Need help setting up VPN with OS X Server 2.2

I just bought OS X Server in the hopes that it would be a simpler way to set up VPN for use with my iPhone. I've tried a couple third party VPN configuration tools before with older versions of OSX but was never able to get it working. Now I'm running 10.8.2 and Server 2.2. I've made some progress, but I'm not quite there yet.
Here's what I have set up in the VPN window:
And the user I created:
The User services show that VPN is selected:
I let the Server app configure my Airport Extreme, and it looks like it set up the port mapping:
Here are my iPhone settings
-Server is set to my iMac's public IP address assigned by my ISP
-Password is the password I gave the user account
When I turn the VPN on in the iPhone I get:
"Connecting..."
"Starting..."
"Authenticating..."
then an error:
"VPN Connection
Authentification failed."
What am I missing?
Thanks,
Sean

Hi,
1701
UDP
L2TP
l2f
Mac OS X Server VPN service
1723
TCP
PPTP
pptp
Mac OS X Server VPN service
Try L2TP

Similar Messages

Need help setting up a netboot/net restore server

I am looking for a link and or step by step instructions to set up a netboot net restore server in Mac OS X.4 server.
I am using a G5 1.6SP with Mac OS X.4 server
My goal is to put OS images on this server so i can quickly restore computers with a clean OS install via network
I have created the images already and currently use a fire wire drive to boot fromso i can restorethe computers with the images storedon the fire wire drive..the server would allow me to install via network.
So once again if someone can point me to a resource that provides step by step instructions i would appreciate.

Tony has pointed you in the proper direction. One interpretation of what he's pointed you to:
Here's what has worked for me in the past.
When I do netinstalls, I do the following. Disclaimer - I know this is not the only way, but it works...
Set up one client exactly as I want it, apply all updates, run fsck, repair permissions, and test it out thoroughly.
I then boot the client in target mode, and attach it directly to the server with a firewire cable and use the image utility on the server to make an image. Follow the prompts to make it a netboot/netinstall image. From the clients, choose the network install image in StartupDisk (or hold the N key when you boot the client, or hold the option key for the bootmanager). You'll obviously need to enable netboot on the server, and it does rely on DNS to be running correctly on the server, just in case you weren't aware. This is not the only way to go, but it should work.
Jeff
Message was edited by: Jeff Kelleher

WRVS4400N v2: Need help setting up VPN for Mac

I'm having problems trying to establish a IP Sec tunnel from the office to home. All of our machines are Macs so I have been using the directions described in "How to create an IP Sec tunnel for MAC Clients, A QVPN alternative" but I still can't get it to work. My setup is as follows:
The office is connected to the outside world through a MODEM (Sagemcom 2864 Connection Hub). This MODEM is also a wireless router. It's DHCP server provides addresses 192.168.2.x.
The WRVS4400N's WAN port is connected to one of the LAN ports on the MODEM. It's IP address from the MODEM is 192.168.2.x. The WRVS4400N provides addresses 192.168.21.x to devices connected to it.
We have a DynDNS account and are using the DDNS client on the WRVS4400N router to connect to it.
At home, we have a DIR-655 router with IP Sec Passthru enabled. The router provides IP addresses 192.168.1.x for all devices connected to it. I am fairly sure there are no issues with the router setup at home since I am able to VPN into the office of my full-time job without any problems.
I have tried just about everything I can think of but have not been able to get this to work. Can someone please help with setting up the Local and Remote Group Settings on the WRVS4400N and the IP address settings in IP Securitas?
TIA

Hi,
If you need to establish a client vpn connection with the WRVS4400N, first you need to insure that the modem infront support IPSec Passthrough and that UDP ports 500 and 4500 are forwarded to the WAN IP of WRVS4400N.
On WRVS4400N you have to configure IPSec VPN tunnel, and when configuring IPSecuritas insure that you have the same encryption as on the router.
It could help if you enable the Local logs and see the error message.
You can provide the log output and print screens of the IPSec configuration, also screenshot of configuration of IPsecuritas

Need help setting up VPN on my iPhone 5, anyone?

Would like to set up a VPN account for my iPhone 5. Can I get some help from point 1?

