Need help regarding old Frontpage site

Hello,
Does anyone out there know if there have been any extensions created for importing a Frontpage site into Dreamweaver CS4? I found them for much older Dreamweaver software but not the current one. Thanks to all in advance who give advice!
Ann

No you won't find it for more recent versions of dreamweaver.
The good news is that FrontPage died almost 10 years ago. So you can stop using it anytime.

Similar Messages

Need HELP regarding installinfg CR2008/Visual Advantage

I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

Hi Shamish
Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
Best regards
Michael

Need Help Regarding Enabling The Matrix

Hi All,
We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
Regards,
Jayanth

Hey first bind the columns of matrix to any user datasource
and then you can enter any thing into your matrix
following code may help
suppose you have one column
oForm = SBO_Application.Forms.Item("URFRM")
oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
oMatrix=oForm.Item("URMATRX")
oMatrix = oItem.Specific
oColumns = oMatrix.Columns
oColumn = oColumns.Item("URCOLName")
oColumn.DataBind.SetBound(True, "", "URDSName")
oMatrix.Addrow()
hope this will help
additionally you can look at this sample
.....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

Need Help Regarding JAVA BEAN

Is any one tell me that JAVA BEAN only used in WEB or also you in Desktop applications???? and aslo tell how i implement Java class and use JAVA BEAN. I need help regarding above matter
thanks in advance
Rehan MIrza

Here is a good link that indicate that JavaBean is not only for applets
http://java.sun.com/docs/books/tutorial/javabeans/whatis/beanDefinition.html
quote:
The JavaBeans API makes it possible to write component software in the Java programming language. Components are self-contained, reusable software units that can be visually composed into composite components, applets, applications, and servlets using visual application builder tools. JavaBean components are known as Beans.
Francois

I need help regarding setting my mail accounts on macbook pro

I need help regarding resetting my mail accounts on macbook pro

What kind of accounts do you need to reset? IMAP or POP accounts using one of the many web-based messaging systems? An Exchange server account? Were they working and now just not working any longer?
You're going to have to be a little more specific in what you need...
Clinton

I need help regarding installation of Netweaver 2004s

Hi,
I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
" SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport    : 21212
guistart   : true
command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
guiengine: login in process...............................
guiengine: login timeout; the client was unable to establish a valid connection
Exit status of child: 1"
Regards,
Farooq Shaik.

Hi
Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

Need Help regarding text Output

Dear gurus.
I need help regarding formatting of a text.
I want to format a employee sub group text.
im getting a text workers (7) from a table t503t having field ptext.
i want to show only (7) in the output not the whole text how can i do this ?
Please help
regards
Saad.Nisar

DATA: BEGIN OF itab_odoe OCCURS 0,
department_text LIKE t527x-orgtx,"Holds the short text for department
department_no LIKE pernr-orgeh,
pernr LIKE pernr-pernr,
ename LIKE pernr-ename,
grade like t503t-ptext,   "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
* department_text LIKE t527x-orgtx,"Holds the short text for department
current_year LIKE sy-datum,
wt0001 LIKE q0008-betrg,"Basic Pay
wt1101 LIKE q0008-betrg," COLA
wt3002 LIKE p0015-betrg,"Overtime
per_basic type p DECIMALS 2,"Overtime percentage on basic
per_basic_sum type p decimals 2,"Overtime Sum Division
overtime_sum LIKE p0015-betrg,"holds sum of overtime
basic_sum like q0008-betrg,"holds sum of basic
END OF itab_odoe.
Im using the select statement to get the employee subgroup from the table
select single ptext
    from t503t
    into itab_odoe-grade
    where persk eq pernr-persk
    AND SPRSL eq 'EN'.
now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
i want to show only the text in Brackets.

I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.

I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.
I am using Labview 8 ... I need to develop a software to accquire the ECG data (simulated enironment ) and compute the time domain parameters of Heart rate variability like "SDNN, SDANN...etc". Can some 1 plllzzzz help me out.Plzz help me if u can.Thanx in advance.

Hi Andy,
Thanx for responding. The input is from a text file. SDNN, SDANN,etc are the timedomain parameters of heart rate variability.
SDNN: the standard deviation of the NN or RR interval i.e. the square root of variance.
SDANN:the standard deviation of the averageNN interval calculated over short periods, usually 5 min,which is an estimate of the changes in heart rate due tocycles longer than 5 min
SDNN index, the meanof the 5-min standard deviation of the NN intervalcalculated over 24 h,
RMSSD: the square root ofthe mean squared differences of successive NN intervals
NN50: the number of interval differences of successiveNN intervals greater than 50 ms, and
pNN50 the proportionderived by dividing NN50 by the total numberof NN intervals.
The problem is dat I am a fresher to the world of Labview. I have jus recently started working on it. Can u please suggest me some some idea as soon as possible.
As i said I have the ECG data in the form of text files..I need to create sort of GUI to calculate the time domain parmeters....I need help urgently. Plzzz help me if u can. If u have and .vi example to calculate the RR interval plzz send it to me ASAP.
Thanku

Need Help on Configuring the Site to Site VPN from Cisco 2811 to Websense Cloud for web Traffic redirect

