Need help regarding graphics problem,!!!
Hi,
I’m a Customer of your prestigious Organization, recently I bought a HP Laptop MODEL-15 D-103TX , everything is fine with my Laptop and Feeling proud to use this HP product , But I’m facing strange problem that my Laptop Graphics are running smooth when I connect to my AC power Charger , but as soon as I Disconnect the Power Cord , I lose the Graphics performance as I was getting it when I was connected to Power, and it makes me feel Very annoyed that HP product can give such a silly but headache problem,
I had even downloaded the HP drivers from the Official HP Website and Installed them Correctly as per the STEPS given in your Website, and even tried by Configuring the POWER PLAN to MAXIMUM performance, and even Calibrated the Battery according to the HP SUPPORT ASSISTANCE and it shows that Battery status is OK, but too I’m facing the same problem,
I hope you respond to my mail ID as soon as possible, and help me to solve this problem and maintain the SERVICE STATUS and PRIDE of HEWLET-PACKARD, Please Don’t make me upset, and don’t make me to take any further sever Actions.
Thank You
Hi @Tajuddin_Hongal ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that while connected to AC power your performance is good, but once you disconnect and run on battery the performance drops.
You have updated the driver and checked the power plan.
Your system has switchable graphics. HP 15-d103tx Product Specifications. Your processor has an integrated Intel 4600 and you have NVIDIA GeForce 820M (2 GB DDR3 dedicated).
When you are connected to AC it uses the high end to deliver the best performance, when you switch to battery, to save power, it switches to the lower end. You should be able to configure the graphics in the Catalyst Control Center to change this behaviour. Here is a link to assist you with that endeavor.
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
If you are still having an issue, I suggest contacting HP support for further assistance.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap .
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Similar Messages
-
Need HELP regarding installinfg CR2008/Visual Advantage
I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctlyHi Shamish
Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
Best regards
Michael -
I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.
I am using Labview 8 ... I need to develop a software to accquire the ECG data (simulated enironment ) and compute the time domain parameters of Heart rate variability like "SDNN, SDANN...etc". Can some 1 plllzzzz help me out.Plzz help me if u can.Thanx in advance.Hi Andy,
Thanx for responding. The input is from a text file. SDNN, SDANN,etc are the timedomain parameters of heart rate variability.
SDNN: the standard deviation of the NN or RR interval i.e. the square root of variance.
SDANN:the standard deviation of the averageNN interval calculated over short periods, usually 5 min,which is an estimate of the changes in heart rate due tocycles longer than 5 min
SDNN index, the meanof the 5-min standard deviation of the NN intervalcalculated over 24 h,
RMSSD: the square root ofthe mean squared differences of successive NN intervals
NN50: the number of interval differences of successiveNN intervals greater than 50 ms, and
pNN50 the proportionderived by dividing NN50 by the total numberof NN intervals.
The problem is dat I am a fresher to the world of Labview. I have jus recently started working on it. Can u please suggest me some some idea as soon as possible.
As i said I have the ECG data in the form of text files..I need to create sort of GUI to calculate the time domain parmeters....I need help urgently. Plzzz help me if u can. If u have and .vi example to calculate the RR interval plzz send it to me ASAP.
Thanku -
em user of iphone 3gs os 6.1.6
Yesterday i restore ma iphone
after that em Unable to install ibook in ma iphone its say me that u need os 7 ...
need help regarding this issue.... what i do is there any alternative app ...?Hey Seungly,
I've realized that my computer runs fine UNLESS I turn the AirPort on to connect to the Internet. The moment I click "Turn AirPort On," the "You need to restart your computer" screen immediately pops up. Is there any connection between AirPort and my problem?
That could very easily be the case, a bad Airport card. Look at this recent post:
http://discussions.apple.com/thread.jspa?messageID=7960754�
John diagnosed it from the panic log.
Does yours say something similar?
Richard -
Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
TiaanGreetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario -
Need Help Regarding Enabling The Matrix
Hi All,
We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
Regards,
JayanthHey first bind the columns of matrix to any user datasource
and then you can enter any thing into your matrix
following code may help
suppose you have one column
oForm = SBO_Application.Forms.Item("URFRM")
oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
oMatrix=oForm.Item("URMATRX")
oMatrix = oItem.Specific
oColumns = oMatrix.Columns
oColumn = oColumns.Item("URCOLName")
oColumn.DataBind.SetBound(True, "", "URDSName")
oMatrix.Addrow()
hope this will help
additionally you can look at this sample
.....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources -
Is any one tell me that JAVA BEAN only used in WEB or also you in Desktop applications???? and aslo tell how i implement Java class and use JAVA BEAN. I need help regarding above matter
thanks in advance
Rehan MIrzaHere is a good link that indicate that JavaBean is not only for applets
http://java.sun.com/docs/books/tutorial/javabeans/whatis/beanDefinition.html
quote:
The JavaBeans API makes it possible to write component software in the Java programming language. Components are self-contained, reusable software units that can be visually composed into composite components, applets, applications, and servlets using visual application builder tools. JavaBean components are known as Beans.
