Need help, replaced motherboard in my computer.

Im running windows vista home premium.
I recently got a new hard drive and I just synced my ipod and it erased every song that I have bought from itunes thinking that I am on a different computer.
How can I fix this?

You should have deauthorized it before you replaced the mother board and authorized it after you replaced it. No worries though.
Play one of the songs in iTunes.
This will authorize the computer. The songs should then load okay.
See this -> http://docs.info.apple.com/article.html?artnum=93014

Similar Messages

Need help replacing a file in AE

Ok, here is my problem, I made a project on another computer and then I transfered to my computer. I dragged all of the images and sounds but ONE very important image. I downloaded that same image from online and I need help replacing the corrupted old image with the new one. Here is a picture with more detail.
I tried copy & pasting the layer properties and effects, but that didn't work. Any ideas?
Thanks,
Emal

For instructions on swapping out a footage item's source file, "Replace layer source with reference to another footage item".

I need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

i need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

Here is how to do it yourself.
http://www.youtube.com/watch?v=2h53otOBTsI
Here is how to send it to apple.
http://www.apple.com/support/ipod/service/battery/
Hope this helps!

Need help coping project from one computer to another.

I need help coping project from one computer to another. I loaded all video on computer 1, copied events and project folder to computer 2. I was told I only needed to copy the project folder back to computer 1 since the events folder is already there. I copied project folder back to computer 1 but the files wont open. I dont have computer 2 available.
Please help!!!

Hi
No that's not the way to do it - iMovie gets confused and in some cases the problems might be un-repairable.
You've got several problems
• iMovie'08 - CAN NOT MOVE PROJCTS - You NEED iMovie'09 or iMovie'11 - I see no other working solution
• Never MOVE or alter any folder named
iMovie Projects - or -
iMovie Events
on DeskTop/Finder - This might be very harmful
• Moving (Projects) and Events - HAS TO be done within the iMovie Application.
You've got an Evets window and here You can view Your Events in two ways - Yearly - or - Yearly per Hard disk
Here You can move within this "window" to another location
• Projects - NO they do not contain Your full movie - only a document on howto use the material in Event folder
and there might be worse if You added Photos from iPhoto and Audio from iTunes/Garageband - then You have
to get this over to the second Mac too, to be able to continue editing.
So to move Your projects to another Mac You need
• iMovie'09 or 11
• an external hard disk -
MUST BE Mac OS Extended formatted - as UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO
Should be a FireWire one - as UBS/UBS2 performs badly when used for video
• Then move/copy over within Project resp Events window in iMovie Application
Hopefully I've been not to confusing or badly structured to be followed.
Yours Bengt W

Need Help with complex query and computing values

I have an issue trying to combine data from several tables. I need help trying to compute the "Total Hours", "Max Pressure" ,"Average Pressure" while displaying the "Manufacturer",
"Part Type" , "Serial Number", "District", "Status","Truck Type",and "truck number" for a certain Part on all Trucks. I need to be able check and see if the serial number was on
a particular job and calculate the hours of that serial number if it was on that job and the jobdate falls between the install date and removal date. Ive tried but keep getting either
repeating rows, total hrs of the truck instead of the serial number. Ive considered doing a pivot to display it but have been having trouble putting it together.
table 1
(*records of parts*)
Contains serial number,truck number, part type, part number, install date, removal date, status
table 2
(*records of Jobs*)
contains Jobnumber, JobStartdate, Max pressure, average pressure, and Totalhrs
table 3
(records related to jobs and trucks)
contains jobnumber, district , and truck numbers
Table 4
(records of manufacturers and part numbers)
contains partnumber, manufacturer name, and truck type
I would like to get it to show like below
SerialNo   PrtType
MFG      TruckNo
TrkType    TtlHrs
   MaxPr   AvgPr
  Status
Dst
AB345     1200series
NGK        2G34
Boss X       400     10,000
9500  NonOp
NE
Thanks in advance

