Need help regarding the few clarification in writing cmod

Hi All,
I need to write a cmod by creating a new project for that. The main purpose is to define variables in it which will be used in reporting(restrictions).
Now I need to enhance that structure with RSR00001 code since it dealys with declaring the variables.
But this enhancement code is being used in some other project as well, because of it I am unable to use it in my project..
Can you please explain me how can I overcome this situation.
Thanks,
vinay.

Hi Vinay,
Write this code in CMOD :
data:
z_include type program,
Z_return.
when others.
* Select the include program using the variable
    perform select_include using    i_vnam
                           changing z_include
                                    z_return.
    check z_return = 0.
* Check that include program exists
    perform check_include_program using    z_include
                                  changing z_return.
    check z_return = 0.
* Process the appropriate variable by calling the generic form
* 'PROCESS_VARIABLE' in the include program just selected
    perform process_variable in program (z_include)
                             tables   e_t_range
                                      i_t_var_range
                             using    i_vnam
                                      i_vartyp
                                      i_iobjnm
                                      i_s_cob_pro
                                      i_s_rkb1d
                                      i_periv
                                      i_step
                                      lv_zs_bsw_offset
                             changing e_meeht
                                      e_mefac
                                      e_waers
                                      e_whfac
                                      c_s_customer.
FORM select_include using    p_var
                     changing p_include
                              p_error.
select single zinclude
    into p_include
    from zvariables
    where zvarname = p_var.
p_error = sy-subrc.
ENDFORM.
form check_include_program using    p_include
                            changing p_error.
data:
    l_name type programm.
select single name
    into l_name
    from trdir
    where name = p_include.
p_error = sy-subrc.
endform.
Then you can create a table having two column, variable value and its corresponding program.
You will then not need to disturb the CMOD Code.
-Vikram

Similar Messages

Need help regarding the location of Exchange 2013 Logs for parsing

Hi, I am trying to create reports based on the logs that are created on my exchange server. I am using
exchange 2013. My problem is that I cannot handle every log, and instead want specific types of logs.
I need help finding the specific locations of the following types of logs (If they even exist), so that I can parse them and use them effectively:
Audit Logs (Mailbox logons, Mailbox permission changes, Mailbox property changes,
Exchange store changes)
Mail Report Logs (Mailbox size and growth, Mailbox storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes)
Exchange Traffic Reports (Details on size and amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users)
I understand this might sound like a huge undertaking, but any help that can be provided would be appreciated.
Again, I need information on the locations of these types of logs on the exchange server, so that I can parse them. Collecting them all and searching through them is not practical for my available resources.
Thanks,
Matt

Audit Logs (Mailbox logons, Mailbox permission
changes, Mailbox property changes, Exchange
store changes) ---- these are two type of logs, 1. mailbox audit logs and that is stored in each mailbox under dumpster
http://technet.microsoft.com/en-us/library/ff461930(v=exchg.150).aspx however you need to
enable
it for individual mailboxes... 2. admin audit log, this is stored into a system mailbox dumpster.... http://technet.microsoft.com/en-us/library/dd335052(v=exchg.141).aspx
Mail Report Logs (Mailbox size and growth, Mailbox
storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes) ---- there isn't any specific log for this, you would need to create some time of script to collect this every day for you and store it somewhere... This is a good start... http://www.stevieg.org/2011/06/exchange-environment-report/
Exchange Traffic Reports (Details on size and
amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users) ----- This you can get from message tracking log... http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx

Need help regarding the dunning form

Hi,
I have to display all the sales and payments of a cusomter for all the periods that are older than the run date in a dunning form. (i.e) if the run date is 04-aug-05 and if the slaes are there in 3 months(april, May, july) then i have to display three line items with sales and payments for that corresponding three months in the line items. As this is a dunning form i cannot change the print program. any table which have all the sales for a period which i can access directly in the script. can anyone suggest how to handle this.
regards,
Asha

