Need help regarding implementing SSAS solution using microsoft decision trees algorithm

Hi All,
I am new to SSAS and Data Mining techniques. I dnt have a good knowledge about data mining in SSAS.  I have a requirement regarding predictive analysis and want to check whether i can implement SSAS for it. 
I have two tables namely Tree and Node. The Tree table has the columns namely NodeID, ParentID and Level. The ParentID in the tree table represents a node in the node table and at the same time the nodeid in the tree table also represents the nodeid in the
node table.
If you run the below query, it will list out all the possibilities of getting the nodename 'CTRYIMPACT - High - PRODIMPACT - Low - Question 6'
select p.*
from Node n, Tree t, Node p
where n.NodeName='CTRYIMPACT - High - PRODIMPACT - Low - Question 6'
and n.NodeId = t.NodeId
and t.ParentId = p.NodeId
I want to predict the various nodenames that are possible by inputting a NodeID using analysis services. If this is done, then i can implement it in my project. 
I went over this link to know about implementing decision tress but, they have used only a single table in the example. Since I have two tables i am struck in the middle. And also they have not specified clearly of what they need to achieve. They have just
stated that on changing the play the value changes. 
http://www.mssqltips.com/sqlservertip/2965/classic-machine-learning-example-in-sql-server-analysis-services/
Can anyone help me with this?
Below is the link for data containing the values for the Node and Tree table.
https://www.dropbox.com/s/hpzooa039zbtkk8/analysis_services_data.xlsx?dl=0
Thanks you and Kind Regards, Karthik Venkatraman

Hi Karthink,
Acording to your description, you need to predict the various nodenames that are possible by inputting a NodeID using analysis services, right?
In your scenario, in order to make prediction in Data Mining Model, we would create a prediction query. Before we can create a prediction query, we need to build a Data Mining Model. Please refer to the links below to see the detail infomaton.
http://msdn.microsoft.com/en-in/library/bb677206.aspx
http://msdn.microsoft.com/en-in/library/hh213169.aspx
http://captechconsulting.com/blog/mark-hudson/making-predictions-microsoft-data-mining-tools-%E2%80%93-part-ii
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Similar Messages

  • Need help regarding simple Crypto app use DESKey

    Hi Friends..
    I'm currently use JCDK 2.2.2 with the JCWDE to do some exercise with Cryptography in JCDK 2.2.2..
    I tried to develop simple application for Encrypt any data, but i don't know why, i always got the unexpected SW result..
    I always got 6D 00 SW..
    here's my snippet code :
            private DESKey staticKey;
         private Cipher cipher;
         static byte[] singleDESKey =
         (byte)0x38, (byte)0x12, (byte)0xA4, (byte)0x19, (byte)0xC6, (byte)0x3B, (byte)0xE7, (byte)0x71
         private TestCrypto(){
              staticKey = (DESKey) KeyBuilder.buildKey(KeyBuilder.TYPE_DES, KeyBuilder.LENGTH_DES, false);
              staticKey.setKey(singleDESKey, (short)0);
              cipher=Cipher.getInstance(Cipher.ALG_DES_CBC_NOPAD, false);
              cipher.init(staticKey, Cipher.MODE_ENCRYPT);
            //any code to process the Incoming APDU Command..When i tried to send some APDU Commands.. i always got SW 6D00, and i got this message in the JCWDE simulator :
    jcwde is listening for T=1 Apdu's on TCP/IP port 9,025.
    Exception from the invoked install() method:public static void com.latihan.chaining.TestCrypto.install(byte[],short,byte) throws javacard.framework.ISOException
    jcwde exiting on receipt of power down command.if i remove these codes in the constructor, i got SW 9000..
    cipher=Cipher.getInstance(Cipher.ALG_DES_CBC_NOPAD, false);
    cipher.init(staticKey, Cipher.MODE_ENCRYPT);What is the exactly problem?..
    Please help me regarding this..
    Thanks in advance..

    Continue from my previous post..
    If i deploy it into Card Java Card 2.2.1 it could run well, even i can do Encrypt or Decrypt without any problem occurred..
    is there anyone has ever faced the same problem?
    Please correct me if i'm wrong
    Thanks in advance..

  • I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.

    I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.
    I am using Labview 8 ... I  need to develop a software to accquire the ECG data (simulated enironment ) and compute the time domain parameters of Heart rate variability like "SDNN, SDANN...etc". Can some 1 plllzzzz help me out.Plzz help me if u can.Thanx in advance.

