Need help setting up eyeHome - Wireless with AX

Hi all,
I am trying to setup eyeHome over a wireless connection using Aiport Xtreme.
I have no problem connecting to the internet through AX and my D-Link ethernet modem (thanks to Apple Support), works perfectly.
But when I try and add eyeHome to this equation everything seems to stop working and I have to reset my AX and start all over again.
The problem seems to occur when I setup try to set up WDS over, I get an error about not being able to configure the base. Elgato's (eyeHome's makers) instructions on how to setup the device arent clear.
Please help me out on this. Cheers.

A little confused actually. Why does D-Link DSL- 300T have to support WDS, when it is the wireless adapter provided by Elgato which is having problems being configured. The setup is as follows?
WITHOUT ELGATO WIRELESS ADAPTOR ATTACHED:
ADSL LINE --via rj cable----> DLINK MODEM
DLINK MODEM ---via ethernet cable----> AIRPORT EXPRESS
AIRPORT EXPRESS - ----> iMac G5
WITH ELGATO WIRELESS ADAPTOR ATTACHED:
ADSL LINE --via rj cable----> DLINK MODEM
DLINK MODEM ---via ethernet cable----> AIRPORT EXPRESS
AIRPORT EXPRESS - ----> iMac G5
EYEHOME BOX ----via scart----->TV
WIRELESS ADAPTOR----via elgato's ethernet cable---> EYEHOME BOX
EYEHOME BOX---communicates via WIRELESS ADAPTOR through AX--->iMac
Hope this makes sense

Similar Messages

Just bought new time capsule- need help setting up WiFi network with another router

Here ismy situation.
I had a wireless network setup up at home using a Belkin wifi router.
I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port. In addition, I have a Verizon wireless network extender plugged in by ethernet. All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it. All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
Needless to say, this did not work well. I called AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router. The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal).
If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID to another stronger signal SSID as we move through the house
Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.

Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.
OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
Naming rule for wireless.. Same SSID same security different channel.
SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working.

Need Help setting up 2 wireless internet computers with 54g wireless router

I setup the 54g wireless router using the setup disk. It appears to have worked find and the first laptop has wireless internet. I am not familiar with setting up a totally wireless network so I am not sure if I did the rest right. I then setup the 54g wireless internet router on the 2nd computer. It appears to have loaded but will not connect to the internet. I looked at the linksys setup etc... for both computers and all is the same including the WPA key, IP address, and the rest. No differences noted. I have no idea why the 2nd computer does not have wireless internet access. It has wired access only. The 2nd computer shows the wireless network but won't connect to it. I click on it and hit refresh and nothing happens. I am at a loss as to what to do now.
With 2 wireless computers, must there be a main computer and a secondary computer? The 1st computer also doesn't have access to windows network setup for some reason. It tells me to go to the knowledge base at microsoft.com and look up 871122. No idea why the windows network setup is not working. It did work before I got a new cable service provider and modem. However, the windows network setup is working on the 2nd computer. Any help is appreciated.

does the 2nd computer even need the router info loaded into it like the 1st computer or should it be enough that the wireless network was created on the 1st computer? In other words, would having the router info loaded in both computers cause the 2nd one to not connect? I have spent hours on this and I am very confused now.
My router connects fine to the cable modem. the 1st computer connects fine to the router and gets the wireless internet without a problem. Again, the 2nd computer shows the network name but won't connect to it. help please!!

Need help setting up a network with new Airport Extreme

Hey All I need some help. Networks, Wan, WPA it's all greek to me. Here's what I am trying to do, I have a newer imac, an ipod touch, a apple TV and the kids have a laptop running on Vista. I have a DSL internet connection through Verizon with a Westell VersaLink Model 327W router. I disabled the wireless option on the versalink and hooked the Ethernet cable from the versalink to my Airport extreme. I am trying to figure out how to set things up so I can restrict the kids laptop from the internet after say 9pm but allow everything else unlimited access. I've read other posts and the manual but can't figure it out. When I turn the Airport off Bridge mode i get a bunch of errors re DHCP beginning and ending addresses and have no clue how to set this up. Before I spend hours on the phone with tech support I figured someone out there may be able to help. This can't be to difficult or is it?

rmunoz274 wrote:
I had to call Verizon and spend an hour on the phone, my Versalink is about 3 years old and I never updated it. There is a software update which makes it a little more mac friendly. Cables still run through it on the Ethernet port. I was able to turn the wireless feature off on the Versalink (to stop my neighbors and kids from bypassing the APE and just factory reset the APE and set it up with a shared IP adrs instead of bridging it. Also made sure I turned off the guest network on the APE. Once it was set up I clicked on Airport in the Airport Utility then wireless Clinets, jotted down the client I wanted to restrict access to (Kid's Laptop) then go back to Airport screen, last option on right Access then MAC Adrs Access Control change to "Timed Access", then click the + on the bottom of the window, type the MAC adrs you want to restrict and set time limits, when complete click done..... Only took me a week and a half to figure it out...... Good luck, if that doesn't help let me know, but I'm no expert...
thanks!!
i think i have the most recent 327w update, because it now shows my modem screen in a red color and it is broken into 3 sections across the screen.
as far as the AEBS is concerned, you did not use it in bridge mode at all?
i thought you had to connect 1 cable from it to the 327w? I have about 5 items i will be connecting, so i will probably run any wired from the AESB, but not sure yet?
thanks, and yaeh last time my network took me a bit of time as well!!
what kind of encryption are you running?
thanks

Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

Hello - I recently got Comcast Xfinity service. We had switched from a different service. Our wifi service was never great, but prior to Xfinity, it worked decently. But now that we have Xfinity, our wifi is much worse and very unreliable. I am seeking advice on how to setup my various Apple wifi devices in my home. I have attached a diagram that illustrates what I am dealing with. We have a large old house with stone walls. Comcast does not support this issue.
To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor. The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch. I already have ethernet cables running from the network switch in the basement to various locations throughout the house. So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices. The dark lines running from the network switch to the various devices represents ethernet cable.
The immediate problem that we are having is that we are unable to connect to our wifi networks. The networks show on my mac laptop and my iPhone, for example, but I am unable to connect. I know that I am inputting the correct password, but most of the time, we cannot get in. Sometimes we can..... Very frustrating! Also, due to the fact that I setup what I have over several years, I have multiple network names. I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
Here is what I am looking to accomplish:
1. Seamless wifi access throughout our house.
2. One name for our wifi network. Right now we have multiple names for multiple networks. Just want to simplify and have only one network. (I guess that an additional "guest network" would be ok, but not absolutely necessary.
Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this. Just tell me how to do so.
I have no idea how where to start or how to set this up. I imagine that I would need to disconnect everything and reset and start from scratch? Can someone tell me what I should do? Even general advice would be helpful, but the more specific, the better, given my limited understanding. Any help or advice would be greatly appreciated.
Thanks in advance!

Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Need help setting up my Wireless

Since the phone operators have failed to connect my call within 45 minutes of calling tech support and online chat requires that I know my father's email (seriously, who makes a tech support where getting support is more frustrating than dealing with the actual problem?) I have decided to ask the forum to see if anyone can help me out.
My family got a wireless router for our verizon Fios internet about a week ago. My computer currently runs wirelessly off the router. Unfortunately, for whatever reason, after connecting to the wireless router my computer gets kicked off the internet for about 5-10 seconds every 5 minutes or so when the computer or the router resets the connection for whatever reason.
I have had a wireless router for this computer in the past and it has worked fine. My question is how can I fix the router so that it does not reset my connection every 5-10 minutes.

How do you assign your IP addresses? If some computers have static IP addresses and those are allocated for DHCP then one of the computers would be kicked out from your local network. Sometimes Windows gives you a worning that other devce uses the same IP address. But sometimes it does not.
Another question is: how do you know that you have been kicked out of net?

I need help setting up ipad 2 with airport express??

I am having trouble getting my ipad to play music wirelessly, but my macbook is fine. Is there something I need to do on my ipad to get it to work?

Please check out the following Apple Support articles on how to stream iTunes from your IPad:
Using AirPlay
Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes

I need help setting up a wireless network and getting connected to the internet. I have a RCN cable modem now and tried to install a wireless linksys today and it was a disaster

I have a MAC desktop and RCN cable that I have internet through now. I tried to set up a linksys wireless router today and could not get the network settings right, or figure out how to create the network, or get connected. I was successfull for only a few minutes because my phone and laptop had picked up the signal. However my desktop still would not connect to the internet. I had to restart my cable modem after because even after returning to directly inserting the desktop to the modem I could not get on the internet. I am able to get on now but would like to have wireless for my laptop and phone. Do I have to have an Apple router? Are there any easy steps I can take to set up a network without doing any damage to my desktop? I am so lost and have been getting pop ups and even my time changed.
Please help a new person to Apple!

why dont you go to linksys.com/downloads and get the quick install for your adpter

Need help setting up web server with WRT54GS

Hello,
I am trying to set up a web server with my linksys router. For the network settings, I have used 192.168.001.150 as my primary IP (192.168.1.150, all 3 numerical characters have to be filled in), 255.255.255.000 as my primary netmask and 192.168.001.001 (192.168.1.1) as my gateway. I have gone into my router and then enabled port fowarding for port 80 to 192.168.1.150 but I still cannot access my web server. What could be the problem?
Any help would be greatly appreciated. I'm trying to set up this server so I can test scripts and things.

bump

Need Help Setting Up Raid Card with Windows xp pro 64 bit

I need a 64 bit driver for my k8t neo-fis2r motherboard. I tried to use the disk that came with the board, but I keep getting an error. please help.

go to the via website and download the via 5.00a package, it contains a driver for the onboard via controller!
dont try the promise one, it wont work! tried it several times! we have to wait for an updated driver to be able to use it!

