Need help silencing an ALSA warning printf: The dmix plugin supports o

ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
I get this when running espeak. I think espeak is doing nothing wrong; the problem is likely with the configuration files that were installed on my system as part of installing ALSA.
I have not changed them at all, and the sound card is your run-of-the-mill Intel HD Audio with a Realtek codec.
Something in some configuration file causes dmix or ALSA to print this warning, probably somewhere in /usr/share/alsa. But I can't figure out where. Any ideas?

See config in my sig, and its "capture.pcm" line.

Similar Messages

I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried. Can you help? thank

I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
Can you help? thank

revert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.

Hi i need help one of my key on the keyboard dosen't work for some reason please help

hi i need help one of my key on the keyboard dosen't work for some reason please help

try smc reset
http://support.apple.com/kb/ht3964
and Pram reset
http://support.apple.com/kb/ht1379
(Try pram a few times to get correct sequence)
Check what you have selected in
system preferences/system/accessibility/keyboard
and system preferences/hardware/keyboard (keyboard and keyboard short cuts tabs)

I need help writing a script that finds the first instance of a paragraph style and then changes it

I need help writing a script that finds the first instance of a paragraph style and then changes it to another paragraph style. I don't necessarily need someone to write the whole thing, by biggest problem is figuring how to find just the first instance of the paragraph style. Any help would be greatly appreciated, thanks!

Hi,
Do you mean first instance of the paragraph style
- in a chosen story;
- on some chosen page in every text frames, looking from its top to the bottom;
- in a entire document, looking from its beginning to the end, including hidden layers, master pages, footnotes etc...?
If story...
You could set app.findTextPreferences.appliedParagraphStyle to your "Style".
Story.findText() gives an array of matches. 1st array's element is a 1st occurence.
so:
Story.findText()[0].appliedParagraphStyle = Style_1;
//==> this will change a paraStyle of 1st occurence of story to "Style_1".
If other cases...
You would need to be more accurate.
rgds

New airport user need help setting up a pc on the network

went and bought a airport extream today and my mac works fine on it but i also have a pc and need help getting it to work with the airport express. it seems to see the airport in the network slection screen but after i put in the pass i get nothing and it returns to the "chose a wireless network" can anyone help?

Thanks for the reply.
That's interesting, I guess I had assumed that would be a basic thing.
Right now the 4000 number is in port 1, and then 4244 is in port 2. So if no one else is on the phone, and my boss picks up his phone, dials 9 then XXX-XXXX, he will be routed outbound on the 4000 line on port 1. Then while he's talking, if I pick up the phone and dial 9 then XXX-XXXX, I will be routed out on the 4244 line on port 2.
Am I understanding that correctly?
If that is the case, then that is a bit frustrating. Our 4000 line has everything on it, call waiting, caller id, long distance, etc. But the 4244 line is just a basic service. So if I'm calling local or toll free, I don't want to tie the other line up in case someone else needs to make a long distance call to a client. Is there any work around to that at all? Is there any way to use steering digits to point the call to the right line? Would we have to put the PSTN lines on seperate SPA400's?
Again, any comments and suggestions are much appreciated!
Message Edited by VoIP_Me on 07-30-2008 06:27 AM
Message Edited by VoIP_Me on 07-30-2008 06:28 AM

I NEED HELP!! Been calling since the end of Nov and being charged for a Warranty device. The device was returned the next day!! Been calling twice a week.. NEED RESOLUTION

I NEED HELP!! Been calling since the end of Nov and being charged for a Warranty device. The device was returned the next day!! Been calling twice a week.. I NEED HELP 6 TCC TICKETS HAVE BEEN OPENED - PROMISED CALLS BACK AND NEVER GET CALLS.
About to cancel my account and move to AT&T
TCC TICKETS: (removed)
I am trying here for the last resort. After this evening my account along with my business account will be cancelled. Total lines that Verizon will have lost will be 93 lines.
PLEASE SOMEONE JUST HELP ME!!!!
I already tweeted and facebook messaged Verizon. Your CS group has gone down hill over the last 3-6 months. I use to enjoy being a customer.
>> Edited to comply with the Verizon Wireless Terms of Service <<

not all the lines have ETF's. I have 30 tablets and the rest phones. The phones have ETFs and the tablets are all month to month.
The total to move my account over is going to come out to about $8500.
Rep has been trying to get my business for years. I was always loyal to Verizon until this happened.