Wy don't you get an app like VPN express. It has good instructions

Need help in setup vpn with IGMP enabled !

hi all
i hve cisco 2901 router and i want to setup vpn that allow IGMP ,
can somebody help me with it or at least sample configuration ?
can it be done from http gui ? or it is mandatory from cli ?
regards

Hello,
So you plan to send multicast traffic over the tunnel?
It could be possible to do it via both ways, thing is is harder to get assistance via GUI as for example I have no access to any router. I reply based on commands that I remember so CLI is a must.
I would recommend using a GRE tunnel to send the Multicast traffic through it
Looking for some Networking Assistance?
Contact me directly at [email protected]
I will fix your problem ASAP.
Cheers,
Julio Carvajal Segura
http://laguiadelnetworking.com

Need Help Setting Up Chattermail with AT&T Yahoo Mail Account

Ok... so I've spent half the day trying every possible permutation of my login, server name etc and I STILL can't get Chattermail to successfully log in.
This is a paid Yahoo mail account. The servers I succesfully use for my older 700w were: incoming: pop.sbcglobal.yahoo.com, outgoing: smtp.sbcglobal.yahoo.com
I'm confused by the set up in chattermail. It doesn't have the servers marked as "outgoing" and "incoming" I've put the incoming server name in the "define" tab and the outgoing in the "smtp" tab.
I've tried both my entire email address and just the part before the "@" as my login. I also have the ssl boxes checked because my system seems to be using those.
I cannot get it to work. Does anyone have any ideas?
Post relates to: Centro (Verizon)

Have you checked the Website for Chattermail for help?
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Need help setting up iSync with Palm

So, I'm trying to set up my Palm Treo 650 to sync with something other than Palm Desktop -- either Entourage or iCal, I guess. But I'm in this loop where iSync can't find Palm Desktop's HotSync Manager, and the HotSync Manager doesn't list iSync in its conduit settings. I can't figure out how to get the two to recognize each other.
When I select iSync > Devices > Enable Palm OS Syncing, I get an error message saying Hot Sync Manager has not been properly installed, etc. But it has. I've been syncing fine with Palm Desktop, I just don't like it and want to try something else.
I think I have the latest versions of everything installed -- OS 10.4.5, iSync 2.1.1, Palm Desktop 4.2.1, Entourage 10.1.6, iCal 2.0.3.
My Treo is syncing fine via both USB cable and Bluetooth.
Any ideas? Thank you.

Forgive my long-delayed response; I got busy with school and work. I have now been attacking this problem on and off, most recently for several hours today, and am slowly going insane.
I managed to get everything we talked about here set up -- the Disabled Conduits folder, an iSync conduit in Hot Sync, my Palm device added and syncing with iSync ....
I even got Palm info showing up in iCal. But I could not get Palm info imported into Entourage. The import wizard kept saying "the Palm Desktop file could not be found," or words to that effect.
I reset ALL the applications permissions.
I tried to install the latest version of Palm Desktop, 4.2.1 Rev D. over 4.2.1 Rev A (I assume, because it just said 4.2.1). Kept getting an error message at the final step in the installation process: "There were problems installing. Please try again.)
So I tried to reinstall Palm Desktop from my installation CD, and got the same install error.
So I deleted every vestige of Palm and Hotsync I could find on my computer, emptied the trash, and then tried to install the Palm Desktop CD. Same install error.
I am able to install other types of software just fine; in fact, just installed an OS X security update this morning.
This is driving me crazy. I don't know what to do. I am on Spring Break so I have some time to mess with my computer, but after tonight my Internet access will be spotty for the next week.

