Need Help Setting Up a new Network ..

Hello 
Newbie question, I am attempting to setup a small home network, where I want three WLANS
Main
Guests
Kids
I want to set up different policies for these three networks. 
I want the Kids to be able to access the Media server and other network devices, but limit the internet access. I want guest network to not be able to see the other two networks. 
I have an ISA550 Firewall a 2504 Wireless Controller and a SG300-28P Switch. 
I did manage to setup the Vlans on the ISA550 - Default as 192.168.75.x , Guest as 192.168.25.x and Kids as 192.168.35.x 
From here on - I would need some help setting it up the right way, Please help. 
Thanks

rmunoz274 wrote:
I had to call Verizon and spend an hour on the phone, my Versalink is about 3 years old and I never updated it. There is a software update which makes it a little more mac friendly. Cables still run through it on the Ethernet port. I was able to turn the wireless feature off on the Versalink (to stop my neighbors and kids from bypassing the APE and just factory reset the APE and set it up with a shared IP adrs instead of bridging it. Also made sure I turned off the guest network on the APE. Once it was set up I clicked on Airport in the Airport Utility then wireless Clinets, jotted down the client I wanted to restrict access to (Kid's Laptop) then go back to Airport screen, last option on right Access then MAC Adrs Access Control change to "Timed Access", then click the + on the bottom of the window, type the MAC adrs you want to restrict and set time limits, when complete click done..... Only took me a week and a half to figure it out...... Good luck, if that doesn't help let me know, but I'm no expert...
thanks!!
i think i have the most recent 327w update, because it now shows my modem screen in a red color and it is broken into 3 sections across the screen.
as far as the AEBS is concerned, you did not use it in bridge mode at all?
i thought you had to connect 1 cable from it to the 327w? I have about 5 items i will be connecting, so i will probably run any wired from the AESB, but not sure yet?
thanks, and yaeh last time my network took me a bit of time as well!!
what kind of encryption are you running?
thanks

Similar Messages

  • Need help setting up wireless internet network

    I have a 1 GHz iMac G4 (purchased in 2003) that has a dsl connection to the internet via an ethernet cable and the dsl modem that was provided by my internet service (earthlink). My friend recently gave me her imac - same model. I've given it to my son for his room and would like to set up a wireless network so I can get his computer on the internet too.
    I've read enough here to figure out that our computers are compatible with the AirPort Extreme card. But what other equipment do I need? How many Airport Extreme cards? an AirPort station?, a router? I'm clueless but very good at following instructions. So if there is an FAQ somewhere that would be helpful too.
    Thanks!

    Sarah, Welcome to the discussion area!
    You need a wireless router. You can use one of Apple's or a 3rd party wireless router.
    You can connect one of the iMacs to the router via Ethernet if you want. Or you can add AirPort Extreme cards to both iMacs.

  • Need help setting up a new k7n420 pro

    I just purchase the following for a budget computer and would like to know what procedures I should use to install the hardware with special attention to software and drivers.  I plan on using Windows XP Home + SP1 and the following:
    MSI K7N420 Pro ($67)
    Codegen Case with AMD approved 400 Watt PS ($63)
    1 x 256 Crucial PC2100 ($56)
    AMD Athlon XP 1800+ Retail ($74)
    Onboard graphics and sound for setup
    Sony CD-RW 48 x 24 x 48 CDU215A1 ($46)
    32X CD-ROM from old computer
    1.44 Floppy from old computer
    6.4 GB HD from old computer
    I plan on getting the following in the next week or two:
    AGP CARD
    -Geforce4 TI4200
    -Geforce3 TI200 or TI500
    -ATI Radeon 8500LE
    -ATI Radeon 9000 Pro
    and a
    40 or 60GB Maxtor 7200 RPM Drive
    any suggestions we the following requirements:
    The most value for the littlest amount of money.  Must support DX8.1.  I have $310.00 in the parts right now and don't really want to go over $450.00.
    Back to setup.  I need help with the order to install drivers and software and versions.  In addition, were can I get these versions.  Emphasis on stable computer,  I don't game very much but will venture into a few flight simulators soon.
    Any help greatly appreciated
    David Thomas

    David,
    The only change would be the Power Supply.  Get if you can an Antec TruePower.  You can get a True330W for around $55.00 and it is well worth it if you are going to upgrade from onboard graphics in the next week or so.
    The GeForce4 Ti4200 is the best bang for the buck at them moment, and they are getting hard to find in the 64Mb 4X Version.  If you can get one for $125.00 you are doing very well and will be very happy with your computer.
    Good Luck,
    Richard

