Need help resolving build Errors.
I get the following nasty error under application builder (see attached screen shot). Can anyone help me resolve this? SS
Attachments:
Build Errors.JPG 43 KB
Hi,
This is a common error. The first thing I would try it disabling "Disconnect Type definitions" under the Additional Exclusions section application properties. If you are using object oriented programming there might be a different issue. Let us know if the type definitions trick works.
Eric A.
National Instruments
Distributed I/O Product Support Engineer
Similar Messages
-
How to clear 150:30 error message in photoshop element 8.0
A quick Google yielded this link that was marked as a correct answer by someone else with PSE8 getting that error, although the messages are a couple years old so maybe you can’t get it to work on newer OSes:
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html -
Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."
Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.
Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.
-
Need help in building a utility...?
Gurus,
I need to build a dynamic selection screen for a utility that will extract data from a legacy database. I am not sure how to do it....I have the design in mind but will need help from you experts in the implementation.
So i need to have to twol radip buttons on the selection screen such that when one radio button is clicked then few other select options come on the screen and when the other radio button is selected then different select options come on the screen.
Once the user any of these two radio buttons and fill in the respective values for the parameters, then i have to fire native SQL queries on the legacy SQL database.
Any suggestions...
First i need to code the dynamic selection screen ....Your help will be appreciated...
ThanksPlease have a look at below link. May be helpful to you...[Dynamic Selection Screen|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a07a330f-126c-2910-c684-d2a45f0f37dd]
I hope it helps.
Best Regards,
Vibha -
TS3694 I need help to fix error message -69
I am having problem with syncing my ipod classic (160gb). I have this error message -69, that I need help with. I have already restored my ipod, but cannot add my anything (audiobooks-my music) to my ipod.
see if you have any friend have a Mac computer, do a restore there before syncing with your PC
-
Need Help!! Errors during Local Client Copy
Doing a Local Client Copy and getting these error messages in the log:
Table Name Component Package
/1CN/CMFSAPH0FOR DDIC Error (See SE14)
/1CN/CMFSAPH1FDT DDIC Error (See SE14)
/1CN/CMFSAPH1FFX DDIC Error (See SE14)
/1CN/CMFSAPH2TGR DDIC Error (See SE14)
/1CN/CMFSAPH2TRM DDIC Error (See SE14)
/1CN/CMFSAPH3TCT DDIC Error (See SE14)
/1CN/CMFSAPH3TUS DDIC Error (See SE14)
/1CN/CMFSAPH4TFX DDIC Error (See SE14)
/1CN/CMFSAPH4TQU DDIC Error (See SE14)
Then I go to SE14 then put the name of the tables then click CHECK >> DATABASE OBJECT and then as the result I get:
"Table is not created in the database"
If I go down to the database level and look within the Oracle database dba_tables the tables and objects exists within the database but SAP is unable to recognize them. All objects were imported with a Oracle Data Pump dump file and now I just need help in getting SAP to recognize the tables.
Edited by: Adam Gendle on Feb 19, 2010 12:29 AMHi,
Its showing inconsistency between ABAP Dictionary and the database.
Have you run Test-Run before performing actual client copy ?
Please check the Consistency of affected Tables.
SE11 -> Display Table -> Utilities -> Database Object -> Check
(check DB Object as well as Run time Object)
Please refer this [SAP Note 686357 - Table pool length incorrect after Unicode conversion|https://service.sap.com/sap/support/notes/686357] to get more information. The relevant solution is mentioned there if the pool tables having inconsistency with VARDATA field.
Also refer SAP Note 1171306 - Error with pooled tables when copying a client.
Regards,
Bhavik G. Shroff -
Need help asap with Error #2109!
Need major help in an error that is driving me crazy! I have a movie clip button, however, once you click on it the output will say:
ArgumentError: Error #2109: Frame label instance15 not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at index_fla::MainTimeline/goLabel()
i am new in flash and trying to learn as3. i've looked at what error this is but i cant get my head around it. what i m trying to do it if you click on a button, a swf file will load on the the page. but it is not loading and the error comes up!
my code is:
function goLabel(e:MouseEvent):void
gotoAndStop(e.target.name);
if anyone knows how to solve this problem please help! let me know if i need any other codes, but this should be it!
thanks. i am about to go bald.Do you have a frame on your timeline that is labeled as "instance15"?
