Need help rotating photo in slide show...buttons aren't highlighted

I'm trying to create a slide show in Photoshop Elements 5.0. For some reason some of the pictures are showing up in my slide show with the wrong orientation. When I click on the picture, the buttons on the right side that allow you to rotate and do more editing won't highlight. Any tips would be helpful. Thanks!

Some questions to hopefully help us understand what is happening -
What is the file format of the files where photo shows in the wrong orientation and the buttons to rotate and edit are not available? - For example - are they jpg or psd or tif ? Are these portrait photos that are shown laying on their side?
Did you add these photos to the slide show from the Organizer or from a Windows folder? Some people have reported that not all functions are available to them when the photo is added to the slide show from a Windows folder.

Similar Messages

  • Need Help Adding Music to Slide Show - PS Elements 11

    I am using PS Elements 11 to create a slide show. The photos and transitions are complete. But when I try to add music in an mp3 format, the songs are there but the text for the songs does not appear in the bar below the photos in the slide show review mode. All I can see is a fuzzy gray line. I need to see the text for the songs so I can trim and reorder the songs. I have tried to create a new slide show with new music but the music area is also fuzzy. Texts appeared one time but no longer. Please help! Need for Wed.!!!!

    Welcome to the forum.
    As Mylenium points out, this is not the Photoshop Elements Forum.
    I will Move your post to the PSElements Forum, where you will get the answers to your question.
    Good luck,
    Hunt

  • Need Help Intergrating a Flash slide show

    I'm fairly new with Dreamweaver and was doing fine with
    building my site until I got to learning how to "Integrate a Flash
    slide show". I purchased Adobes "Classroom in a Book" and it has
    been an extreme help but once I got to that chapter of the book it
    doesn't work when my site is published. I followed all the
    instructions in the book and it looks good and works fine within my
    site when I do a test but when I publish it to the web nothing
    comes up, it is just a blank spot where the Slideshow is suppose to
    be. This is how my code looks, please if anyone can help to see if
    I'm doing something wrong:
    code
    </script><noscript>
    <object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
    width="500" height="200">
    <param name="flash_component" value="ImageViewer.swc"
    />
    <param name="movie" value="slideshow.swf" />
    <param name="quality" value="high" />
    <param name="FlashVars"
    value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',showC ontrols:false,frameShow:false,slideDelay:4,captionSize:10,captionColor:#333333,titleSize:1 0,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:true,imageURLs:['redguy.jpg','go ldgun.jpg','jawbone.jpg'],slideLoop:true,frameThickness:0,imageLinks:['
    http://macromedia.com/','http://macromedia.com/','http://macromedia.com/'
    />
    <embed src="slideshow.swf" quality="high"
    flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',s howControls:false,frameShow:false,slideDelay:4,captionSize:10,captionColor:#333333,titleSi ze:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:true,imageURLs:['redguy.jpg' ,'goldgun.jpg','jawbone.jpg'],slideLoop:true,frameThickness:0,imageLinks:['
    http://macromedia.com/','http://macromedia.com/','http://macromedia.com/'
    pluginspage="
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
    type="application/x-shockwave-flash" width="500" height="200">
    </embed>
    </object>
    </noscript>
    Please help!!!
    Thank you.

    First of all, it shouldn't be inside the <noscript> tag
    see
    http://www.w3schools.com/tags/tag_noscript.asp
    for an explanation.
    Once you fix that, make sure you upload any dependent
    files—i.e. slideshow.swf & any javascript files that may
    have been generated by DW.
    If it still doesn't work after you've taken those steps, then
    post a URL to the page in question. It's virtually impossible for
    anyone to help you when they can only see part of your code.
    Bev

  • AppleTV: How can I see what song is playing if I am viewing my photos in slide show mode on Apple TV and streaming from my iTunes?

    How can I see what song is playing if I am viewing my photos in slide show mode on Apple TV and streaming music from my iTunes?
    Thanks.

