Need help replacing a file in AE
Ok, here is my problem, I made a project on another computer and then I transfered to my computer. I dragged all of the images and sounds but ONE very important image. I downloaded that same image from online and I need help replacing the corrupted old image with the new one. Here is a picture with more detail.
I tried copy & pasting the layer properties and effects, but that didn't work. Any ideas?
Thanks,
Emal
For instructions on swapping out a footage item's source file, "Replace layer source with reference to another footage item".
Similar Messages
-
(need help) Replacing AVI files with MOV files in a edit.
I'm working on a large edit that uses low res AVI files for editing,
Though all the high res files are written as MOV's with exactly the same name (just being a different filetype)
Is there a way to automaticly re-link all those avi movies with those high res MOV files?
The edit is quite big, so it would save me a very tedious jobClose Premiere. Change the name of the folder the current AVI files are in. Reopen Premiere. When it asks you where the files are, point it to the new ones.
The only stumbling block may be the different extension. I'm not sure if Premiere will pass that by or trip over it. -
Need to replace a file in the application server
Hello Experts,
Through ABAP coding, I need to replace a file which is available in the application server from one path to another. I should not use OPEN DATASET, CLOSE DATASET, DELETE DATASET and all as they deal with the data. I need to replace the file with out touching the data of the file.
Could anyone please help.
I heard that i have to use some UNIX script.
Regards,
SudheerSudheer,
Try this...
WITHOUT TOUCHING THE DATA OF A FILE . . .Just Moving the file ( unix commands in abap )
DATA: command(255) TYPE c,
fnam_sour(255),
fnam_target(255).
fnam_sour = '\hme\usr\interface\..... " path of source file
fnam_target = '\hme\usr\interface\..... " target path, where file to placed.
OPEN DATASET fnam_sour FOR INPUT " fnam_sour -> path of source file...
MESSAGE msg IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc <> 0.
< error msg : no file exits>
else.
OPEN DATASET fnam_target FOR INPUT " fnam_target -> path where file to be placed....
MESSAGE msg IN TEXT MODE
ENCODING DEFAULT.
if sy-surc = 0.
CONCATENATE 'mv' fnam_sour fnam_target INTO command SEPARATED BY
space.
CONDENSE command.
PERFORM uxcmd USING command.
endif.
endif.
*& Form UXCMD
FORM uxcmd USING p_command.
**issue UNIX command by calling system function.
DATA: BEGIN OF itab OCCURS 0,
line(255),
END OF itab.
CALL 'SYSTEM' ID 'COMMAND' FIELD p_command
ID 'TAB' FIELD itab-sys.
ENDFORM. " UXCMD
Regards
Ram -
i need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?
Here is how to do it yourself.
http://www.youtube.com/watch?v=2h53otOBTsI
Here is how to send it to apple.
http://www.apple.com/support/ipod/service/battery/
Hope this helps! -
Need to replace pdf file on existing website. Please help!
Our intern left this summer and we're clueless about Dreamweaver. We have a Spry Menu with a link to a pdf file of our employment application. Our application has been revised, and we need to replace it on the website.
From what we have gathered, Spry Menu Widget is no longer available to download and we are unable to change the link to a new file via the widget because intern took his laptop with the widget installed.
So to make do, I have downloaded the files from the website to my Local folder, deleted the old employment application pdf file and have replaced it with the new application with the exact same file name as the old one.
My question is.... If I highlight the new application in our local folder and click upload, should this make the link in the menu bar go to the new application?
Thanks for you help in advance!Ok, sure. So we needed to replace a pdf file that was linked from our spry menu bar. We didn't have the widget and didn't think we could download it, so we went to the folder on the bottom right hand side of the screen and opened the remote folder. We then highlighted all of those files except for the / file at the very top. We then clicked the down arrow to copy those files into our local folder. Once they were downloaded, we went into the local folder and found the file we needed to switch out. We then deleted that file, named our new file the exact same file name, and clicked and dragged it from our computer onto the same folder that contained the file we deleted. We then highlighted that file, right clicked and chose "PUT", as Jon had instructed us to do above. It uploaded the file. When it was finished, we checked our website and got an error because the pages wouldn't load. However, a few minutes later we tried again and everything worked perfectly. The new pdf file had replaced the old one and still linked properly from the menu bar.
-
Hard problem. need help with contact file (data.syncdb)
hello everyone. i lost my iphone. i have the data.syncdb file.
how can i view this?
if i cannot view it can i send it to someone and they can replace their file on a old iphone (if someone has one) or touch? then they can see the contacts and email them to me? i would paypal you some $$ to help me out. i dont have much just need the contacts bad.
any help would be great.
