suggest a call to Apple support?

  • Please recommend a dual layer dvd writer drive...

    For my Dual 2.0 GHz G5.
    Looking for something reliable, fast, cheap and will write dual-layer dvds as well as all the other usual stuff.
    Thank you

    Hi Red Havoc.
    I've got the same machine and I fitted a Pioneer DVR - 115D and it runs fine. You have to play a bit with the height of the screws to get it to fit snugly. I couldn't use the black knurled screws on the original drive cos it rides too high with them and the tray gets caught on the edge of the aperture. I think I just used some long hard drive screws in the end. It' quite straightforward.
    There's a bloke on eBay who is doing them for about 25 quid at the mo.
    I think any Pioneer optical drive will fit plug and play as they supply all the Apple originals anyway.
    Good luck,
    L2K8

  • Dual layer dvd burning

    Hi,
    I need some help regarding dual layer dvd burning.
    I never burned a dual layer dvd before and am going to in the next few days for a big movie screening. So I better get this right.
    How do I set the layer break? do I just set it to be automatic or should I set a chapter in the track? if yes, then where do I suppose to put the chapter.
    Is there any advise regarding dual layer burning ? so that I have less possibilities of messing things up.
    Its a 115 mins movie. Im planning to encode it with 6.5 avg 8 max.
    Is it safe to put a lot of chapters in?
    I won't have dvd menu. I will just set it to play straight away.
    thanks.
    Jack

    I'm not an expert in the least but I have worked with duel layers and let me tell you than can be a real s.o.b. I'm not sure what the scoop is on them but they tend to glitch out while your burning. I made three and 1 worked perfect the other two not at all and for some reason the 1 that did work only played on about half of the DVD players they were played on. When I got it into a DVD player that worked the chapter markers were not a problem. I had four seperate segments that were linked up and played fine. We used this for a screening in front of about 400 people.
    Our feature was about the same length as yours so after the screening we decided to just take the quality down a little (which you can't even tell) and put it on a normal DVD R. We saved a ton in duplication.
    Setting the Duel Layer is pretty easy, it's all in the inspector under the disc/volume tab but make sure that in your outline window the main DVD at the top is highlighted. I don't think it matters if you have a chapter in the middle of the footage or anything like that. You can just link up one long stream if needed. Be sure to try out the DVD on the actual player you are going to use. Good luck.

  • Blu Ray drive/burner can't write dual layer DVD - W500 Vista 64

    I recently did a clean Vista 64 Business install on a new hard drive. I pretty much have everything up and going, except the Blu Ray drive doesn't recognize that it can write dual layer DVDs. I ran Nero InfoTool and it, too, tells me that the drive cannot write dual layer DVDs. (Pretty much everything in InfoTool is checked, read and write, except all the HD-DVDs and the dual layer DVD write functions.) Does anyone have any ideas? My understanding is that the drive can write dual layer DVDs.

    I'll answer this with the same information that I posted at TPF:
    From: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70234
    Reads or writes data with speedy maximum data transfer rates of:
    * 16x maximum (writing to CD-R media)
    * 10x maximum (writing to CD-RW media)
    * 5x maximum (writing to DVD-RAM media)
    * 8x maximum (writing to DVD+/-R media)
    * 4x maximum (writing to DVD+/-RW media)
    * 2x maximum (writing to BD-R/RE SL media)
    * 1x maximum (writing to BD-R/RE DL media)
    * 24x maximum (reading CD-ROM, CD-R media)
    * 24x maximum (reading CD-RW media)
    * 8x maximum (reading DVD-ROM/-R/+R SL media)
    * 6x maximum (reading DVD-ROM/-R/+R DL media)
    * 6x maximum (reading DVD-RW/+RW media)
    * 5x maximum (reading DVD-RAM media)
    * 2x maximum (reading BD-ROM media)
    * 2x maximum (reading BD-R/RE SL/DL media)
    It appears that DL (dual layer) writing in DVD-R and DVD+R formats is not supported.

  • Dual layer DVD burner any time soon?