The code you show will do nothing in the way of loading an swf.... gotoAndStop is a timeline command, not a file loading command. -
Need help correcting message error number
Hello, i need help correcting message number for running archiving test runs.
05.08.2011 08:31:42 Message number 999999 reached. Log is full BL 252 E
05.08.2011 08:31:42 Job cancelled after system exception ERROR_MESSAGE 00 564 A
Any help wopuld be appreciated.
Regards.Summary
Symptom
One or several database tables of the application log contain too many entries.
The following database tables belong to the application log:
- BALHDR (all releases)
- BALHDRP(< 4.6C)
- BALM (< 4.6C)
- BALMP (< 4.6C)
- BALC (< 4.6C)
- BALDAT (>= 4.6C)
- BAL_INDX (all releases)
Other terms
RSSLG200,
RSSLGK90,
SLG2,
application log,
log
delete,
performance
Reason and Prerequisites
The application log is a tool to collect, save and display logs.
Many different applications collect messages in the application log which contain information or messages for the end user. The application automatically log serves as a temporary storage for messages. The logs are written on the database but they are not automatically deleted.
There is no general procedure for switching the application log on or off. Some applications provide this option or they offer the option of reducing the number of entries created. (See Notes 91519, 183960, 141244).
The expiration date of application logs
A log usually has an expiration date, which is set by the application, that calls the 'Application log' tool. If the application log does not set an expiration date, the 'Application log' tool sets the expiration date as 12/31/2098 or 12/31/9999,depending on the release, which allows the logs to stay in the system for as long as possible. The end user cannot set the expiration date. The expiration date does not mean that logs which have reached that date will automatically be deleted. It is used to control the deletion of logs when you call the Deletion report. The DEL_BEFORE flag in the BALHDR table determines whether or not the log can be deleted even before the expiration date is reached.
DEL_BEFORE= SPACE means that the log can be deleted before the expiration date is reached. (Default value)
DEL_BEFORE='X' means that the log can only be deleted after the expiration date.
Solution
Deleting the logs of the application log.
Releases >= 4.6A:
=====================================================================
In Releases >= 4.6A, use Transaction SLG2.
On the selection screen you can restrict the amount of logs to be deleted:
The 'Object' and 'Subobject' fields specify the application area in which the logs were written (see F4 Help).
The 'External Identification' field specifies the number which was provided for this log by the application.
o If you also want to delete logs which have not reached the expiration date you must set the option "Also logs which can be deleted before the expiration date".
Select 'Help with application' in Transaction SLG2 for further explanation of the procedure for deleting.
SLG2 is a report transaction. The corresponding report is SBAL_DELETE. At regular intervals, this can be scheduled as a background job.
Releases < 4.6A:
=====================================================================
For Releases < 4.6A, note the following instructions:
In general, the deletion of application logs can be carried out in two steps:
1. Report RSSLG200: Deletion of all logs which expired:
Use report RSSLG200 to delete all logs whose expiration date is reached or exceeded. (This report is not yet available in the standard in Release 3.0F. In this case, the report can be installed in advance; see corrections attached to this note).
As of Release 3.1H, Report RSSLG210 is also available. This report allows the definition of a job that runs regularly and deletes such logs.
2. Report RSSLGK90: Deleting all logs for which a deletion is allowed before expiration:
Sometimes, step 1 does not delete enough logs. The reason for this might be that the expiration date of the logs is too far in the future or that no expiration date has been defined at all (in this case, depending
on the release, the assumed expiration date is 12/31/2098 or 12/31/9999)
Use report RSSLGK90 for these logs.
When you execute this report, you can restrict the logs to be deleted in a selection screen:
The fields 'Object' and 'Subobject' specify the application area which wrote the logs (see F4 help).
The field 'External number' indicates the number which was assigned by the application for this log.
Field 'Log class' indicates the importance of the log.
NOTE: By default, this field contains the value '4', this means only logs with additional information. If you want to delete all logs, enter the value '1' in this field. All logs with log class '1' or higher will then be deleted.
The fields 'To date' and 'Until time' refer to the creation date of a log.
If you enter 12/31/1998 and 23:59:59, you get all logs created in and before 1998
NOTES:
Client-dependency:
Note that the application log tables are client-dependent. Therefore, you must delete data in each client.
