Need Help Regarding Material Characteristics Validation in MM02

Hello Experts ,
Here I am stuck with one requirement .  I need to validate the combination of characteristics entered in MM02 transaction.
For this reason I have Implemented method MODIFY_INPUT of BADI CACL_VALUE_CHANGE . But this method captured characteristics one by one, not all at once. but as per my requirement I need all the characteristics at once to verify the combination.
How can I check and validate all the characteristics before the material is saved ?
Your help would be appreciated.

Hi
Check the material master records of the materials M1 and M2 for the conversion ratios maintained between the base UOM and the case. Guess, the 0.3 case of the material M1 might be having units that are equal to one case of material 2.
The standard functionality is not related to the quantities. It is only to substitute the materials.
Thanks,
Ravi

Similar Messages

  • Need Help regarding SSO token validation machanisim

    Hi all,
    We are using Oracle CRM on demand with our own web app(struts) using Applet(web link). We are using SSO for all verification. Currently for each call to weblink, we need to verify SSO token with oracle on demand in our action class. We want to cut down the SSO verification hit to CRM server. Can we have a some way to achieve this?
    Once a user logs in crm, crm will send a SSO token. Once user clicks our weblink first time, a SSO token verification will be happen in our server and authenticate to use our app. Then next all subsequent requests form this same user wouldn't go to SSO verification again as it is already done in login time. We will allow user to access our app based on the SSO expire time.
    How can we achieve this? Appreciate your gr8 help.
    Thanks
    Suman

    what are you going to do stop insert/update upon commit?
    -- use on-insert trigger
    if allowed_to_insert then
    insert_record;
    end if;
    -- use on-update trigger
    if allowed_to_update then
    update_record;
    end if;
    if when entering data, you might want to check set_block_property

  • I need help regarding installation of Netweaver 2004s

    Hi,
    I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
    " SAPinst is getting started.
    Please be patient ...
    starting gui server process:
      sapinstport: 21200
      guiport    : 21212
      guistart   : true
      command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
    load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
    guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
    guiengine: login in process...............................
    guiengine: login timeout; the client was unable to establish a valid connection
    Exit status of child: 1"
    Regards,
    Farooq Shaik.

    Hi
    Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

  • Need HELP regarding installinfg CR2008/Visual Advantage

    I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
    HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
    I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
    HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
    HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
    Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

    Hi Shamish
    Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
    1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
    PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
    PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
    2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
    So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
    Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
    One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
    Best regards
    Michael

  • Need Help Regarding Enabling The Matrix

    Hi All,
    We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
    Regards,
    Jayanth

    Hey first bind the columns of matrix to any user datasource
    and then you can enter any thing into your matrix 
    following code may help
    suppose you have one column
    oForm = SBO_Application.Forms.Item("URFRM")
    oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
    SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
    oMatrix=oForm.Item("URMATRX")
    oMatrix = oItem.Specific
    oColumns = oMatrix.Columns
    oColumn = oColumns.Item("URCOLName")
    oColumn.DataBind.SetBound(True, "", "URDSName")
    oMatrix.Addrow()
    hope this will help
    additionally you can look at this sample
    .....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

  • Need Help Regarding JAVA BEAN

    Is any one tell me that JAVA BEAN only used in WEB or also you in Desktop applications???? and aslo tell how i implement Java class and use JAVA BEAN. I need help regarding above matter
    thanks in advance
    Rehan MIrza

    Here is a good link that indicate that JavaBean is not only for applets
    http://java.sun.com/docs/books/tutorial/javabeans/whatis/beanDefinition.html
    quote:
    The JavaBeans API makes it possible to write component software in the Java programming language. Components are self-contained, reusable software units that can be visually composed into composite components, applets, applications, and servlets using visual application builder tools. JavaBean components are known as Beans.
    Francois

  • I need help regarding setting my mail accounts on macbook pro

    I need help regarding resetting my mail accounts on macbook pro

    What kind of accounts do you need to reset? IMAP or POP accounts using one of the many web-based messaging systems? An Exchange server account? Were they working and now just not working any longer?
    You're going to have to be a little more specific in what you need...
    Clinton

  • Need Help regarding text Output

    Dear gurus.
    I need help regarding formatting of a text.
    I want to format a employee sub group text.
    im getting a text workers (7) from a table t503t having field ptext.
    i want to show only (7) in the output not the whole text how can i do this ?
    Please help
    regards
    Saad.Nisar