Francois -
I need help regarding setting my mail accounts on macbook pro
I need help regarding resetting my mail accounts on macbook pro
What kind of accounts do you need to reset? IMAP or POP accounts using one of the many web-based messaging systems? An Exchange server account? Were they working and now just not working any longer?
You're going to have to be a little more specific in what you need...
Clinton -
I need help regarding installation of Netweaver 2004s
Hi,
I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
" SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport : 21212
guistart : true
command : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
guiengine: login in process...............................
guiengine: login timeout; the client was unable to establish a valid connection
Exit status of child: 1"
Regards,
Farooq Shaik.Hi
Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver. -
Hi,
I need to generate a clock with a period of 20 micro seconds, duty cycle of
approx 20% and a data line as well as an address line all linked to the clock
pulse.
I have tried many different solutions, all using the Daq PCI-1200 but nothing
seems to work correctly. Usually the system bombs and I have to do a manual
reset to over come the problem.
Any suggestions?
KenHallo, Ken,
Du meintest am 20.02.00 zum Thema Need help with daq problem:
> I need to generate a clock with a period of 20 micro seconds, duty
> cycle of approx 20% and a data line as well as an address line all
> linked to the clock pulse.
You'll need an external clock, expecially under Windows.
Windows ticks with appr. 18 Hz, and the CPU tick isn't always available
when Windows tasks multi.
Viele Gruesse!
Helmut -
Need Help regarding text Output
Dear gurus.
I need help regarding formatting of a text.
I want to format a employee sub group text.
im getting a text workers (7) from a table t503t having field ptext.
i want to show only (7) in the output not the whole text how can i do this ?
Please help
regards
Saad.NisarDATA: BEGIN OF itab_odoe OCCURS 0,
department_text LIKE t527x-orgtx,"Holds the short text for department
department_no LIKE pernr-orgeh,
pernr LIKE pernr-pernr,
ename LIKE pernr-ename,
grade like t503t-ptext, "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
* department_text LIKE t527x-orgtx,"Holds the short text for department
current_year LIKE sy-datum,
wt0001 LIKE q0008-betrg,"Basic Pay
wt1101 LIKE q0008-betrg," COLA
wt3002 LIKE p0015-betrg,"Overtime
per_basic type p DECIMALS 2,"Overtime percentage on basic
per_basic_sum type p decimals 2,"Overtime Sum Division
overtime_sum LIKE p0015-betrg,"holds sum of overtime
basic_sum like q0008-betrg,"holds sum of basic
END OF itab_odoe.
Im using the select statement to get the employee subgroup from the table
select single ptext
from t503t
into itab_odoe-grade
where persk eq pernr-persk
AND SPRSL eq 'EN'.
now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
i want to show only the text in Brackets. -
When trying to install Pro Tools 10.3.3 Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.
Thanks Linc for responding to my post. I searched a little further and found I was missing a file. Once I downloaded the fix, I was able to install the software from the original download.
-
Need help regarding image scanning from scanner and resizing it...
Hi,
I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!
Thanks,
Avinash.
Edited by: Kalakonda on Jul 24, 2009 8:08 AMKalakonda wrote:
I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!So what you are doing is you have a Scanner (hardware: like an HP flatbed scanner) attached to a server that you want to use as a scanning station? Is this the senario that you are talking about? -
need help regarding may ipad, i cant access my ipad, need help regarding may ipad, i cant access my ipad
Can you be little more specific?
-
Need help with getResource() problem under weblogic 6.1
Hey all,
I've got a serious problem that I can't figure out. This should be really
simple - but it's alluding me. I have an ear file with a number of servlets
inside it. This ear file also contains a resource that my servlets want to
read from. This resource is located (within the ear file) at:
"/content/structure/a.txt". The file contains raw ascii.
To have my serlvet read from this file, I thought it would be as simple as:
URL content =
servlet.getServletContext().getResource("/content/structure/a.txt");
// pw is an instance of PrintWriter
pw.print(content.getContent());
However, when I execute the above I get the following exception:
java.lang.NullPointerException
at
java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
at java.net.URLConnection.getContentHandler(URLConnection.java:979)
at java.net.URLConnection.getContent(URLConnection.java:581)
OK, so fine - I figure that I'm new to this. The documentation for the URL
class tells me there is another way around this. It says that rather then
calling getContent() directly, I can open a stream on the URL and read from
that, like so:
URL content =
servlet.getServletContext().getResource("/content/structure/scenario2resourc
es.txt");
FileInputStream fis = content.openStream();
but when I do this I get the following different exception:
java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
at Utility.writeFileToOutput(Utility.java:134)^M
Apparently this thing is trying to return a web-logic-specific stream (which
is incompatible with an FileInputStream) - which I don't want to use or
learn about since I want my stuff to work under other webservers.