Which applications create entires in the application log:
To determine which applications create the logs, look in Table BALHDR to see which objects the logs were created for ( Transaction SE16, Table BALHDR, Field OBJECT). You can find the text description for the object in Table BALOBJT. The application is usually derived from the name and text of the object. The log is displayed in Transaction SL61. The display is restricted to certain objects, among other things.
Database error:
If very many data exists on the DB, Report RSSLGK90 might cause problems. In this case, implement Note 138715.
In very rare cases a dump is created even after Note 138715 was implemented:
ABAP/4 runtime error DBIF_RSQL_SQL_ERROR
SQL error 1555 occurred accessing table "BALHDR "
Database error text...: "ORA-01555: snapshot too old
If you cannot correct the error by means of database utilities, Note 368700 provides a way to bypass this error.
Report RSSLG200 can also run into problems. In this case, use the correction for Report RSSLG200 attached to this Note.
Expiration date in Report RSSLGK90:
There are logs on the database which may only be deleted explicitly after the expiration date (flag DEL_BEFORE = 'X' in table BALHDR). These logs are not deleted in advance by report RSSLGK90. Since, however, this flag is used very rarely, you can ignore this data.
Restriction of the quantity of log data by the application:
To avoid large quantities of logs from different applications, also refer to the following notes:
- 91519
- 183960
- 141244
Archiving logs:
As of Release 6.20, it has been possible to archive logs.
The logs are archived via archiving object BC_SBAL.
The archiving programs are started via Transaction SARA (archive administration).
Via Support Packages, the archiving of application logs has been made available for Releases 4.6C (SAPKB46C27), 4.6D (SAPKB46D17), and 6.10 (SAPKB61011) as well.
Header Data
Release Status: Released for Customer
Released on: 04.08.2005 13:55:45
Master Language: German
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-SRV-BAL Basis Application Log
Affected Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_APPL 30 30F 31I
SAP_APPL 40 40A 40B
SAP_APPL 45 45A 45B
SAP_BASIS 46 46A 46D X
SAP_BASIS 60 610 640 X
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Last
Modifcation
158903 30F 30F SAP_APPL 16.05.2000 07:13:08
162069 31H 45B SAP_APPL 16.05.2000 07:16:07
Related Notes
1009281 - LAW: Runtime error CONNE_IMPORT_WRONG_COMP_TYPE
856006 - Mass processing saves unnecessary logs
737696 - Add. info on upgrade to SAP R/3 Enterprise 4.70 Ext. 2 SR1
706478 - Preventing Basis tables from increasing considerably
637683 - Add info about upgrade to SAP R/3 Enterprise Core 4.70 Ext 2
587896 - Add. info on upgrade to SAP R/3 Enterprise Core 4.70 SR1
540019 - Report RJBTPRLO does not work correctly
400687 - Delete application log: DBIF_RSQL_INVALID_CURSOR
390062 - Additional information about upgrading to 4.6C SR2
370601 - Composite SAP note: APO 3.0 and 3.1 performance
365602 - M/AM: Sales agent determination log - perf.
327285 - Additions to upgrade to 4.6C SR1
183960 - ALE: Deactivating application logs for data transfers
141244 - Deactivating the application log during data transfer
138715 - RSSLGK90: Too many lock entries in the database
118314 - Installing the interface to a separate EH&S
91519 - Deleting logs of the application log
Print Selected Notes (PDF)
Attributes
Attribute Value
Transaction codes BALC
Transaction codes BALM
Transaction codes CLEAR
Transaction codes HIER
Transaction codes SARA
Transaction codes -
Need help determining compiling error
Good morning,
I need help finding the cause of a compiling error I receive. I have reviewed my code numerous times without any luck. I hope you guys might see something I am not! The entire file exceeds the limit I can post, so I am attaching it in 2 posts. Sorry for the inconvenience. The error and my code are posted below. Thank you for your help!
