Need help regarding to Web server

Hello, I need some help about web server. I'm really really bad when it comes into server because I dont have any experience about this. I'm actually developing project under university, where I have to create a website for them. Since they have just bought a new server, they want me to install and configure the server to assure I can run my program on it, which means I have to make it as a web server. I dont have any idea how to configure it, what I need and so on. Furthermore, how can I configure dreamweaver to make sure that our website can be uploaded into Internet later?

I think you may be in for a bit of hard work and possible complications if you have no idea on how to set up a server. It would be more realistic, especially for security purposes for an IT person who is knowledgeable in servers to set it up for the university - seriously!
Anyways, I suppose it all depends on the type of server, is it a windows based server or will it be linux??
I did a google search for 'configuring a server' and came up with these links:
http://www.google.com.au/search?q=configuring+a+server&ie=utf-8&oe=utf-8&aq=t&rls=org.mozi lla:en-GB:official&client=firefox-a
As you can see, lots of information, but it depends on the type of server.
Once the server is set up, you would have information on how to upload the site to the server (same as any webhost) and you use those details to enter into the Remote site window.
I'm afraid I'm not familar with setting up servers, so that's the best help I can offer :-)
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

Similar Messages

Need help setting up web server with WRT54GS

Hello,
I am trying to set up a web server with my linksys router. For the network settings, I have used 192.168.001.150 as my primary IP (192.168.1.150, all 3 numerical characters have to be filled in), 255.255.255.000 as my primary netmask and 192.168.001.001 (192.168.1.1) as my gateway. I have gone into my router and then enabled port fowarding for port 80 to 192.168.1.150 but I still cannot access my web server. What could be the problem?
Any help would be greatly appreciated. I'm trying to set up this server so I can test scripts and things.

bump

I need help regarding setting my mail accounts on macbook pro

I need help regarding resetting my mail accounts on macbook pro

What kind of accounts do you need to reset? IMAP or POP accounts using one of the many web-based messaging systems? An Exchange server account? Were they working and now just not working any longer?
You're going to have to be a little more specific in what you need...
Clinton

Need help for publishing web intelligence document (universe) into InfoView

Post Author: mirage
CA Forum: Publishing
Hello all,
I need help for publishing web intelligence document (universe) into InfoView.
can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
Can somebody give short instructions how can I do it?
Regards, Slava

If the change between the 2 types of data has to happen dynamically during run time them
1. Use 2 dataproviders
a. Current
b. Historic
2. Merge the 2 dimensions
3. Use Webi variable to switch between the measure of the current and historic universe
Ex if [year] < 2010 then historic.[expense] else current.[expense]
Hope this helps,
Divya

Need help in ALV web dynpro

Hi all,
I need help in the web dynpro ALV.
I have an ALV generated dynamically. On the ALV, there is filter and settings link on the extreme right of the alv header.
How is it possible to get them left align after the export button ?
I want to maitain some gap between the export button, filter and settings.
Please give me inputs.
Thanks in Advance.

Hi Jatra,
I am working on an ALV table in a standard Web Dynpro ABAP application.
The business requirement is to hide the header for the ALV table.
The header has a dropdown to choose u201CStandard Viewu201D and 2 options: Filter and Settings.
The footer for the ALV table containing the Row and Column numbering also needs to be hidden.
I am looking at the IF_SALV_WD_TABLE_SETTINGS to find the relevant methods to hide the header and footer.
Please let me know if I am on the right track and if there is an alternate way to do this through changing the layout of the ALV table. I tried to hide the header and footer manually via the layout but am unable to do so, as the ALV table is just displayed as ViewContainerUI Element.
Please help me as to how to hide the header and footer as I am new to ALV in WDA.
Thanks and Regards.

Need Help Regarding JAVA BEAN

Is any one tell me that JAVA BEAN only used in WEB or also you in Desktop applications???? and aslo tell how i implement Java class and use JAVA BEAN. I need help regarding above matter
thanks in advance
Rehan MIrza

Here is a good link that indicate that JavaBean is not only for applets
http://java.sun.com/docs/books/tutorial/javabeans/whatis/beanDefinition.html
quote:
The JavaBeans API makes it possible to write component software in the Java programming language. Components are self-contained, reusable software units that can be visually composed into composite components, applets, applications, and servlets using visual application builder tools. JavaBean components are known as Beans.
Francois

I need help regarding installation of Netweaver 2004s

Hi,
I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
" SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport    : 21212
guistart   : true
command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
guiengine: login in process...............................
guiengine: login timeout; the client was unable to establish a valid connection
Exit status of child: 1"
Regards,
Farooq Shaik.

Hi
Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

Need help regarding image scanning from scanner and resizing it...

Hi,
I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!
Thanks,
Avinash.
Edited by: Kalakonda on Jul 24, 2009 8:08 AM

Kalakonda wrote:
I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!So what you are doing is you have a Scanner (hardware: like an HP flatbed scanner) attached to a server that you want to use as a scanning station? Is this the senario that you are talking about?

