Need Help setting up microphone, Using Soundblaster AUD

Hey everyone, i jsut wanted to say , im having troubles with setting up my microphone, i have the latest Audigy ZS drivers installed and have the microphne connected to the right jack, but cant get any sound , can anyone help me or has anyone else had this problem? i am also using Vista, Thanks!.

The_Punish3r,
Make sure you have Microphone selected as the recording source and that it's not muted. Also disable "record without monitoring" (red '+' below REC in the Creative mixer for Audigy 2 ZS) if you want to hear yourself through speakers/headphones. I'm assuming you're connected through the rear microphone jack.Message Edited by Katman on 0-6-20070:30 AM

Similar Messages

Need help setting up WRT54G2 using a wireless internet modum

My goal is to setup my wireless printer (which is in an adjacent room), to my pc. There arn't any other computers/connections to make, just this one. My internet connection is a verizon wireless modem. ( I am in a very rural area with no DSL or cable available.) I'm getting 'internal error: 301' by the second screen and have no idea where to go from here. Please help.

If your Internet Service Provider is DSL follow this link

HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

Need help setting up and configuring rsync

Hello
I need help setting up, or rather configuring rsync to sync data between my brand new iMac and my Macbook Air.
Here is what I would like to:
- I want all of the files on both machines to be an exact mirror or copy of each other. Basically I have an iMac for at home, and then a Macbook Air for the road.
- The main folder on both Macs is called 'Sara' and I want the contents (mainly the 'movies' folder, 'music' folder, 'documents' folder and 'pictures' folder) to immediately sync up with each other when both of them are on my home network.
- this means if I'm working on a file at home on my Macbook, it will immediately write to the same directory on my iMac and vice versa (if I'm working on file(s) on my iMac, it will immediately save the contents to my Macbook). This way, if I'm working on last minute project my iMac, and then have to head out the door to the airport, the file is immediately saved to my Macbook (no usb for USB transfer).
- hopefully this makes sense??
Any help is greatly appreciated!
Thanks

It's a lofty but unrealistic goal. Rsync does not run automatically. There is no realistic method of instantaneously synching two computers over the internet or even on a LAN.
I would suggest you might try using Synk Pro which, in theory, can keep two devices in sync when they are both on the same network (and both have shared and mounted drives.)
If you must do this with rsync then I suggest a Google search for rsync tutorials.

I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

Two different things
If you forgot the password
If you forgot your Apple ID password - Apple Support
If the email ID you want to use is in use by someone else - then you may need a new one
The iCloud ID's are usually unique and may be of help if you set one up

Deperately need help setting up external midi devices

I need help setting up external midi devices.....Motu828...Midi express...RolandXV3080....Motif rack.......HELP

Theres not really much to setup. Assuming your synths are connected to the MIDI Express already..
In Logic, make a new MIDI track. On the left hand side in the track inspector, among the parameters you'll see an option for MIDI Port and Channel. Just pick which port the track is going to, set the channel and device id and play (And be glad you never had to deal with setting up the old Environment window in Logic 5 and below).
If you really wanna get into it and have all your MIDI ports named after the synth thats connected to it, open up Audio Midi Setup, create a device icon for each synth you have and draw the cables from each device to whatever port its connected to on the midi interface's icon.
Then in Logic everytime you pick your MIDI port on your track, instead of MIDI Port 1, MIDI Port 2, etc.,
it would be labelled XV-3080, Motif Rack, and so on.. I dont think theres anyway to do this within Logic itself (you can change the labels on your audio ins and outs, but not MIDI as far as I can recall)..
If youre talking about having access to patch names and whatnot like Digital Performer and Cubase let you do, Logic doesnt use the xml patch lists everyone else does. The above steps are pretty much all there is to be done as far as MIDI.
Heres my Audio Midi Setup window for reference.
Now when I select MIDI Port 1 in Logic its named MWXT, port 2 is SR-16, etc..

HT5538 I dont really get this i need help setting some things up on my Ipod.Can you help?

I need help setting up my Imessage and FaceTime.I have tryed and its not working.

iOS: Using FaceTime
iOS: About Messages
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime

Need help setting up TV equiptment

I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}

blondeinneed wrote:
I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}
Teresa,
I think the best way for someone to volunteer to help you would be for them to send you a Private Message (PM) here on the forums. You should see a small envelope in the upper right corner of the screen, when it changes color you will know you have a PM to view.
I would be happy to help, but since I am in North Texas I don't think that is a viable option Sorry....
Justin
FiOS TV, Internet, and phone user
QIP7232, QIP7100-P2, IMG 1.9A
Keller, TX 76248

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!! iPhone 4S, iOS 5.0.1

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
iPhone 4S, iOS 5.0.1

Try updating to iOS 6.1.3.

Need help writing host program using LabView.

Need help writing host program using LabView.
Hello,
I'm designing a HID device, and I want to write a host program using National Instrument's LabView. NI doesn't have any software support for USB, so I'm trying to write a few C dll files and link them to Call Library Functions. NI has some documentation on how to do this, but it's not exactly easy reading.
I've written a few C console programs (running Win 2K) using the PC host software example for a HID device from John Hyde's book "USB by design", and they run ok. From Hyde's example program, I've written a few functions that use a few API functions each. This makes the main program more streamlined. The functions are; GetHIDPath, OpenHID, GetHIDInfo, Writ
eHID, ReadHIC, and CloseHID. As I mentioned, my main program runs well with these functions.
My strategy is to make dll files from these functions and load them into LabView Call Library Functions. However, I'm having a number of subtle problems in trying to do this. The big problem I'm having now are build errors when I try to build to a dll.
I'm writing this post for a few reasons. First, I'm wondering if there are any LabView programmers who have already written USB HID host programs, and if they could give me some advice. Or, I would be grateful if a LabView or Visual C programmer could help me work out the programming problems that I'm having with my current program. If I get this LabView program working I would be happy to share it. I'm also wondering if there might already be any USB IHD LabView that I could download.
Any help would be appreciated.
Regards, George
George Dorian
Sutter Instruments
51 Digital DR.
Novato, CA 94949
USA
[email protected]
m
(415) 883-0128
FAX (415) 883-0572

George may not answer you. He hasn't been online here for almost eight years.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Need help Setting up Multiple Static Ip , 1 for each port of the fios router

Need help Setting up multiple Static Ip on my fios router
I have been trying to figure out how to set up multiple ip in my fios router.
However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
Verizon gave me 5 static ip but they can not help me how to set it up.
Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

I need help from chile and use a language translator to write and not turn my iphone4

I need help from chile and use a language translator to write and not turn my iphone4

http://support.apple.com/kb/TS3281
Not turn on

Need help setting up FCE 4 PLEASE

OK, I'm NOT a professional, just need help setting up.
Just purchased FCE 4. Need to set up my Sony HDR SR11. I've already recorded most of my stuff in HD SP. Can someone Please help me set up?
thanks

Thanks for the info.
I updated and did a search in my manual for Log and transfer which didn't go to anything I can figure out. Sorry, I don't have time to read 1152 pages.
Can anyone just tell me how to get this going? There should be a simple set up correct?

My email is not working in lightroom. Need help setting that up.

Need help setting up my email in lightroom. For some reason it's not connecting.

Try posting in the Lightroom forum. People there are more tuned in to the detail working of the application:
http://forums.adobe.com/community/lightroom?view=discussions

Need Help setting up microphone, Using Soundblaster AUD

Similar Messages

Maybe you are looking for