Need help replacing a Netgear router with my old used wrt54g from another house.

I had a WRT54G at my old house that was working great. Now the renters moved out and I got the router back. I have been having some issues with the netgear router Im using now so I would like to replace it with the Linksys. How do I do this? Do I need to hit the reset button? What do I set the settings at and how do I set up security so others can't access my network.

Whoaw! Take it easy Ragnar....
It is easy to setup the router with your existing network. I'd like to know your ISP. In a way, you can have the router set up manually according to your ISP settings, whether it is cable or DSL.
For setting up the wireless to be secured, you can check this link.
for heads up! <<<call_me_jam_>>>

Similar Messages

  • Need help replacing Windows Vista Basic with XP Pro on T500

    Okay guys...My vista basic is not sustaining itself much longer so I want to get rid of it and downgrade to XP...but there seem to be a lot of problem/obstacle/issue...
    I can't seem to restore my factory content from the hard drive and I don't have enough cd to copy the reserved factory partition...I'm thinking if I don't touch on that partition during the xp install, is there a program I can download to have my xp access that partition afterwards?
    I downloaded all the drivers and lenovo software from the website; what I don't have is the SP2 slipstream...instead I have a original XP "gold" but I just can't seem to burn a slipstream into a bootable one so I'm wondering if the original "gold" wil do...?
    and since this is XP installation I've been reading the access help article on the the installation and the Matrix storage driver..which doesn't make much sense since it seem to refer to driver file on C: while scrapping Vista will surely wipe it off....
    currently i'm living with Vista in safe mode only and have no clue what to do...
    can people please guide me through what should I do here...Thanks.
    +if you need clarification I'll glad to provide more detail and clarify...and please no "update to 7" suggestion..

    Hi drixmanbeta,
    Which manufacturer provided this XP gold version is? whether it will work or not; your guess is good as mine.
    The proceeding guide is very detailed guide on installing XP on thinkpads, you will find it quite helpful:- http://forum.notebookreview.com/showthread.php?t=188992
    As for Windows to access the factory partition, it is always hidden from Windows, the OS has no way to retrieve it even though it is visible in disk manager. On the other hand, you can subsequently fix the corrupt boot sector on clean install:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-54483 [which will make thinkvantage button to access service partition during startup]
    The ability to create RnR discs is only accessible on factory preload so you will have no such privilege on clean install.
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Need help replacing original audio track with song.

    Hi experts
    I'm in the process of trying to create a movie for my daughters. What I did was film my daughters signing to a song that was playing on a CD player. I'd like to remove the audio track and replace it with the same song I purchased on Itunes. So far I able to import the video and song and put them on the timeline.
    Now I can't never get the song I added to the timeline to play. How can this be done? And, please, point me to a good book
    Thanks,
    Francis Ouellet

    Yes, I import both the movie and the song into the browser. Then I drag and drop the video into the timeline (V1) the corresponding audio track is moved automatically to A1 and A2. This plays well. Now I drag and drop my purchased song to the timeline (A3 and A4). If I hit the play button it only plays my video and sound (With a beep every second or so).
    It just seems that the video and music tracks aren't linked together. Sorry, just purchased FCE this weekednd

  • I need help I want to analyze and create reports using data from my firefox history files .

    I am not quite sure where to post this. I had a program for analyzing my firefox history which no longer works due to the change in how firefox stores history data. I am not an sqlite user. Any help will be greatly appreciated.
    I downloaded the sqlite manager addon and it is now installed on my firefox browser. I have tried it out and can make some sense of it. I would like to know how to decode the time/date storage system.

    It uses Unix time, which is the number of seconds that have elapsed since January 1, 1970 00:00 UTC /GMT.
    http://en.wikipedia.org/wiki/Unix_time <br />
    Here is an online converter tool for Unix times. <br />
    http://www.esqsoft.com/javascript_examples/date-to-epoch.htm

  • I am at a total loss. I received am airport express to replace a netgear router. I need a step by step list of how to get it working. I am not very technical

    I am trying to get an airport express to work, it is replacing a netgear router. Tried following the directions that came with it plus suggestions sent to me  but so  far I am not able to get things going. Can anyone send me a step by step list from start to finish and also explain what numbers, passwords etc that I would have to install. I am the stupid in the KISS method of doing things

    Hi doctorshane
    Your router is the heart of your network. Replacing one changes everything.
    Please follow Philly_Phan's instructions here:
    My airport express won't stop flashing amber and I can't figure out how to hock it up.ihad a router which worked fine
    To which I would add: disconnect your modem from power and let it rest a moment while you configure your Express. Make it a habit to do this whenever you change the device connected to a cable or DSL modem. Most modems will refuse to communicate with anything new, until its memory has been reset with a power cycle.
    If you still have difficulty please explain where you are getting stuck. If you reply in that thread, not this one, it would help others with your problem. Don't begin a new question unless the recommendations you receive are getting nowhere or your question doesn't get any replies after a day or so. Philly_Phan's instructions are correct so follow them.
    Otherwise, you are likely to repeatedly receive the same advice and will fail to achieve any progress.

  • I need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

    i need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

    Here is how to do it yourself.
    http://www.youtube.com/watch?v=2h53otOBTsI
    Here is how to send it to apple.
    http://www.apple.com/support/ipod/service/battery/
    Hope this helps!

  • Need help replacing a file in AE

    Ok, here is my problem, I made a project on another computer and then I transfered to my computer. I dragged all of the images and sounds but ONE very important image. I downloaded that same image from online and I need help replacing the corrupted old image with the new one. Here is a picture with more detail.
    I tried copy & pasting the layer properties and effects, but that didn't work. Any ideas?
    Thanks,
    Emal

    For instructions on swapping out a footage item's source file, "Replace layer source with reference to another footage item".

