Need help setting up email

I have a new Palm Cento...love it. Sync went well. Can't figure out email Called palm setup and they just kept reading from scripts, no go. My office is on a server and email comes through that. I use Outlook for email. Will this work / what do I need to do?
Post relates to: Centro (Sprint)

Who is your email through? There are a lot of preset servers in VeraMail. If you pick the one you have currently it will only need to ask for your username and password. If you are using one that is not in the list, you can go to that email services website and vew "Setting Up POP mail" and it will tell you what your settings are. Most likely it is something like POP.servername.com and SMTP.servername.com however you need to double check because some servers use different variations of that.
Post relates to: Centro (AT&T)

Similar Messages

Please Read This if You Need Help Setting Up Email...

Hi Everyone!
If you are hoping to use your Nokia phone for send and receiving emails you will need to set this up prior to use.
You may find that your phone has already been setup to send and receive emails by your network. This will be for the email address that has been provided to you by your network. If you would like to set up your phone for another email account, like your private or work email account, this will need to be set up by you.
The easiest way to do this is to order the settings from our site. You can do this from this link: Nokia Settings Page Here you can order all the settings you might need, to get your email settings click on Order Advance Settings and choose email when prompted.
Dont worry if you can't see your email provider in that list, if you have Nokia PC Suite installed you can connect your phone to your PC and configure your email account with some software.
If you have a 9500, 9300 or 9300i communicator you can go here: Nokia Configuartion Tool
If you have 3220, 6230i, 8800, 6810, 6820 or 6822 you can go here: Nokia Email Configuration Tool
If you have a series 60 phone like a 6680 or 7610 etc you can install the Settings Wizard from here: Nokia Settings Wizard. This application will attempt to configure your email settings for you. You will need a working installation of PC Suite to install this from your PC. If you are able to get the installation file on to your phone you will be able to install from there.
If your phone has not been listed in any of the above points, then unfortunately you will need to configure the phone manually. If you need to do this you will have to find out some basic information first:
Your incoming server address
Your outgoing server address
Do you require a secure incoming/outgoing connection?
Do you need SSL?
Your email provider will be able to provide all this information, if you get stuck during the setup on what you should be entering for a setting, your email provider will be able to help you out.
Hope this is enough to help some of you out, any comments are welcome - just send me a PM.
Cheers
Karim
EDIT: Updated link to the phonesettings pageMessage Edited by ajak on 20-Aug-2007 04:27 PM

Road Runner is a pain at times to get to work on both Wi-Fi and EDGE. It seems as if their outgoing mail server doesn't like to roam. CWMX is ONLY for use on the cellular network, and if you plan on using Wi-Fi to send e-mails periodically, CWMX will NOT work.
My solution: Sign up for a GMAIL account, and forward your e-mails to the GMAIL account (provided POP access is enabled). Just log-in to this GMAIL account with your iPhone, and you'll get all your e-mails! If you need any help, let me know, I'll be glad to get you some directions.

Need help setting up email on 10g

Okay, so I've run the utlmail.sql and the prvtmail.plb and it successfully completed. From what I understand I now need to do something like
alter system set smtp_out_server = '<ip-address:port' scope=Both;
My question is, how do I know what to put for the ip-address:port?
Another website describes configuring the SMTP_OUT_SERVER parameter like this......
alter system set SMTP_OUT_SERVER='mail.yourdomain.com' scope=spfile;
What would I use for mail.yourdomain.com?
Edited by: user632088 on May 24, 2010 2:25 PM

Well, I've got a 10g database on my home computer, but I don't exactly have a website or domain. My email account is with att/yahoo. I'm building an oracle application which will email out to a specified email address from a pl/sql procedure. What should I use for the SMTP_OUT_SERVER? The domain name for when I'm actually in my email or is it some IP address?

HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

Two different things
If you forgot the password
If you forgot your Apple ID password - Apple Support
If the email ID you want to use is in use by someone else - then you may need a new one
The iCloud ID's are usually unique and may be of help if you set one up

My email is not working in lightroom. Need help setting that up.

Need help setting up my email in lightroom. For some reason it's not connecting.

Try posting in the Lightroom forum. People there are more tuned in to the detail working of the application:
http://forums.adobe.com/community/lightroom?view=discussions

**New** Need help with your email?

If you’re forgotten your password (it’s so easily done), you need help setting up your email or you’re having problems with your email account please follow the step by step instructions to get help setting up and fixing any email issues you’re having.
Simply answer a few questions about your email account and what you need help with, and we’ll help with the rest.
Each step includes a helpful picture to keep you right.
We’d love to get your feedback on whether this helped you so please post on this board to let us know how you got on.
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

- Go to Settings>iTunes and App Stores and sign out and sign into update/new account.
Note:
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

Need help setting up outlook mail on ipad2

downloaded the outlook app, need help setting it up.