C:\StockTrackerDB.java:382: cannot find symbol
symbol : method add(java.lang.Boolean)
location: class java.util.ArrayList<java.lang.String>
aList.add(new Boolean(rs.getBoolean("admin")));
^
1 error
Tool completed with exit code 1
import java.io.*;
import java.sql.*;
import java.util.*;
public class StockTrackerDB
private Connection con = null;
//Constructor; makes database connection
public StockTrackerDB() throws ClassNotFoundException,SQLException
if(con == null)
String url = "jdbc:odbc:StockTracker";
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(ClassNotFoundException ex)
throw new ClassNotFoundException(ex.getMessage() +
"\nCannot locate sun.jdbc.odbc.JdbcOdbcDriver");
try
con = DriverManager.getConnection(url);
catch(SQLException ex)
throw new SQLException(ex.getMessage()+
"\nCannot open database connection for "+url);
// Close makes database connection; null reference to connection
public void close() throws SQLException,IOException,ClassNotFoundException
con.close();
con = null;
// Method to serialize object to byte array
private byte[] serializeObj(Object obj) throws IOException
ByteArrayOutputStream baOStream = new ByteArrayOutputStream();
ObjectOutputStream objOStream = new ObjectOutputStream(baOStream);
objOStream.writeObject(obj); // object must be Serializable
objOStream.flush();
objOStream.close();
return baOStream.toByteArray(); // returns stream as byte array
// Method to deserialize bytes from a byte array into an object
private Object deserializeObj(byte[] buf) throws IOException, ClassNotFoundException
Object obj = null;
if(buf != null)
ObjectInputStream objIStream = new ObjectInputStream(new ByteArrayInputStream(buf));
obj = objIStream.readObject(); //IOException, ClassNotFoundException
return obj;
// Methods for adding a record to a table
// add to the Stocks Table
public void addStock(String stockSymbol, String stockDesc) throws SQLException, IOException, ClassNotFoundException
Statement stmt = con.createStatement();
stmt.executeUpdate("INSERT INTO Stocks VALUES ('"
+stockSymbol+"'"
+",'"+stockDesc+"')");
stmt.close();
// add to the Users table
public boolean addUser(User user) throws SQLException,IOException,ClassNotFoundException
boolean result = false;
String dbUserID;
String dbLastName;
String dbFirstName;
Password dbPswd;
boolean isAdmin;
dbUserID = user.getUserID();
if(getUser(dbUserID) == null)
dbLastName = user.getLastName();
dbFirstName = user.getFirstName();
Password pswd = user.getPassword();
isAdmin = user.isAdmin();
PreparedStatement pStmt = con.prepareStatement("INSERT INTO Users VALUES (?,?,?,?,?)");
pStmt.setString(1, dbUserID);
pStmt.setString(2, dbLastName);
pStmt.setString(3, dbFirstName);
pStmt.setBytes(4, serializeObj(pswd));
pStmt.setBoolean(5, isAdmin);
pStmt.executeUpdate();
pStmt.close();
result = true;
else
throw new IOException("User exists - cannot add.");
return result;
// add to the UserStocks table
public void addUserStocks(String userID, String stockSymbol)
throws SQLException,IOException,ClassNotFoundException
Statement stmt = con.createStatement();
stmt.executeUpdate("INSERT INTO UserStocks VALUES ('"
+userID+"'"
+",'"+stockSymbol+"')");
stmt.close();
// Methods for updating a record in a table
// updating the Users table
public boolean updUser(User user) throws SQLException, IOException, ClassNotFoundException
boolean result = false;
String dbUserID;
String dbLastName;
String dbFirstName;
Password dbPswd;
boolean isAdmin;
dbUserID = user.getUserID();
if(getUser(dbUserID) != null)
dbLastName = user.getLastName();
dbFirstName = user.getFirstName();
Password pswd = user.getPassword();
isAdmin = user.isAdmin();
PreparedStatement pStmt = con.prepareStatement("UPDATE Users SET lastName = ?," + " firstName = ?, pswd = ?, admin = ? WHERE userID = ?");