Hope this helps
Note: (Date of Mar 1 2014 was just extended to a further date so the system would know that its still operating when calculating current hours)
Table 1
SerialNo    TruckNo InstallDate RemovalDate      Status       PartNo      PartType
BJ1002       F917   2013-09-17   2014-03-01   Oper         L871235       BJ 3000 GL
CWS1002   F104   2012-11-21 2013-03-29   NonOper   L76088-450 CWS 2000
CWS1003   F104   2013-04-24   2013-08-01   NonOper   L76088-450 CWS 2000
CWS1005   F187   2012-11-21 2013-04-04   NonOper   L76088-450   CWS 2000
CWS1006   F187 2013-04-24   2013-06-30   NonOper   L76088-450 CWS 2000
CWS1007   F187   2013-06-30   2013-03-01   Oper        L76088-450 CWS 2000
CWS1009   2F60   2013-05-05   2013-03-01   Oper        L76088-450 CWS 2000
CWS1011   F809   2013-05-28   2013-08-28   NonOper   L76088-400 CWS 2000
CWS1013   F990 2013-06-11 2013-10-29   NonOper   L76088-450   CWS 2000
CWS1015   F783   2013-06-28   2013-03-01   Oper        L76088-450 CWS 2000
Table 2
JobNumber   Date                 District        PrAvTreat PrMaxTr TotalHrs
553811287   2012-01-19    Fairmount   7337        8319     1.53
652110088    2012-08-20    San Antonio 6340       7075      0.47
652110090    2012-08-21    San Antonio 6134       7131      0.62
652110091    2012-08-22    San Antonio 6180       2950      0.58
652110092    2012-08-23    San Antonio  5959       6789      0.64
652110093    2012-08-23    San Antonio 6165       7466      0.62
Table 3
TruckNo District    JobNumber
1F01      Odessa 10011012329
1F01      Odessa   10011012333
1F01      Odessa   10011014831
1F01      Odessa   10011014834
1F01      Odessa   10011012332
1F01      Odessa   10011012328
1F01      Odessa   10011014829
Table 4
PartNumber    Manufacturer  TruckType
L322020-2     Jimmy Dean   Ford T
L322738-2     Lucas             Ford T
L47869-1       Jimmy Dean   Ford T
L76070-650   NGK               Ford T
Sam Howard

I need Help! Power Mac g5 computer won't load past grey screen.

Tonight my old power mac g5 computer (that I had for 8 years) has finally decided not to boot anymore. What happend was I was on my computer, and looking up something on spotlight until it froze over, (i am assuming its a kernal panic) It then crashed. I turned it off and tried to reboot it. At first, only the apple symbol appeared and no loading bar and then I turned it off again, but now I have a continuious loading bar. I've turned it off several times and rebooted but to no success (my cd drive is also broken) I fear I may have to get rid of it but I cant afford another tower right now..they're too expensive....What can I do?
Thank you, and I look forward to hearing from you.

OK, a number of things, sort of in order:
1. Does it boot from an install disc? You may need to hold the left button of a wired mouse down at boot to get the optical tray to open, or you can use open firmware to open and close the tray. (see below) Can you run Disk Utility from the install disk to check and/or repair your boot volume?
2. How about the PRAM battery? How new is it? If it is the original, you need to replace it for sure. If it if more than a couple of years old, it should be replaced preemptively as it is likely weak enough by now to have caused some mischief (more so if the machine has been off power and unplugged for any significant amount of time).
3. Have you tried a PRAM reset? (Hold down cmd-option-P-R key combination at boot until you hear the boot tone a second time).
4. Have you tried a PMU reset?
So what is happening is that something is getting hosed early on in the boot process. You might be able to see what is going on by doing a verbose boot (hold down cmd-V at startup until you get to the gray screen with Apple embossment) and hopefully getting the Unix terminal screen with its output detailing the boot process. Were I a betting man, I would have to guess a problem with the boot volume's directory structure. That's why I listed the booting from the install disc first. If it boots from the install disc, then most of the system is probably in good shape but there may be problems with the boot volume's directory.
Opening the disc tray using open firmware:
You boot into open firmware by holding down the cmd-option-O-F keys until you get the white open firmware terminal screen. You are not really using the hard disc or any really advanced capabilities of the system. Now, type the following command to open the optical drive tray:
eject cd <enter>
Repeat the command after inserting the install disc and the tray should close. Then enter the following command:
reset-all <enter>
and the machine should restart. You can either hold down the option key at boot to bring up startup manager to select the optical, or more simply, hold down the C key as the machine restarts and keep it held down until you see the system loading.

I need help connecting my iPhone and computer together.

I need help connecting my iPhone to computer

Howdy sprinklemk,
Welcome to Apple Support Communities.
Take a look at the iPhone User Guide, it answers your question about how to connect your iPhone to your computer and provides additional information that you may find helpful.
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 18.
To use iPhone with your computer, you need:
An Internet connection for your computer (broadband is recommended)
A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:
OS X version 10.6.8 or later
Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later
Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin the other device.
Cheers,
-Jason

Need help with iphone4 connecting to computer

On the weekend my friend had put her iphone4 on my computer and now wen i connect my iphone4 to my computer it keeps saying that my iphone is her iphone but its not...
I really need help coz its doin my head in, i have uninstalled the driver and itunes and reinstalled both and it still does the same thing

try changing the following wireless settings
radio band - wide
wide channel - 9
standard channel - 11
if this doesn't work , ensure that the router has the latest firmware ..