Is it actually called Outlook, or is it called Outlook Mail Pro or Outlook Mail Complete or something like that? Those apps are actually by separate companies (ie, not Microsoft), and I don't personally have experience with them, but here are links to their support sites which should have the information you need (or an email address you can write to):
Outlook Mail Pro: http://support.codebeforedawn.com/customer/portal/topics/38871-outlook-mail-pro
Outlook Mail Complete: http://www.ikonicapps.com/outlook/
hope that helps...
Matt

Need help setting up TV equiptment

I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}

blondeinneed wrote:
I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}
Teresa,
I think the best way for someone to volunteer to help you would be for them to send you a Private Message (PM) here on the forums. You should see a small envelope in the upper right corner of the screen, when it changes color you will know you have a PM to view.
I would be happy to help, but since I am in North Texas I don't think that is a viable option Sorry....
Justin
FiOS TV, Internet, and phone user
QIP7232, QIP7100-P2, IMG 1.9A
Keller, TX 76248

Need help setting up and configuring rsync

Hello
I need help setting up, or rather configuring rsync to sync data between my brand new iMac and my Macbook Air.
Here is what I would like to:
- I want all of the files on both machines to be an exact mirror or copy of each other. Basically I have an iMac for at home, and then a Macbook Air for the road.
- The main folder on both Macs is called 'Sara' and I want the contents (mainly the 'movies' folder, 'music' folder, 'documents' folder and 'pictures' folder) to immediately sync up with each other when both of them are on my home network.
- this means if I'm working on a file at home on my Macbook, it will immediately write to the same directory on my iMac and vice versa (if I'm working on file(s) on my iMac, it will immediately save the contents to my Macbook). This way, if I'm working on last minute project my iMac, and then have to head out the door to the airport, the file is immediately saved to my Macbook (no usb for USB transfer).
- hopefully this makes sense??
Any help is greatly appreciated!
Thanks

It's a lofty but unrealistic goal. Rsync does not run automatically. There is no realistic method of instantaneously synching two computers over the internet or even on a LAN.
I would suggest you might try using Synk Pro which, in theory, can keep two devices in sync when they are both on the same network (and both have shared and mounted drives.)
If you must do this with rsync then I suggest a Google search for rsync tutorials.

Need help Setting up Multiple Static Ip , 1 for each port of the fios router

Need help Setting up multiple Static Ip on my fios router
I have been trying to figure out how to set up multiple ip in my fios router.
However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
Verizon gave me 5 static ip but they can not help me how to set it up.
Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

Need help setting up FCE 4 PLEASE

OK, I'm NOT a professional, just need help setting up.
Just purchased FCE 4. Need to set up my Sony HDR SR11. I've already recorded most of my stuff in HD SP. Can someone Please help me set up?
thanks

Thanks for the info.
I updated and did a search in my manual for Log and transfer which didn't go to anything I can figure out. Sorry, I don't have time to read 1152 pages.
Can anyone just tell me how to get this going? There should be a simple set up correct?

I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

Deperately need help setting up external midi devices

I need help setting up external midi devices.....Motu828...Midi express...RolandXV3080....Motif rack.......HELP

Theres not really much to setup. Assuming your synths are connected to the MIDI Express already..
In Logic, make a new MIDI track. On the left hand side in the track inspector, among the parameters you'll see an option for MIDI Port and Channel. Just pick which port the track is going to, set the channel and device id and play (And be glad you never had to deal with setting up the old Environment window in Logic 5 and below).
If you really wanna get into it and have all your MIDI ports named after the synth thats connected to it, open up Audio Midi Setup, create a device icon for each synth you have and draw the cables from each device to whatever port its connected to on the midi interface's icon.
Then in Logic everytime you pick your MIDI port on your track, instead of MIDI Port 1, MIDI Port 2, etc.,
it would be labelled XV-3080, Motif Rack, and so on.. I dont think theres anyway to do this within Logic itself (you can change the labels on your audio ins and outs, but not MIDI as far as I can recall)..
If youre talking about having access to patch names and whatnot like Digital Performer and Cubase let you do, Logic doesnt use the xml patch lists everyone else does. The above steps are pretty much all there is to be done as far as MIDI.
Heres my Audio Midi Setup window for reference.
Now when I select MIDI Port 1 in Logic its named MWXT, port 2 is SR-16, etc..

HT5538 I dont really get this i need help setting some things up on my Ipod.Can you help?

I need help setting up my Imessage and FaceTime.I have tryed and its not working.

iOS: Using FaceTime
iOS: About Messages
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime

Need help setting up email

Similar Messages

Maybe you are looking for