[svn:fx-trunk] 11454: ASyncList class ASDoc change: added explicit warning about the lack of support for re-inserting pending items .

Revision: 11454
Author:   [email protected]
Date:     2009-11-04 18:17:33 -0800 (Wed, 04 Nov 2009)
Log Message:
ASyncList class ASDoc change: added explicit warning about the lack of support for re-inserting pending items.
QE notes:
Doc notes:
Bugs:
Reviewer:
Tests run:
Is noteworthy for integration:
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/AsyncListView.as

Need help to draw a graph from the output I get with my program please

Hi all,
I please need help with this program, I need to display the amount of money over the years (which the user has to enter via the textfields supplied)
on a graph, I'm not sure what to do further with my program, but I have created a test with a System.out.println() method just to see if I get the correct output and it looks fine.
My question is, how do I get the input that was entered by the user (the initial deposit amount as well as the number of years) and using these to draw up the graph? (I used a button for the user to click after he/she has entered both the deposit and year values to draw the graph but I don't know how to get this to work?)
Please help me.
The output that I got looked liked this: (just for a test!) - basically this kind of output must be shown on the graph...
The initial deposit made was: 200.0
After year: 1        Amount is: 210.00
After year: 2        Amount is: 220.50
After year: 3        Amount is: 231.53
After year: 4        Amount is: 243.10
After year: 5        Amount is: 255.26
After year: 6        Amount is: 268.02
After year: 7        Amount is: 281.42
After year: 8        Amount is: 295.49
After year: 9        Amount is: 310.27
After year: 10        Amount is: 325.78
After year: 11        Amount is: 342.07
After year: 12        Amount is: 359.17
After year: 13        Amount is: 377.13
After year: 14        Amount is: 395.99
After year: 15        Amount is: 415.79
After year: 16        Amount is: 436.57
After year: 17        Amount is: 458.40And here is my code that Iv'e done so far:
import javax.swing.*;
import java.awt.Color;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.RenderingHints;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.lang.Math;
import java.text.DecimalFormat;
public class CompoundInterestProgram extends JFrame implements ActionListener {
    JLabel amountLabel = new JLabel("Please enter the initial deposit amount:");
    JTextField amountText = new JTextField(5);
    JLabel yearsLabel = new JLabel("Please enter the numbers of years:");
    JTextField yearstext = new JTextField(5);
    JButton drawButton = new JButton("Draw Graph");
    public CompoundInterestProgram() {
        super("Compound Interest Program");
        setSize(500, 500);
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        amountText.addActionListener(this);
        yearstext.addActionListener(this);
        JPanel panel = new JPanel();
        panel.setBackground(Color.white);
        panel.add(amountLabel);
        amountLabel.setToolTipText("Range of deposit must be 20 - 200!");
        panel.add(amountText);
        panel.add(yearsLabel);
        yearsLabel.setToolTipText("Range of years must be 1 - 25!");
        panel.add(yearstext);
        panel.add(drawButton);
        add(panel);
        setVisible(true);
        public static void main(String[] args) {
             DecimalFormat dec2 = new DecimalFormat( "0.00" );
            CompoundInterestProgram cip1 = new CompoundInterestProgram();
            JFrame f = new JFrame();
            f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            f.getContentPane().add(new GraphPanel());
            f.setSize(500, 500);
            f.setLocation(200,200);
            f.setVisible(true);
            Account a = new Account(200);
            System.out.println("The initial deposit made was: " + a.getBalance() + "\n");
            for (int year = 1; year <= 17; year++) {
                  System.out.println("After year: " + year + "   \t" + "Amount is: " + dec2.format(a.getBalance() + a.calcInterest(year)));
          @Override
          public void actionPerformed(ActionEvent arg0) {
               // TODO Auto-generated method stub
class Account {
    double balance = 0;
    double interest = 0.05;
    public Account() {
         balance = 0;
         interest = 0.05;
    public Account(int deposit) {
         balance = deposit;
         interest = 0.05;
    public double calcInterest(int year) {
           return balance * Math.pow((1 + interest), year) - balance;
    public double getBalance() {
          return balance;
class GraphPanel extends JPanel {
    public GraphPanel() {
    public void paintComponent(Graphics g) {
        Graphics2D g2 = (Graphics2D)g;
        g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
        g2.setColor(Color.red);
}Your help would be much appreciated.
Thanks in advance.

watertownjordan wrote:
http://www.jgraph.com/jgraph.html
The above is also good.Sorry but you need to look a bit more closely at URLs that you cite. What the OP wants is a chart (as in X against Y) not a graph (as in links and nodes) . 'jgraph' deals with links and nodes.
The best free charting library that I know of is JFreeChart from www.jfree.org.

