Need help regarding Issues while use T=0/T=1 Protocol

Hi Friends..
I developed an Simple Applet to be Personalized by Datacard Machine..
This Applet is downloaded and installed in 2 difference protocol, (T=0 and T=1)..
This is a little description of my Applet :
CLA used is (byte) 0x80, otherwise SW 6E00 returned
INS (byte) 0x20 : is used for Ingoing Command (To Send Data to Applet)
INS (byte) 0x30 : is used for Outgoing Command (To Get Data From Applet)
P1 = (byte) 0x00 : is used to Send Data and Get Data for field Employee code
Case T=0 :*
I tried to send this APDU through Datacard Machine :
80 20 00 00 05 01 02 03 04 05 00
the SW resulted is 90 00
After that i tried to send this APDU through Datacard Machine :
80 30 00 00 00
There's no Response Data, and the SW resulted is 61 08
But, if i try to Get Data using SmartCardIO, i can get Data as i want, and the SW is 90 00
What is the meaning of SW 61 08?
I think this SW tells me that there's 8 bytes remaining data (but i don't know whether this is correct)..
But in the Case T=1 Protocol :*
I did the same thing, and there's no error returned..
i can Read an Write without any error..
Please correct me if i'm wrong..
Any help would be appreciated..
Thanks
Edited by: Leonardo Carreira on Oct 27, 2010 7:49 PM
Edited by: Leonardo Carreira on Oct 28, 2010 6:22 PM
Change the title

Leonardo Carreira wrote:
After that i tried to send this APDU through Datacard Machine :
80 30 00 00 00
There's no Response Data, and the SW resulted is 61 08
But, if i try to Get Data using SmartCardIO, i can get Data as i want, and the SW is 90 00 The datacard machine may not handle the GET RESPONSE apdu for you. SmartcardIO does this transparently.
What is the meaning of SW 61 08?SW '61XX' = SW2 encodes the number of data bytes still available. This is because you are using T=0.
I think this SW tells me that there's 8 bytes remaining data (but i don't know whether this is correct)..That is correct
But in the Case T=1 Protocol :*
I did the same thing, and there's no error returned..
i can Read an Write without any error..This is due to the differences between T=0 and T=1 protocols. T=1 will send you a response containing the data, T=0 will send you the numbder of bytes it expects to return and waits for a GET RESPONSE before sending you the data. As mentioned above, SmartcardIO handles this for you transparently while other libraries mat not (RAW PC/SC does not). You can read more about this in ISO7816-3
Cheers,
Shane

Similar Messages

Need help regarding complex calculation using Max value and limiting data after Max date in MDX

I am working on a bit complex calculated measure in SSAS cube script mode.
Scenario /Data Set
Date
A
B
C
A+B
5/29/2014
Null
34
Null
34
6/30/2014
Null
23
45
68
7/15/2014
25
-25
Null
0
8/20/2014
-34
Null
Null
-34
9/30/2014
25
Null
60
25
10/15/2014
45
-45
Null
0
11/20/2014
7
8
Null
15
a) Need to capture latest non-null value of Column C based on date
with above example it should be 60 as of 9/30/2014
b) Need to capture column A+B for all dates.
c) Add values from column (A+B) only after latest date which is after 9/30/2014.
with above example it's last 2 rows and sum is 15
d) Finally add value from step a and step c. which means the calc measure value should be = 75
I need to perform all this logic in MDX. I was able to successfully get step a and b in separate calc measure, however i am not sure how to limit the scope based on certain date criteria. In this case it's, date> Max date(9/30/2014) . Also how should
i add calculated members and regular members?
I was able to get max value of C based on date and max date to limit the scope.
CREATE MEMBER CURRENTCUBE.[Measures].[LatestC] AS
TAIL(
NONEMPTY(
[Date].[Date].CHILDREN*[Measures].[C]),1).ITEM(0) ,visible=1;
CREATE MEMBER CURRENTCUBE.[Measures].[MaxDateofC] AS
TAIL(
NONEMPTY(
[Date].[Date].CHILDREN,[Measures].[C]),1).ITEM(0).MemberValue ,visible=1;
Please help with Scope statement to limit the aggregation of A+B for dates > MaxDateofC? Also further how to add this aggregation value to LatestC calc measure?
Thank You

Hi Peddi,
I gave TRUNC to both of the dates. But still the same issue. I think the problem is in returning the BolbDomain.
return blobDomain;
} catch (XDOException xdoe) {
System.out.println("Exception in XDO :");
throw new OAException("Exception in XDO : "+xdoe.getMessage());
catch (SQLException sqle) {
System.out.println("Exception in SQL :");
throw new OAException("SQL Exception : "+sqle.getMessage());
catch (OAException e) {
System.out.println("Exception in OA :");
throw new OAException("Unexpected Error :: " +e.getMessage());
Thanks and Regards,
Myvizhi

I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.