I need help setting up file sharing with my MBP and a PC

i have been trying to set up file sharing so I can move files on my windows PC (music, pic's, office, pdf, etc..) to my new MBP. I followed all the directions, but still cannot see the MBP on the PC. I had it working a few days ago by setting up the workgroup function. but now, nothing. it will not show up in Windows Explorer. Just trying to move files into Dropbox. Help!! thanks.

i have been trying to set up file sharing so I can move files on my windows PC (music, pic's, office, pdf, etc..) to my new MBP. I followed all the directions, but still cannot see the MBP on the PC. I had it working a few days ago by setting up the workgroup function. but now, nothing. it will not show up in Windows Explorer. Just trying to move files into Dropbox. Help!! thanks.

Need help setting up for wireless printing- remote access- by email

When trying to set up my printer I get a box that says "Printers Code", is the "printer code" another word for hardware address or is it the access point hw address or what is it? I wish the HP people would stick to the same nomenclature in their set up!

Hi,
Printer code is a code for your printer which allows you to register to ePrint center. From there you can get printer email address and you can email to this email address for printer to print. Not all printers have printer code. You can read more information from the following link:
https://h30495.www3.hp.com/help/about
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Re: I need help setting up OfficeJet 7400 with WPA2

If I select WPA my Netgear N300 drops down from 300kps to 54kps. That is unaccecptable. Is there an update to the OfficeJet 7400 All-in-one that will provide WPA and not just WEP security protocol?
Also, I downloaded the Update for Windows 7 64bit and when I ran it says it is not for Windows 7. What's up with that? Nice job HP!

If I select WPA my Netgear N300 drops down from 300kps to 54kps. That is unaccecptable. Is there an update to the OfficeJet 7400 All-in-one that will provide WPA and not just WEP security protocol?
Also, I downloaded the Update for Windows 7 64bit and when I ran it says it is not for Windows 7. What's up with that? Nice job HP!

Need help setting up Raid HD with 10.5?

I have a 2tb external HD, my G5 sees it as a 1x2TB (not 2x1TB), I am running out of space and I was thinking about getting another 2TB HD.
Is there a way, using Leopard, to mount the two drive as one 4TB?
Thanks
Fred

Hi Fred,
1. Test and verify your 2TB clone. If at all, clone the clone to somewhere else.
2. Connect the new 2TB drive, erase it and the other 2TB drive (thus both drives you want to use to create your "main" 4TB drive) in Disk Utility.
3. Create a striped array. From the DU helpfile:
Select one of the disks that you want in the set, and click RAID.
Click Add , and type a name for the RAID set.
Choose a format from the Volume Format pop-up menu.
Choose Striped RAID Set from the RAID Type pop-up menu.
Drag the disks you want to use in the set to the list on the right.
Click the Options button to specify an optimal block size for the data stored on the set.
Set the block size to match the size of data stored on the set. For example, a database might store small units of data, so a small block size might be best. A video processing application might require fast throughput of large amounts of data, so a larger block size might be best.
Click Create.
4. Clone over from the 2TB clone to the new 4TB array.
5. Repeate steps 2 and 3 to create the 4TB "clone" drive.
6. Clone back from the "main" 4TB drive to the new 4TB clone array.
You will find lots of info in the DU helpfile on RAID options. There's also a good article on Wikipedia (search for RAID). Plus loads of posts here (do a "site:discussions.apple.com" search on Google).
/p

Help setting up BTinternet email with Apple Mail

Hello everyone,
I need help setting up a btinternet email account with Apple's Mail sofware. I am setting it up on behalf of my aunt and uncles new macbook pro so I hope i get some solutions quick because Im leaving their place by the end of the weekend and I would love to have their email setup and teach them how to use it.
They have 2 btinternet email accounts, the first one they use alot as its their main email account which is currently setup on MS Outlook on their old computer. The secound one they use rarely and its not setup on MS Outlook.
Heres the problem, when I setup their main email account with apple mail, I have no problem creating the account however once created the inbox is empty - it does not load previous emails. It can send emails fine, if i send an email to the account using my personal email it will receive it but when I switch off the computer and switch it back on the mail box is empty. So I checked the email account by going to yahoo.co.uk and signing in - again even on the web page the mail box is empty.
I then setup the second btinternet email account on Apple Mail shockingly this works perfectly all the old emails got loaded up in mail. So how do I do this for the main account, I know the difference is Outlook mail but I rather not delete that because if it doesnt work then they would lose all their old emails.
Please help
Thanks in advance
PS: ive setup my hotmail and yahoo accounts and they all work fine by the way

Please guys give me something or any random ideas u may have. im running out of time.

Need help setting up eyeHome - Wireless with AX

Similar Messages

Maybe you are looking for