Hi,
You can call a subroutine within a program (your z program)
/:   PERFORM ADD_AMOUNT IN PROGRAM SAPLZFTP_F150
/:           USING &W_AMOUNT&
/:   ENDPERFORM
In the z program create this subroutine.
      Form ADD_AMOUNT
     -->FT_INVAR Text Symbol table for input variables
     -->FT_OUTVAR Text Symbol table for output variables
FORM add_amount TABLES ft_invar   STRUCTURE itcsy
                       ft_outvar STRUCTURE itcsy.
STATICS:
    w_value_l    TYPE f150d-salfw.
        READ TABLE ft_invar INDEX 1.
        IF sy-subrc IS INITIAL.
you can check all this part of the code how you want to
process your data whether its numeric or character or
whatever
           w_value_l = w_value_l + ft_invar-value.
        ENDIF. "IF sy-subrc IS INITIAL.
ENDFORM.                    " ADD_AMOUNT
TO BESPOKE THE PRINT PROGRAM FOR THE DUNNING
Dunning outputs use the function module FI_DUNNING_PRINT_NOTICE. You can copy this to a Z function module and make some changes to the data selection. You will have to look into the code and decide what changes you need.
The process to use a bespoke program to do the dunning print is as follows:
UNDER FI GLOBAL SETTINGS in the configuration,
There are Business Transaction Events. Within that you can configure the same to enable a Z function module in place of the standard function module (from the FUNCTION GROUP F150)
Create function group ZFTP_F150
Copy standard function module FI_PRINT_DUNNING_NOTICE of function group F150 to ZFTP_FI_PRINT_DUNNING_NOTICE in function group ZFTP_F150
Copy standard function module PRINT_DUNNING_NOTICE of function group F150 to ZFTP_PRINT_DUNNING_NOTICE in function group ZFTP_F150
Within the function module ZFTP_FI_PRINT_DUNNING_NOTICE, change function module call for PRINT_DUNNING_NOTICE to ZFTP_PRINT_DUNNING_NOTICE
Create a new include ZFTPI_ROUTINES within the function group and copy the subroutines LOG_MSG, LOG_MSG_TAB, & LOG_SYMSG from the function group F150 to this include
AS AN ALTERNATE, YOU CAN COPY THE WHOLE FUNCTION GROUP
Maintenance view TBE31 (SM30). Change the function module from FI_PRINT_DUNNING_NOTICE to ZFTP_FI_PRINT_DUNNING_NOTICE against the event 00001720 FI-FI entry
Hope this helps.
regards,
Satya

Need help regarding the maximum limit for data type

Hi,
this is Sravan. for my application am inserting the bulk data in XML format into a column of Database table.
the sample inserted XML data will be in format... like
'<ACC count = "10">
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
</ACC>'
this data in XML can have more than 1000 accounts.
now, i need to take a Parameter value from XML node and write into a file. for this i have written a procedure by looping the Nodes from XML data and building Dynamic Query like..
if nvl(v_int, 0) > 0 then
v_sql := '';
     for v_count in 1..v_int
     loop
     if v_sql is null then
          v_sql := 'select extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@ac_no'')||extractvalue(empdetails, ''/ACC/Acc' || v_count
||'/@cn_nr'')||extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@eflag'') string from sample1';
     elsif v_sql is not null then
               v_sql := v_sql || ' union all select extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@ac_no'')||extractvalue(empdetails, ''/ACC/Acc' || v_count
||'/@cn_nr'')||extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@eflag'') string from sample1';
          end if;
     end loop;
end if;
i will get this variable "v_int" from <ACC count = "10"> ACC count Attribute, here 10 is the value for v_int variable but in real time the variable value can be more than 1000.
at the time of Building Dynamic Query I make using the Variable v_SQL which is of Data Type "Long",
this variable stores dynamic query which is build at the time of executing procedure but this v_sql Variable is throughing Exception that ....
"numeric or value error Character String Buffer is Too Small"... but Long Data type will store upto 2GB..
this variable cant able to hold much data which is dynamically build.
will you please help me to resolve this issue Or will u suggest me another method to pick the data from XML column.
thanks,
sravan.

user11176969 wrote:
i changed the code, now its working fine.
direct assigning the dynamic query to a Clob variable raised error.
for dynamic query building i used another variable and assigned this variable value to actual query variable.Nice!

Need Help regarding the JVM for the ARM926EJS Processor

I Want to develop an application in java for the IMX.27 board which has ARM926EJS Procesor. This processor is jazelle enabled hardware.
My questiion is that how to get the JVM for this. So that i will use my Java appliaction. I am using linux OS.
Thanks in advance.

Hi Narendra,
Sun actually has a VM for the ARM ... well, actually 2 VMs for the ARM. Depending on your needs, there's a solution for JavaME CLDC, JavaME CDC, or JavaSE. There's also the open source implementations for CLDC and CDC. Here's how to get more info:
JavaME: http://java.sun.com/javame/index.jsp
CLDC open source project: phoneME Feature: https://phoneme.dev.java.net/content/phoneme_platforms.html#phonemefeature
CDC open source project: phoneME Advanced: https://phoneme.dev.java.net/content/phoneme_platforms.html#phonemeadvanced
Embedded SE: http://java.sun.com/j2se/embedded/offerings.html
email inquiry to: [email protected]
Regards,
Mark

I need help regarding the Acrobat XI standard edition

In fact I am using the X pro and i need to know about some features in XI standard

Hi BSaadeh,
Let me know your question about Acrobat.
Regards,
Ajlan Huda.

Need Help Regarding Enabling The Matrix

Hi All,
We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
Regards,
Jayanth

Hey first bind the columns of matrix to any user datasource
and then you can enter any thing into your matrix
following code may help
suppose you have one column
oForm = SBO_Application.Forms.Item("URFRM")
oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
oMatrix=oForm.Item("URMATRX")
oMatrix = oItem.Specific
oColumns = oMatrix.Columns
oColumn = oColumns.Item("URCOLName")
oColumn.DataBind.SetBound(True, "", "URDSName")
oMatrix.Addrow()
hope this will help
additionally you can look at this sample
.....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
Tiaan

Greetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario

Need help on the below query.