Need help moving from PSE6 on Computer A to PSE8 on Computer B

They are both on a network.
It looks like I could use backup and restore but it seems that I have to copy my files twice....once to backup and once to restore. Is there an easier way to just copy them across the network?
Also, I want to retain all of my catalog and tagging info. Do I need to upgrade anything first on COmputer A, or will the act of doing backup and restore (if I use that method) work when the files start to be used by PSE8?
Computer A is a Windows XP. Computer B is Windows 7.
Thanks for your help.

Backup and restore will work. Always a good idea to have backups. Not sure why "I have to copy my files twice" is a problem, its the computer doing the work, not you.

Solaris 10 - Help replacing Motherboard

I have been running Solaris 10 for a number of months on a pieced together PC. Recently the motherboard died (ECS Nforce6M-A V:2.0). Unfortunately, I was not the one to set all this up, and have been desperately looking for help to get this system up and running again. I purchased an Asus M3A76-CM to replace it with. I wasn't able to find another ECS board of the same model.
The issue is that it seems (and I've been told) that Solaris doesn't like the fact I changed the motherboard on it. During the boot up process, I get into the Grub selection menu (the two options are: Solaris Express Developer Edition 9/07 snv_70b x86, and Solaris failsafe). If I selected the first option, it displays the first 3 lines (which I can't seem to catch) and immediately reboots. I can enter the failsafe mode just fine however.
Can someone direct me to a link (or help directly) as to what I must do to get this up and running? I have been and will continue to search for an answer on my own, but I'm racing the clock as is :(
Thanks for any help (and I hope this is the right section for this).

We are facing very similar (the same?) problem.
Does anyone have a solution to this?

Need help installing photoshop onto new computer.....

Need some help installing photoshop onto my new computer. Way back when I was in college I purchased photoshop. It has worked fine for everything that I do, plus I know all the tricks to this particular version. It has only been installed on 2 computers before...both my own computers. Now we have a new computer because the last one broke & I haven't been able to download the program. I have the cd etc but wondering why I can't download it. Could it be because it is so old....?? It's Photoshop 4.0 I have several docs that I need to open but can't because they're in photoshop....ugh... Please someone help. Thanks!!

Photoshop version 4 (shipped 1996) or Photoshop CS4 (shipped 2008)?
The CS4 Trial version can be downloaded from
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Follow the Very Important Instructions on that page first BEFORE you click the download link
Enter your serial number to license it.

Need help connecting to my home computer from work

Hi, I am trying to connect to my home computer from my work computer, but I am not able to connect to it. I do CMD+K (from work) and type in the IP address (with & without smb:// &/or afp://), but home computer does not show up or the connection times out. My home computer is awake and file sharing & remote login are on. My home computer is an Imac 20" Intel Core 2 Duo connected via cable modem @ 12mbps running 10.5.2. My work computer is a Power Mac G5 Duel 2.7 running 10.4.11. Am I not able to connect because of the OS difference? Any help would be appreciated.
p.s. Sorry if this is a repost, but I couldn't find any posts with questions like this. Thanks.

"Screen Sharing" needs to be turned on. "Allow access" needs to be configured properly.
Can you connect to you computer from the office via command K using afp? Does the login window come up? What kind of a network do you have at the office? Are you behind a firewall there or is it a direct connection? (one of our labs at my university is tied down so tight you can't connect to any ip addresses outside the firewall unless the IT administrator puts that ip address into his little magic box,)
Last week I was using my laptop to connect with a computer across the hall. It would not recognize the ip address. I rebooted the laptop and it started working.
If you have the correct ip address and your office network is not behind some kind of heavy duty vpn firewall it may be your router at home.
Of course maybe Rush Limbaugh made a real point today in calling for Steve Jobs to recognize there are some bugs in Leopard and fixing them.

Need help with my iTunes-new computer-can't access my music

We just got a new computer and I transferred all of my songs from the old to the new and now when I try to access them in iTunes I get an error message that "it cannot be used because the original file cannot be located" Do I have to put in the DVD with all of the files on it in order to use any of my song? I thought that I saved them to my hard drive, but who knows....HELP!!! pLEase!!!