Thanks!anyone?
-
Need Help-SOA 11g File Adapter unable to delete input file and its crashing
Hi All
Please find the details below:
1. We have created a simple SOA composite to Read file from an input directory, archive the file in an archive directory using Inbound File Adapter Read
and then use Outbound File Adapter Write to move the file to a output directory.
2. File Adapter needs to delete the file after successful read/retrieval.
3. We are using the "Use Trigger File" for invoking the file adapter. This is a new feature in SOA 11g
4. Also we are using the option of reading the file as an attachment as we are not doing any transformation in the composite
Issue Details_
1. When the trigger file is put in the input directory for the first time, the File Adapter reads the file, archives it and moves it to the output directory
2. However it does not delete the input file from the input directory and raises Fatal Exception mentioned below:
[*2011-01-12T16:55:48.639+05:30] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@19c243d]*
[userId: <anonymous>] [ecid: 0000IptyLrL9_aY5TrL6ic1DBOS_000009,0] [APP: soa-infra] File Adapter FileAdapterTriggerFilePOC PostProcessor::
Delete failed, the operation will be retried for max of [0] times
[2011-01-12T16:55:48.639+05:30] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@19c243d]
[userId: <anonymous>] [ecid: 0000IptyLrL9_aY5TrL6ic1DBOS_000009,0] [APP: soa-infra] File Adapter FileAdapterTriggerFilePOC [[
BINDING.JCA-11042
File deletion failed.
File deletion failed.
File : C:\Dibya\AttachmentTest\InputDir\TestFile3.txt could not be deleted.
Delete the file and restart server. Contact oracle support if error is not fixable.
If any one has faced similar issues, kindly provide pointers on how to resolve it.
Regards,
DibyaHi,
Using the file adapter, you can poll from multilple locations...
Keep the following property in your .jca file
<property name="DirectorySeparator" value="," />
While giving the path in File Adapter configuration, keep comma and give the next location....then the file will be picked up from the locations you gave....
Hope this helps...
Thanks,
N -
Need help to create file with name and current time stamp.
I need to create .xlsx file exporting data from sql database and file name would be 'FileName' and current yyyymmdd.
I'm trying to use following code but it's keep saying incorrect syntax near "+".
EXEC p_CreateExcel 'sql64', 'NewFile', '\\hrfile1\Shared\Buying Report\NewFile'
+ CAST(YEAR(CURRENT_TIMESTAMP) AS VARCHAR)
+ RIGHT('00'+CAST(MONTH(CURRENT_TIMESTAMP) AS VARCHAR),2)
+ RIGHT('00'+CAST(DAY(CURRENT_TIMESTAMP) AS VARCHAR),2)+'.xlsx'This is what I have on EXEC p_CreateExcel
USE [XePro01]
GO
/****** Object: StoredProcedure [dbo].[p_CreateExcel] Script Date: 02/26/2015 11:27:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[p_CreateExcel]
@db_name varchar(100),
@table_name varchar(100),
@file_name varchar(100)
as
--Generate column names as a recordset
declare @columns varchar(8000), @sql varchar(8000), @data_file varchar(100)
select
@columns=coalesce(@columns+',','')+column_name+' as '+column_name
from
information_schema.columns
where
table_name=@table_name
select @columns=''''''+replace(replace(@columns,' as ',''''' as '),',',',''''')
--Create a dummy file to have actual data
select @data_file=substring(@file_name,1,len(@file_name)-charindex('\',reverse(@file_name)))+'\data_file.xls'
--Generate column names in the passed EXCEL file
set @sql='exec master..xp_cmdshell ''bcp "set fmtonly off select * from (select '+@columns+') as t" queryout "'+@file_name+'" -c -t, -T -S'''
exec(@sql)
--Generate data in the dummy file
set @sql='exec master..xp_cmdshell ''bcp "set fmtonly off select * from XeProgst01.dbo.'+@table_name+'" queryout "'+@data_file+'" -c -t, -T -S'''
exec(@sql)
--Copy dummy file to passed EXCEL file
set @sql= 'exec master..xp_cmdshell ''type '+@data_file+' >> '+@file_name+''''
exec(@sql)
--Delete dummy file
set @sql= 'exec master..xp_cmdshell ''del '+@data_file+''''
exec(@sql)
GO -
I need help with viewing files from the external hard drive on Mac
I own a 2010 mac pro 13' and using OS X 10.9.2(current version). The issue that I am in need of help is with my external hard drive.
I am a photographer so It's safe and convinent to store pictures in my external hard drive.