pStmt.setString(1, dbLastName);
pStmt.setString(2, dbFirstName);
pStmt.setBytes(3, serializeObj(pswd));
pStmt.setBoolean(4, isAdmin);
pStmt.setString(5, dbUserID);
pStmt.executeUpdate();
pStmt.close();
result = true;
else
throw new IOException("User does not exist - cannot update.");
return result;
}// Methods for deleting a record from a table
// delete a record from the Stocks table
private void delStock(String stockSymbol) throws SQLException,IOException,ClassNotFoundException
Statement stmt = con.createStatement();
stmt.executeUpdate("DELETE FROM Stocks WHERE "
+"symbol = '"+stockSymbol+"'");
stmt.close();
// delete a record from the Users table
public void delUser(User user) throws SQLException,IOException,ClassNotFoundException
String dbUserID;
String stockSymbol;
Statement stmt = con.createStatement();
try
con.setAutoCommit(false);
dbUserID = user.getUserID();
if(getUser(dbUserID) != null) // verify user exists in database
ResultSet rs1 = stmt.executeQuery("SELECT userID, symbol "
+"FROM UserStocks WHERE userID = '"+dbUserID+"'");
while(rs1.next())
try
stockSymbol = rs1.getString("symbol");
delUserStocks(dbUserID, stockSymbol);
catch(SQLException ex)
throw new SQLException("Deletion of user stock holding failed: " +ex.getMessage());
} // end of loop thru UserStocks
try
{ // holdings deleted, now delete user
stmt.executeUpdate("DELETE FROM Users WHERE "
+"userID = '"+dbUserID+"'");
catch(SQLException ex)
throw new SQLException("User deletion failed: "+ex.getMessage());
else
throw new IOException("User not found in database - cannot delete.");
try
con.commit();
catch(SQLException ex)
throw new SQLException("Transaction commit failed: "+ex.getMessage());
catch (SQLException ex)
try
con.rollback();
catch (SQLException sqx)
throw new SQLException("Transaction failed then rollback failed: " +sqx.getMessage());
// Transaction failed, was rolled back
throw new SQLException("Transaction failed; was rolled back: " +ex.getMessage());
stmt.close();
// delete a record from the UserStocks table
public void delUserStocks(String userID, String stockSymbol) throws SQLException,IOException,ClassNotFoundException
Statement stmt = con.createStatement();
ResultSet rs;
stmt.executeUpdate("DELETE FROM UserStocks WHERE "
+"userID = '"+userID+"'"
+"AND symbol = '"+stockSymbol+"'");
rs = stmt.executeQuery("SELECT symbol FROM UserStocks "
+"WHERE symbol = '"+stockSymbol+"'");
if(!rs.next()) // no users have this stock
delStock(stockSymbol);
stmt.close();
// Methods for listing record data from a table
// Ordered by:
// methods that obtain individual field(s),
// methods that obtain a complete record, and
// methods that obtain multiple records
// Methods to access one or more individual fields
// get a stock description from the Stocks table
public String getStockDesc(String stockSymbol) throws SQLException, IOException, ClassNotFoundException
Statement stmt = con.createStatement();
String stockDesc = null;
ResultSet rs = stmt.executeQuery("SELECT symbol, name FROM Stocks "
+"WHERE symbol = '"+stockSymbol+"'");
if(rs.next())
stockDesc = rs.getString("name");
rs.close();
stmt.close();
return stockDesc;
// Methods to access a complete record
// get User data from the Users table
public User getUser(String userID) throws SQLException,IOException,ClassNotFoundException
Statement stmt = con.createStatement();
String dbUserID;
String dbLastName;
String dbFirstName;
Password dbPswd;
boolean isAdmin;
byte[] buf = null;
User user = null;
ResultSet rs = stmt.executeQuery("SELECT * FROM Users WHERE userID = '" +userID+"'");
if(rs.next())
dbUserID = rs.getString("userID");
dbLastName = rs.getString("lastName");
dbFirstName = rs.getString("firstName");
// Do NOT use with JDK 1.2.2 using JDBC-ODBC bridge as
// SQL NULL data value is not handled correctly.
