Need help reinstalling driver for my dvd drive

my a205-s5812 cddvd driver isnt working, when i went to device manager to check for the problem, there is a message stating that the driver might be corrupted or missing. so i cant use my dvd drive anymore, how do i fix this problem
Message Edited by GAMBLER_CPT on 03-28-2009 03:08 AM

Satellite A205-S5812
Turns out there is a firmware update to that drive. Maybe it helps.
Toshiba (TSST) TS-L632* DVD Drive Firmware Update
You can reinstall the driver by uninstalling it in Device Manager (devmgmt.msc) and rebooting.
-Jerry

Similar Messages

OS 9 Driver for retrofitted DVD drive

Hello,
I have a dual CPU 533 mhz G4 with OS 10.4.10 installed. It will run classic mode and will also boot from OS 9.2.2, which is still on the hard disk.
The machine has been retrofitted with a "Super Drive," possibly made by Pioneer. It reads and writes CDs and DVDs. "About this computer" won't give me the name of a manufacturer.
The DVD drive works fine in OS X. Classic and OS 9 won't recognize it, though, presumably because OS 9 needs a driver for it.
I want to run an application that won't work unless Classic or OS 9 recognizes the drive and finds the CD mounted on the desktop.
What are my chances of finding a driver for the DVD drive and successfully installing it? How would I identify the right driver if I don't know the manufacturer of the drive?
I thought about making a disk image of the CD, in OS X, then using that in place of the CD in OS 9 or classic. I couldn't figure out how to make an image, though. Disk Utility in OS X doesn't seem to have that ability. I might have an OS 9 utility that could do it, but OS 9 can't see the drive.
Is that likely to succeed? If so, how to do?
Thanks in advance,
Tim

Hey folks,
Sorry about the late reply. I hope it gets noticed, somehow.
"About this Mac" shows the following information about the drive:
ATAPI DVD DD 2X16X4X16:
Model: ATAPI DVD DD 2X16X4X16
Revision: G7Z9
Serial Number: 99B5C1520144445601SP
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
The markings on the front of the drive drawer are strictly generic. I haven't removed it from the case, yet. That's sort of a hassle.
Does this give any clues about how to ID the drive?
Come to think of it, I don't really remember where this drive came from.
Don Archibald wrote that the following items should appear in the OS 9 system folder.
•Extensions Manager -
Apple CD/DVD Driver
•Extensions folder -
Apple Photo Access
Audio CD Access
Foreign File Access
ISO 9660 File Access
UDF Volume Access
All are absent. I guess that would explain the problem.
I'll try to find these files and install them. I'll get back to you if it doesn't work.
Thanks a bunch.
Tim

Need help figuring how to track DVD drive usage

I work at a public library and need to track how often the DVD drives are used by our patrons. Is there some count somewhere of how many times the drive is accessed? The only other way I can think of to do this is to run a script that will check
if any files exist at E:\ and then sleep for 1 minute and check again. Then, create a log in a central location that the script can update if the file exists.
Anyone able to come up with a better idea? I would really appreciate any input.
Thanks
Tamara

Yes, I am a technician. I work at the library that I am attempting to collect this usage info from. I just need to know how often our patrons use the drives because we may not offer the drives in the future and I would like to track a couple
months of usage to determine how this will affect the patrons.
Yes, the PCs are very locked down, but since I am the one that locked them down, I can get the script to run.
Thanks for the info about the event log. I will work on a script to filter those events. Seems like that would give me my answer!
Thanks again for the help!
Tamara

Satellite A200 - Need driver for CD/DVD drive

Hey folks.
Recently installed WXP Pro on my A200 PSAEC laptop, so I'm now dual booting XP and Vista on my laptop.
Problem is, I've got all the drivers working on XP and everything's running perfect, but when I tried to burn a DVD, Nero says the recorder can't burn DVDs. In "My Computer" the drive shows as a DVD-RW drive, but when I insert a blank DVD, it says CD Drive. The drive shows up as "TCSDcor' CD/DVDW TC-L6#2D" in device manager. I've searched around for a driver, but can't find an exact match for that drive and there's no optical drive drivers on this Toshiba site driver section. The only thing I've found is an executable file for upgrading the firmware, but it throws an error saying it's the wrong drive.
Anyone got any ideas?
Any help would be greatly appreciated!