    I have an old PowerBook 1.33ghz. I'm itching to replace it with a MacBookPro. I upgraded this PowerBook with a dual layer DVD burner, and I use it a lot. I moved to the US from the UK and send many DVD's back to family and friends in the UK. I can't live without the dual layer DVD writer, plus backing up requires less DVD's and hence less space on my shelves.
    Anyone here know when Apple will release a model with a dual layer DVD writer? I refuse to buy an external.
    This old G4 has better DVD support than Apples flagship portable computer, doesn't seem right does it. I keep thinking I can live without dual layer, but its just such a step back.
    Anyone know of when this may change and MacBookPro will get a dual layer burner? I dont know how long I can wait to get my hands on the new MacBookPro . . .

    As soon as the industry can make one (so thin). I'll be buying one to replace it on my MBP. Might be Blu-ray

  • Dual Layer DVD's not burning with Disk Utility

    I successfully created two dual layer DVD's with a disk image that I created in iDVD. Checked both of those disks in a DVD player and both work fine. Now trying to burn more copies with the same procedure, same disk image file, same media manufacturer and all are failing. Any ideas? I can still successfully burn short videos on regular DVD's from iDVD so my burner has not completely failed. I had created a disk image out of the material that I need on the dual layer DVD because it's about 2 hours of video and iDVD was ejecting the disk too early without burning.

    Sounds like the burner may have failed. It can fail in a way that only larger items cannot burn. Take it to your nearest Apple Store or Apple Authorized Service Provider to have them check it out

  • Does G5 1.8 GHz write to dual layer DVDs?

    I have large picture library that's more than a normal DVD can hold, but will fit on a dual layer DVD. When I put the DL disk in, my Mac just spits it out. It won't even recognize it. G5, machine model PowerMac9,1, PowerPC g5 (3.0). Pioneer DVD-RW DVR-117D - all from System Profiler.
    Thanks, Josh

    The Pioneer DVR-117D is in reality a DVR-108 that Apple has modified (read: crippled) the firmware on. One of the features that was removed was the ability to burn DVD+R DL discs (it will not write to DVD-R DL discs).
    If you want to bring back the DL write capability, you'll need to force flash the drive with the firmware for a DVR-108. See this post here on Discussions with instructions on how to do the flash. Make sure that you use the links from my post in that thread to the flashing program and to the firmware files. The original article that's linked to in that thread references outdated files.

  • Help with burning large project on dual layer DVD

    Hi need help please.
    I am busy with a SD 16x9 project 215 minutes long so I am trying to use dual layer DVD's. The project has a serious menu setup (well I think so), it starts with a intro and go's into the main menu with sub menu's and so on. my problems is the following:
    if I burn a image all works well if I burn a disc from the image or using encore the menu once using a DVD player is very slow (the last half of the links on the time line) and some links get mixed up (if I press play dvd on the 3rd sub menu it somtimes starts in the correct place and somtimes it starts one link later).
    is this caused by the break in the layer and what can I do to correct it or to get it better.
    thanks
    Darren

    Are you using any motion menus? Have you exceeded the 1 gig limit for menus etc?
    I assumed 16:9 and forgot to look before I started posting: it does not look like it, but be sure you don't have more than 18 buttons per menu (if it is 16:9).
    With lots of short clips, break position should not be an issue. You can export to a folder and use imgburn which gives more control over layer breaks.
    Even though complex, it all looks straight forward, and, even though I can't see the image detail, it looks okay. The most likely issue in such a project is that Encore got lost as you made changes/corrections. Sometimes they can be fixed. Other times, the solution is a do over. Newer versions for Encore appear more robust (fewer problems and more likely to fix problems), but no versions appear to be free of such issues.

  • Cannot Write Dual Layer DVDs on Pavilion G6 laptop

    Hi,
    I have a Pavilion G6 2213sa laptop with a DVD-RAM UJ8B1 DL DVD RW, I can burn single layer DVDs no problems and CDs however when I try to burn a Dual Layer DVD in either UDF or ISO using Nero or ImgBurn it just fails each time when attempting to burn layer 2.
    I have tried to update the drivers but can't find any later ones than the Microsoft one that was from 2006 which I find old. I'm not sure what else I can do, can anyone else help with this? I've only had the laptop for 1 month. I can't see it being a fault with the drive it if it burns CDs and DVDs alright.