I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.
I am using Labview 8 ... I need to develop a software to accquire the ECG data (simulated enironment ) and compute the time domain parameters of Heart rate variability like "SDNN, SDANN...etc". Can some 1 plllzzzz help me out.Plzz help me if u can.Thanx in advance.

Hi Andy,
Thanx for responding. The input is from a text file. SDNN, SDANN,etc are the timedomain parameters of heart rate variability.
SDNN: the standard deviation of the NN or RR interval i.e. the square root of variance.
SDANN:the standard deviation of the averageNN interval calculated over short periods, usually 5 min,which is an estimate of the changes in heart rate due tocycles longer than 5 min
SDNN index, the meanof the 5-min standard deviation of the NN intervalcalculated over 24 h,
RMSSD: the square root ofthe mean squared differences of successive NN intervals
NN50: the number of interval differences of successiveNN intervals greater than 50 ms, and
pNN50 the proportionderived by dividing NN50 by the total numberof NN intervals.
The problem is dat I am a fresher to the world of Labview. I have jus recently started working on it. Can u please suggest me some some idea as soon as possible.
As i said I have the ECG data in the form of text files..I need to create sort of GUI to calculate the time domain parmeters....I need help urgently. Plzzz help me if u can. If u have and .vi example to calculate the RR interval plzz send it to me ASAP.
Thanku

Need HELP regarding installinfg CR2008/Visual Advantage

I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

Hi Shamish
Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
Best regards
Michael

Need Help regarding a simple mobile application

Hello friends,
I am bit newbee to J2ME technology.
I have basic understanding about MIDLETS.
Friends,i am designing an instant messenger using midlet.
Could anyone send some idea's of how to design a CHAT application.IF some one can give a small code of implementing it could be really helpful....
Looking for your help!!!
Thanks In Advance !!!
Regards,
RAHUL

You have been no help but I will post again hoping someone else can reply....
Here is a more exact detailing of what I am trying to do:
I am hosting a text file here:
http://www.geocities.com/biocx/entertainer.txt
And when I open up MMAPI Demo and go to simple player, and then URL and paste this in, it plays the simple rtttl/midi file. It is doing this through RingToneConverter.
Now all I want to do, and this is the part I need help with, is while it is playing, I want the notes to be displayed on screen. Can anyone help me with this! I have tried and every time is gives me a problem saying that the RingToneConverter Class isn't abstract and I cannot print to screen...
If someone could help me with this, it would be greatly appreciated.
Thank you,
Mike

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
Tiaan

Greetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario

Need help writing host program using LabView.

Need help writing host program using LabView.
Hello,
I'm designing a HID device, and I want to write a host program using National Instrument's LabView. NI doesn't have any software support for USB, so I'm trying to write a few C dll files and link them to Call Library Functions. NI has some documentation on how to do this, but it's not exactly easy reading.
I've written a few C console programs (running Win 2K) using the PC host software example for a HID device from John Hyde's book "USB by design", and they run ok. From Hyde's example program, I've written a few functions that use a few API functions each. This makes the main program more streamlined. The functions are; GetHIDPath, OpenHID, GetHIDInfo, Writ
eHID, ReadHIC, and CloseHID. As I mentioned, my main program runs well with these functions.
My strategy is to make dll files from these functions and load them into LabView Call Library Functions. However, I'm having a number of subtle problems in trying to do this. The big problem I'm having now are build errors when I try to build to a dll.
I'm writing this post for a few reasons. First, I'm wondering if there are any LabView programmers who have already written USB HID host programs, and if they could give me some advice. Or, I would be grateful if a LabView or Visual C programmer could help me work out the programming problems that I'm having with my current program. If I get this LabView program working I would be happy to share it. I'm also wondering if there might already be any USB IHD LabView that I could download.
Any help would be appreciated.
Regards, George
George Dorian
Sutter Instruments
51 Digital DR.
Novato, CA 94949
USA
[email protected]
m
(415) 883-0128
FAX (415) 883-0572

George may not answer you. He hasn't been online here for almost eight years.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Need Help Regarding JAVA BEAN