    Thank you Winston. I guess we need to ask that this feature gets added at least as an option in an upcoming release. When someone is using shuffle, it helps to know what is playing while viewing pictures.
    Where is my Apple request button when one needs it ? :-) Cheers, C

  • I need help importing navigation bars and rollover buttons from fireworks?

    I need help importing navigation bars and rollover buttons from fireworks, drop down menus and rollover states won't work!
    Thanks

    In my experience, the code created by graphics apps is less than satisfactory. And image based menus are very awkward for several reasons. 
    #1 If you decide to change your menu later, you must go back to your graphics app and re-craft the whole thing.  After 2-3 times of this, it gets old in a hurry.
    #2 Image based menus cannot be "seen" by search engines, screen readers and language translators.
    #3 CSS styled text menus are better for your site's visibility, accessibility and they are a snap to edit in Dreamweaver.
    That said, if you're still married to image based menus, use Fireworks to create images only. Use Dreamweaver's Image Rollover Behaviors to create your rollover scripts.
    Nancy O.

  • I need help finding photos just downloaded to Lightroom...they only show up in "previous downloads" and not in a folder in my pictures

    I need help finding phots just downloaded to lightroom...they only show up in "prevoious downloads" and not in a folder in my pictures.  what can I do to correct this?

    Also, please be aware that Lightroom is not a file browser like your operating system Finder or Explorer is. If the photos are not in the folder you expected them to be in, it is because you (accidentally) imported them into a different folder.

  • Full Screen Photos In Slide Show & Other Questions

    Hi - I'm using Premiere Elements 4. I have a few questions since I'm new to using the program. First of all, how do I get the photos to take up the whole screen (instead of showing a black border) when they are played back? They were taken on a 7.2 megapixel camera at the maximum quality setting. Also, the resolution is bad when it's played back but fine when you see the preview of the photos in the program. I've seen other posts about needing to change the resolution but I was wondering if I got the photos to play full screen if that might fix my problem because I can play the photos as a slide show in the Windows Photo Gallery Program and the resolution is perfect and the photos take up the whole screen.
    Secondly, how do I delete a menu from the Disc Menus Section? Also, how would I delete the "Scene Selection" button from the menu screen that I want to keep? I want to be able to have a menu with just a "play all" button.
    Thanks for your help.

    The only way to remove Scene Menu button from Disc Menus is to physically remove it from the template by editing it (They're PSD files) in Photoshop Elements.
    As for photos, DO NOT use photos from that 7.2 megapixel camera at full resolution, niagara. It's a sure recipe for disaster. RAther, per the FAQs at the top of this forum, rez those photos all down to no larger than 1000x750 pixels in size.
    http://www.adobeforums.com/webx/.3bb8822c
    That done, you can get your photos to fill your screen one of two ways:
    a) Leave the Default to Frame Size option checked in your preferences. The only case in which this won't work is if you're using 4:3 photos in a 16:9 widescreen project.
    b) If this is the case, go to Edit/Preferences and uncheck Default to Frame Size BEFORE you import that photos into your project. (It won't work if you do it after.) Then, after placing each photo on your timeline, right-click on each, select Show Properties and, in Properties, open Motion and set Scale to 85%. Note that, because your photos and the widescreen have different aspect ratios, you will lose some of the vertical off the tops and bottoms of your photos.
    There are many more ways to do it -- but it all depends on what you're trying to accomplish.

  • Need help putting photos on my iPad

    Trying to put scanned photos on my iPad. I have tried iTunes but under devices there is no photos to select. Need help.

