Need help replaying a swf correctly with its music

I created an eHoliday card and there is a button at the end of the swf that you can click to replay.
It plays fine the first time but automatically replays at the end and there is no music the second time.

my actionsript probably isn't set up right:
for the replay button:
on (release) {
gotoAndPlay(2);

Similar Messages

I need help really bad. im trying to sync music on my ipod, but a message comes up say " cannot synce photoes in ipod because the folder pictures cannot be found . what do i do ?

i need help really bad. im trying to sync music on my ipod, but a message comes up say " cannot synce photoes in ipod because the folder pictures cannot be found . what do i do ?

Try deleting the iPod Photos Cache folder. There may be more than one. For its location see:
iTunes: Photo sync creates iPod Photo Cache folder
Also, go to the Photos pane for the iPod in iTunes and make sure syncing photos is unchecked.

Need help to know how to take my music off my laptop and put it on a extern

need help to know how to take my music off my laptop and put it on a external drive and let itunes see it.

You might find these articles useful:
iLounge - Managing your iTunes Library on an External Hard Drive
iTunes for Mac - Moving your iTunes Music Folder
iTunes for Windows - Moving your iTunes Music Folder

Need help in Creating DB manually with OFA

Hi,
I want to create database in 10g manually and for this purpose
I need help.
since we can use OFA for storing Control files, and redolog file
and datafile by describing them in Create database command but
how to store any instance related file like spfile, pfile or network
related file.
once the oracle 10g database software is installed then if we want
to create database then how can we separate the database file and
all other instance files from software binaries because I've noted
that creating database with DBCA create all instance files along with
binary files of the software although DBCA give you option of creating
database related file in some other location/directory.
kindly help me in this I want to achieve above task in compliance with
OFA
Thanks and Regards,
D.Abbasi

Abbasi wrote:
Hi,
I want to create database in 10g manually and for this purpose
I need help.
since we can use OFA for storing Control files, and redolog file
and datafile by describing them in Create database command but
how to store any instance related file like spfile, pfile or network
related file.
once the oracle 10g database software is installed then if we want
to create database then how can we separate the database file and
all other instance files from software binaries because I've noted
that creating database with DBCA create all instance files along with
binary files of the software although DBCA give you option of creating
database related file in some other location/directory.
kindly help me in this I want to achieve above task in compliance with
OFA
Thanks and Regards,
D.AbbasiTHe OFA spec (as best I recall) states that one of the levels of directory for all of your data files will be the db name. So if you name your database 'orcl', every file system in which you keep any files related to 'orcl' will be in a directory name 'orcl'.
As for what happend when you created your db. Oracle will default to putting things in the Oracle home structure because that's the only thing he can guarantee will be there. But you had the option (indeed, the obligation) to override these defaults.
BTW, when using dbca, if you chose any of the pre-canned database types, the database will be created by doing a restore from a pre-canned backup. If you chose 'custom' database, the database will be created by way of a CREATE DATABASE script. It would be instructive time well spent for you to go through dbca and select 'custom database', pay attention to all of the options as you work through, then at then end, deselect "create database" and select "generate scripts". Do the same for one of the pre-defined database types. Then study the scripts generated by each method.
Edited by: EdStevens on Aug 16, 2009 8:46 PM

Need help. importing pictures to timeline with various length.

Need help cant find old toturial
I am trying to make a template for a picture movie where i have everything ready so i just need to add 250 pictures and then it will automaticly shift the pictures to the beat of the music. I once saw a toturial how to do this but cant find it. it was something with manually setting markers at the music beat and then just add all the pictures. but i must have missed something pls help..
Bo

Its called automate to sequence with unnumbered markers.
http://tv.adobe.com/watch/learn-premiere-pro-cs5/gs04-making-a-rough-cut-in-adobe-premiere -pro/
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d1ba .html

Need help in installing JBOSS along with Jdk version

Hi,
I am using Linux 64 bit Machine.
I have Jdk1.5.0_18 and jboss-4.2.3.GA installed in my machine.
But the JBOSS Server is failed in booting.
What version of JBOSS Server needed for the 64 bit along with Jdk1.5.0_18
Any help will be needful for me
Thanks and Regards

The name of this forum is "Database - General" not JBOSS, JDK, or "anything goes."
Please delete this post and post your question in the appropriate forum.
Thank you.