Is any one tell me that JAVA BEAN only used in WEB or also you in Desktop applications???? and aslo tell how i implement Java class and use JAVA BEAN. I need help regarding above matter
thanks in advance
Rehan MIrza

Here is a good link that indicate that JavaBean is not only for applets
http://java.sun.com/docs/books/tutorial/javabeans/whatis/beanDefinition.html
quote:
The JavaBeans API makes it possible to write component software in the Java programming language. Components are self-contained, reusable software units that can be visually composed into composite components, applets, applications, and servlets using visual application builder tools. JavaBean components are known as Beans.
Francois

I need help regarding setting my mail accounts on macbook pro

I need help regarding resetting my mail accounts on macbook pro

What kind of accounts do you need to reset? IMAP or POP accounts using one of the many web-based messaging systems? An Exchange server account? Were they working and now just not working any longer?
You're going to have to be a little more specific in what you need...
Clinton

I need help regarding installation of Netweaver 2004s

Hi,
I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
" SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport    : 21212
guistart   : true
command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
guiengine: login in process...............................
guiengine: login timeout; the client was unable to establish a valid connection
Exit status of child: 1"
Regards,
Farooq Shaik.

Hi
Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

Need Help regarding text Output

Dear gurus.
I need help regarding formatting of a text.
I want to format a employee sub group text.
im getting a text workers (7) from a table t503t having field ptext.
i want to show only (7) in the output not the whole text how can i do this ?
Please help
regards
Saad.Nisar

DATA: BEGIN OF itab_odoe OCCURS 0,
department_text LIKE t527x-orgtx,"Holds the short text for department
department_no LIKE pernr-orgeh,
pernr LIKE pernr-pernr,
ename LIKE pernr-ename,
grade like t503t-ptext,   "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
* department_text LIKE t527x-orgtx,"Holds the short text for department
current_year LIKE sy-datum,
wt0001 LIKE q0008-betrg,"Basic Pay
wt1101 LIKE q0008-betrg," COLA
wt3002 LIKE p0015-betrg,"Overtime
per_basic type p DECIMALS 2,"Overtime percentage on basic
per_basic_sum type p decimals 2,"Overtime Sum Division
overtime_sum LIKE p0015-betrg,"holds sum of overtime
basic_sum like q0008-betrg,"holds sum of basic
END OF itab_odoe.
Im using the select statement to get the employee subgroup from the table
select single ptext
    from t503t
    into itab_odoe-grade
    where persk eq pernr-persk
    AND SPRSL eq 'EN'.
now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
i want to show only the text in Brackets.

Need Help Regarding ibook

em user of   iphone 3gs os 6.1.6
Yesterday i restore ma iphone
after that em Unable to   install    ibook in ma iphone its say me that u need os 7 ...
need help regarding this issue....   what i do is there any alternative app ...?

Hey Seungly,
I've realized that my computer runs fine UNLESS I turn the AirPort on to connect to the Internet. The moment I click "Turn AirPort On," the "You need to restart your computer" screen immediately pops up. Is there any connection between AirPort and my problem?
That could very easily be the case, a bad Airport card. Look at this recent post:
http://discussions.apple.com/thread.jspa?messageID=7960754&#7960754
John diagnosed it from the panic log.
Does yours say something similar?
Richard

Need help regarding image scanning from scanner and resizing it...

Hi,
I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!
Thanks,
Avinash.
Edited by: Kalakonda on Jul 24, 2009 8:08 AM

Kalakonda wrote:
I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!So what you are doing is you have a Scanner (hardware: like an HP flatbed scanner) attached to a server that you want to use as a scanning station? Is this the senario that you are talking about?

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!! iPhone 4S, iOS 5.0.1

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
iPhone 4S, iOS 5.0.1

Try updating to iOS 6.1.3.

Need HELP (Project Issue) : Having 3 individual VIs, datalogger.vi, start vi, amksms.vi done. (How to run the VIs in sequence order - datalogger start amksms combine into 1 VIs? )

Need HELP (Project Issue) : Having 3 individual VIs, datalogger.vi, start vi, amksms.vi done.
(How to run the VIs in sequence order - datalogger > start > amksms combine into 1 VIs? )

VIs in icon.
how would it able to run in the sequence order:
data first, follow by start and lastly amk sms.
Attachments:
dsa.jpg ‏10 KB

Need help regarding Issues while use T=0/T=1 Protocol

Similar Messages

Maybe you are looking for