Hi All,
I need help on Configuring the Site to Site VPN from Cisco 2811 to Websense Cloud for web Traffic redirect
2811 having C2800NM-ADVIPSERVICESK9-M
2811 router connects to the Internet SW then connects to the Internet router.
Note- For Authentication am using the Device ID & Pre share key. I am worried as all user traffic goes with PAT and not firing up my tunnel for port 80 traffic. Can you please suggest what can be the issue ?
Below is router config for VPN & NAT
crypto keyring ISR_Keyring
pre-shared-key hostname vpn.websense.net key 2c22524d554556442d222d565f545246
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp keepalive 10
crypto isakmp profile isa-profile
   keyring ISR_Keyring
   self-identity user-fqdn [email protected]
   match identity user vpn-proxy.websense.net
crypto ipsec transform-set ESP-NULL-SHA esp-null esp-sha-hmac
crypto map GUEST_WEB_FILTER 10 ipsec-isakmp
set peer vpn.websense.net dynamic
set transform-set ESP-NULL-SHA
set isakmp-profile isa-profile
match address 101
interface FastEthernet0/1
description connected to Internet
ip address 216.222.208.101 255.255.255.128
ip access-group HVAC_Public in
ip nat outside
ip virtual-reassembly
duplex full
speed 100
no cdp enable
crypto map GUEST_WEB_FILTER
access-list 101 permit tcp 192.168.8.0 0.0.3.255 any eq www
access-list 103 deny   ip 192.168.8.0 0.0.3.255 host 85.115.41.187 log
access-list 103 deny   ip 192.168.8.0 0.0.3.255 host 85.115.41.181 log
access-list 103 deny   ip 192.168.8.0 0.0.3.255 host 85.115.41.182 log
access-list 103 deny   ip 192.168.8.0 0.0.3.255 86.111.216.0 0.0.1.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 116.50.56.0 0.0.7.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 86.111.220.0 0.0.3.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 103.1.196.0 0.0.3.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 177.39.96.0 0.0.3.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 196.216.238.0 0.0.1.255
access-list 103 permit ip 192.168.8.0 0.0.3.255 any
ip nat pool mypool 216.222.208.101 216.222.208.101 netmask 255.255.255.128
ip nat inside source list 103 interface FastEthernet0/1 overload
ip nat inside source route-map nonat pool mypool overload

How does Websense expect your source IPs in the tunnel? 192.168.8.0 0.0.3.255 or PAT'ed 216.222.208.101 ?
Check
show crypto isakmp sa
show crypto ipsec sa
show crypto session
You'd better remove the preshared key from your post.

Need Help Regarding ibook

em user of   iphone 3gs os 6.1.6
Yesterday i restore ma iphone
after that em Unable to   install    ibook in ma iphone its say me that u need os 7 ...
need help regarding this issue....   what i do is there any alternative app ...?

Hey Seungly,
I've realized that my computer runs fine UNLESS I turn the AirPort on to connect to the Internet. The moment I click "Turn AirPort On," the "You need to restart your computer" screen immediately pops up. Is there any connection between AirPort and my problem?
That could very easily be the case, a bad Airport card. Look at this recent post:
http://discussions.apple.com/thread.jspa?messageID=7960754&#7960754
John diagnosed it from the panic log.
Does yours say something similar?
Richard

Need help regarding image scanning from scanner and resizing it...

Hi,
I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!
Thanks,
Avinash.
Edited by: Kalakonda on Jul 24, 2009 8:08 AM

Kalakonda wrote:
I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!So what you are doing is you have a Scanner (hardware: like an HP flatbed scanner) attached to a server that you want to use as a scanning station? Is this the senario that you are talking about?

Need help regarding may ipad, i cant access my ipad, need help regarding may ipad, i cant access my ipad

need help regarding may ipad, i cant access my ipad, need help regarding may ipad, i cant access my ipad

Can you be little more specific?

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
Tiaan

Greetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario

Need help regarding 5.1 audio on sblive va

dear users,
i m tight on budget thats y cant afford the audigy series or any new hifi cards.. i need help in activating 5. audio on my sbli've value card though old but i always love it.. theres a feature li've surround and when i activate it my surround mixer shows fi've speakers and sound comes from 4 speakers i wonder how can i connect the 5th speaker.. 2ndly there r two analog outputs on the card which connects front two and rear two speakers theres another spdif output now is that to connect 5th speaker? also plz guide me about the spdif cable which will connect with sbli've value cards and how can i get its output from ? i m really amauter in this stuff plz guide and help me thanks
regards
muddassar

Muddassar,
The SB Li've Value is only a 4/4. speaker system card and that does not support a 5. speaker as you would not have the available jack for such connection.
Jason

Need help regarding Cisco 1841 Router

hello everyone , i am need of help regarding configuring of FE 0/1 port. our company have a cisco 1841 router. The serial 0/0/0 is connected with VSAT for internet. The FE 0/0 is connected to switch(LAN) through which net connectivity is provided to all users. Recently a new VSAT has been installed at our site,with different IP series. So every time we want to switch between the two net connectivity we need to change the entire IP configuration of all users, which in turn prohibits the users from accessing the printers,data servers etc which are been set to our existing IP series. So, my idea was to configure the FE 0/1, so that just by changing the DNS will help us providing internet along with all other devices without changing the entire IP series. The new VSAT modem has a lan cable which can be connected to FE 0/1. Can any one help out in solving the problem. Our existing IP series is 192.168.3.1..... and the new VSAT series is 10.205.74.1......

Bao
Do I understand correctly that you will have 20 remote users who will telnet to the 2511 and from the 2511 will use reverse telnet to access the console of router1, router2, router3, etc which have their console ports connected to async ports of the 2511? If that understanding is correct then the firewall only needs to open TCP port 23 for telnet. The other ports (2001, 2002, etc) are between the 2511 and router1, router2, etc and will not be seen by the firewall. If my understanding is not correct then please clarify.
I do not believe that you will find an image for the 2500 that supports SSH.
HTH
Rick

Need help regarding old Frontpage site

Similar Messages

Maybe you are looking for