    Photos doesn't appear on the left-hand sidebar under Devices, it appears on the right-hand side in a similar way as for selecting and syncing music, apps etc
    If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
    To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
    If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

  • Photo gallery slide show - automatic start

    I have created a web photo gallery in Adobe Bridge and successfully
    opened it in my Dreamweaver site, but I want to the slide show to start automatically because it is on my
    first page and I don't want people to have to click on the play button. Can someone tell me if this can be done and if so, how?
    Thanks

    Hi,
    I will gladly help you with your problem but please give me a
    link to your gallery wither as a private message or by email
    ([email protected]). The files here pasted are incorrect, look to
    the SetSlideShowTimer() or the StartSlideShow() functions above
    that are incomplete. Not mentioning that the CSS are really make
    the difference.
    It will take me more time to try to reconstruct your
    structure, not having all the files you reference and probably not
    being able to duplicate your problem because the deployment
    failure.
    Cristian

  • Need Help for Nokia 6500 slide

    Hi all I'm A new Guy here ,
    But I do really need help for hard reset my phone
    I already try *#7073# But It doesn't work ,
    If Anybody know to make a hard reset please help

    rwss wrote:
    I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
    to hard reset the 6500 Slide?!
    How does the 6500 slide hard reset?
    That's simple.
    All you have to do is:
    From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
    There are two options in there:
    "Restore Settings only"
    and
    "Restore all"
    Select "Restore All"
    When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
    and also restore phone to its original settings and will restart.
    This proceedure is mostly common on S40 phone.
    Hope this explain and solve the problem.

  • Newbe requests help with audio for slide-show on Premiere Elements 4.

    I recently wrote you regarding a problem I was having with a slide show I was making on Premiere Elements 4 importing photo clips and music from PhotoShop Elements 9.  Thank you for your help.
    This very large slide show, some 200 clips that I have not resized is completed.  I am now having many problems with the music audio I am adding to various sequences of the slide show.  Specifically:the audio will not stay fixed on the places where I put it and end it.  Working on the Timeline Usually the length of the audio is shorter than the ending of the photo clips where it must go.  I click on the audio and stretch it and end it at the place I designate.  However, the other end has moved also so now I am left with a gap where there is no audio at the beginning of the segment.  Now in addition, the "Delete and Close Gap" does not work most of the time causing me to manually move the photo tiles which sometimes move when this happens.  I have to move each one or two individually to the left to close the gap and many times this causes loss of one or two photo tiles or they are out of order or have increase in number (of the one I am moving).
    The program has also shut down for the past 10 days causing me to lose a good deal of work and sometimes photo clips and sometimes I get many duplicates of the photo clips.  All I do is edit mostly the same two segments doing this over and over because I can't proceed to importing any more music because I can't get the first segments correct.  I have chatted with you people, Sony techs, Microsoft Techs and Canon Techs.  The Sony techs suggested the program was at fault and I used the original installation disk and repaired the program.  It has still shut down on me but not as much.
    I got error messages on the photo-cap instructions page you suggessted otherwise I would show pictures of the above problems.
    I tried to copy and/or cut and paste from the Timeline thinking I would start a new slide show in PhotoShop Elements 9 using the same photos in reverse.  The program would not let me copy or paste.  There is great difficulty in highlighting the photo tiles in Timeline because I have to shift click on each individual tile and there are too many tiles and it would take too long to get a whole segment copied.  Maybe you know another way to do this?
    I am at a stand-still now and I am quite despondent because I have been working on this slide-show for 3 months and it was a surprise for my daughter's 25th anniversary that was last Tuesday.
    I do hope you have some good suggestions that will lelt me complete this Project and get it on a disk.  I am not that technical so please be specific.
    Thanks in advance.
    Kathy

