Need help regarding short dumps in BW

hi all,
We have a problem in our production.Thousands of short dumps have been created in a day stating
"Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB"
=====================
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure "INSERT_ODS"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-14400: inserted partition key does not map to
any partition"
===================
The RSRV check shows "Inconsistency: High value for table /BIC/B0000xxx000: 0002 ; PARTNO value in RSTSODS: 010."
When a repair was run on this table the short dumps stopped.Is there any other steps that should be taken to avoid such dumps in future/is there something that we have missed to maintainin in BW.
Please explain in detail, it will be of great help.
Thanks

Hi All,
Thanks a lot for the valuable messages.
So when all these stated notes are followed, and if in future if a simillar problem comes, the recovery step would be running the RSRV test and repair on the particular object?
Thanks once again.
Shailaja

Similar Messages

Need Help regarding text Output

Dear gurus.
I need help regarding formatting of a text.
I want to format a employee sub group text.
im getting a text workers (7) from a table t503t having field ptext.
i want to show only (7) in the output not the whole text how can i do this ?
Please help
regards
Saad.Nisar

DATA: BEGIN OF itab_odoe OCCURS 0,
department_text LIKE t527x-orgtx,"Holds the short text for department
department_no LIKE pernr-orgeh,
pernr LIKE pernr-pernr,
ename LIKE pernr-ename,
grade like t503t-ptext,   "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
* department_text LIKE t527x-orgtx,"Holds the short text for department
current_year LIKE sy-datum,
wt0001 LIKE q0008-betrg,"Basic Pay
wt1101 LIKE q0008-betrg," COLA
wt3002 LIKE p0015-betrg,"Overtime
per_basic type p DECIMALS 2,"Overtime percentage on basic
per_basic_sum type p decimals 2,"Overtime Sum Division
overtime_sum LIKE p0015-betrg,"holds sum of overtime
basic_sum like q0008-betrg,"holds sum of basic
END OF itab_odoe.
Im using the select statement to get the employee subgroup from the table
select single ptext
    from t503t
    into itab_odoe-grade
    where persk eq pernr-persk
    AND SPRSL eq 'EN'.
now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
i want to show only the text in Brackets.

I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.

I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.
I am using Labview 8 ... I need to develop a software to accquire the ECG data (simulated enironment ) and compute the time domain parameters of Heart rate variability like "SDNN, SDANN...etc". Can some 1 plllzzzz help me out.Plzz help me if u can.Thanx in advance.

Hi Andy,
Thanx for responding. The input is from a text file. SDNN, SDANN,etc are the timedomain parameters of heart rate variability.
SDNN: the standard deviation of the NN or RR interval i.e. the square root of variance.
SDANN:the standard deviation of the averageNN interval calculated over short periods, usually 5 min,which is an estimate of the changes in heart rate due tocycles longer than 5 min
SDNN index, the meanof the 5-min standard deviation of the NN intervalcalculated over 24 h,
RMSSD: the square root ofthe mean squared differences of successive NN intervals
NN50: the number of interval differences of successiveNN intervals greater than 50 ms, and
pNN50 the proportionderived by dividing NN50 by the total numberof NN intervals.
The problem is dat I am a fresher to the world of Labview. I have jus recently started working on it. Can u please suggest me some some idea as soon as possible.
As i said I have the ECG data in the form of text files..I need to create sort of GUI to calculate the time domain parmeters....I need help urgently. Plzzz help me if u can. If u have and .vi example to calculate the RR interval plzz send it to me ASAP.
Thanku

Need HELP regarding installinfg CR2008/Visual Advantage

I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

Hi Shamish
Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
Best regards
Michael

Need Help Regarding Enabling The Matrix

Hi All,
We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
Regards,
Jayanth

Hey first bind the columns of matrix to any user datasource
and then you can enter any thing into your matrix
following code may help
suppose you have one column
oForm = SBO_Application.Forms.Item("URFRM")
oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
oMatrix=oForm.Item("URMATRX")
oMatrix = oItem.Specific
oColumns = oMatrix.Columns
oColumn = oColumns.Item("URCOLName")
oColumn.DataBind.SetBound(True, "", "URDSName")
oMatrix.Addrow()
hope this will help
additionally you can look at this sample
.....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

Need Help Regarding JAVA BEAN

Is any one tell me that JAVA BEAN only used in WEB or also you in Desktop applications???? and aslo tell how i implement Java class and use JAVA BEAN. I need help regarding above matter
thanks in advance
Rehan MIrza

Here is a good link that indicate that JavaBean is not only for applets
http://java.sun.com/docs/books/tutorial/javabeans/whatis/beanDefinition.html
quote:
The JavaBeans API makes it possible to write component software in the Java programming language. Components are self-contained, reusable software units that can be visually composed into composite components, applets, applications, and servlets using visual application builder tools. JavaBean components are known as Beans.
Francois

I need help regarding setting my mail accounts on macbook pro

I need help regarding resetting my mail accounts on macbook pro

What kind of accounts do you need to reset? IMAP or POP accounts using one of the many web-based messaging systems? An Exchange server account? Were they working and now just not working any longer?
You're going to have to be a little more specific in what you need...
Clinton

I need help regarding installation of Netweaver 2004s

Hi,
I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
" SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport    : 21212
guistart   : true
command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
guiengine: login in process...............................
guiengine: login timeout; the client was unable to establish a valid connection
Exit status of child: 1"
Regards,
Farooq Shaik.

Hi
Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

Need Help Regarding ibook

em user of   iphone 3gs os 6.1.6
Yesterday i restore ma iphone
after that em Unable to   install    ibook in ma iphone its say me that u need os 7 ...
need help regarding this issue....   what i do is there any alternative app ...?