Hi All,
I've a query given below..
SELECT W.WONUM,
     W.STATUS,
     WS.CHANGEDATE,
     EH.OLD_RATE
     FROM
     WORKORDER W,
     WOSTATUS WS,
     ESTIMATE_HEADER@GQMFOF EH
WHERE WS.CHANGEDATE BETWEEN '01-Oct-2009' AND '1-Nov-2009'
AND W.WONUM = WS.WONUM
AND EH.OLD_RATE = 'N'
AND WS.WOSTATUS = 'CLOSE';
I would like to get All the data which status =closed in the month of Oct for Old rate,
So for this i am writing the query above. But not getting the o/p.
It is giving me that " Table/View doesn't exist.
There 2 schemas MAXIMO,GQMMGR..
DBlinks are GQMFOF,MAXFOFNC..
Can anyone help me while writing the above query...
Regards,
gr.

A question was asked in your other thread. But the problem was you dint care to give an answer.
Dont open duplicate post.
I need help on the below problem..

Need help regarding Java decoding of IMAP attachment (IOStream related ques

Hi ,
I need some help regarding the processing of an IMAP attachment , It is a basic IOStream related question I guess.
I have some attachment to a mail , I try to fetch it using javamail and read the content and write it to a file , I was able to do it successfully when I was using stream.read( tempBuffer) function but when I started using stream.read( tempBuffer, 0, m_maxDataSize ); it is giving me following exception
java.io.IOException: Error in encoded stream: needed at least 2 valid base64 characters, but only got 1 before padding character (=), the 10 most recent characters were: "/59PT/eXQ="
     at com.sun.mail.util.BASE64DecoderStream.decode(BASE64DecoderStream.java:259)
     at com.sun.mail.util.BASE64DecoderStream.read(BASE64DecoderStream.java:148)
***Here is the snippet of code that is running this:***
m_contentObj = m_message.getContent();
if(m_contentObj instanceof InputStream)
     System.out.println(" Content is type of InputStream");
     InputStream stream = (InputStream) m_contentObj;
     byte[] tempBuffer = new byte[m_maxDataSize];
     stream.skip( m_currPos );
     int bytesRead=stream.read( tempBuffer, 0, m_maxDataSize );
     System.out.println(" Read the following no of bytes from the Object::"+bytesRead);
     m_currPos+=     bytesRead;
Please suggest what to do.
Thanks & Regards
Saurabh

BUMP, just incase its been missed by a new board member

I have a godaddy website with a welcome page- I need help adding a few additional pages with a hyperlink to my welcome page.

I need help attaching a few hyperlinks my godaddy welcome page. I have 2 more ipages articles, I also converted them to pdf. Godaddy only helped (last year) with the 1st article. I do not know how to attach a hyperlink to the artlcles and add the hyperlinks to my welcome page.

The program is called Pages not iPages. Just let us know if you do not speak English and what language you do speak so we can adjust for that.
The issues are to do with your web page not with Pages.
I think you are asking how to link from your web page to your pdf articles. You must first copy those pdfs to your web server, or some other web location, and then provide html links on your welcome page to those pdf files.
The pdfs themselves may contain links to other locations but I can not see that that is what you are asking for.
Nor to what those links would be to.
From your heading I think you may have confused the name of Pages, the word processing program, with web pages which are two different things.
Peter

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

I need information regarding the creation of Workbook and WAD.

Hi,
I need information regarding the How to create the Workbook and WAD.
Can any one help me to get the information..
Regards,
Suman
Edited by: Suman Reddy Vuyyuru on May 19, 2009 8:22 AM

Hi,
for workbook:
[Queries in Workbook|http://help.sap.com/saphelp_sem40bw/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
for WAD:
[WAD for Beginners|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22]
thnks.

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. Please help!

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto. I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken. I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported. I greatly appreciate some assistance!

All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
Regards
TD

Need help for the $200 promo rebate for trade-in of I Phone 4

Need help for the $200 promo rebate for trade-in of I Phone 4. Unable to preregister when I ordered the new 6 in September. Now can not contact VZW recycle program regarding.

When I ordered my phone on Sept. 13th in a Verizon store, I had to ask the salesman how I went about getting the $200 rebate. He said shipping materials would come with the new phones. When I received the confirmation e-mail of my order, it contained a link for the rebate. Fortunately I clicked on the link, filled out the form online, and received the packing materials to send my phone in shortly after. My phones came in on Oct. 14th and I sent 3 of them back. So far I have received a gift card for $200 for 2 of the phones; the other is showing not received. I don't know what your situation is, but I think the promotion ended Oct. 15th. If I had listened to the salesman I think I would be out of luck as well. I hope I am wrong for your sake.

Need help regarding the few clarification in writing cmod

Similar Messages

Maybe you are looking for