    DATA: BEGIN OF itab_odoe OCCURS 0,
      department_text LIKE t527x-orgtx,"Holds the short text for department
      department_no LIKE pernr-orgeh,
      pernr LIKE pernr-pernr,
      ename LIKE pernr-ename,
      grade like t503t-ptext,   "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
    *  department_text LIKE t527x-orgtx,"Holds the short text for department
      current_year LIKE sy-datum,
      wt0001 LIKE q0008-betrg,"Basic Pay
      wt1101 LIKE q0008-betrg," COLA
      wt3002 LIKE p0015-betrg,"Overtime
      per_basic type p DECIMALS 2,"Overtime percentage on basic
      per_basic_sum type p decimals 2,"Overtime Sum Division
      overtime_sum LIKE p0015-betrg,"holds sum of overtime
      basic_sum like q0008-betrg,"holds sum of basic
    END OF itab_odoe.
    Im using the select statement to get the employee subgroup from the table
    select single ptext
        from t503t
        into itab_odoe-grade
        where persk eq pernr-persk
        AND SPRSL eq 'EN'.
    now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
    i want to show only the text in Brackets.

  • I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.

    I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.
    I am using Labview 8 ... I  need to develop a software to accquire the ECG data (simulated enironment ) and compute the time domain parameters of Heart rate variability like "SDNN, SDANN...etc". Can some 1 plllzzzz help me out.Plzz help me if u can.Thanx in advance.

    Hi Andy,
      Thanx for responding.  The input is from a text file. SDNN, SDANN,etc are  the timedomain parameters of heart rate variability.
     SDNN: the standard deviation of the NN or RR interval  i.e. the square root of variance.
    SDANN:the standard deviation of the averageNN interval calculated over short periods, usually 5 min,which is an estimate of the changes in heart rate due tocycles longer than 5 min
    SDNN index, the meanof the 5-min standard deviation of the NN intervalcalculated over 24 h,
     RMSSD: the square root ofthe mean squared differences of successive NN intervals
    NN50: the number of interval differences of successiveNN intervals greater than 50 ms, and
    pNN50 the proportionderived by dividing NN50 by the total numberof NN intervals.
    The problem is dat I am a fresher to the world of Labview. I have jus recently started working on it. Can u please suggest me some some idea as soon as possible.
      As i said  I have the ECG data in the form of text files..I need to create sort of GUI to calculate the time domain parmeters....I need help urgently. Plzzz help me if u can. If u have and .vi example to calculate the RR interval plzz send it to me ASAP.
    Thanku

  • Need Help Regarding  ibook

    em user of   iphone  3gs  os 6.1.6
    Yesterday  i restore ma  iphone
    after that  em  Unable  to   install    ibook in  ma iphone  its  say me that u  need  os 7 ...
    need help regarding this issue....   what i do  is there any alternative app  ...?

    Hey Seungly,
    I've realized that my computer runs fine UNLESS I turn the AirPort on to connect to the Internet. The moment I click "Turn AirPort On," the "You need to restart your computer" screen immediately pops up. Is there any connection between AirPort and my problem?
    That could very easily be the case, a bad Airport card. Look at this recent post:
    http://discussions.apple.com/thread.jspa?messageID=7960754&#7960754
    John diagnosed it from the panic log.
    Does yours say something similar?
    Richard

  • Need help regarding image scanning from scanner and resizing it...

    Hi,
    I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!
    Thanks,
    Avinash.
    Edited by: Kalakonda on Jul 24, 2009 8:08 AM

    Kalakonda wrote:
    I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!So what you are doing is you have a Scanner (hardware: like an HP flatbed scanner) attached to a server that you want to use as a scanning station? Is this the senario that you are talking about?

  • Need help regarding may ipad, i cant access my ipad, need help regarding may ipad, i cant access my ipad

    need help regarding may ipad, i cant access my ipad, need help regarding may ipad, i cant access my ipad

    Can you be little more specific?

  • Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

    Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
    I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
    Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
    Please please post here.
    Thanks
    Tiaan

    Greetings fcit@!A,
    After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
    Why can’t I select None when I edit my Apple ID payment information? - Apple Support
    Thanks for using Apple Support Communities.
    Take care,
    Mario

  • Need help regarding Java decoding of IMAP attachment (IOStream related ques

    Hi ,
    I need some help regarding the processing of an IMAP attachment , It is a basic IOStream related question I guess.
    I have some attachment to a mail , I try to fetch it using javamail and read the content and write it to a file , I was able to do it successfully when I was using stream.read( tempBuffer) function but when I started using stream.read( tempBuffer, 0, m_maxDataSize ); it is giving me following exception
    java.io.IOException: Error in encoded stream: needed at least 2 valid base64 characters, but only got 1 before padding character (=), the 10 most recent characters were: "/59PT/eXQ="
         at com.sun.mail.util.BASE64DecoderStream.decode(BASE64DecoderStream.java:259)
         at com.sun.mail.util.BASE64DecoderStream.read(BASE64DecoderStream.java:148)
    ***Here is the snippet of code that is running this:***
    m_contentObj = m_message.getContent();
    if(m_contentObj instanceof InputStream)
         System.out.println(" Content is type of InputStream");
         InputStream stream = (InputStream) m_contentObj;
         byte[] tempBuffer = new byte[m_maxDataSize];
         stream.skip( m_currPos );
         int bytesRead=stream.read( tempBuffer, 0, m_maxDataSize );
         System.out.println(" Read the following no of bytes from the Object::"+bytesRead);
         m_currPos+=     bytesRead;
    Please suggest what to do.
    Thanks & Regards
    Saurabh

    BUMP, just incase its been missed by a new board member

  • Need help regarding Cycle counting

    Hi All,
    I need your help regarding cycle counting process in SAP PI. The scenario is as follows,
    At present in the legacy system business practice is to count certain number of materials say 100 materials every day. Out of these 100 materials; we keep fixed percentage for the materials to be counted i.e. out of 100 certain percentage will of A material, certain percentage will of B materials like wise.
    Also every day we want to generate a list of these 100 materials to be counted (this list can be handed over to inventory person to physically count the material) and  generation of PI documents to subsequently post the count results.
    Please note that we will be manually assigning cycle count indicator (A or B or C etc) in the material master.
    Thanks,
    Attarde

    from OSS Note 518418 - FAQ: Cycle Counting
    3. Question:
    I do not understand the determination of the date of physical inventory in the cycle counting physical inventory. How is the planned date or the date of physical inventory determined in the SAP system?
    Answer:
    In principle, the program calculates the planned date of physical inventory according to the following formula:
       planned date = base date + Interval (Trans.OMCO/Tab.XT159C-ININV)
    Usually, the base date is the 'date of the last physical inventory'. Depending on the type of the stock or the batch management requirement, this date is read from one of the following table fields:
      MARD-DLINL (Normal materials)
       MCHB-CHDLL (Batch materials, separately valuated materials)
    If no physical inventory has been carried out yet and if this date field is therefore empty, the system uses the creation date of the material as basis date. The basis date then comes from one of the following table fields:
      MSTA-ERSDA (Normal materials)
       MCHB-ERSDA (Batch materials, separately valuated materials)
    Since the cycle counting physical inventory always runs for the current fiscal year, the earliest possible physical inventory date is the 01.01. and the latest possible physical inventory date is the 31.12 of the current year.
    If the date of the physical inventory is a non-working day, the program automatically proposes the next possible workday.

Maybe you are looking for

  • Ship to party and Delivery address Different?

    The requirement is that the Ship to party address be different than the delivery address. Options i have thought about is 1) Maintain the ref address in TEXT. 2) Maintain a separate partner function. Please give suggestions as to how can we maintain

  • Table Structure  provided by SAP for Customer/Vendor

    Hi All,          We will be using Customer/vendor Business Content shipped by SAP.We will customize it to add our additonal fields needed.The table has close to 120 fields.So does it impact performance in any way.Ideally we would like to leave fields

  • Love Nuance VSuite 4.0 but how can I get it to capitalize the first word...

    In a sentence? Such a great tool, but now have to go back and capitalize every first word in a sentence. It capitalizes names and places appropriately. Is incredibly accurate. Any help would be appreciated. Thanks.

  • Regarding dataflow in mainwindow

    Hi, I have the following requirement.We hav one main window.Inside that we need to have two sections. The data in each section should flow to next page if the content is more.My requirement is like PAGE1 1 2 3 a b c Page2 4 5 6 d e f Notice the data

  • New itunes using up all my power

    Ever since installing the new itunes i cant import new cds as the computer is using up all its power. if i try to use another application at the same time as itunes the computer just freezes now. i've tried reinstalling and no change