Hi
Toshiba European driver page provides three different firmware updates for Satellite A200 PSAEC series:
TO02 for CD/DVD drive TS-L632
TO02 - for CD/DVD drive TS-L632P
(This firmware solves some problems of the optical disc drive.)
TO03 - for CD/DVD drive TS-L632H
(This firmware solves some problems of the optical disc drive.)
Im not quite sure what TO0$ means but I think the sign $ is only a free variable parameter (place marker).
If you want to check your current firmware then you could check it using the Nero Info Tool
http://www.nero.com/enu/support-nero8-tools-utilities.html

I need help reinstalling office for my iMac

I need to reinstall Office 2011 for my iMac. I downloaded it off the web and do not have the email that has the product key. I have found out how to uninstall it, but need to know how to reinstall it.
Thank you

Since Office is not an Apple product, contact MS support or post your question on the MS Mac forums, as this forum is for troubleshooting apple software update for Windows, and not related to MS Office in any way. The MS Mac forums are where the Mac Office gurus hang out.
http://answers.microsoft.com/en-us/mac

Need help installing Snow Leopard without DVD drive

Hi all,
I posted this question under MacBook Pro but didn't get much help.
I have a MacBook Pro running 10.4.11. I bought the 10.6.3 Snow Leopard Install DVD from Apple but my DVD reader just keeps ejecting it, optical drive must have died.
My roomate has a Windows 7 laptop, and I see here that I can put my DVD into his DVD player, and remote it over our wireless and install it to my laptop.
I've run through the instructions but I can't see Remote Disc under the Mac's finder.
I found another article with similar instructions that included some console code. I've made sure to run the following commands in my Mac console too but no luck:
defaults write com.apple.NetworkBrowser EnableODiskBrowsing -bool true
defaults write com.apple.NetworkBrowser ODSSupported -bool true
Is it possible to even do a remote install via one Windows 7 Laptop and my MacBook Pro with no optical drive? Do I have some other kind of options to get this upgrade working?
Any and all help will be appreciated!

That's actally a pretty good and cost effective way to do it. I see some from Walmart for like $30, and it's possible to refund them if it doesn't work.
Thank you

Satellite 5200 - Need master/slave patch for new DVD drive

I need a patch for DVD to use in a Satellite 5200.
My original DVD is broken, so i bought a Toshiba SD-C2512 DVD but it is not working inside the Satellite, but with adaptor at my Desktop PC.
I have to patch the DVD to Master.
Where can I get the file and prog to patch?

Hi
I think such patches that you mean are not available and as far as I know if you can switch a notebook from Master to Slave for example there is a jumper on the drive.
However, for me it sounds like that the drive is not compatible with this notebook. Not every drive is compatible with every notebook (e. g. pin assignment, ) ;)
You should buy another one and check the user manual. There you should find a list of compatible drives.
Bye

Unable to alternate internal DVD RW drive for external DVD driv

Hi,
Please call me Yogie.
I have a G4 computer issue.
I have a Mac computer (G4-500mhz dual) with a Pioneer super drive. It has failed, to the point where it won't read dvd's. I've purchased an external dvd-cd burner (lacie) and when I want to record photos from Idvd, the Pioneer super drive tray will open for dvd insertion, but doesn't recognize the dvd. I need to override the Pioneer superdrive, so I can use the Lacie dvd rw drive. How can I do that ?
Thanks

Hi Yogie:
Welcome to discussions!
How is that LaCie drive formatted? You must use HFS+ to store iMovie files, not FAT32(DOS) or Unix.
Connect the external drive and then launch Disk Utility (Applications/Utilities). You'll see your external drive in Disk Utility's side bar; select it and then click the Erase tab at the top. From the Volume Format menu select which type of formatting you want (most likely Mac OS Extended-Journaled) and then click the oval Erase button at the lower right.
Sue

I need an update for my DVD Drive HP & not rely on Microsoft

I am having a HP DVD problem & i tend to disagree if ya say that my DVD drive (HP DVD RW AD-7586H) needs replacing. My dvd drive works when it wants to (Has a mind of its own). The latest update for my DVD Drive is 21/06/2006 (7+ year old way out of date driver). Ive uninstalled my DVD Drive & re-installed after bootup & that didnt do nothing & i have used quite a few programs to update my driver (Driverbooster, DriverScanner etc) & there is never, ever an update for my DVD Drive via DriverBooster, DriverScanner or my HP Suppoort Assistant. EVER. If HP can give me a BIOS update, why dont you send me a DVD Drive update via me HP Support Assistant HP???? Well i think its a bout time HP should create an update to fix all DVD problems instead of relying on Microsoft to fix it. If my DVD Drive was Windows well i'd use the microsoft Fixits, but considering its a HP DVD drive , i think HP should fix the problem, not Microsoft.
This question was solved.
View Solution.

