Need help setting up local server to test my pages on my laptop

Hey i'm at home and i'm trying to set dreamweaver up so i can
test this site locally how do i set up the dreamweaver to use it
and when i tell it preview in browser it will work i'm new at
setting it up and i'm confused...

quote:
Originally posted by:
Newsgroup User
What scripting model are you using, and what OS are you
running?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Codeman0013" <[email protected]> wrote in
message
news:e7hsdv$i2i$[email protected]..
> Hey i'm at home and i'm trying to set dreamweaver up so
i can test this
> site
> locally how do i set up the dreamweaver to use it and
when i tell it
> preview in
> browser it will work i'm new at setting it up and i'm
confused...
>
i'm running xp pro sp2 and its an asp page

Similar Messages

Need help setting up web server with WRT54GS

Hello,
I am trying to set up a web server with my linksys router. For the network settings, I have used 192.168.001.150 as my primary IP (192.168.1.150, all 3 numerical characters have to be filled in), 255.255.255.000 as my primary netmask and 192.168.001.001 (192.168.1.1) as my gateway. I have gone into my router and then enabled port fowarding for port 80 to 192.168.1.150 but I still cannot access my web server. What could be the problem?
Any help would be greatly appreciated. I'm trying to set up this server so I can test scripts and things.

bump

Need help setting up LDAP server for Address Book

I've set up Panther servers before for AFP which is pretty simple but now the office I work at wants me to setup an LDAP server so they can share the same contact information, probably about 2,000+ entries. I'm guessing that this will have to be entered in the LDAP server entry by entry.
I need to know how to setup the server and what settings need to be on the clients' computers, such as in Address Book.
The server is an older G4 tower and I've got 8 computers hooked up to it on a simple network. I don't think I'll need to make the LDAP server accessible from outside the network but it's something I'll have to worry about for the future.
Thanks for any help you can offer.

bump

Need help setting up xrdp server on my Arch

Hey,
I want to set up an XRDP/VNC server on my personal computer which is running the latest Arch linux (X64).
I wanted to use xrdp as I am going to connect to my computer from a windows based OS (work).
I want to be able to do so using microsoft's RDP program (mstsc) as I am unable to install any software I like, it's a laptop from work.
So far I have downloaded and installed XRDP from AUR and installed the tightvnc as it was a dependency.
Right now I am kind of clueless about what to do/config/etc..
Help will be appreciated.
Thanks !

From one newb to another, I can give the process I took to get it running. First and foremost, uninstall xrdp from the AUR, I could not get it to work no matter what I tried
Next you will need to make sure xvnc is working properly, this can be done by:
Xvnc :1
More then likely you will get several font errors, as Xvnc is looking for its fonts in the /usr/X11R6/lib/X11/fonts directory, and Arch deposits that in the /usr/share/fonts directory. So to fix this we do:
ln -s /usr/share/fonts /usr/X11R6/lib/X11
now try the Xvnc command above, it should work properly this time (might be a font error or two but the server is running).
So now that we have Xvnc running properly, lets go to sourceforge and gank the latest xrdp tar ball... http://xrdp.sourceforge.net/
I used the standard install (generic linux install) with "tar zxvf" then "make" and then "make install"
If you are using KDE, you should be all set, if another WM, then search through the forums (Ubuntu had several hits on xrdp and are Gnome specific) as I would more then likely steer you in the wrong direction.
Next we need to remove the lock on Xvnc :0 so it can restart (or you can restart your system if it makes you feel better), its in the /tmp/ as .X10-lock
then run the following command to startup xrdp:
/usr/local/xrdp/xrdp_control.sh start
I hope this helps, if not completely, at least in the proper direction. As I mentioned, there is a lot of info in the Ubuntu forums on xrdp, some of it is helpful, other is meh

Need help setting up Lion Server

Here's my story... I got a 2006 Xserve for free. It has 2 dual core 2.66 Xeons, 4 GB of RAM, and 2 300 GB SAS drives that I have turned into a RAID 1 array. I've installed OS X Lion Server on it and all is running okay. My OS X Server knowledge is slim to none. I do a little work with it at my job, but our main servers are Windows. I'd like to set it up as a DHCP and Open Directory server at home, just for fun. My home network consists of this Xserve, my 27" iMac, a MacBook Pro, an Xbox, a Samsung TV, a couple of iPads and our iPhones.
I go from my Charter modem, to my AirPort Extreme, and then broadcast wirelessly to my other devices, and have my Xserve plugged into port 1.
To get DHCP working, do I need to go from my modem to my Xserve, and then from my Xserve to the WAN port on my AirPort Extreme? Or do I just need to configure something?
Thanks in advance for any help you can offer!

If you have just Lion Server installed, go here for the rest of the tools:
http://support.apple.com/kb/DL1528
This will include Server Admin. It will allow you to define DHCP, DNS, and other services not available in Lion's Server.app.
You networking knowledge will apply here. It sounds like you want to use the Xserve as the NAT gateway. This is possible, but you will need Server Admin to make it easier.

Need help setting up Mac server for dental practice?

