Need help showing singles and albums after searching for them In I Tunes 11 Win 7
Just got I tunes 11 iusing Win 7 and when I add songs and search for them in the upper right hand corner the album or the song appears. NowI need to view the single so I can add info. But I cannot figure out where to click to jump to that single shown in the main display or the album shown in the main display window. Can somebody please help me? What to you click on? Thanks in advance. Also where are your playlists?
I wanted to bring closure to this unanswered thread. I came to realize that I put way too much into that post (information overload) and couldn't possibly expect for anyone to take on such a compilation of driver issues all at once. I later put each issue into separate threads and then got the help I needed. I learned how to find out what the Hardware ID was for each one and got the appropriate software driver to match.
Kudos go to Jerry_Lippey who helped me out in so many ways plus gave me the link to a page where I learned how do do this myself.
That can be seen here: How to identify an unknown device (e.g. Wireless LAN module)?
And, you can look up Hardware ID's here: PCI Vendor and Device Lists
I hope this helps someone in the future who is the same boat that I was once in.
Similar Messages
-
When i click on 'Show all in Finder' after searching for anything on spotlight, NOTHING happens! NO Finder window opens up and the spotlight dropdown menu just shuts! Please help!
I'm having the same problem in other places as well, for example when i downloaded Easyfind right now, clicking the small magnifying glass button on the right of the file name (shown below) would usually open up finder highlighting the file, but now nothing happens when i click on that button!
Is there a solution for this, as this was a very useful feature which i used ALL the time? -
when i got to general and software update, the update wont show up and it sais searching for update forvever. Help?
Hi spolinski1,
Thanks for visiting Apple Support Communities.
You may find the tips in this article helpful with completing your iOS update:
Resolve issues with an over-the-air iOS update
http://support.apple.com/kb/TS4431
Best Regards,
Jeremy -
I NEED HELP! IPOD AND ALBUM ARTWORK ISSUES
I can use the music store and surf the internet fine. BUT, I try to use the ministore and with the new itunes, update mmy ipod and download album artowrk, it says itunes cannot connect, please make sure my connection is active. I tried the network diagnostics and it said network failed, but in the report, it says it connected to the music store. I dont understand, this shouldnt be because I can use the music store no problem. What is odd is on my other accounts on the computer, this issue doesnt exist. I dont recall changing any settings. Can someone help please?
You can get album artwork from various other sources as well as Amazon. You can even locate artwork using Google image search by using the artist or album name. I find this site is a good source of artwork: CD/Album Cover Art Search from SlothRadio.
Locate the album from any of those sources, right click on the image and save it to the desktop, once it's there drag it to the iTunes artwork pane. Once you've added the artwork you can either delete the original file or keep it in a folder somewhere in case you need to use it again. Alternatively there are programs like these that help locate artwork: iTunes Art Importer or MP3 Tag -
.Im trying to download the new itunes so i can use my iphone 5 , however , the new itunes requires Mac OS X 10.6.8 or later and i cant seem to install that onto my imac even after searching for the new update (my imac is currently on 10.5.8.
You have already seen that you cannot load the new iTunes into your 10.5.8, so as Neil says, you need Snow Leopard (current cost £14). And you'll probably need to update the disc you buy via the combo update, though that is free.
As far as the new iTunes is concerned, there's been a certain amount of grumbling so you may want to study the forums before you update. The main problem has been with album artwork which does not transfer easily. -
I need help buying iPhoto photo album.
I need help buying iPhoto photo album. iPhoto was built in to my iMac. I am supposed to be able to make picture albums using my photos. It won't let me purchase the photo album i just made. I can't find any kind of help anywhere. Please help
If you have iPhoto '08 or older it is no longer supported for print products
If you have iPhoto '09 or '11 reboot, launch iphoto and
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
If the preview s good and you can not order boot into safe mode, preview again and order
LN -
New Laptop w Vista - Need help transfering Palm and other software to Vista
I got a new laptop that runs Vista. My Palm TX has been the Palm and all other software fine on my Windows XP desktop computer.
How do I move all my Palm info over to the laptop without starting a lot of problems.
Will I still be able to sync my Palm on both my desktop Windows XP and my Vista laptop?????
Can someone please give me a step by step guide for this procedure:
Thanks for the help and advoe
JoAnne
Post relates to: Tungsten T3To sync on your new 32-bit desktop you will need to download the Vista-compatible Palm Desktop 6.2.
You will also need to install Documents To Go v.10 on the new desktop as well...should be fine with Vista. From what I've seen of Beyond Contacts, you will need to upgrade to 3.0083 to gain Vista support. I don't know if that's a paid upgrade or not.
If any of your other third-party apps also have a desktop component or install a conduit for synchronization, you'll need to check with each of them to verify compatibility with Vista and Palm Desktop 6.2.