I have 1TB external hard drive and I've been using for about a year and never dropped it or didn't do any thing to harm the hardware.
Today as always I connected the ext-hard drive to my mac and click on the icon.
All of my pictures and files are gone accept one folder that has program.
So I pulled up the external hard drive's info it says the date is still there, but somehow i can not view them in the finder.
I really need help how to fix this issue!you have a notebook, there is a different forum.
redundancy for files AND backups, and even cloud services
so a reboot with shift key and verify? Recovery mode
but two or more drives.
a backup, a new data drive, a drive for recovery using Data Rescue III
A drive can fail and usually not if, only when
and is it bus powered or not -
Need help with connecting file inputs to arrays
In this assignment I have a program that will do the following: display a list of names inputed by the user in reverse order, display any names that begin with M or m, and display any names with 5 or more letters. This is all done with arrays.
That was the fun part. The next part requires me to take the names from a Notepad file, them through the arrays and then output them to a second Notepad file.
Here is the original program: (view in full screen so that the code doesn't get jumbled)
import java.io.*; //Imports the Java library
class progB //Defines class
public static void main (String[] arguments) throws IOException
BufferedReader keyboard; //<-
InputStreamReader reader; // Allows the program to
reader = new InputStreamReader (System.in); // read the the keyboard
keyboard = new BufferedReader (reader); //<-
String name; //Assigns the name variable which will be parsed into...
int newnames; //...the integer variable for the amount of names.
int order = 0; //The integer variable that will be used to set the array size
String[] array; //Dynamic array (empty)
System.out.println (" How many names do you want to input?"); //This will get the number that will later define the array
name = keyboard.readLine ();
newnames = Integer.parseInt (name); // Converts the String into the Integer variable
array = new String [newnames]; //This defines the size of the array
DataInput Imp = new DataInputStream (System.in); //Allows data to be input into the array
String temp;
int length; //Defines the length of the array for a loop later on
for (order = 0 ; order < newnames ; order++) //<-
{ // Takes the inputed names and
System.out.println (" Please input name "); // gives them a number according to
temp = keyboard.readLine (); // the order they were inputed in
array [order] = temp; //<-
for (order = newnames - 1 ; order >= 0 ; order--) //<-
{ // Outputs the names in the reverse
System.out.print (" \n "); // order that they were inputed
System.out.println (" Name " + order + " is " + array [order]); //<-
for (order = 0 ; order < newnames ; order++) //<-
if (array [order].startsWith ("M") || array [order].startsWith ("m")) // Finds and outputs any and all
{ // names that begin with M or m
System.out.print (" \n "); //
System.out.println (array [order] + (" starts with M or m")); //
} //<-
for (order = 0 ; order < newnames ; order++) //<-
length = array [order].length (); //
if (length >= 5) // Finds and outputs names
{ // with 5 or more letters
System.out.print (" \n "); //
System.out.println ("Name " + array [order] + " have 5 or more letters "); //<-
}The notepad file contains the following names:
jim
laruie
tim
timothy
manny
joseph
matty
amanda
I have tried various methods but the one thing that really gets me is the fact that i can't find a way to connect the names to the arrays. Opening the file with FileInputStream is easy enough but using the names and then outputing them is quite hard. (unless i'm thinking too hard and there really is a simple method)By "connect", do you just mean you want to put the names into an array?
array[0] = "jim"
array[1] = "laruie"
and so on?
That shouldn't be difficult at all, provided you know how to open a file for reading, and how to read a line of text from it. You can just read the line of text, put it in the array position you want, until the file is exhausted. Then open a file for writing, loop through the array, and write a line.
What part of all that do you need help with? -
Need Help with .nnlp File.............A.S.A.P.
I'm having a problem also with my JNLP file. I have downloaded the program onto one computer and that computer is using j2re1.4.2_04
The other computers I believe are all running j2re 1.4.2_05
I'm not sure if that's make a difference, but on the computer with j2re 1.4.2_05 when going to the site where the .jnlp file is located, the application comes up and says Starting Application. After it gets to that screen it just stays there. I really need help with this as soon as possible.