  • I need help setting up a wireless network and getting connected to the internet. I have a RCN cable modem now and tried to install a wireless linksys today and it was a disaster

    I have a MAC desktop and RCN cable that I have internet through now. I tried to set up a linksys wireless router today and could not get the network settings right, or figure out how to create the network, or get connected. I was successfull for only a few minutes because my phone and laptop had picked up the signal. However my desktop still would not connect to the internet. I had to restart my cable modem after because even after returning to directly inserting the desktop to the modem I could not get on the internet. I am able to get on now but would like to have wireless for my laptop and phone. Do I have to have an Apple router? Are there any easy steps I can take to set up a network without doing any damage to my desktop? I am so lost and have been getting pop ups and even my time changed.
    Please help a new person to Apple!

    why dont you go to linksys.com/downloads and get the quick install for your adpter

  • Need help setting up a new Usenet/Newsgroup accoun...

    I have recently migrated from Pipex to to BT Total broadband 1.  I use Newzbin/Unison for my Usenet downloads and currently all is working fine using the Pipex server set up.  However as I want to eventually want to move all connections to BT servers I have been trying to set up a BT news account but without success.  I have read many forum threads here dealing with this problem but still cannot get any connection.  I have tried entering my default BT and Unison username and password but still no joy!  All I get is this ...
    I know the BT server name is news.btinternet.com using port 119 which I have entered but cannot understand what else to do!  I guess the problem is the user/password combination I am entering.  I am on a Mac OSX and have Mozilla Thunderbird for my email and have tried to set this up also but with no success.  Can anyone help please?

    miqs wrote:
    I have recently migrated from Pipex to to BT Total broadband 1.  I use Newzbin/Unison for my Usenet downloads and currently all is working fine using the Pipex server set up.  However as I want to eventually want to move all connections to BT servers I have been trying to set up a BT news account but without success.  I have read many forum threads here dealing with this problem but still cannot get any connection.  I have tried entering my default BT and Unison username and password but still no joy!  All I get is this ...
    <.piccy.>
    I know the BT server name is news.btinternet.com using port 119 which I have entered but cannot understand what else to do!  I guess the problem is the user/password combination I am entering.  I am on a Mac OSX and have Mozilla Thunderbird for my email and have tried to set this up also but with no success.  Can anyone help please?
    Hi miqs.
    The news server is news.btinternet.com (or as also mentioned news.btopenworld.com) and no userid/password details should be used.
    You mention all is well using the Pipex server set up, do you mean that you are actually still connected to Pipex ? (easily checked by going here http://www.ip-adress.com/ ).
    You need to be connected to a BTinternet connection in order to use the news server.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • I need help setting up a new apple id for my 7 year old's phone

    I bought my son and daughter apple 5c phones for their birthdays. My son is 7 and my daughter 4. When  I tried to set up from their phone, a message said that they needed to be 13 years of age or older. Any advice on how to set this up?

    New email accounts should be created and set up first with your email service provider--contact them for information about how to do that. Just making up a new address and typing it into Mail's preferences doesn't create a new email account.
    Edited to add: In addition, you probably want to establish a new user account for your wife on your Mac, so that you and she have separate folders and inboxes for your mail, once she has her own account set up. Separate user accounts also mean the two of you can have separate bookmarks on your browsers, separate document folders, and so on--almost as if you each had your own computer.
    Message was edited by: Jay Bullock

  • Need help setting up Vmware Workstation Network....

    If I simply create 5 Windows Virtual Machines and assign each a different IP address subnet, how will they be able to use my local network router to get to the internet? Also how will autodiscovery between the machines work?
    For instance, if my local router is operating on 192.168.1.1 and they all have subnets of 192.168.10.x, how would I get them to the internet?
    I also need to be able to RDP and LogMeIn to the virtual machines.
    I thought I saw something about setting up virtual routers or gateways at some point, but I am unable to find anything that explains that stuff on a beginner level.

    What you want to do is configure the network as host only. That should isolate them from the outside network.
    Of course if you didn't want to bother with that, you could simply give them a different ip address subnet than your outer network and no default gateway. That would prevent them from seeing anything on your local network and vise versa.http://pubs.vmware.com/workstation-11/index.jsp#com.vmware.ws.using.doc/GUID-93BDF7F1-D2E4-42CE-80EA...

  • Need help setting up a new email account for my wife.