I need help loading a swf file in a flash website

Hi,
I am an interactive design student working on a flash portfiolio and need help. I can't figure out how to load a game I made in flash into my porfolio so that it loads after clicking on a button, becomes playable, then have a button to leave the game and go back to my portfolio. I'm working in Actionscript 2.0 because that's all my teachers will show me and I have minimal actionscript knowledge.
Thanks,
Emily

I thought I got it to work with loadMovie, but it only plays the intro, and then either repeats or exits as soon as the first bit of actionscript starts

Need Help Please: Audigy2 Value conflict with onboard sound

<SPAN class=postbody>System info: Windows XP Home Edition, 2.4 GHz IntelPent4, 52MB of RAM; DDR 200(33MHz), MSI MS-6547 (645 Ultra) motherboard. I need help! Sigh...well I am trying to put in a Soundblaster Audigy2 into my computer. I am under the impression that I have to disable and remove all onboard sound b/c it conflicts with the new sound card, ?. I currently have onboard sound ( AC97 Audio Controller ). I went to add/remove programs and removed the AC97 from there. I also went to MyComputer/Properties/Hardware/DeviceManager/Sound,Video,andGameControllers/AC97AudioContoller and deleted it. st Question: Under DeviceManager/Sound,Video,GameControllers...Do I need to remove the Legacy Audio Drivers? I know that I have to delete the rest of the drivers for AC97 and out of chance would Legacy be those drivers? I am guessing no...Also, is there anything else that I have to delete for the on board sound program to be gone? 2nd Question: I went to BIOS, and since I have windows XP home edition I think that configuration is a little different from what I read(I wont bore you with that). So, where do I go to "disable" the onboard sound in BIOS for Windows XP HomeEdition? Also, I read something about making sure the "Chip" was disabled but I could be paranoid. Do I need to worry about that? If you made it through all that text I thank you dearly. I hope that I can get some help from someone b/c I know nothing. I am afraid of making the wrong choice on BIOS and messing everything up. Thank You so Much! Ross Message Edited by RossRude3 on 04-06-2005 0:48 AM

Ross,
To fully disable teh onboard audio you would need to go into the BIOS to disable the Onboard Audio chip there. The manual with your motherboard or PC should have more detail on where exactly to find this setting, as it will differ per BIOS type. Generally it should be under a heading like Integrated Peripherals, and should be marked as the Onboard Audio chip, or AC97 Audio.
Cat

Need help in Custom component creation with cq

Hi,
I have created my own component in adobe cQ and able to drag an drop in any page. for each instance I am seeing the copy of
component under node /content/mypage/commoncomp. If I edit the properties using design dialog I can able to store values as
expected.
Need help in
1) When I drag and drop the component it shows null for the property by deafult if I click save on edit dialog then the
value is showing. The default value is not shown by default while drag and drop my component it requires atleast one time to
click save from dialog using design mode
2) I need to use the default properties of the orginal components which is root and use the duplicated properties if incase user edit the properties of duplicated component. This may be too messy.... to be more clear
I want to use a common component in many pages but the properties of the components should be updated only when user edit it in design dialog utill then I need the page to use properties of root component.
Thanks

You just need to create your own version of PlumtreeTopBarView (original in com.plumtree.common.uiparts), and use CustomActivitySpace.xml to override that view with your own view. Your version would use some kidn fo logic to determine whether or not to display certain elements. TheUI Customization Guide should help quite a bit, and we have several quickstarts for overriding views you can start from.
Is there some Help file in PT that I can reference that will enable me to find what namespace does GetRequestURL() belongs to?I would simply do a string compare. Tokenize the URL into the base address / control arguments, perhaps splitting on the "?" symbol; then tokenize the base address on the ".". You'll end up with three strings. For portal.plumtree.com, the three strings would portal, plumtree, and com. You can then use those string in the logig you add to PlumtreeTopBarView.
David Phipps
Plumtree Software

Need help: How to color correct professionally (with examples)

Post to video forum (before and after): Hi, I really need some help I want to color correct this video. I would love if someone had tips, either on:
-How you would correct the original
-What it looks like I'm doing wrong in my attempts (last 2 pictures)
Thanks!

I'd crunch it up a little more with a curves adjustment. These children don't look healthy and stronger contrast will help. Also push the reds toward a slightly more orange tone. They look too purple. There's also still an overall purple tinge which needs to be eliminated. See the included 3 minute quick shot of mine. Not perfect and requires more tweaking (too much yellow now, see the lips), but I think it better represents the feeling one would want to convey.
Mylenium

I need help, my iMac is swamped with video data, 1 TB of space and 950 GB is used by my video data! Help... its getting ugly

I have a 1 TB IMac, 950 GB of my iMac HD have been eaten alive by my Video Recordings of family events using my canon vixia hf 100 HD recorder. I cannot use my computer now, due to lack of space on the hard drive. I now own two 2 tb external hard drives. All I want to do is make 2 DVD copies of each video event from imovie and have one back up of each event on one of my externals and another backup in my time machine which is on the other external. It takes so long to transfer data from my canon vixia hf 100 through imovie to a DVD. I have swamped my Imac HD, and can't even burn a dvd to loosen the byte load. Can i transfer my whole iMovie library to my free 2tb external and utilize it to maintain and store all iMovie data?????
Help!