    Here's the basic advice I'd give, based on my experience. Much depends, though, on your goals and the specifics of your computer system:
    1) Resize all of your photos to no larger than 1000x750 pixels in size. This is VITAL if you want the program to maintain stability as you work. Also render often (by pressing the Enter key). When the render, the red lines above the clips on your timeline will turn green and the program will run much more efficiently.
    2) Work on your large slideshow project in shorter segments. You've got over 15 minutes worth of slides. Try working on this slideshow in 5 minute segments, output each segment and then combined the finished videos.
    3) Use only WAV audio as your music and audio for your slideshow.
    4) When you add video, audio or stills to a parallel track on your timeline, hold down the Ctrl key to override the ripple function and your current clips will remain in place.
    5) Maintain your computer by using a tool like the excellent, free, one-click Advanced System Care available at http://www.iobit.com/advancedsystemcareper.html
    As for Delete and Close Gap, how it performs depends on whether you've selected Clear or Delete, whether you've pressed the Backspace key or the Delete key and if there is video or audio on a parallel track. (This is all covered in my books, by the way, if you're interested.)
    Without knowing the specifics of your project and your situation, it's hard to give out more specific information -- but this advice should get you a long way toward completing your project!

  • Can't get photo gallery slide show to work

    Hello,
    If anyone could help, I'd appreciate it. This is for a
    non-profit I work for. After getting the gallery to work, I can't
    get the slide show to work.
    from my gallery.html:
    <title>Photo Gallery</title>
    <link href="../css/screen.css" rel="stylesheet"
    type="text/css" />
    <script type="text/javascript"
    src="includes/xpath.js"></script>
    <script type="text/javascript"
    src="includes/SpryData.js"></script>
    <script type="text/javascript"
    src="includes/SpryEffects.js"></script>
    <script type="text/javascript">
    var dsGallery = new Spry.Data.XMLDataSet ("photos.xml",
    "gallery/photos/photo");
    var dsData = new
    Spry.Data.XMLDataSet("photos.xml","gallery");
    </script>
    <script src="gallery.js" type="text/javascript">
    </script>
    <script src="SpryMenuBar.js" type="text/javascript">
    </script>
    <style type="text/css">
    #main (I'm not incl. details for these - to save space)
    #thumbContainer
    #controls
    #header
    </style>
    </head>
    <script type="text/javascript">
    </script>
    </head>
    <body>
    <div id="header" spry:region="dsData">
    <p>{sitename}<br />
    </div>
    <div id="thumbContainer" spry:region="dsGallery">
    <img src="thumbnails/{@thumbpath}"
    spry:repeat="dsGallery" class="thumbs"
    spry:setrow="dsGallery"/> </div>
    <div id="main" spry:detailregion="dsGallery">
    <img src="images/{@path}" class="images"/>
    </div>
    <div id="controls">
    <ul id="transport">
    <li><a href="#" onclick="StopSlideShow();
    AdvanceToNextImage(true);"
    title="Previous">Previous</a></li>
    <li class="pausebtn"><a href="#" onclick="if
    (gSlideShowOn) StopSlideShow(); else StartSlideShow();"
    title="Play/Pause" id="playLabel">Play</a></li>
    <li><a href="#" onclick="StopSlideShow();
    AdvanceToNextImage();" title="Next">Next</a></li>
    </ul>
    </div>
    <div id="thumbContainer" spry:region="dsPhotos
    dsGallery">
    <p class="ClearAll"></p>
    </div>
    </div>
    <p class="clear"></p>
    </div>
    </body>
    </html>
    Here's the gallery.js file: (didn't include the global vars -
    to save space)
    dsGallery.addObserver(function(nType, notifier, data) {
    if (nType == "onPreLoad")
    StopSlideShow();
    Spry.Data.Region.addObserver("thumbContainer",
    function(nType, notifier, data) {
    if (nType == "onPostUpdate")
    ShowCurrentImage();
    if (gAutoStartSlideShow)