Need help setting up JDBC with mySQL and Netbeans

I've successfully got mySQL up and running and created a few simple test databases. I've been following the instructions on this website (http://www.stardeveloper.com/articles/display.html?article=2003090401&page=1 ) to get JDBC working but have had little luck.
I've downloaded JDBC from mySQL website, extracted the mysql-connector-java-3.1.13-bin.jar file and changed the class path to :
C:\Program Files\Java\jre1.5.0_06\lib\ext\mysql-connector-java-3.1.13-bin
which is where I placed the .jar file.
I then used the following code provided on stardeveloper.com to test a connection with the test database.
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
public class JdbcExample2 {
public static void main(String args[]) {
    Connection con = null;
    try {
      Class.forName("com.mysql.jdbc.Driver").newInstance();
      con = DriverManager.getConnection("jdbc:mysql:///test",
        "root", "secret");
      if(!con.isClosed())
        System.out.println("Successfully connected to " +
          "MySQL server using TCP/IP...");
    } catch(Exception e) {
      System.err.println("Exception: " + e.getMessage());
    } finally {
      try {
        if(con != null)
          con.close();
      } catch(SQLException e) {}
}It compiles but when run I get the error message :
java.lang.NoClassDefFoundError: testdatabase/JdbcExample2
Exception in thread "main"I assume this means that my classpath isn't setup correctly but I have no idea what's up and how to correct it.
Can someone PLEASE tell me how to setup jdbc and what I've done wrong.
Thanks in advance :)

Thanks for your reply. I've made some progress but I'm still having problems.
In mySQL I created a new user called uraknai with password n0121429 and granted them access to a test database I created called pet.
Then, in netbeans, I clicked the Runtime tab, clicked Databases and rightclicked Drivers and clicked Add Driver. I then added the driver mysql-connector-java-3.1.13-bin.jar. I then right clicked the newly added driver and selected the connect using option. I filled in the appropriate boxes clicked ok and it connected successfully.
Then, under the project tab, I right clicked the project name, clicked properties then clicked Libraries and added the .jar file mysql-connector-java-3.1.13-bin.jar
I then ran the following code to test the connection to the database:
import java.sql.*;
public class ConnectionTest {
    public ConnectionTest() {
    public static void main(String[] args)
        System.out.println("BEGIN CONNECTION TEST");
        Connection conn = null;
        try
               String userName = "uraknai";
               String password = "n0121429";
               String url = "jdbc:mysql://localhost/pet";
               Class.forName ("com.mysql.jdbc.Driver").newInstance ();
               conn = DriverManager.getConnection (url, userName, password);
               System.out.println ("Database connection established");
         catch (Exception e)
               System.err.println ("Cannot connect to database server");
         finally
               if (conn != null)
                   try
                       conn.close ();
                       System.out.println ("Database connection terminated");
                   catch (Exception e) { /* ignore close errors */ }
}and get the message:
java.lang.NoClassDefFoundError: math/ConnectionTest
Exception in thread "main"
Java Result: 1when I run the code.
Can someone explin what I've done wrong and how to fix the problem.
Cheers.

[SOLVED] Need help setting up cpufrequtils with Daemons.

Hello all. I'm running into this problem setting up power management tools on a Thinkpad T30. I've added acpi-cpufreq and cpufreq_ondemand to the rc.conf daemons but during boot I get the following errors.
/etc/rc.d/acpi-cpufreq: No such file or directory
/etc/rc.d/cpufreq_ondemand: No such file or directory
Last edited by philthy (2010-05-22 20:31:05)

philthy wrote:
evr wrote:acpi-cpufreq and cpufreq_ondemand are modules, they should be added in the modules section not the daemons section. cpufreq should be added to the daemons array.
Thanks for the reply. Lack of attention to detail on my part.
no worries, glad to help

Setting up VPN with OS X Server/Netgear FVS318 and remote offices

I am a newbie to VPN and am hoping someone can help get the config right. We have an Xserve (Server 10.4) and a range of G5's (OS 10.4) in 3 remote offices and want to setup a VPN between the remote offices back to the xServe. All 3 remote office are behind their own WGT624 router. Our setup looking like this:
Remote Office G5 (OS 10.4)
|
|
Netgear WGT624 (with dynamic IP address supplied by ISP)
|
|
Cable Modem
|
|
**INTERNET**
|
|
Cable Modem
|
|
Netgear FVS318 (v1) with static IP of 61.xxx.xxx.xxx
|
|
xServe (OS X 10.4 Server)
Can someone please walk me through the setup we need at head office and how we setup the branch office.
Thanks

Hi,
1701
UDP
L2TP
l2f
Mac OS X Server VPN service
1723
TCP
PPTP
pptp
Mac OS X Server VPN service
Try L2TP