  • I need help syncing my contacts between Outlook and iPhone using iTunes. I followed the steps given and ended up with just email addresses showing in my contacts even though I have phone numbers and snail mail in my Outlook Contacts. Using  Windows 7

    I need help syncing my contacts between Outlook and iPhone using iTunes. I used the knowldge document and set it up to transfer my Outlook contacts to the iphone using itunes.
    In contacts on the iphone I only see the email addresses.
    Yet in Outlook I have email, snail mail and phone numbers.
    I followed the knowledge document from iphone.
    I did it once, didn't work so deleted all the contacts from the phone and tried again. Same result. I have a PC using Windows 7 64 bit.

    You can't access an Exchange account via ActiveSync with the Address Book and iCal on your Mac.
    You can access a MM account with Outlook on your PC at work and keep your MM email account server stored mailboxes synced between your PC at work, your iPhone, and the MM "cloud". Not sure about syncing MM contact info and calendar events with Outlook at the same time with an Exchange account.
    This will not provide for syncing your Exchange account contact info and calendar events with the Addresss Book and iCal on your Mac because the accounts are separate.
    You can access an Exchange account and a MM account at the same time with the iPhone's mail client, and sync contact info and calendar events over the air with both accounts at the same time. You can view combined contact info or separately for each account, and the same for calendar events.

  • HT5654 please I need help, I have not been able to upgrade my iOS from 6.1.2 to 6.1.3?

    please I need help, I have not been able to upgrade my iOS from 6.1.2 to 6.1.3?

    Hello mpacology
    The article below will provide assistance with upgrade your iPhone operating system. You can do this through iTunes or through the Software Update section in Settings >General > Software Update
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I need help.  Can LiveCycle PDF Generator accept network print jobs from a PCL only source?

    I need help.  Can LiveCycle PDF Generator accept network print jobs from a PCL only source?

    More information about this game:
    The game should generate a random obstacle course for the player. The first column of the grid, however, should consist of all empty pieces, with the exception of the upper left-hand corner, which is the grid location where the player initially resides.
    Enter a loop in which the following things happen (not necessarily in this order):
    Print the current board configuration. Additionally, a key should be printed describing what each piece is.
    Get an action from the user. The player can move up, down, left, or right. Use the following controls: up = 'i', down = 'm', left = 'j', right = 'k'. The player can move at most one block at a time. Of course, if the player tries to move into a spot occupied by an immovable block, the player will not move.
    Inform the player whether they have won, or if they have lost (a player loses if they step on a bomb piece).
    If the player types 'q', the game should terminate.
    I am still stuck on this maze generator stuff.... Please help me....

  • Just replaced my iphone 4 with new 4.  restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

    just replaced my iphone 4 with new 4.  restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

    Read another post in the forum about this and it appears this app also installs a profile with a proxy service that you will have to try and delete as well. Check that out.

  • I need to repair a Macbook Pro with disk utility using target mode to another my iMac. Can I use ethernet cable or must it be firewire?

    I need to repair a Macbook Pro with Disk Utility using target mode connected to my iMac. Can I use ethernet cable to connect them or must it be firewire?

    Firewire

  • How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

    How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

    In Editor, go to the expert tab.
    Open picture B, the one you wish to select the "replacement" face from to add to another picture.
    Use one of the selection tools, e.g. selection brush, lasso tool, to select the face. You will see an outline ("marching ants") once the selection is complete
    Go to Edit menu>copy to copy the selection to the clipboard
    Open picture A, then go to Edit>paste
    Use the move tool to position the face from picture B to cover the face on A
    In the layers palette you should see picture A as the background layer, and face B on a separate layer

  • HT1766 guys, i need help. my iphone 4s lost everything. i got an email from "find my phone" saying that all will be erased. what can i do????  please help

    guys, i need help. my iphone 4s lost everything. i got an email from "find my phone" saying that all will be erased. what can i do????  please help

    How did u get that iphone? the original owner is screwing you via icloud account...

  • How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

    How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
    I currently run OS X 10.10.1
    Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
    Here is an example of what i want to happen.
    I will have 2 tabs: Contact | Sales
    Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
    for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
    Now how do i do this, Excel can do this so how can numbers do it?

    Hi Shegra,
    Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
    quinn
    Script starts:
    -- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
    property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
    property DataEntryTable : "Sales" --name of table with popups to be refreshed
    set copyRange to {}
    property PopValueSheet : "Sheet 1" --name of sheet with popup values table
    property PopValueTable : "Contacts" --name of table with popup values
    set PopStartRow to {}
    tell application "Numbers"
      set d to front document
      set ps to d's sheet PopValueSheet
      set pt to ps's table PopValueTable
      set s to d's sheet DataEntrySheet
      set t to s's table DataEntryTable
      set tf to t's filtered --this records filter setting on data Entry Table
      display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
      set PopStartRow to {text returned of result}
      tell pt --convert list to alphabetized popups
      set ptRows to count rows
      set copyRange to ("A2:" & name of cell ptRows of column "A")
      set selection range to range copyRange
      set selection range's format to text
      sort by column 1 direction ascending
      set selection range's format to pop up menu
      -- popupsmade
      set selection range to cell ptRows of column 1 of pt
      set v to value of cell ptRows of pt
      end tell
      activate application "Numbers"
      tell application "System Events" to keystroke "c" using command down
      tell pt
      set selection range to range copyRange
      set selection range's format to text
      end tell
      tell t
      set filtered to false
      set tRows to count rows
      set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
      set selection range to range pasteRange
      tell application "System Events" to keystroke "v" using command down
      set filtered to tf
      end tell
    end tell

Maybe you are looking for