buf = rs.getBytes("pswd");
dbPswd=(Password)deserializeObj(buf);
isAdmin = rs.getBoolean("admin");
user = new User(dbUserID,dbFirstName,dbLastName,dbPswd,isAdmin);
rs.close();
stmt.close();
return user; // User object created for userID
// Methods to access a list of records
// get a list of selected fields for all records from the Users Table
public ArrayList listUsers() throws SQLException,IOException,ClassNotFoundException
ArrayList<String> aList = new ArrayList<String>();
Statement stmt = con.createStatement();
ResultSet rs = stmt.executeQuery("SELECT userID, firstName, lastName, admin "
+"FROM Users ORDER BY userID");
while(rs.next())
aList.add(rs.getString("userID"));
aList.add(rs.getString("firstName"));
aList.add(rs.getString("lastName"));
aList.add(new Boolean(rs.getBoolean("admin")));
rs.close();
stmt.close();
return aList;
// get all fields in all records for a given user from the UserStocks table
public ArrayList listUserStocks(String userID) throws SQLException, IOException, ClassNotFoundException
ArrayList<String> aList = new ArrayList<String>();
Statement stmt = con.createStatement();
ResultSet rs = stmt.executeQuery("SELECT * FROM UserStocks "
+"WHERE userID = '"+userID+"' ORDER BY symbol");
while(rs.next())
aList.add(rs.getString("symbol"));
rs.close();
stmt.close();
return aList;
} -
Hello, im using this class to query a table from my database. everything is ok, but when i write the closing } of the Main class the Program gives an error. In the main class ive wrote here at the bottom, the main class has no ending } . Now only the final } gives an error but everything else is ok, ive double checked all brackets, they are all in good place, what is going wrong?
package DBandQueryHandler;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
class Main {
public static void main(String[] args){
Class driver_class=null;
try{
driver_class=Class.forName("com.mysql.jdbc.Driver"); }
catch(ClassNotFoundException e){
e.printStackTrace();
return;
System.out.println("Found Driver"+ driver_class);
Connection connection=null;
try{
connection= DriverManager.getConnection("jdbc:mysql://localhost:3306/....", ".....", "........");
catch(SQLException e){
e.printStackTrace();
return;
try{
System.out.println("Established connection to"+ connection.getMetaData().getURL());
catch(SQLException e1){
e1.printStackTrace();
Statement statement=null;
try{
statement= connection.createStatement();
statement.execute("SELECT * FROM KLANTEN");
Resultset resset= statement.getResultSet();
System.out.println("Row user_id, username, password, abbonement1, abbonement2, openstaand");
while(resset.next()){
System.out.println(resset.getRow());
System.out.println("" + resset.getSring("user_id"));
System.out.println("" + resset.getSring("username"));
System.out.println("" + resset.getSring("password"));
System.out.println("" + resset.getSring("abbonement1"));
System.out.println("" + resset.getSring("abbonement2"));
System.out.println("" + resset.getSring("openstaand"));
resset.close();
catch(SQLException e){
e.printStackTrace();
finally{
if(statement=null){
try{
statement.close();
catch(SQLException e){
e.printStackTrace();
if(connection=null){
try{
connection.close();
catch(SQLException e){
e.printStackTrace();
}javaboy2 wrote:
Like i said, when i write all brackets correctly, the program gives errors, but when i delete the the last bracket, the program doesnt give errors(except for the last bracket=> '}' expected). I dont understand this.
The errors of the program with correct amount of brackets are these: Yes, the errors come up with correct brackets because you have errors . When you take out the bracket, the structure is too bad so it doesn't look for the rest of the errors. This problem has absolutely nothing to do with brackets at all. That's why you needed to post the errors in your first post, rather than ignoring them and pretending your code is perfect and blaming it on brackets.
And these errors would be fixed if you read them.
Cannot find symbol ResultsetThat's because there is no class called Resultset. It's called ResultSet.
Your if statements are using assignment instead of equality
statement=null; //that assigns null to the statement object
statement==null; //that checks to see if statement equals nullAgain, read your errors. They don't lie. -
Need help - method call error cannot resolve symbol
My code compiles fine but I continue to receive a method call error "cannot resolve symbol - variable superman" - can't figure out why. Here is my code:
public static String caesar(String message, int shift)
{ [b]String result = "";
for(int i = 0; i < message.length(); ++i)
{ [b]char newChar = message.charAt(i + shift);
result += newChar;
return result.toUpperCase();
I entered "superman" for message and "3" for the shift. Can someone please help? Thanks!Your post worked great - especially since it made me realize I was going about it all wrong! I was attempting to convert "superman" to "vxshupdq" - basically a cipher shift starting at index 0 and shifting it 3 character values which would result in s changing to v. I restructured my code:
public static String caesar(String message, int shift)
{ [b]String result = "";
for(int i = 0; i < message.length(); ++i)
{ [b]char newChar = message.charAt(i);
result += (newChar + shift) % message.length();
return result.toUpperCase();
But it's displaying the result as a "60305041". How can I get it to display the actual characters? -
Need help resolving Web Cache upgrading error
I successfully installed 10g AS on top of my 9i AS (9.0.3) on a different Oracle home. Then I proceeded to run the Upgrade Assistant (iasua.bat). Everything went well except the upgrade of Web Cache failed. I'm only installing/upgradeing the J2EE and Web Cache. Any help would be greatly appreciated.