Need help setting up static NAT to internal server

One of my internal servers requires it to be available to the internet I am having a hard time allowing it to be NATed through my Ciscc 2801 router. It seems as though im missing something small. From what I can gather it seems as though its as issue with ACL, but im not sure. I have ran the following command: ip nat inside source static tcp 192.168.5.1 ***WAN IP Address*** 8443 extendable Then I tried to add it to the ACL
via this command: access-list 150 permit tcp any host ***WAN IP Address*** eq 8443
Here is a copy of my config. Please advise. Thanks.
IP    172.19.3.x
sub 255.255.255.128
GW 172.19.3.129
Ciscso 2801 Router
Current configuration : 11858 bytes
version 12.4
service timestamps debug datetime localtime
service timestamps log datetime localtime show-timezone
service password-encryption
hostname router-2801
boot-start-marker
boot-end-marker
logging message-counter syslog
logging buffered 4096
aaa new-model
aaa authentication login userauthen group radius local
aaa authorization network groupauthor local
aaa session-id common
clock timezone est -5
clock summer-time zone recurring last Sun Mar 2:00 1 Sun Nov 2:00
dot11 syslog
ip source-route
ip dhcp excluded-address 172.19.3.129 172.19.3.149
ip dhcp excluded-address 172.19.10.1 172.19.10.253
ip dhcp excluded-address 172.19.3.140
ip dhcp ping timeout 900
ip dhcp pool DHCP
   network 172.19.3.128 255.255.255.128
   default-router 172.19.3.129
   domain-name domain.local
   netbios-name-server 172.19.3.7
   option 66 ascii 172.19.3.225
   dns-server 172.19.3.140 208.67.220.220 208.67.222.222
ip dhcp pool VoiceDHCP
   network 172.19.10.0 255.255.255.0
   default-router 172.19.10.1
   dns-server 208.67.220.220 8.8.8.8
   option 66 ascii 172.19.10.2
   lease 2
ip cef
ip inspect name SDM_LOW cuseeme
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp
ip inspect name SDM_LOW udp
ip inspect name SDM_LOW vdolive
no ip domain lookup
ip domain name domain.local
multilink bundle-name authenticated
key chain key1
key 1
   key-string 7 06040033484B1B484557
crypto pki trustpoint TP-self-signed-3448656681
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3448bb6681
revocation-check none
rsakeypair TP-self-signed-344bbb56681
crypto pki certificate chain TP-self-signed-3448656681
certificate self-signed 01
3082024F
            quit
username admin privilege 15 password 7 F55
archive
log config
hidekeys
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key XXXXX address 209.118.0.1
crypto isakmp key xxxxx address SITE B Public IP
crypto isakmp keepalive 40 5
crypto isakmp nat keepalive 20
crypto isakmp client configuration group IISVPN
key 1nsur3m3
dns 172.19.3.140
wins 172.19.3.140
domain domain.local
pool VPN_Pool
acl 198
crypto isakmp profile IISVPNClient
   description VPN clients profile
   match identity group IISVPN
   client authentication list userauthen
   isakmp authorization list groupauthor
   client configuration address respond
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map Dynamic 5
set transform-set myset
set isakmp-profile IISVPNClient
qos pre-classify
crypto map VPN 10 ipsec-isakmp
set peer 209.118.0.1
set peer SITE B Public IP
set transform-set myset
match address 101
qos pre-classify
crypto map VPN 65535 ipsec-isakmp dynamic Dynamic
track 123 ip sla 1 reachability
delay down 15 up 10
class-map match-any VoiceTraffic
match protocol rtp audio
match protocol h323
match protocol rtcp
match access-group name VOIP
match protocol sip
class-map match-any RDP
match access-group 199
policy-map QOS
class VoiceTraffic
    bandwidth 512
class RDP
    bandwidth 768
policy-map MainQOS
class class-default
    shape average 1500000
service-policy QOS
interface FastEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0$$FW_INSIDE$
ip address 172.19.3.129 255.255.255.128
ip access-group 100 in
ip inspect SDM_LOW in
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface FastEthernet0/0.10
description $ETH-VoiceVLAN$$
encapsulation dot1Q 10
ip address 172.19.10.1 255.255.255.0
ip inspect SDM_LOW in
ip nat inside
ip virtual-reassembly
interface FastEthernet0/1
description "Comcast"
ip address PUB IP 255.255.255.248
ip access-group 102 in
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map VPN
interface Serial0/1/0
description "Verizon LEC Circuit ID: w0w13908 Site ID: U276420-1"
bandwidth 1536
no ip address
encapsulation frame-relay IETF
frame-relay lmi-type ansi
interface Serial0/1/0.1 point-to-point
bandwidth 1536
ip address 152.000.000.18 255.255.255.252
ip access-group 102 in
ip verify unicast reverse-path
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
frame-relay interface-dlci 500 IETF
crypto map VPN
service-policy output MainQOS
interface Serial0/2/0
description "PAETEC 46.HCGS.788446.CV (Verizon ID) / 46.HCGS.3 (PAETEC ID)"
ip address 123.252.123.102 255.255.255.252
ip access-group 102 in
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
encapsulation ppp
crypto map VPN
service-policy output MainQOS
ip local pool VPN_Pool 172.20.3.130 172.20.3.254