What you see in divice manager is the control driver for the dvd drive, what you are really needing to look at is the firmware version on your dvd drive & see if a newer firmware is available.
Generally a lot of faults even intermitant ones are more hardware than firmware, drives are very cheap though & a 2 minute job to replace if needed plus you can source a better quality drive & spec as desired.
i think KH21 is newest firmware for that dvd drive.
Like my post? Click Kudos (thumb+) to show appreciation.

Unable to burn cds. Have run diognostics. i tunes not running in safe mode. invalid lower filters registry value. Failed while scanning for CD/DVD drives, error 2500. Please help.

Unable to burn CDs using i tunes. Have run diognostics.    Summary:-   i tunes not running in safe mode.
                                                                                                                                    Invalid lower filters registry value.
                                                                                                                                    Failed while scanning for CD/DVD drives, error 2500
Please help.

That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Message "Unable to find nigpib.inf You need to reinstall the NI-488.2 driver

I get the Message "Unable to find nigpib.inf You need to reinstall the NI-488.2 driver software" before the Getting Started Wizard starts. I cannot find this file on the NI provided CD labeled NI-488.2 for windows version 2.2. Help.

First, what GPIB hardware (part number and serial number) are you trying to install, and what is the operating system?
Next, please go to Measurement & Automation Explorer (MAX) Help to generate reports from the System Information and Support Section. Please post the operating system and NI Software info.
Also, please describe the state of your machine before the NI-488.2 installation, and how you progressed through it before reaching the error. For instance, I installed LabVIEW 7.1 and all the default settings of the Device Driver CD, and then installed .... The MAX report and this will help determine how the system got into its state. If you got any errors during the process of installation, please describe in as much detail as you can.
Based o
n the information above, I may have other suggestions about how to resolve this problem, but you may try the following first: Go to Add/Remove Programs and choose to Reinstall the NI-488.2 driver in the National Instruments Software section. Reboot, and try to run the Getting Started Wizard again.