    Hi Andy,
      Thanx for responding.  The input is from a text file. SDNN, SDANN,etc are  the timedomain parameters of heart rate variability.
     SDNN: the standard deviation of the NN or RR interval  i.e. the square root of variance.
    SDANN:the standard deviation of the averageNN interval calculated over short periods, usually 5 min,which is an estimate of the changes in heart rate due tocycles longer than 5 min
    SDNN index, the meanof the 5-min standard deviation of the NN intervalcalculated over 24 h,
     RMSSD: the square root ofthe mean squared differences of successive NN intervals
    NN50: the number of interval differences of successiveNN intervals greater than 50 ms, and
    pNN50 the proportionderived by dividing NN50 by the total numberof NN intervals.
    The problem is dat I am a fresher to the world of Labview. I have jus recently started working on it. Can u please suggest me some some idea as soon as possible.
      As i said  I have the ECG data in the form of text files..I need to create sort of GUI to calculate the time domain parmeters....I need help urgently. Plzzz help me if u can. If u have and .vi example to calculate the RR interval plzz send it to me ASAP.
    Thanku

  • Need Help Regarding JAVA BEAN

    Is any one tell me that JAVA BEAN only used in WEB or also you in Desktop applications???? and aslo tell how i implement Java class and use JAVA BEAN. I need help regarding above matter
    thanks in advance
    Rehan MIrza

    Here is a good link that indicate that JavaBean is not only for applets
    http://java.sun.com/docs/books/tutorial/javabeans/whatis/beanDefinition.html
    quote:
    The JavaBeans API makes it possible to write component software in the Java programming language. Components are self-contained, reusable software units that can be visually composed into composite components, applets, applications, and servlets using visual application builder tools. JavaBean components are known as Beans.
    Francois

  • Need HELP regarding installinfg CR2008/Visual Advantage

    I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
    HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
    I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
    HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
    HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
    Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

    Hi Shamish
    Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
    1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
    PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
    PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
    2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
    So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
    Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
    One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
    Best regards
    Michael

  • I need help regarding setting my mail accounts on macbook pro

    I need help regarding resetting my mail accounts on macbook pro

    What kind of accounts do you need to reset? IMAP or POP accounts using one of the many web-based messaging systems? An Exchange server account? Were they working and now just not working any longer?
    You're going to have to be a little more specific in what you need...
    Clinton

  • I need help regarding installation of Netweaver 2004s

    Hi,
    I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
    " SAPinst is getting started.
    Please be patient ...
    starting gui server process:
      sapinstport: 21200
      guiport    : 21212
      guistart   : true
      command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
    load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
    guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
    guiengine: login in process...............................
    guiengine: login timeout; the client was unable to establish a valid connection
    Exit status of child: 1"
    Regards,
    Farooq Shaik.

    Hi
    Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

  • Need Help regarding text Output

    Dear gurus.
    I need help regarding formatting of a text.
    I want to format a employee sub group text.
    im getting a text workers (7) from a table t503t having field ptext.
    i want to show only (7) in the output not the whole text how can i do this ?
    Please help
    regards
    Saad.Nisar

    DATA: BEGIN OF itab_odoe OCCURS 0,
      department_text LIKE t527x-orgtx,"Holds the short text for department
      department_no LIKE pernr-orgeh,
      pernr LIKE pernr-pernr,
      ename LIKE pernr-ename,
      grade like t503t-ptext,   "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
    *  department_text LIKE t527x-orgtx,"Holds the short text for department
      current_year LIKE sy-datum,
      wt0001 LIKE q0008-betrg,"Basic Pay
      wt1101 LIKE q0008-betrg," COLA
      wt3002 LIKE p0015-betrg,"Overtime
      per_basic type p DECIMALS 2,"Overtime percentage on basic
      per_basic_sum type p decimals 2,"Overtime Sum Division
      overtime_sum LIKE p0015-betrg,"holds sum of overtime
      basic_sum like q0008-betrg,"holds sum of basic
    END OF itab_odoe.
    Im using the select statement to get the employee subgroup from the table
    select single ptext
        from t503t
        into itab_odoe-grade
        where persk eq pernr-persk
        AND SPRSL eq 'EN'.
    now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
    i want to show only the text in Brackets.

  • Need help regarding image scanning from scanner and resizing it...

    Hi,
    I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!
    Thanks,
    Avinash.
    Edited by: Kalakonda on Jul 24, 2009 8:08 AM

    Kalakonda wrote:
    I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!So what you are doing is you have a Scanner (hardware: like an HP flatbed scanner) attached to a server that you want to use as a scanning station? Is this the senario that you are talking about?

  • Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

    Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
    I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
    Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
    Please please post here.
    Thanks
    Tiaan

    Greetings fcit@!A,
    After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
    Why can’t I select None when I edit my Apple ID payment information? - Apple Support
    Thanks for using Apple Support Communities.
    Take care,
    Mario

  • Need Help in Splitting a String Using SQL QUERY

    Hi,
    I need help in splitting a string using a SQL Query:
    String IS:
    AFTER PAINT.ACOUSTICAL.1..9'' MEMBRAIN'I would like to seperate this string into multiple lines using the delimeter .(dot)
    Sample Output should look like:
    SNO       STRING
    1            AFTER PAINT
    2            ACOUSTICAL
    3            1
    4            
    5            9" MEMBRAIN
    {code}
    FYI i am using Oracle 9.2                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    There's this as well:
    with x as ( --generating sample data:
               select 'AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN' str from dual union all
               select 'BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN' str from dual)
    select str,
           row_number() over (partition by str order by rownum) s_no,
           cast(dbms_xmlgen.convert(t.column_value.extract('//text()').getstringval(),1) as varchar2(100)) res
    from x,
         table(xmlsequence(xmltype('<x><x>' || replace(str,'.','</x><x>') || '</x></x>').extract('//x/*'))) t;
    STR                                                S_NO RES                                                                                                
    AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN                 1 AFTER PAINT                                                                                        
    AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN                 2 ACOUSTICAL                                                                                         
    AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN                 3 1                                                                                                  
    AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN                 4                                                                                                    
    AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN                 5 9" MEMBRAIN                                                                                        
    BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN          1 BEFORE PAINT                                                                                       
    BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN          2 ELECTRIC                                                                                           
    BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN          3 2                                                                                                  
    BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN          4                                                                                                    
    BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN          5 45 caliber MEMBRAIN      
    {code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Need help regarding SELECT statement

    Hello, first time here but need help badly.
    I been using SQL syntax with another SQL server by the following statement doesnt seem to work in Oracle database.
    SELECT firstname+" "+lastname AS fullname FROM customers
    basicially, I just want to display date from two column as one column.
    Thanks

    Oracle has pipe sign for concate
    SELECT firstname||' '||lastname AS fullname
    FROM customers;Khurram

  • Need Help Regarding Enabling The Matrix

    Hi All,
    We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
    Regards,
    Jayanth

    Hey first bind the columns of matrix to any user datasource
    and then you can enter any thing into your matrix 
    following code may help
    suppose you have one column
    oForm = SBO_Application.Forms.Item("URFRM")
    oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
    SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
    oMatrix=oForm.Item("URMATRX")
    oMatrix = oItem.Specific
    oColumns = oMatrix.Columns
    oColumn = oColumns.Item("URCOLName")
    oColumn.DataBind.SetBound(True, "", "URDSName")
    oMatrix.Addrow()
    hope this will help
    additionally you can look at this sample
    .....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

  • I need help please , i try to use itunes but my iPhone don't appear on itunes, i try everyting ,dowwload itunes again restart computer and iPhone,restart running device support,etc.

    i need help please , i try to use itunes but my iPhone don't appear on itunes, i try everyting ,dowwload itunes again restart computer and iPhone,restart running device support,etc.

    Windows doesn't detect iPhone: http://support.apple.com/kb/ts1538
    Mac: http://support.apple.com/kb/ts1591

  • I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

    I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

    Encryption wouldn't matter except for Wifi.
    While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
    Tiger Requirements...
    To use Mac OS X 10.4 Tiger, your Macintosh needs:
        * A PowerPC G3, G4, or G5 processor
        * Built-in FireWire
        * At least 256 MB of RAM (I recommend 1GB minimum)
        * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
        * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools  (I recommend 20GB minimum)
    http://support.apple.com/kb/HT1514
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
    See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
    https://discussions.apple.com/message/15305521#15305521
    Or Ali Brown's great info on where/how to find/get Tiger...
    http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
    As far as Memory, that's sort of easy, find your eMac here...
    http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
    As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
    http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

Maybe you are looking for

  • Xserve RAID volume maintenance

    A new client has an Xserve RAID (firmware 1.5) in which the first 7 drive modules are populated, and configured into a 1.01 TB Level 5 array. This array has been in use for (estimated) 2.5 to 3 years (based on the power-on hours of the component hard

  • Where is the "Settings" Option in Camera Raw 4.1 in Elements 5?

    I'm using Elements 5 on Windows XP Home Version. Where is the "Settings" Option on RAW 4.1? On RAW 3.5 it was underneath the Histogram. I need to copy settings from a previous RAW file, so I can combine two images into one. The Help Menu on Elements

  • Dynamic modification rule

    Hi, what is dynamic modification rue functionality in qm? pls explain with one example how to use the same.

  • Need help in Customization in Oracle Business Intelligence.

    Hi Guru, I am working on ODI to customize Oracle Business Intelligence ( Category 1 and Category 2 Customization ). I need comprehensive / detail documentation on "OBI Customization" and "RPD Modification" . Kindly help and advice. I use OBIEE 11.1.1

  • How do you know where your files are if you save them in the wrong place?

    I have tons of video files for example. I want to watch the video I downloaded off the net about airplanes. I type in airplanes in spotlight, and many come up. they are quicktime files. but when I go to quicktime and try to delete by clicking on file