I'm running on XP SP2.
the following are the lines in iasua.log related to the error:
2007/04/04 21:10:22.890 GMT NOTIFICATION:1 Framework: Starting to upgrade WebCache.
2007/04/04 21:10:23.515 GMT ERROR:1 WebCache: Invalid element 'MULTIVERSIONHEADERSRULE' in content of 'CACHEABILITYRULE', expected elements '[SELECTORS]'.
2007/04/04 21:10:23.515 GMT ERROR:1 WebCache: Unable to upgrade file C:\Oracle\ora9ias\webcache\webcache.xml
2007/04/04 21:10:23.515 GMT NOTIFICATION:1 Framework: Finished upgrading WebCache with status: Failure.What that means is Silverlight can't find a required component.
When I clicked on the site, it loaded pretty slow but I got to see the login screen without error.
Either the expected dll is cached on my machine or you have an intermittent problem.
As I'm a some-time Silverlight developer I could well have necessary dll if they are standard components.
As an outside chance...
You could try clearing your cache in case it's a versioning issue.
Failing that, I suppose you could maybe install the Silverlight and blend sdk.
One thing you could easy try.
Does Silverlight work for you generally?
Follow the link on this page:
http://social.technet.microsoft.com/wiki/contents/articles/30387.silverlight-trouble-shooting-installs.aspx
If that errors then it's the install on your machine.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML -
Getting exception error - need help resolving please
I am getting the following exception when I try running a short program that user the Scanner object:
Enter a number in feet: Exception in thread "main" java.util.NoSuchElementException
at java.util.Scanner.throwFor(Scanner.java:817)
at java.util.Scanner.next(Scanner.java:1431)
at java.util.Scanner.nextDouble(Scanner.java:2335)
at FeetInchConvert.main(FeetInchConvert.java:27)
Here's the program I am running (which compiled w/o errors):
import java.util.*;
public class FeetInchConvert
// Prompt for feet and convert to inches.
// Next, prompt for inches and convert to feet.
public static void main(String[] args)
final double INCHES_IN_FEET = 12.0;
double feet, inches;
int wholeInches;
Scanner ourScanner = new Scanner(System.in);
System.out.print("Enter a number in feet: ");
feet = ourScanner.nextDouble();
inches = feet * INCHES_IN_FEET;
System.out.println("\n" + feet + " feet is " +
inches + " inches.\n");
System.out.print("Now, enter a whole number in inches: ");
wholeInches = ourScanner.nextInt();
feet = wholeInches / INCHES_IN_FEET;
System.out.println("\n" + wholeInches + " inches is " +
feet + " feet.");
I have installed Java 5.0 on my Windows XP Pro system. I'm thinking that something might be wrong with my configuration. I am using TextPad for development.
Can someone please help me out on this one?
Thank you!
MelissaThis is the configuration that works for me:
Click Configure
Click Preferences
Click Tools
Click Run Java Application
Command should be java.exe
Parameters should be $BaseName
Initial folder should be $FileDir
All of the checkboxes are unchecked.
Mark -
get the message every time I login - when firefox is installed and even after it has been uninstalled
Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
tt2 -
Hello,
I have completed the local folder, tesing server, and remote server setup correctly (i think so).
My testing setup and files shown below:
My local folder for site shown below:
My advanced settings shown below:
I have downloaded all the files to the local folder from my remote server which are working fine on the live website http://www.caremoreconstruction.co.uk.
No layouts of the files/folders etc have been changed, I simply moved them over from the FTP server in to local folder I had created.
Just to confirm I have XAMPP installed and Apache runnining.
When I open DW CS5 and select the index.php file form the FILES tab, the main home page opens up and I little bar comes up at the top and says "This page has server proccesing directives that design view cannot display. Switch to Live View".