When you connect to the new computer for the first time after you install Palm Desktop software, just select the TX's current Hotsync ID to sync with, and the data on the TX should automatically migrate into your new installation. But it's always best to be safe rather than sorry. Get a copy of NVBackup (google and download from any legit source such as www.palmgear.com ), and run a complete backup onto a SD card. That way, you'll be minutes away from a full Restore if anything does happen in the transition.
Lastly, if you plan to sync with your two computers, you will need to be careful and only use one of them for full 2-way synchronization, and use the other purely as a clone to hold a copy of the data on the handheld, using Handheld Overwrites Desktop conduit settings on that second computer. Otherwise data corruption is sure to result. This Palm Knowledgebase Article discusses how to Hotsync one device on two different desktops:
http://tinyurl.com/kq4c5
Good luck, let us know how it turns out.
Post relates to: None
Message Edited by smkranz on 01-21-2009 11:14 AM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android -
Need Help, i have an Ipad2 after 6.3.1 update, i have no cameras, or e-mail, I already reset, multiple times, but no improvment, can anyone help?
When you say reset, do you mean a reboot by holding both the power and home buttons until the apple logo appears, ignoring the red slider if it appears?
-
Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!
That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer. -
Need Help: MSI GT780R Black Screen After BIOS UPDATE,
Hi,
I descided to update my bios since it wasnet updated,
and i found the BIOS and chooced the NON raid One. Downloaded made a Bootable USB Drive.
and Typed, Afudos.exe And E1761IMS.10H. and it started Updating and in the end it sayd updated.
i Restarted PC was working then next restart It was Blackscreen, i have since 3 days now reading forums how to fix but theirs not much.
i have tried removing the Red and Black Cable, that Reset CMOS Settings. it did work, but after Shutdown same blackscreen. tried this option again didn't work anymore.
i have also tried Updating Bios Blind but doesn't work either im pressing keys wrong. or im not getting into the USB Drive.
I really need help by someone who has had this issue themselves or handy with computer please i need help
Thank You!RX-8 Thanks for the reply,
No, i did not use flash.bat when i got to the point to write i wrote. Afudos.exe and E1761IMS.10H i watched a dude
when he made it on Youtube that's why i didn't include flash.bat.
whats the right BIOS Update for a GT780R MSI Laptop ?
is it the NON Raid System
or the Raid System one.
i got SSD 128GB Harddrive + 750GB Harddrives.
Any other ideas how i could fix my issue with blackscreen would be appreciated
thank you. -
HT201270 ITunes not Showing iPad and iPhone after IOS7 upgrade.
ITunes not Showing iPad and iPhone after IOS7 upgrade. I have reinstalled iTuned. Repaired services...etc
Hey Sliqueg,
There are a few troubleshooting articles that can help resolve the issue. Check them out here:
For Windows:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
For Mac OS X:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Sincerely,
Delgadoh -
I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?
What file format did you export it to?
-
Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?
Hi,
I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
Integration Gateway: General Connection Failed (158,10836)
This error is thrown when there is no valid response.
Possible errors include:
Bad gateway URL
Sync Service Timeout set and Service actually timed out.
Java exception thrown - Check Application Server for possible Java exceptionDo you have integration configured between the two systems? It sounds like you don't from the error. Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working. If you haven't done that, it's documented a hundred different places.
http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/ -
I need help in downloading and installing a previously purchased version of Photoshop Elements 12: AD012822594 1057-0247-4177-3303-6451-8067 or 1057-0904-6949-7119-8323-9165
Please do not share serial numbers or Order numbers on Forums . Serial numbers and order numbers are very confidential.
You can only share serial number with Adobe Customer support staff. -
I need help in downloading and installing a previously purchased version of Photoshop Elements 12: <Serial number removed by moderator>
Hi There,
Kindly try: Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
Thanks,
Atul Saini
Maybe you are looking for
-
Hi, In FB60 normally for single line item their will be one tax code and two line items can book two different tax codes. My client is having the requirement like.For a single line item want to have two tax codes.How can i achieve this.If i want to
-
Hello, I recently noticed a very small bug crawling on what I though was the front of my display. I tried to brush it off but it seems as if it is inside the display, I'm not sure at what level. I was wondering if anyone has had anything like this ha
-
Dreamweaver CS 6. CSS Styles Greyed Out
When I view the ALL drop down menu in the CSS Styles panel I do not see any casading CSS styles. I have just brought a new defined CCS layout in and can view the Current drop down menu but when I got to the All style option it appears grayed out and
-
Formatted Search formula result in 4 digit
Hi Experts, Can we round the the result of formatted search formula into 4 digits ? See sample below SELECT (325.000000 * 0.750000 ) / 100 from inv1 Current result 2.44* * Result should be
-
Authoring Environment (LSO AE 600) Configuration
HI All, I am SAP NetWeaver Administrator and I am new to eLearning Solutions. I have done the installation of the following: On JAVA (new box) SAP Web AS Java 7.0 / EP 7.0 (Including KM) Content Player (LSOCP 600) BP for Learning Collaboration (BPLEA