    I've been trying to set up a separate email account for my wife with no success. I've gone to Preferences clicked the plus sign, it then asks for full name (my wifes'?) email address (would that be the one I pick for her or my email address?) and password- I'm assuming that's the password I use to get my email. It tells me it's checking connection to mail server and then says login to "POP failed".
    Thanks for the help.
    Richard

    New email accounts should be created and set up first with your email service provider--contact them for information about how to do that. Just making up a new address and typing it into Mail's preferences doesn't create a new email account.
    Edited to add: In addition, you probably want to establish a new user account for your wife on your Mac, so that you and she have separate folders and inboxes for your mail, once she has her own account set up. Separate user accounts also mean the two of you can have separate bookmarks on your browsers, separate document folders, and so on--almost as if you each had your own computer.
    Message was edited by: Jay Bullock

  • Need help setting up ftp/home network

    I am hoping someone can help me here.
    I have an emac, imac dv se, and 2 powerbooks. They are all connected to the internet via airport cards. I want to allow all of these devices to access a firewire drive that is connected to the emac AND make those files accessible to me and my wife over the internet. what is the easiest way to do this and what additional hardware/software do I need?
    thanks in advance for the assistance!
    emac 1 Ghz SD 768   Mac OS X (10.4.1)  

    Turn on FTP in the sharing control panel. Use Connect to Server in the Finder with an FTP URL or use an FTP client or ftp in the terminal. With FTP you can do a:
    $ cd /Volumes/nameofthefirewiredrive
    then go from there.
    File Sharing on OS X only shares the "Public" directory in your home directory. You might be able to put a symlink inside Public to /Volumes/thedrivesname
    $ ln -s ~/Public/externaldrive /Volumes/externaldrive
    and try enabling Personal File Sharing and trying Connect to Server.
    If your wireless network uses DHCP, remember that the IP address of a given computer may change without warning if DHCP give it a different IP. You might have better luck using the Bonjour/Rendevous name of the computer to connect consistently.

  • Help setting up my new IPod Touch on iTunes on windows 7 64bit

    Hello there,
    I need help setting up my new IPod Touch to my Itunes 10 application on a PC running windows 7 64bit. I have watched the tutorial on how to do it but what the tutorial says it is supposed to do is not what is happenning for me:
    1. In the tutorial it tells you to connect your ipod to your computer, then, (if it is for the first time) when the ipod appears and is selected, a window will come up allowing you to name your ipod, and begin selecting the options you wish to use.
    I did as instructed but quickly came against some technical issues.
    My issues:
    1-1: When I selected the new iPod Touch for the dirst time I got an error message.
    A) This was quickly fixed once I calld up apple support on the phone (turns out an IE browser setting was blocking it.)
    1-2: With that fixed I selected my iPod Touch again but instead of the window indicated by the tutorial, I instead got an iPod registration form window.
    1-3: I filled out the form and pressed the submit button (thinking everything was fine), then a new window came up that looks like this:
    Free Find My iPhone
    Free Find My iPad
    Free Find My iPod touch
    Set up Find My iPhone for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPad or iPod touch.Set up Find My iPad for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPod touch.Set up Find My iPod touch for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPad. _Learn More_
    _Set up Find My iPhone_
    _Not Now_ _Set up Find My iPad_
    _Set up Find My iPod touch_
    Find My iPhone (or iPad or iPod touch) enables you to locate your iPad with Wi-Fi or iPod touch only when it is on and connected to a registered Wi-Fi network. Find My iPhone is not available in all countries. "
    The first three lines and the first paragraph are indented as if there should be some type of graphic there, but it is missing. The underlined words indicate that they are supposed to be links, but they don't go anywhere, they are broken!
    Now wheenever I connect my iPod Touch and select it the above window comes up and nomatter what I try it will not move or change.
    Please help!
    MSRankin

    Try setting up the device in a new user account. or visit register.apple.com and verify your device is registered

  • How can I set up a new network on my apple tv when my remote app isn't picking it up because they aren't on the same network?

    How can I set up a new network on my apple tv when my remote app isn't picking it up because they aren't on the same network? The actual remote doesn't work anymore, so I've been using the remote app on my phone but now that our internet changed, I can't do anything at all. Please help!

    You can't use the remote app to setup a network. If your physical remote isn't working you will need borrow another or purchase a replacement.