You haven't told us enough about what you did.
You need to explain exactly how you did your transfer.
If you don't care about your ratings and play counts and your really did copy your files across, there is a simple way of getting going again.
With iTunes closed drag iTunes Library.itl and iTunes Music Library.itl out of the iTunes folder to the desk top.
Start iTunes and you will have an empty library. Now simply add the folder with your music files in it - normally iTunes Music - to iTunes with File>Add folder to library.
If you didn't copy your files across, try putting the DVD in the drive and opening iTunes - can iTunes find your files now. If so it is a sign you added the files to your library without copying them to your internal HD.

Need help getting music onto new computer.

I was curious if anyone knows how to get music from my 60 GB 5th Gen iPod onto my new computer. My old computer crashed, so all that I have is my music on my iPod, and I need to find a way to get my music onto my new PC. I figured I could just plug it into my new computer and that i'd be good to go, but apparently I was wrong. I've researched it a bit and all that I can find is confusing software that is going to cost me more money. Any suggestions would be greatly appreciated.
60 GB 5th Gen Windows XP

You can't sync or drag your non iTMS music back directly from an iPod to iTunes. The transfer of non iTMS content is designed by default to be one way from iTunes to iPod, the transfer of purchased content has recently been introduced with iTunes 7. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. As iTunes 7 is just out some of these may not have caught up with it yet though I haven't experienced any problems with the Mac software I use.
YamiPod Mac and Windows Versions
iGadget Windows Only
iPodCopy Mac and Windows Versions
iPod Access Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
CopyPod Windows Only
For more on the new function in iTunes 7 look under under File>"Transfer Purchases from iPod" which transfers iTMS purchases. A paragraph on it has been added to this article: How to use your iPod to move your music to a new computer
If your iPod is set to update automatically take care when connecting back to your computer and an empty iTunes. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No* (or "Cancel" if you are using iTunes 7). Pressing "Yes" (or Erase and Sync in iTunes 7) will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. In iTunes 7 Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. External drives are comparatively inexpensive these days and you can get loads of storage for quite a small outlay.

New builder, need help with motherboard.

This is my setup.
I bought all parts from amazon.
Sentey® Bx1-4237 V2.2 W atx case
EVGA SuperNOVA 750 80PLUS B2 Bronze Certified
MSI ATX DDR3 2600 LGA 1150 Motherboards Z97 GAMING 5
Intel Core i7-4790K Processor (8M Cache, up to 4.40 GHz) (BX80646I74790K)
G.Skrill ram stick
970 GTX Geforce EVGA
The issue I'm having is the computer would power on. fans running, display working on the case.
Graphic card is running it's fan. but my screen won't turn on or display. Before posting this thread. I followed the 12 steps on how to solve the "Display not turning on thread".
Some extra things I've try, removing CMOS for 30sec. Removing HDD and and starting it up. Still no screen.
Some extra information.
I put my computer case on a wooden table, the ground is wooden tiles. While plugging in everything following the motherboard manual. Then I proceed to put in my Graphic card 970 GTX into PCI slot 2. Place the power supply in, hooked up all the cord to every fan. Then I hooked up my sata cable to my harddrive.
I start the computer and it was running so I thought YES IT WORKS. though...all it does is stay powered on. after a solid 30sec though the Graphic card fans start slowing down to a complete stop. Then I notice a button on my computer case that said sound. I turn it on. Then I restart the computer then I hear 9 short beeps. So like quick 3 - beeps, 2-3 sec pause, 3 beeps, 2-3 sec pause, 3 beeps. so 9 short beeps in a interval. I really want to computer working.
I've also read that the CPU I have isn't compitable with the motherboard on the support site for the msi motherboard. Though I've read many reviews of people using the same cpu and having no issue with the motherboard. Lastly I look up those beep code 9 beeps has to do with bad bios checksum basically bad motherboard? though it said it was the code for Award Motherboard which I don't know if mine is it. So any help would be great.
I spent all my paycheck money on it this month e.e So I really want to figure out whats wrong and fix it so I have a computer to use.
TLDR I think my motherboard is bad but how can I be sure? Should I send it back to amazon. it's gonna take a while e.e

Quote from: badboy2k on 11-January-15, 15:04:52
its not you BIOS! yours will have 1.7 installed on your board!
try without the GPU in the computer (take the gtx 970 out) use the onboard video outputs on the motherboard to see if it is outputting any graphics at all there?
I've just tried this took out my gtx plug in my monitor into the VGA slot. I still hear the beep sequence. 3 shorts beep every 3 sec, then after the 9th beep it stop. The fan just keep running.

Need help, replaced motherboard in my computer.

Similar Messages

Maybe you are looking for