So I click on Live View and the home page loads up. I then press ctrl and click one of the links. (See picture below)
For some reason I am getting the following error message when I click on my links.
Object not found!
The requested URL was not found on this server. The link on the referring page seems to be wrong or outdated. Please inform the author of that page about the error.
If you think this is a server error, please contact thewebmaster.
Error 404
localhost
12/30/10 11:58:51
Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1
Please can someone help me!!
Regards
JamesDavid,
This is the responce I have had from my website designer.
Happy new year to you also. Re Dreamweaver it’s not a tool we use I’m afraid, we generally use tools like Netbeans and code oriented text editors so I’m not best placed to advise on the config of it. I have used it back in 2003, it’s a great development platform, but I just ended up working with other tools.
Looking at the post though, you seem to have got the site running but the issue seems to be the friendly URLs. As David correctly identified, .htaccess and mod_rewrite are used to effect this. If you don’t have the correct .htaccess file in place this aspect of the navigation won’t work. You should also be running the site from the root directory – both the production (live) website and our development environments are setup in this way, so though I don’t think we implement root relative URIs in the site navigation, I can’t say there won’t be issues running it in a subdirectory off http://locahost without reviewing all the code, which I haven’t.
The .htaccess file you need is on your live website, but many FTP clients will not display this by default, so your FTP download may have missed it.
You can create it yourself, it needs the following directives. The “.” on the front of the filename is very important.
RewriteEngine On
RewriteBase /
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^(.*)$ index.php/$1 [L]
That should solve your navigation issue, providing the Apache mod_rewrite module is enabled. If it doesn’t I can’t really help you further, other than to suggest you get a second hosting account online. I seem to think you can use a remote development environment in Dreamweaver. The advantage here is that you’ll have an environment that you know to work, with all the components installed. No disrespect, but even we can spend ages configuring our development servers to work as we need, and much depends on the installation approach you use in setting up Apache, PHP and MySQL
Re the database, as David has sussed there is no MySQL database to concern yourself with. Other red herrings include login and register handlers which are not implemented. Your original brief included the possibility of a customer login to access your quotes & progress reports down the line, so we allowed for that in the initial build and planned for MySQL access but didn’t implement those features.
Hope that helps. Great to see how far you’ve come with this – I probably couldn’t get as far building in the same time! Also glad to see that the comments re the code and structure are good – it’s always interesting to see what another developer, who obviously knows his stuff, thinks of your code!!
Regards
Oliver Phillips
http://www.eantics.co.uk
OMG ITS WORKING NOW!!!!!
1. Move all files and folders for the website to the main root directory http://localhost/
2. Open notepad and copy/paste code above in to note pad.
3. Click Save As from files menu. Change save format to all files and call it .htaccess (dont forget to put the ''.'' before htaccess)
4. Move .htaccess file to the root directory of the local/testing site.
and that's it!
There is just one small problem, I have had to move the XAMPP folder out of the root directory http://localhost for the links to work in DW CS5. When I first tried the link on my home page (both in DW CS5 and Browser) it redirected me to the XAMPP home page.
I think the solution for this would be to put XAMPP back in http://localhost/xampp and move website file and folders to vhost.
Maybe you are looking for
-
Im facing a problem in standard SAP functionality in MB03 - while Navigating to the delivery document ( Menu path : Environment -> Delivery ) . For the material documents that are created in 2007 but posted in 2006 , system throws an error message t
-
Does P35 Neo2 FIR have Wake-On-Lan support?
I just got a P35 Neo2 FIR but I can't seem to wake it up from the LAN. Does it have WOL-support?
-
This display does not support HDCP
Hi To help Sky with this issue, would you be able to let us know the following? Have you been able to fix it - if so, what did you do to fix it? Your Sky+HD box model number (Services > Settings > Details) The make & model of TV Other than your Sky
-
Hi i have created a report, which has some account dimensions and it has 11 level as default hierarchy i need to show from level 04 in my report , so i have taken level 04 and rest of the levels in query and enabled the drill option, now what happens
-
Live Video editing using Augmented Reality
I saw Disney "i am in a band" video. I have a similar project in augmented reality based on enhancing retail experience. I was having difficulty in finding action script code and if anyone of you can provide me with it for live video editing (spec