Can anyone tell me what I'm doing wrong? This should be simple.
-john
John Hilgedick
WisdomTools, Inc.
[email protected]
Wenjin,
I appreciate your response. I tried treating it as a normal InputStream -
but it didn't make any difference. Here's what I did:
URL content =
servlet.getServletContext().getResource("/content/structure/scenario2resourc
es.txt");
InputStream is = (InputStream)content.getContent();
And here's the exception:
java.lang.NullPointerException^M
at
java.net.URLConnection.stripOffParameters(URLConnection.java:1011)^M
at
java.net.URLConnection.getContentHandler(URLConnection.java:979)^M
at java.net.URLConnection.getContent(URLConnection.java:554)^M
at java.net.URL.getContent(URL.java:807)^M
at Utility.writeFileToOutput(Utility.java:134)^M
You can see that it is definitely breaking somewhere in getContent().
If you have any other ideas, I'd appreciate hearing about them.
-john
----- Original Message -----
From: "Wenjin Zhang" <[email protected]>
Newsgroups: weblogic.developer.interest.servlet
Sent: Wednesday, November 20, 2002 5:03 PM
Subject: Re: Need help with getResource() problem under weblogic 6.1
>
> The "/" in getServletContext().getResource("/content/structure/a.txt")
means the
> web (WAR) application root, not your EAR root.
>
> The ClassCastException is because that content.openStream() is not
FileInputStream
> and has nothing to do with Weblogic. You should treat it as normal
InputStream.
>
>
> "John Hilgedick" <[email protected]> wrote:
> >Hey all,
> >
> >I've got a serious problem that I can't figure out. This should be
really
> >simple - but it's alluding me. I have an ear file with a number of
servlets
> >inside it. This ear file also contains a resource that my servlets want
> >to
> >read from. This resource is located (within the ear file) at:
> >"/content/structure/a.txt". The file contains raw ascii.
> >
> >To have my serlvet read from this file, I thought it would be as simple
> >as:
> >
> >URL content =
> >servlet.getServletContext().getResource("/content/structure/a.txt");
> >// pw is an instance of PrintWriter
> >pw.print(content.getContent());
> >
> >However, when I execute the above I get the following exception:
> >
> >java.lang.NullPointerException
> > at
> >java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
> > at
java.net.URLConnection.getContentHandler(URLConnection.java:979)
> > at java.net.URLConnection.getContent(URLConnection.java:581)
> >
> >OK, so fine - I figure that I'm new to this. The documentation for the
> >URL
> >class tells me there is another way around this. It says that rather
> >then
> >calling getContent() directly, I can open a stream on the URL and read
> >from
> >that, like so:
> >
> >URL content =
>
>servlet.getServletContext().getResource("/content/structure/scenario2resour
c
> >es.txt");
> >FileInputStream fis = content.openStream();
> >
> >but when I do this I get the following different exception:
> >
> >java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
> > at Utility.writeFileToOutput(Utility.java:134)^M
> >
> >Apparently this thing is trying to return a web-logic-specific stream
> >(which
> >is incompatible with an FileInputStream) - which I don't want to use
> >or
> >learn about since I want my stuff to work under other webservers.
> >
> >Can anyone tell me what I'm doing wrong? This should be simple.
> >
> >-john
> >
> >
> >--
> >John Hilgedick
> >WisdomTools, Inc.
> >[email protected]
> >
> >
>
Maybe you are looking for
-
How to fix prop res dll not loaded
How do I fix the error message Prop Res DLL not loaded. I can no longer print PDF files and the computer locks up
-
Hi, We are on BW 3.1C and have different process chains for our US Hourly Refresh and UK Process Chains which runs every night. We are using different Process variants for each chain. Our Hourly refresh chain is sometimes overlapping with nightly ch
-
How to resize the column header according to row data
Hi, How can i resize the column header according to row date .. means if data is small header should be small and vice versa ,... Any help is appreciated .. Snippet will be more helpful . Thanks, Shekhar
-
Error: native library oljdbc40.dll already loaded in another classloader
Hi, we're using Oracle 8iLite in combination with Tomcat (on WinNT4.0) to run servlets accessing our OLite db. We use a deployed db (Deployment tool: PolUtil.exe) and pure JDBC connections. When starting tomcat, the servlet is automatically initializ
-
I'm using one of the templates in Motion and when I drop in a photo into the drop zone I'd like to resize the dropped in pic. Can't figure out how to do this. Can it be done?