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

Need HELP regarding installinfg CR2008/Visual Advantage

I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

Hi Shamish
Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
Best regards
Michael

Need Help Regarding Enabling The Matrix

Hi All,
We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
Regards,
Jayanth

Hey first bind the columns of matrix to any user datasource
and then you can enter any thing into your matrix
following code may help
suppose you have one column
oForm = SBO_Application.Forms.Item("URFRM")
oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
oMatrix=oForm.Item("URMATRX")
oMatrix = oItem.Specific
oColumns = oMatrix.Columns
oColumn = oColumns.Item("URCOLName")
oColumn.DataBind.SetBound(True, "", "URDSName")
oMatrix.Addrow()
hope this will help
additionally you can look at this sample
.....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

Need Help regarding text Output

Dear gurus.
I need help regarding formatting of a text.
I want to format a employee sub group text.
im getting a text workers (7) from a table t503t having field ptext.
i want to show only (7) in the output not the whole text how can i do this ?
Please help
regards
Saad.Nisar

DATA: BEGIN OF itab_odoe OCCURS 0,
department_text LIKE t527x-orgtx,"Holds the short text for department
department_no LIKE pernr-orgeh,
pernr LIKE pernr-pernr,
ename LIKE pernr-ename,
grade like t503t-ptext,   "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
* department_text LIKE t527x-orgtx,"Holds the short text for department
current_year LIKE sy-datum,
wt0001 LIKE q0008-betrg,"Basic Pay
wt1101 LIKE q0008-betrg," COLA
wt3002 LIKE p0015-betrg,"Overtime
per_basic type p DECIMALS 2,"Overtime percentage on basic
per_basic_sum type p decimals 2,"Overtime Sum Division
overtime_sum LIKE p0015-betrg,"holds sum of overtime
basic_sum like q0008-betrg,"holds sum of basic
END OF itab_odoe.
Im using the select statement to get the employee subgroup from the table
select single ptext
    from t503t
    into itab_odoe-grade
    where persk eq pernr-persk
    AND SPRSL eq 'EN'.
now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
i want to show only the text in Brackets.

I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.

I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.
I am using Labview 8 ... I need to develop a software to accquire the ECG data (simulated enironment ) and compute the time domain parameters of Heart rate variability like "SDNN, SDANN...etc". Can some 1 plllzzzz help me out.Plzz help me if u can.Thanx in advance.

Hi Andy,
Thanx for responding. The input is from a text file. SDNN, SDANN,etc are the timedomain parameters of heart rate variability.
SDNN: the standard deviation of the NN or RR interval i.e. the square root of variance.
SDANN:the standard deviation of the averageNN interval calculated over short periods, usually 5 min,which is an estimate of the changes in heart rate due tocycles longer than 5 min
SDNN index, the meanof the 5-min standard deviation of the NN intervalcalculated over 24 h,
RMSSD: the square root ofthe mean squared differences of successive NN intervals
NN50: the number of interval differences of successiveNN intervals greater than 50 ms, and
pNN50 the proportionderived by dividing NN50 by the total numberof NN intervals.
The problem is dat I am a fresher to the world of Labview. I have jus recently started working on it. Can u please suggest me some some idea as soon as possible.
As i said I have the ECG data in the form of text files..I need to create sort of GUI to calculate the time domain parmeters....I need help urgently. Plzzz help me if u can. If u have and .vi example to calculate the RR interval plzz send it to me ASAP.
Thanku

I need help with the Web Application Certificate

Greets,
The title says it all really. I need help with the Web Application Certificate.
I've followed the instructions from here:
https://www.novell.com/documentation....html#b13qz9rn
I can get as far as item 3.c
3. Getting Your Certificate Officially Signed
C. Select the self-signed certificate, then click File > Certification Request > Import CA Reply.
I can get the certificate in to the Filr appliance but from there I'm stuck.
Any help much appreciated.

Originally Posted by bentinker
Greets,
The title says it all really. I need help with the Web Application Certificate.
I've followed the instructions from here:
https://www.novell.com/documentation....html#b13qz9rn
I can get as far as item 3.c
ok when you have you self signed certificate and you requested an official certificate with the corresponding CSR then you just need to go back to the digital certificates console. To import the official certificate, select the self signed certificate, then click File > Certification Request > Import CA Reply. Then a new windows pops out to select the certificate from your trusted authority from your local hard disk. Find the file (.cer worked for me) and click ok. As soon as you do this in the digital certificates console the self signed certificate will change the information that now it is officially signed. Look at the second column and you should see the name of your trusted authority under "issue from"
I personally had a lot of issues across all platforms. Especially Firefox and Chrome for android. Needed to pack all the root cert, intermediate cert and signed cert into one file and import as CA reply. Not even sure if this is correct now. But at least it works.

Need Help Regarding ibook

em user of   iphone 3gs os 6.1.6
Yesterday i restore ma iphone
after that em Unable to   install    ibook in ma iphone its say me that u need os 7 ...
need help regarding this issue....   what i do is there any alternative app ...?

Hey Seungly,
I've realized that my computer runs fine UNLESS I turn the AirPort on to connect to the Internet. The moment I click "Turn AirPort On," the "You need to restart your computer" screen immediately pops up. Is there any connection between AirPort and my problem?
That could very easily be the case, a bad Airport card. Look at this recent post:
http://discussions.apple.com/thread.jspa?messageID=7960754&#7960754
John diagnosed it from the panic log.
Does yours say something similar?
Richard

Need help regarding to Web server

Similar Messages

Maybe you are looking for