Here is my .jnlp file listed below:
<?xml version="1.0" encoding="utf-8"?>
<jnlp
spec="1.0+"
codebase="http://www.appliedsolutions.com/placewiz"
href="Placewiz.jnlp">
<information>
<title>Placement Wizard 4.0</title>
<vendor>Applied Solutions, Inc.</vendor>
<homepage href="index.html"/>
<description>Placement Wizard 4.0</description>
<description kind="short">Short description goes here.</description>
<offline-allowed/>
</information>
<resources>
<j2se version="1.4+"/>
<j2se version="1.3+"/>
<j2se version="1.5+"/>
<jar href="Placewiz.jar"/>
</resources>
<security>
<all-permissions/>
</security>
<application-desc main-class="com/asisoftware/placewiz/loader/Exec">
</jnlp>This was due to a change in 1.4.2_05
the main class attribute
main-class="com/asisoftware/placewiz/loader/Exec">is wrong - it should be:
main-class="com.asisoftware.placewiz.loader.Exec">this didnt seem to mater before 1.4.2_05, but some change in java since then caused this bad class specification to stop loading.
/Andy -
Need help with copying files onto external drive
I need help! Trying to copy downloaded movie files from Vuze (which have downloaded successfully) and copy onto external hard drive to view them but it wont let me copy over to the external device. Any ideas how to fix this please???
Can you explain the steps you used, and the error message (or symptom), that says the copy did not work?
-
I need help retrieving Microsoft files lost when upgrading to OSX Mavericks
My daughter recently upgraded our Mac to the OSX Mavericks platform. Unfortunately, all of our Microsoft files, etc. are gone! I need to know how I can retrieve these files or if I can. I'm honestly not impressed with this new platform. I need help asap and your help is truly appreciated.
You have to make the backup yourself. That's your only protection against file loss whether accidental or catastrophic. In fact you should have at least two of them - each done differently and on separate drives.
If your files truly were "erased" then you can see if they can be recovered:
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
3. Time Machine requires a backup drive that is at least double the
capacity of the drive(s) it backs up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
1. Cool Drives
2. OWC
3. WiebeTech
4. Firewire Direct
5. California Drives
6. NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver. -
Need help in setting file name with special characters in attachment
Hi
We have a requirement where we need to set the file name that contains special characters (like Russian) and send mauil using Java mail.
If we set the file name as such, the attachment in the email contains garbled filename
Can you pl let me know how to resolve this?
We should use the file name as attachment name and this will have say special characters. The receiver who gets the mail should get with the correct attachment name
One important point.. the attachments are opened from MS outlook.
Thanks and regards
Ram
Edited by: 884910 on 13 Sep, 2011 5:00 AMRead the FAQ carefully. You don't need to call encodeText unless you're using a really
old version of JavaMail.
And, it depends on whether the mail reader you're using is handling encoded parameters
according to the (new) MIME standard, or according to the (old) non-standard hack.
Sadly, without knowing what mail reader the recipient is using, it's impossible to use
encoded filenames that will work everywhere. -
Need help with backup files made by HP Recovery.
So in 2011 I had made a post about a DV9 series HP laptop I had that I felt needed a harddrive. Well the laptop has been sold to a friend of mine and he has since fixed the issue it had. My curent deboggle is trying to deal with the 36GB of data it backed up onto an external USB powered harddrive. The information was saved from a system that ran Windows VISTA, on that same DV9 Pavilion. I have a new laptop and it's a Pavilion DV6 running windows 7. Is there some sort of 3rd party application or an uncommon HP utility that can open, run or modify. Specificaly I need to some files but not all, but if my only option is to extract all then that would be fine also. There is an executible in the backup folder but it doesn't extract anything it just locks up.
For the TLR portion, need to access backup files made on an older HP laptop with windows vista to a newer HP latop running windows 7.Terribly sorry for the post, I should have researched more before posting. I found the answer to my issue in another thread here on the HP forums! Thanks so much!!
Maybe you are looking for
-
How to extend time before sleep mode initiates ?
I just want to change the timing before it goes to sleep so the screen stays active whiteout me putting in input of some kind. My computer times out very quickly while I'm doing work so I then have to login when I go back to use it. It doesn't last
-
Cable needed to present Keynote from Macbook? In College.
I have a new Macbook and want to take my macbook so i can present a keynote presentation i created. this will take place at my college, which all classes has a projector (but its mounted on the ceiling) and the projector is connected to a computer, w
-
I work for a Fire Department by the way. Government entity.
-
Project Upgraded from xcode 3.2 to xcode 4.5 give semantic errors
I upgraded my project from xcode 3.2 to xcode 4.5 My code is platform independent and it compiles sucessfully on Windows and Linux with out any errors But on Mac 10.7.4 and xcode 4.5 it gives semantic errors - "Explicit specialization has extraneous,
-
Multi-page document with multi Master-pages
Using InDesign CS6 (Mac): I'm to start a 50-page document that's single-pages (not spreads) for 3-hole-punch book. I'm using 2 Master pages, which are alternating between the front and back of each sheet. So page 1 is master A, page 2 is B, 3-A, 4-B