Hey Seungly,
I've realized that my computer runs fine UNLESS I turn the AirPort on to connect to the Internet. The moment I click "Turn AirPort On," the "You need to restart your computer" screen immediately pops up. Is there any connection between AirPort and my problem?
That could very easily be the case, a bad Airport card. Look at this recent post:
http://discussions.apple.com/thread.jspa?messageID=7960754&#7960754
John diagnosed it from the panic log.
Does yours say something similar?
Richard

Need help regarding image scanning from scanner and resizing it...

Hi,
I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!
Thanks,
Avinash.
Edited by: Kalakonda on Jul 24, 2009 8:08 AM

Kalakonda wrote:
I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!So what you are doing is you have a Scanner (hardware: like an HP flatbed scanner) attached to a server that you want to use as a scanning station? Is this the senario that you are talking about?

Need help regarding may ipad, i cant access my ipad, need help regarding may ipad, i cant access my ipad

need help regarding may ipad, i cant access my ipad, need help regarding may ipad, i cant access my ipad

Can you be little more specific?

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
Tiaan

Greetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario

Experts plz help me short dump

hi experts
plz help me
in ecc 6.0 gettin a short dump
THANKS IN ADVANCE
error is ::
For the statement
       "TRANSFER f TO ..."
    only character-type data objects are supported at the argument position
    "f".
    In this case. the operand "f" has the non-character-type "T_LINE". The
    current program is a Unicode program. In the Unicode context, the type
    'X' or structures containing not only character-type components are
    regarded as non-character-type.
and it is coming in line::
LOOP AT v_tab.
TRANSFER v_tab TO p_file. "<b>this line contains error</b>
ENDLOOP.
FYI::
TYPES: BEGIN OF t_line,
       pspid(9) TYPE c,
       tab1 TYPE x,
       post1 TYPE proj-post1,
       tab2 TYPE x,
       vernr TYPE prps-vernr,
       tab3 TYPE x,
       astnr TYPE prps-astnr,
       tab4 TYPE x,
       usr00(12) TYPE c,
       tab5 TYPE x,
END OF t_line.
PARAMETERS: p_file LIKE rlgrap-filename OBLIGATORY.         "DMA20040510
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
QUESTION:::
CAN WE USE FEILD SYMBOL IN IT
LIKE TRANSFER <Fs> TO P_FILE.

Hi,
    LOOP AT v_tab ASSIGNING <in>.
    p_file = <in>.
    ENDLOOP.
Best regards,
Prashant

Query regarding short dump

Hi
The runtime error is DBIF_RSQL_INVALID_RSQL and the exception is CX_SY_OPEN_SQL_DB.can anyone explain me these errors.
At this select query it going to short dump.Could anyone help me.Its urgent.
Select aaufnr agstrp agsuzp biedd b~iedz into table i_uncount
from afko as a inner join afru as b on aaufnr = baufnr
for all entries in i_ordscp
where aaufnr = i_ordscp-aufnr and bgrund = 'ONS'
and b~stzhl = '0000000'.
Error Analysis:
The data read during a SELECT access could not be inserted into the target field.
Either the conversion is not supported for the target field's type or the target field is too short to accept the value or the data are not in a form that the target field can accept.
The target field is all correct.I've checked it.
Could anyone please help me.Its really urgent.U'll definitely be given points.
Thanks
chandrika.

Hi Sarath ,
Please look at the internal table decleration and the sequence of fields in select statement .
What is happening is that the select is tying to place the value of iedd into aufpl as a result of which this incompatibilty occurs.
So you can either user into corresponding-fields or modify the sequence of your internal table.
I would sugges the second option , as first can effect the performance.
So just declare the it as
TYPES:BEGIN OF t_uncont,
aufnr like afko-aufnr,
gstrp like afko-gstrp,
gsuzp like afko-gsuzp,
iedd like afru-iedd,
iedz like afru-iedz,
aufpl like afko-aufpl,
END OF t_uncont.
Regards
Arun

Need help regarding Java decoding of IMAP attachment (IOStream related ques

Hi ,
I need some help regarding the processing of an IMAP attachment , It is a basic IOStream related question I guess.
I have some attachment to a mail , I try to fetch it using javamail and read the content and write it to a file , I was able to do it successfully when I was using stream.read( tempBuffer) function but when I started using stream.read( tempBuffer, 0, m_maxDataSize ); it is giving me following exception
java.io.IOException: Error in encoded stream: needed at least 2 valid base64 characters, but only got 1 before padding character (=), the 10 most recent characters were: "/59PT/eXQ="
     at com.sun.mail.util.BASE64DecoderStream.decode(BASE64DecoderStream.java:259)
     at com.sun.mail.util.BASE64DecoderStream.read(BASE64DecoderStream.java:148)
***Here is the snippet of code that is running this:***
m_contentObj = m_message.getContent();
if(m_contentObj instanceof InputStream)
     System.out.println(" Content is type of InputStream");
     InputStream stream = (InputStream) m_contentObj;
     byte[] tempBuffer = new byte[m_maxDataSize];
     stream.skip( m_currPos );
     int bytesRead=stream.read( tempBuffer, 0, m_maxDataSize );
     System.out.println(" Read the following no of bytes from the Object::"+bytesRead);
     m_currPos+=     bytesRead;
Please suggest what to do.
Thanks & Regards
Saurabh

BUMP, just incase its been missed by a new board member

Need help regarding short dumps in BW

Similar Messages

Maybe you are looking for