Read this for CD/DVD Drive with burning, missing drives, not seeing discs

Seeing lots of the same posts with the same solutions being applied (mostly upper/lower control filters/MS Fixit)... so I thought I'd put this up for everyone.
*Update* If this helps, please click the kudos to the right as I'm trying to gauge how effective this is. If you have the time to help the community, please reply stating what did or did not work.
There are some helpful HP support articles that you may want to try before posting:
If your drive cannot burn discs... or you can burn CDs but not DVDs (or vise/versa)... read this...
Drive Cannot Write to Writable Discs (Windows 7)
Drive Cannot Write to Writable Discs (Windows Vista)
Drive Cannot Write to Writable Discs (Windows 98, ME, XP)
Summary:
1) Try different discs! Cheap discs can be hit or miss. Find a disc brand and type that works best.
2) Try burning at a slower speed (not the best option, but can often get the job done if the laser is fading).
3) Remove drive from Device Manager and remove upper/lower filters (see below).
4) Use MS System Restore to go back to a time when it was working.
5) Use PC-Doctor/HP Hardware Diagnostic software to check for a bad drive.
6) If the drive is not bad - save your files and use HP Recovery to put the system back to the beginning.
If your drive cannot read discs; CDs or DVDs or both...
Drive Cannot Read Discs in Windows 7
Drive Cannot Read Discs in Windows Vista
Drive Cannot Read Discs in Windows 98, ME, and XP
Summary:
{restart the PC at least once to see if the drive shows up on boot}
1) See if the drive is listed in Device Manager (look for problems if it is).
2) Check autoplay (skip if you don't use).
3) Make sure a bad disc isn't knocking out the drive (an operating system mounts discs as drives and things can get screwed up).
4) Try reading the disc from a command prompt environment (outside of Windows).
5) Reinstall drive from Device Manager (if drive is listed). {I'd replace this with bigger process of remove upper/lower filters (see below)}.
6) Use MS System Restore to go back to a time when it was working.
7) Use PC-Doctor/HP Hardware Diagnostic software to check for a bad drive.
CD/DVD drive is missing (not in Windows Explorer or My Computer or in burning software)...
CD/DVD Drive is not Detected (Windows 7)
CD/DVD Drive is not Detected (Windows Vista)
CD or DVD Drive is not Detected (Windows 98, ME, or XP)
Summary:
1) See if the drive is listed in Device Manager (troubleshoot based on what you see).
2) Reset Power: Unplug power cord, press Power button for 10 seconds.
3) Check power and data cables attached to the drive and look in the BIOS for the drive name.
4) Remove upper/lower filters (see below).
5) Reinstall burning software
6) Get and CD/DVD drive firmware updates if available (to prevent missing drives in the future (I assume)).
7) Use MS System Restore to go back to a time when it was working.
Stuck Drawer...
Opening a Stuck CD or DVD Drive Tray
Summary:
1) Press eject button on case, on drive, button on keyboard (if exists).
2) Right-click drive icon in Windows and select Eject.
3) Turn off PC and inert a straightened paper clip into the manual release hole on the drive.
4) Check the power cord on the back of the drive.
MS FIXit, Resetting Upper and lower Filters (XP, Vista and 7)
First... try to use the MS Fixit (for Vista) if you are on the computer having the problem)...
Microsoft Fix it Solution
Otherwise, here are the manual steps (overview):
1) Uninstall the CD/DVD drive in Device Manager and DO NOT RESTART the computer.
2) Uninstall your CD burning software (make sure you have the installation disc or you can resinstall from Start, Programs, PC Help and Tools, Recovery Manager (or Driver/Application Recovery). If you don't have the installation discs, skip this step - it might still work).
3) Open the registry editor (Start -> Run -> enter Regedit) ... might want to make a backup of the registry at this point.
4) Open the following keys:
+ HKEY_LOCAL_MACHINE
+ SYSTEM
+ CurrentControlSet (or the current control set with lowest number if that is all that is listed)
+ Control
+ Class
5) Select 4D36E965-E325-11CE-BFC1-08002BE10318. It has to be this exact key - make sure you can see the last numbers!!!
6) Delete the UpperFilter and or the LowerFilters value in the right window if either exists.
7) RESTART the computer - this step is important. Wait for Windows to find and install the CD/DVD drive you removed earlier.
8) Reinstall your burning software and restart the computer again.
Message Edited by GarenT on 10-07-2009 06:32 PM
Message Edited by RasterBlaster on 11-30-2009 03:51 PM
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Mac Mini Server (mid 2011): after erasing both drives, do I need to reinstall OS X on both drives or just one?

After purchasing a new mac mini, I am selling the mid 2011 server. I am not sure if I need to reinstall Yosemite on both hard drives (I have erased both drives). I assume I need to but I thought I read that I don't and have not been able to find that article again. The manuals available are only for the earlier mac mini server or my year, mid 2011, the "regular" mac mini.

You should NOT install Yosemite on your 2011 model. That model DID NOT come preinstalled with OS X Yosemite. If you do you're using YOUR Apple ID not the buyer's.
Before you sell your 2011 Mac Mini you need to install the original OS that the Mac shipped with. If it came preinstalled with OS X Lion or Mountain Lion, you can use Internet Recovery (Command+Option+R) which will boot into Apple's servers and verify the Mac and allow it's preinstalled OS to be reinstalled. Here is a link that should help you prepare it for resale.

Failed while scanning for CD/DVD drives, error 2355

Failed while scanning for CD / DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
As far as I know I do NOT have a virtual drive on this pc.
Any help???

Failed while scanning for CD / DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
As far as I know I do NOT have a virtual drive on this pc.
Any help???

Need help reinstalling my cd/dvd-rom

Some how I deleted my cd/dvd-rom. I can't play cd's or movies. I have not found the software to reinstall my driver. My laptop is p105-6114 with windows xp. I did not get a disk when I bought it.

You can reinstall your OS.
or
you can try :
go to support.micorosft.com
search the article ID : 314060
Article: This You can no longer access the CD drive or the DVD drive, or you receive an error message after you remove a CD recording program or a DVD recording program in Windows XP: "error code 31"

Need help reinstalling driver for my dvd drive

Similar Messages

Maybe you are looking for