    Hi wilko7719, I have found a document that I think may be able to help you. Please click on the link that I have provided.     http://goo.gl/UV9ttp
    If this does not resolve your issue, please write back and I'll be happy to do more research for you.
    Thanks in advance
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Media write error for dual layer DVD burn

    I am having a problem burning a dmg to a dual layer DVD using the internal DVD writer. I have tried both Disk Utility and SimplyBurns.
    Both program s go through the preparation for the file, and when it attempts to burn the disk I get a 'media write error'. I am using Memorex DVD +R DL disks. I have successfully burned both CDs and regular DVDs with the drive.
    Does anyone have a suggestion on how I can fix this?
    Thanks

    I am using Memorex DVD +R DL disks.
    Try Verbatim DVD+R DL discs.

  • Helpful info on burning to dual layer DVD's

    I had posted a couple of questions two weeks ago re: burning an idvd project to a dual layer DVD. Was successful in the end. Further to this, Larry Jordon's December newsletter (www.larryjordon.biz) includes a very informative article on burning dual layer DVD's. I recommend it highly. Each of his monthly newsletters have a lot of helpful tips on fcp etc. (and no, my last name isn't Jordon!!)

    Just for future reference, the correct address is: http://www.larryjordan.biz/. There was one letter off in the original posting.

  • Cannot write dual layer DVDs

    Hi,
    I am trying to burn dual layer DVDs with no success. Already tried Toast or Burn disc from Apple. Tried other DVD brands too. No luck.
    The message I get is:
    Sense Key: HARDWARE ERROR
    Sense Code = 0x44, 0xD9
    INTERNAL TARGET FAILURE
    What should I do?
    My drive specs:
    PIONEER DVD-RW DVR-K04L:
    Firmware Revision: D441
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    THANKS!

    Hi. No, not yet. Are those supposed to work? I tried KODAK and one that is chinese and sold locally as "maxprint". The strangest thing happened now: I bought 5 of those KODAK and only one of them started the process of burning. But it reported an error after burning 55% and crashed. So, chances are the problem is really with the discs? Not the burner?
    Thanks!
    Message was edited by: Marcio Tucunduva

  • Incompatibility issues with Dual Layer DVD+R  help?

    I think I've made a serious mistake in believing I could author a Dual layer dvd for replication and sale on my own. I've spent over 14 months on this film, which is working perfectly in Encore, complete with extensive menus and transitional movies.
    I've done my best to transcode the media in the most compatible way (keeping bitrate below 7mbps and using dolby digital audio format) BUT I'm still having bad luck with MOST dvd players.
    The DVD plays properly on my cheap sony player, but both my toshiba and humax/tivo players failed to read the disc. (multiple tries/burns....or coasters, now) I've read that there are common problems with dual layer +R.
    MY QUESTION IS: what is the BEST POSSIBLE WAY to author/burn this project for mass replication? Can I really achieve the result I'm looking for with Encore or will I have to give up and go to a professional authoring house with DLT capability?
    Will I get the best result by burning from encore straight to disc OR burning an image or folder, then using a third party burning program?
    Thanks SO MUCH for any responses. This process has been soul-crushing.

    >The DVD plays properly on my cheap sony player, but both my toshiba and humax/tivo players failed to read the disc. (multiple tries/burns....or coasters, now) I've read that there are common problems with dual layer +R.
    Marc, the only mistake I think you are making is in assuming that set top players can handle a written DVD+R DL disc.
    Support in older players is at best sketchy.
    If the disc is working properly in at least one player, then you should be good to go.
    Replication will produce a different type of disc. One that
    i will
    play properly.
    Not all burners support book typing, and unless you know what you're doing here do not use these "fudges". It's best using Plextor, and even Benq burners. The freeware utility IMGBurn has this ability, and it also tells you what burners do this. I've never needed it personally, as my Pioneer burners & Denon players have no trouble with +R DL media.
    What you really need is a player that you
    i know
    plays DVD+R DL discs properly. Once you know your player is good with the format, then all other inconsistencies are player related, not authoring, and not your problem. There is simply no way at all you can guarantee any form of compliance with +R DL media, as there is nothing in the specs that says any set top player has to read these discs. Or -R DL where support is generally even worse.
    Whilst most players will read -R single layer & +R single layer, again there is no mandatory requirement to do so.
    You will need to get these
    i replicated
    and not duplicated. Duplication (burning) will result in a lot of returns, and a lot of wasted money.

Maybe you are looking for