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 50.00.000.110 track 123
ip route 0.0.0.0 0.0.0.0 111.252.237.000 254
ip route 122.112.197.20 255.255.255.255 209.252.237.101
ip route 208.67.220.220 255.255.255.255 50.78.233.110
no ip http server
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip flow-top-talkers
top 20
sort-by bytes
ip nat inside source route-map COMCAST interface FastEthernet0/1 overload
ip nat inside source route-map PAETEC interface Serial0/2/0 overload
ip nat inside source route-map VERIZON interface Serial0/1/0.1 overload
ip nat inside source static tcp 172.19.3.140 21 PUB IP 21 extendable
ip access-list extended VOIP
permit ip 172.20.3.0 0.0.0.127 host 172.19.3.190
permit ip host 172.19.3.190 172.20.3.0 0.0.0.127
ip radius source-interface FastEthernet0/0
ip sla 1
icmp-echo 000.67.220.220 source-interface FastEthernet0/1
timeout 10000
frequency 15
ip sla schedule 1 life forever start-time now
access-list 23 permit 172.19.3.0 0.0.0.127
access-list 23 permit 172.19.3.128 0.0.0.127
access-list 23 permit 173.189.251.192 0.0.0.63
access-list 23 permit 107.0.197.0 0.0.0.63
access-list 23 permit 173.163.157.32 0.0.0.15
access-list 23 permit 72.55.33.0 0.0.0.255
access-list 23 permit 172.19.5.0 0.0.0.63
access-list 100 remark "Outgoing Traffic"
access-list 100 deny   ip 67.128.87.156 0.0.0.3 any
access-list 100 deny   ip host 255.255.255.255 any
access-list 100 deny   ip 127.0.0.0 0.255.255.255 any
access-list 100 permit tcp host 172.19.3.190 any eq smtp
access-list 100 permit tcp host 172.19.3.137 any eq smtp
access-list 100 permit tcp any host 66.251.35.131 eq smtp
access-list 100 permit tcp any host 173.201.193.101 eq smtp
access-list 100 permit ip any any
access-list 100 permit tcp any any eq ftp
access-list 101 remark "Interesting VPN Traffic"
access-list 101 permit ip 172.19.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 101 permit ip 172.20.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 101 permit ip 172.19.3.128 0.0.0.127 host 172.19.250.10
access-list 101 permit ip 172.19.3.128 0.0.0.127 host 172.19.250.11
access-list 101 permit tcp any any eq ftp
access-list 101 permit tcp any any eq ftp-data
access-list 102 remark "Inbound Access"
access-list 102 permit udp any host 152.179.53.18 eq non500-isakmp
access-list 102 permit udp any host 152.179.53.18 eq isakmp
access-list 102 permit esp any host 152.179.53.18
access-list 102 permit ahp any host 152.179.53.18
access-list 102 permit udp any host 209.000.000.102 eq non500-isakmp
access-list 102 permit udp any host 209.000.000.102 eq isakmp
access-list 102 permit esp any host 209.000.000.102
access-list 102 permit ahp any host 209.000.000.102
access-list 102 permit udp any host PUB IP eq non500-isakmp
access-list 102 permit udp any host PUB IP eq isakmp
access-list 102 permit esp any host PUB IP
access-list 102 permit ahp any host PUB IP
access-list 102 permit ip 72.55.33.0 0.0.0.255 any
access-list 102 permit ip 107.0.197.0 0.0.0.63 any
access-list 102 deny   ip 172.19.3.128 0.0.0.127 any
access-list 102 permit icmp any any echo-reply
access-list 102 permit icmp any any time-exceeded
access-list 102 permit icmp any any unreachable
access-list 102 permit icmp any any
access-list 102 deny   ip any any log
access-list 102 permit tcp any host 172.19.3.140 eq ftp
access-list 102 permit tcp any host 172.19.3.140 eq ftp-data established
access-list 102 permit udp any host SITE B Public IP eq non500-isakmp
access-list 102 permit udp any host SITE B Public IP eq isakmp
access-list 102 permit esp any host SITE B Public IP
access-list 102 permit ahp any host SITE B Public IP
access-list    102 permit tcp any host public ip eq 8443
access-list 110 remark "Outbound NAT Rule"
access-list 110 remark "Deny VPN Traffic NAT"
access-list 110 deny   ip 172.19.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 110 deny   ip 172.19.3.128 0.0.0.127 172.19.10.0 0.0.0.255
access-list 110 deny   ip 172.19.10.0 0.0.0.255 172.19.3.128 0.0.0.127
access-list 110 deny   ip 172.20.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 110 deny   ip 172.19.3.128 0.0.0.127 172.20.3.128 0.0.0.127
access-list 110 deny   ip 172.19.3.128 0.0.0.127 host 172.19.250.11
access-list 110 deny   ip 172.19.3.128 0.0.0.127 host 172.19.250.10
access-list 110 permit ip 172.19.3.128 0.0.0.127 any
access-list 110 permit ip 172.19.10.0 0.0.0.255 any
access-list 198 remark "Networks for IISVPN Client"
access-list 198 permit ip 172.19.3.0 0.0.0.127 172.20.3.128 0.0.0.127
access-list 198 permit ip 172.19.3.128 0.0.0.127 172.20.3.128 0.0.0.127
access-list 199 permit tcp any any eq 3389
route-map PAETEC permit 10
match ip address 110
match interface Serial0/2/0
route-map COMCAST permit 10
match ip address 110
match interface FastEthernet0/1
route-map VERIZON permit 10
match ip address 110
match interface Serial0/1/0.1
snmp-server community 123 RO
radius-server host 172.19.3.7 auth-port 1645 acct-port 1646 key 7 000000000000000
control-plane
line con 0
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
transport input telnet ssh
scheduler allocate 20000 1000
ntp server 128.118.25.3
ntp server 217.150.242.8
end