    StartSlideShow(true);
    function SetMainImage(imgPath, width, height, tnID)
    var img = document.getElementById("mainImage");
    if (!img)
    return;
    CancelBehavior("mainImage");
    Spry.Utils.SelectionManager.clearSelection("thumbnailSelection");
    if (tnID)
    Spry.Utils.SelectionManager.select("thumbnailSelection",
    document.getElementById(tnID), "selectedThumbnail");
    if (gImageLoader)
    gImageLoader.onload = function() {};
    gImageLoader = null;
    gBehaviorsArray["mainImage"] = new Spry.Effect.Opacity(img,
    Spry.Effect.getOpacity(img), 0, { duration: 400,
    finish: function()
    gBehaviorsArray["mainImage"] = new
    Spry.Effect.Size(img.parentNode,
    Spry.Effect.getDimensions(img.parentNode), { width: width, height:
    height, units:"px"}, {duration: 400,
    finish: function()
    gImageLoader = new Image();
    gImageLoader.onload = function()
    img.src = gImageLoader.src;
    gImageLoader = null;
    gBehaviorsArray["mainImage"] = new Spry.Effect.Opacity(img,
    0, 1, { duration: 400,
    finish: function()
    gBehaviorsArray["mainImage"] = null;
    if (gSlideShowOn)
    SetSlideShowTimer();
    gBehaviorsArray["mainImage"].start();
    gImageLoader.src = imgPath;
    gBehaviorsArray["mainImage"].start();
    gBehaviorsArray["mainImage"].start();
    function CancelBehavior(id)
    if (gBehaviorsArray[id])
    gBehaviorsArray[id].cancel();
    gBehaviorsArray[id] = null;
    function SizeAndPosition(id, toX, toY, toWidth, toHeight,
    callback)
    CancelBehavior(id);
    var effectCluster = new Spry.Effect.Cluster( { finish:
    callback } );
    var ele = Spry.Effect.getElement(id);
    var moveEffect = new Spry.Effect.Move(ele,
    Spry.Effect.getPosition(ele), { x: toX, y: toY, units: "px" }, {
    duration: 400 });
    var sizeEffect = new Spry.Effect.Size(ele,
    Spry.Effect.getDimensions(ele), { width: toWidth, height: toHeight,
    units: "px" }, { duration: 400 });
    effectCluster.addParallelEffect(moveEffect);
    effectCluster.addParallelEffect(sizeEffect);
    gBehaviorsArray[id] = effectCluster;
    gBehaviorsArray[id].start();
    function GrowThumbnail(img, width, height)
    Spry.Utils.addClassName(img, "inFocus");
    img.style.zIndex = 150;
    var id = img.getAttribute("id");
    var twidth = Math.floor(width * .75);
    var theight = Math.floor(height * .75);
    var tx = (gThumbWidth - twidth) / 2;
    var ty = (gThumbHeight - theight) / 2;
    SizeAndPosition(id, tx, ty, twidth, theight,
    function(b){gBehaviorsArray[id] = null;});
    function ShrinkThumbnail(img)
    Spry.Utils.addClassName(img, "inFocus");
    img.style.zIndex = 1;
    var id = img.getAttribute("id");
    SizeAndPosition(id, 0, 0, gThumbWidth, gThumbHeight,
    function(b){gBehaviorsArray[id] = null;
    Spry.Utils.removeClassName(img, "inFocus");});
    function ShowCurrentImage()
    var curRow = dsGallery.getCurrentRow();
    SetMainImage(dsGallery.getCurrentRow()["@base"] + "images/"
    + curRow["@path"], curRow["@width"], curRow["@height"], "tn" +
    curRow["ds_RowID"]);
    function AdvanceToNextImage(moveBackwards)
    var rows = dsGallery.getData();
    var curRow = dsGallery.getCurrentRow();
    if (rows.length < 1)
    return;
    for (var i = 0; i < rows.length; i++)
    if (rows
    == curRow)
    if (moveBackwards)
    --i;
    else
    ++i;
    break;
    curRow = rows;
    dsGallery.setCurrentRow(curRow["ds_RowID"]);
    ShowCurrentImage();
    function SetSlideShowTimer()
    function KillSlideShowTimer()
    function StartSlideShow(skipTimer)
    gSlideShowOn = true;
    if (!skipTimer)
    SetSlideShowTimer();
    var playLabel = document.getElementById("playLabel");
    if (playLabel)
    playLabel.firstChild.data = "Pause";
    function StopSlideShow()
    gSlideShowOn = false;
    KillSlideShowTimer();
    var playLabel = document.getElementById("playLabel");
    if (playLabel)
    playLabel.firstChild.data = "Play";
    function HandleThumbnailClick(id)
    StopSlideShow();
    dsGallery.setCurrentRow(id);
    ShowCurrentImage();
    Thank you.