My dentist is running windows server 2003 and wants to do a total upgrade to Apple server components. The issue is that the software his office uses for patient records is not Mac compatible. He is really set on the Mac environment and is curious if he can run the software on a Mac running Windows and I guess my question is the same. I don't have the specifics on the software he needs to run but from what he says it is fairly low overhead and handles some large jpeg files but mostly small data files.
I am curios how difficult the task of migrating all the info into the Mac environment will be? He is also curious about remote access from home or wherever he needs to get to his info and am curious if a VPN or other method is best.
Thanks

Ok, I am a sucker. I will bite.
The answer is yes. OS X and OS X Server can run Windows in a virtual machine using Parallels of VMWare (or virtual box, or Crossover, or... you get my point). This will allow you to run Mac hardware with Mac software but at the same time run Windows and the required applications.
But, there is a cost penalty here. First, there is the cost of the hardware. Not a big deal, Apple is competitive in price and the server hardware is very nice. Then there is the cost of Windows and the VM software. This is your tax. You have to add these costs on top of what you are already buying and then there is the hidden cost of the additional support. You are now supporting two operating systems, OS X and Windows. And just because Window is running on a Mac does not make it immune to viruses/spyware/trojans/etc.
If this guy really wants to go the Mac route, then go all Mac. Check out http://www.macpractice.com/mp/dds/ or http://www.macdentpro.com/index.php or do a search. There are a number of products that can handle dental practices on Macs, including the radiology aspect. Google is your friend.
As for remote access, OS X Server has a VPN built in that works well. That is not a problem. Or you can get a dedicated VPN appliance to handle security. Once bit of advice. Make sure you implement a good backup solution. Don't be foolish and think that TIme Machine alone is going to save you. This is medical records. Do not mess with them. Spend the dollars to properly harden the environment and ensure record retention policies are met.
Hope this helps

Need help setting up FTP server.

I have a networked video server that converts analog video from my security cameras to mpeg, it has an internal FTP client that I have pointed to a share on my server, with the correct login info. This will all occur on my intranet and if possible I do not want FTP open to the internet. I can not connect to the server via FTP. Any advice would be appreciated.

John, this is all very vague.
What is your FTP software? or if inbuilt to the OS, which OS is it? Mac, Windows, other?
When you say you can't connect to the FTP box, is this using your "Video server" (What OS is it)?
Have you tried using another machine to connect to your server?
More info please...

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

Need help Setting up Multiple Static Ip , 1 for each port of the fios router

Need help Setting up multiple Static Ip on my fios router
I have been trying to figure out how to set up multiple ip in my fios router.
However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
Verizon gave me 5 static ip but they can not help me how to set it up.
Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

Need help setting up TV equiptment

I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}

blondeinneed wrote:
I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}
Teresa,
I think the best way for someone to volunteer to help you would be for them to send you a Private Message (PM) here on the forums. You should see a small envelope in the upper right corner of the screen, when it changes color you will know you have a PM to view.
I would be happy to help, but since I am in North Texas I don't think that is a viable option Sorry....
Justin
FiOS TV, Internet, and phone user
QIP7232, QIP7100-P2, IMG 1.9A
Keller, TX 76248

Need help setting up and configuring rsync

Hello
I need help setting up, or rather configuring rsync to sync data between my brand new iMac and my Macbook Air.
Here is what I would like to:
- I want all of the files on both machines to be an exact mirror or copy of each other. Basically I have an iMac for at home, and then a Macbook Air for the road.
- The main folder on both Macs is called 'Sara' and I want the contents (mainly the 'movies' folder, 'music' folder, 'documents' folder and 'pictures' folder) to immediately sync up with each other when both of them are on my home network.
- this means if I'm working on a file at home on my Macbook, it will immediately write to the same directory on my iMac and vice versa (if I'm working on file(s) on my iMac, it will immediately save the contents to my Macbook). This way, if I'm working on last minute project my iMac, and then have to head out the door to the airport, the file is immediately saved to my Macbook (no usb for USB transfer).
- hopefully this makes sense??
Any help is greatly appreciated!
Thanks

It's a lofty but unrealistic goal. Rsync does not run automatically. There is no realistic method of instantaneously synching two computers over the internet or even on a LAN.
I would suggest you might try using Synk Pro which, in theory, can keep two devices in sync when they are both on the same network (and both have shared and mounted drives.)
If you must do this with rsync then I suggest a Google search for rsync tutorials.

I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

Two different things
If you forgot the password
If you forgot your Apple ID password - Apple Support
If the email ID you want to use is in use by someone else - then you may need a new one
The iCloud ID's are usually unique and may be of help if you set one up

Need help setting up FCE 4 PLEASE

OK, I'm NOT a professional, just need help setting up.
Just purchased FCE 4. Need to set up my Sony HDR SR11. I've already recorded most of my stuff in HD SP. Can someone Please help me set up?
thanks

Thanks for the info.
I updated and did a search in my manual for Log and transfer which didn't go to anything I can figure out. Sorry, I don't have time to read 1152 pages.
Can anyone just tell me how to get this going? There should be a simple set up correct?

My email is not working in lightroom. Need help setting that up.

Need help setting up my email in lightroom. For some reason it's not connecting.

Try posting in the Lightroom forum. People there are more tuned in to the detail working of the application:
http://forums.adobe.com/community/lightroom?view=discussions

Need help setting up local server to test my pages on my laptop

Similar Messages

Maybe you are looking for