If you are planning to use the fa0/1 interface IP itself then the configuration would be:
ip nat inside source static tcp 172.19.3.133 8443 interface fa0/1 8443 extendable
Assuming that you would like to port forward TCP/8443.
Then the ACL should be written:
ip access-list extended 102
2 permit tcp any host eq 8443

"it's always DNS" - Need Help setting network/DNS settings for MacMini Serv

Well, I must admit defeat and ask for help. I've set up an Xsan or 2, but for the life of me cannot set up my mac mini server. My basic two problems seem to be these:
1) Service Order in System Preferences/Network
I want to run my private LAN through Ethernet, using a 10.1.17. IP range, and use my Airport Extreme Base Station (Technically a Time Capsule) for the Public ISP 192.168.1 DHCP service. Cannot get both to work. The only way I can get the server to work and to be able to login using Open Directory is to either set the Ethernet as Primary for both my client and server, in which case there is no internet service AT ALL for either. I have a sneaking suspicion it has something to do with either DNS or a few extra DNS entries in the ethernet or airport categories, but for the life of me I cannot find the right combination. Is there any way to have BOTH Ethernet LAN and Airport internet service?
2) Related to the first question, I think, is that my local FQDN (not registered, just meant for internal LAN use only right now) and DNS name only show up to my client computer in Server Admin, Directory Utility, Workgroup Manager if I DISABLE my airport card. Otherwise, they come up as <servername>.local and not the FQDN <servername>.editdog.com, and I cannot login using OD.
3) I'm not sure what happend to the Binding I used to have to do in OSX Server 10.5, but maybe that's the issue? I have the Peachpit OSX Server Essentials Book, and it's been less than helpful.
Any ideas out there?