    Hi,
    I will gladly help you with your problem but please give me a
    link to your gallery wither as a private message or by email
    ([email protected]). The files here pasted are incorrect, look to
    the SetSlideShowTimer() or the StartSlideShow() functions above
    that are incomplete. Not mentioning that the CSS are really make
    the difference.
    It will take me more time to try to reconstruct your
    structure, not having all the files you reference and probably not
    being able to duplicate your problem because the deployment
    failure.
    Cristian

  • How do I rotate the entire slide show canvas?

    I have a slide show that will ultimately be in portrait mode (1125 x 1500), but it needs to be built in a landscape mode with everything rotated and then the actual porjector will be turned to be projected on a portrait screen. Stupid, I know.
    How can I build this in portrait mode and then rotate everything at the end?
    Thanks!

    There is no such thing. You will have to adjust the artboard and then manually rotate the content to fit.
    Mylenium

  • Need help deleting photos!

    I have a "new" ipad (3) and when my son came home from his trip abroad, I decided to try my camera connection kit. I copied all his photos from his cameras memory card to my ipad so we could sit down and look at them all.  I left them ont he ipad so I could show them to other family members, but its now been a couple months, and I wanted to delete them all. I couldn't - no option whatsoever. But I was told this was a known limitation with ios 5, and would be fixed in 6 -
    So I've now had 6 on my ipad for a couple days, and I still can't figure out how to remove these couple thousand photos. I need to handle it from my ipad - I gave my niece my macbook pro to take to college a couple weeks ago, so I do not have easy access to a computer (until now, I was convinced that my ipad would be all the computer I needed, but right now, it's feeling much more like a toy.)
    I would prefer an app that is easily available from the store, but I can't find one.  I had not considered jailbreaking my ipad until now IF there is a way to easy handle files once thats done. Failing those, I would be happy to do it from a mac ( but the photos do NOT show up in itunes or iphoto - I looked) and would even consider a PC purchase if it is the most efficient way to manage files on my ipad. I do not want to wipe my ipad completely, as I have been running my 2 businesses on it, and this makes me concerned that even my iCloud backups, many other important files and photos could be incomplete or lost.
    Can anyone help? Any ideas or suggestions? I am having a hard time believing Apple made it so easy to copy massive numbers of files onto an ipad, and offer no way to delete them -

    Can you manually inside iTunes, under the 'Photo' tab to select none or something similar? So the next time you sync and update your iPod, those photos will be gone??
    Cheers

  • Flash slide show - buttons working on edit modus, not on the scene

    We have made a slide show of pictures scrolling down on the
    right side of the screen. We converted the slideshow to a movie
    clip. The pictures in the slide show are also buttons. When you
    click on a button (small picture), a big sample of the picture
    should be loaded on the scene, for this we use the LoadMovie
    command. But when I tried to put action on the buttons, the action
    didn't act on the scene, but on edit level since the movie clip
    became kind of a nested symbol.
    Do we have to copy and paste the frames (for the slideshow)
    back to the scene and get rid of the movie clip symbol? Or are
    there anything else we can do to solve the problem?

    Thankyou for trying to help.
    Yes, I guess that is the problem, it doesn't know where to
    load the picture, and starts a new window. I have tried several of
    the different global properties, but so far with no success. I also
    tried your suggestion, twice _parent, but it didn't work.
    I would be glad to upload the FLA file, but how do I do it?
    Should I use my normal mail system, or is there a way of doing it
    here? The filesize is 2.7 MB.

Maybe you are looking for