  • Need help setting up and configuring rsync

    Hello
    I need help setting up, or rather configuring rsync to sync data between my brand new iMac and my Macbook Air.
    Here is what I would like to:
    - I want all of the files on both machines to be an exact mirror or copy of each other. Basically I have an iMac for at home, and then a Macbook Air for the road.
    - The main folder on both Macs is called 'Sara' and I want the contents (mainly the 'movies' folder, 'music' folder, 'documents' folder and 'pictures' folder) to immediately sync up with each other when both of them are on my home network.
    - this means if I'm working on a file at home on my Macbook, it will immediately write to the same directory on my iMac and vice versa (if I'm working on file(s) on my iMac, it will immediately save the contents to my Macbook). This way, if I'm working on last minute project my iMac, and then have to head out the door to the airport, the file is immediately saved to my Macbook (no usb for USB transfer).
    - hopefully this makes sense??
    Any help is greatly appreciated!
    Thanks

    It's a lofty but unrealistic goal.  Rsync does not run automatically.  There is no realistic method of instantaneously synching two computers over the internet or even on a LAN.
    I would suggest you might try using Synk Pro which, in theory, can keep two devices in sync when they are both on the same network (and both have shared and mounted drives.)
    If you must do this with rsync then I suggest a Google search for rsync tutorials.

  • I got a new computer and have reinstalled Dreamweaver.  I don't need to set up a new site, just need to set up reinstalled Dreamweaver to manage the old site on the company server. Does anyone have a step by step walkthrough for doing this?

    The site files are on our server and I can still access them.  I was not the one who installed and set up Dreamweaver initially and don't know very much about the program  Just enough to manage our simple site and keep it updated.  Just need help setting it up so that it's back to managing our website. 

    Go to Site > New Site and define your site.  See screenshots:
    Servers:  Enter your FTP log-in credentials and remote server's root directory.  If unsure, check with your hosting provider for details. 
    Click on TEST button.  If you're unable to connect, click the More Options triangle.
    Nancy O.

  • Setting up a new network - How does this look?

    Hello,
    Current layout of network - http://i30.tinypic.com/fkywav.jpg
    We currently use this way of setting up our network and we may be moving to a new office so i'm looking at the best way of setting up the new network while we have a relatively clean slate. All wiring is done via CAT5e ethernet.
    We run OS X Server 10.5 and use the following services within the building. File sharing, email, internet. We backup all machines individually with external drives but i'm looking at getting a large storage device to enable everyone to backup to one location using Time Machine Server.
    I'd like to know if the way our network is currently set up is the correct way for what we need. In the near future i'd like to start using iCal sharing, and hosting websites internally for web development.
    Regards
    James

    What you have will work; it's fairly typical network.
    The physical plant, and the plans for expansion, and the current speeds and feeds are also key details when designing a network.
    Cat5e? Don't skimp. Go Cat6 or better. Wiring is always around and in use for far longer than any of us want, and the cost of installation is comparatively vastly higher than the cost of the wire itself; retrofitting is to be avoided.
    As part of avoiding unnecessary retrofitting, run extra Cat6 or better wiring in parallel, too. Prepare to segment your network based on business organization or on physical organization, or both. The extra runs can provide physical redundancy, and bandwidth. The incremental cost of building out with extra (spare) wire is negligible. The cost of not having a wiring run where you need it is higher.
    Without knowledge of the physical plant, I'd also look at the establishment of wiring closets and such; you'll usually have a star at the core of the network in a smaller configuration, then stars at the wiring closet(s) (if any) and out at the desktop. This may be a plan now, and you have the wiring in place for the main runs to retrofit a server closet as you need it. Long wire runs out from the core are a pain. In a moderate or larger network, you'll be using the backhaul connections to the network cores; runs between server closets. (And if you may add server closets, remember the need for cooling can arise.)
    Depending on your plans and your network activities, I might (also) establish higher-bandwidth wiring between the wiring closets; what amount to backhaul connections. Either used up front, or in the closets should you need to place switches further out.
    Also look for corner cases, such as a business and operational environment where you'll be running a dozen or two client netboot operations at exactly 8:01 each and every morning as each staffer arrives and boots up the workstation; these cases can play havoc with aggregate bandwidth and server requirements.
    You may want to consider a parallel network (whether WiFi or wired) for guest access; a conference room or conference center network. You'll almost certainly want 11G and 11N WiFi for your own internal use, too.
    Yes, I usually overbuild these things. Planning and wiring are (comparatively) cheap. Installation isn't.
    Backing up to a Mac OS X Server disk or a TC disk via TM is part of what you need. If you get corrupted archival volume(s) or if your RAID array is somehow damaged or lost or stolen, you're in deep sneakers. I've had a couple of TC archives corrupted; stuff happens. Plan for off-site archives.

  • I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

    I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

    Two different things
    If you forgot the password
    If you forgot your Apple ID password - Apple Support
    If the email ID you want to use is in use by someone else - then you may need a new one
    The iCloud ID's are usually unique and may be of help if you set one up

Maybe you are looking for