bump

Need help setting up an Oracle BPA Local Server

I would like to make my computer the server and enable other users to connect to my Oracle BPA database. Is there an easy way to setup my computer? I tried having another user add my IP address as the server location using the "Add Server" option in the menu but that did not work. Do I need to change any settings?
Thanks!
Edited by: user10990394 on Apr 21, 2009 1:35 PM

Hi,
The Business erver / Repository Server is not the part of Oracle BPA offering as of now
Oracle calls Business Server as Repository Server. And its different product and need a different licenses
And the bad news is it isnt avaliable any where else for download.
the products in Oracle BPA package are originally part of IDS Scheer's ARIS product range.
And IDS does not gives any evaluation copies (atleast in india), thanks to Oracle that they have made BPA suite avaliable for evaluation.
So if you wish to experiment with Repository Server you have two ways either buy it from IDS or wait for Oracle to offer the evaluation version, i wont suggest buying something that you havnt tried :)
Gaurav Sharma :)

Need help setting up and configuring rsync

Hello
I need help setting up, or rather configuring rsync to sync data between my brand new iMac and my Macbook Air.
Here is what I would like to:
- I want all of the files on both machines to be an exact mirror or copy of each other. Basically I have an iMac for at home, and then a Macbook Air for the road.
- The main folder on both Macs is called 'Sara' and I want the contents (mainly the 'movies' folder, 'music' folder, 'documents' folder and 'pictures' folder) to immediately sync up with each other when both of them are on my home network.
- this means if I'm working on a file at home on my Macbook, it will immediately write to the same directory on my iMac and vice versa (if I'm working on file(s) on my iMac, it will immediately save the contents to my Macbook). This way, if I'm working on last minute project my iMac, and then have to head out the door to the airport, the file is immediately saved to my Macbook (no usb for USB transfer).
- hopefully this makes sense??
Any help is greatly appreciated!
Thanks

It's a lofty but unrealistic goal. Rsync does not run automatically. There is no realistic method of instantaneously synching two computers over the internet or even on a LAN.
I would suggest you might try using Synk Pro which, in theory, can keep two devices in sync when they are both on the same network (and both have shared and mounted drives.)
If you must do this with rsync then I suggest a Google search for rsync tutorials.

Need help - I2C write/read with TAOS TCS3414 light sensor using USB-8451

Hello, I'm new to labview and need help setting up a vi that will allow me to communicate with a digital light sensor (TAOS TCS3414) using a USB-8451. I need to use the sensor to measure light from a light source that I designed and built as part of a project im working on. I've tried looking at several labview I2C exampled but find them to be very confusing. I've used an arduino to interface with the sensor successfully but need to use labview and dont understand how to write the program. The actions are simple; I need initialize the sensor with a simple command and then request data from 8 data registers and then read that data. The data will then be used in further calculations. The portion i need help with is writing and reading from the sensor. I've attached the datasheet for the sensor as a guide. I can also provide the arduino code that i use to read data from the sensor if that would help.
Pleae keep in mind that i am completely new to labVIEW. I really do want to learn from this but need quick results so the more help the better. It would greately appreciate any help or explaination.
Attachments:
TCS3414_Datasheet_EN_v1.pdf ‏1806 KB

Hi Aaron,
Here you go, this is made with a USB-8452.
When you run the code tick the power en dac enable box on.
Maybe you can help me with my problem, I want to use a fiber to sense light from a led.
Do you use any fiber hardware with the TCS3414?
gr,
Attachments:
TCS3414.vi ‏63 KB

Need help setting up VPN with OS X Server 2.2

Similar Messages

Maybe you are looking for