Depending on which version of iMovie you have it could be very easy, when you attach the external hdd to the mac it will appear in iMovie as one of the 'locations' where projects/events can reside. And you would move them ONLY from within iMovie, not outside of it. This will help keep any current projects and the events associated with them from breaking.
This is how it would work, attach the external hdd. Open iMovie go to the Projects Browser. Make sure you can see the external hdd in the list of devices. You then can drag the project directly over the icon of the external hdd. iMovie will ask you, do you want to move Events associated with this project? Go ahead and say yes and it will move the Events over too. So you might ask what about the events not already in a project? Well you can do the same thing down in the Event Browser too. Only you want to make sure iMovie knows you want to see all the hard drives attached to your computer not just the internal one. So there's an icon in the top right corner of the Event browser called Group Events by Disk. It has a cartoon icon of a hard drive on it. Just click it once to turn this on. You should now see the external hdd in the list. Drag all your Events onto that disk. So now for the moment of truth,. . .
Go up to your project browser and open up one of the projects FROM the external hdd and skim it, edit, add do something with it. Switch to a different project on the external try the same thing. Go down to the Event browser and check out some events on the External HDD as well. It should all be the same as it was on the Internal HDD. Last Step: Delete the now duplicate/original Events/Projects on the Internal HDD. You have perfect working copies on the external and do not need to keep the originals on the Internal HDD. Any time from this point forward you will only open Events/Projects from the external hdd and save back to that location. And iMovie will take care of the rest of it for you.

Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

Hello - I recently got Comcast Xfinity service. We had switched from a different service. Our wifi service was never great, but prior to Xfinity, it worked decently. But now that we have Xfinity, our wifi is much worse and very unreliable. I am seeking advice on how to setup my various Apple wifi devices in my home. I have attached a diagram that illustrates what I am dealing with. We have a large old house with stone walls. Comcast does not support this issue.
To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor. The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch. I already have ethernet cables running from the network switch in the basement to various locations throughout the house. So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices. The dark lines running from the network switch to the various devices represents ethernet cable.
The immediate problem that we are having is that we are unable to connect to our wifi networks. The networks show on my mac laptop and my iPhone, for example, but I am unable to connect. I know that I am inputting the correct password, but most of the time, we cannot get in. Sometimes we can..... Very frustrating! Also, due to the fact that I setup what I have over several years, I have multiple network names. I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
Here is what I am looking to accomplish:
1. Seamless wifi access throughout our house.
2. One name for our wifi network. Right now we have multiple names for multiple networks. Just want to simplify and have only one network. (I guess that an additional "guest network" would be ok, but not absolutely necessary.
Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this. Just tell me how to do so.
I have no idea how where to start or how to set this up. I imagine that I would need to disconnect everything and reset and start from scratch? Can someone tell me what I should do? Even general advice would be helpful, but the more specific, the better, given my limited understanding. Any help or advice would be greatly appreciated.
Thanks in advance!

Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

Hi,
I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
During the process, I faced some issue with the output server in printing the labels.
When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
The file is move to the error folder and an error file is getting generated which contains the error message as given below:
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
I also verified the license and it is a valid licence.
Kindly help me out in solving this issue.
Thanks
Senthil

I assume this is too late to help you, but other might need a hint. I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
Hope this helps anyone....
Vegard

Need help creating custom .swf skin and exporting for use

Please, can anyone help...
I am currently working on a projects that needs to have a custom flash skin player.
I have tried copying and editing excisting skins, but when I export the swf and fla into the crrect folders, I am able to select it from the skin list- however it doesn;t show in the player.
Am I exporting/publishing this in the correct way and to the right folders?
If anyone can give me a tip of how to achieve this that would be great, or a link to somewhere that may have the infor I'd be happy,
Cheers
Cliff

Hi,
Do you mean skinning FLVPlayback palyer?
Warm Regards
Deepanjan Das
http://deepanjandas.wordpress.com/

Need help for connecting Ms Acces with java Swing in Mac OS

Hi all,
i need to connect to Ms Access in MAc os through my java swing program.
Is it possible for accessing Ms access through dsn in Mac OS.
If Possible which driver shall i use for Establishing Connection with MS Access in Mac OS.
Suggestion is needed urgently.
Can anybody help me out regarding this..
Thanks in advance.
Regards,
sreand

if I don't find a better solution I'll try your 2nd option but what do you mean by "combo" update?
My understanding is to simply insert the OS 10.5 installation CD, reinstall the OS and the just keep updating it via the OS SSoftware update panel and stop untill I see the scary Java 8 update. Is that what you meant?
While you can do it that way, the combo update picks up operating system updates through a collection of releases. When dealing with operating system upgrades, I've found using the combo updates to be more reliable than Software Update, as sometimes Software Update doesn't apply updates correctly, and weird things can happen. Doesn't happen often though, thankfully.
So the OS X 10.5.5 Combo update contains all updates between 10.5.0 and 10.5. The 10.5.8 combo update contains the updates from 10.5 thru 10.8. Here are the updates:
10.5 combo update: http://support.apple.com/kb/DL692
10.8 combo update: http://support.apple.com/kb/DL866
If you go down the combo path, repair permissions before and after doing each update. Then do Software Update for any other non-OS X updates, and don't apply the Java Update 8.

Need help replaying a swf correctly with its music

Similar Messages

Maybe you are looking for