Need help in displaying error message on the same screen

Hi Experts,
I have written a report which gets called from IW52 by clicking one of the action items. Now in my report when I am trying display an error message it is getting displayed at the bottom of a blank screen. My requirement is to display it at the bottom of the IW52 screen, so that user can rectify the error.
Please help.
Regards,
Sambaran Ray.

Hi,
Probably you need to find a way to enhance the standard code.
But make one thing sure that the code (included bu you) gets fired only when that specific report is being executed. Else it may harm the standard functionality.
Hope this helps you.
Regards,
Tarun

Need Help in displaying data labels at the top of the bars in CFCHART

Hi,
I have a cfchart with two line series and one bar. I want to display the data values at the top of the bar and the line series. Below is the XML I am using:
<cfsavecontent variable="chartStyle">
<?xml version="1.0" encoding="UTF-8"?>
<frameChart is3D="false" isMultiline="true">
          <frame xDepth="12" yDepth="11" outline="black" stripColor="light_gray">
               <background maxColor="black"/>
          </frame>
<yAxis scaleMin="0" scaleMax="30">
               <labelFormat pattern="###"/>
<parseFormat pattern="###"/>
<labelStyle orientation="Horizontal"/>
<titleStyle font="Arial-11-bold" isMultiline="false"><![CDATA[
#Vehicles       ]]>
</titleStyle>
</yAxis>
<yAxis2 scaleMin="0" scaleMax="30">
               <labelFormat pattern="###"/>
<parseFormat pattern="###"/>
<labelStyle orientation="Horizontal"/>
<titleStyle font="Arial-11-bold" isMultiline="false"><![CDATA[
Profitability       ]]>
</titleStyle>
</yAxis2>
<dataLabels foreground="black" font="Arial-12-bold"/>
<legend allowSpan="true" equalCols="false" halign="Center" isMultiline="true" placement="Bottom"><decoration style="None"/></legend>
<elements place="Stacked" drawOutline="false">
<series index="1" place="Stacked">
<dataLabel style="value"/>
</series>
          <series index="2" place="Stacked">

</series>
<series index="3" place="Stacked">

</series>
<series index="0" place="Stacked" shape="Line" isSecondAxis="true">
<dataLabel style="value"/>
          </series>
<series index="1" place="Stacked" shape="Line" isSecondAxis="true">
<dataLabel style="value"/>
          </series>
</elements>
          <table>
               <heatmap isEnabled="false" minLevel="0.0" maxLevel="0.0"/>
          </table>
          <popup background="white" foreground="black"/>
          <paint isVertical="true" min="26" max="76"/>
          <insets right="5"/>
</frameChart>
</cfsavecontent>
Can anyone please tell me what is the mistake i am doing.
Thanks in advance,
Jeevan Pulugu.

Hi,
Probably you need to find a way to enhance the standard code.
But make one thing sure that the code (included bu you) gets fired only when that specific report is being executed. Else it may harm the standard functionality.
Hope this helps you.
Regards,
Tarun

I need help Guys I might of deleted the Archive utility How do i get it back.

i Have a Mac Air Book OS X and i think i might of deleted the Archive utility How do i get it back please need help.

Why do you think you deleted it?

Need help parsing a long and passing the value.

I'm doing Cattle Drve 4b on javaranch.com (http://www.javaranch.com/say.jsp) and I need a bit of help.
I want to pass the reference of my num value to several small methods to work out the value printed. Here's the original code I did from 4a:
public class Say{
public static void main(String[]args){
int num = Integer.parseInt(args[0]); // parse argument from command line
String array[] ={"Zero", "One", "Two", "Three", "four", "five", "six","seven","eight",
           "nine","ten","eleven","twelve","thirteen","fourteen","fifteen","sixteen",
           "seventeen","eighteen","nineteen","twenty","thirty","fourty","fifty",
           "sixty","seventy","eighty","ninety"};     //initialize the array
//start check for value
if(num<21)
System.out.println("\n" + array[num]);
                                        // \n is added before
else if(num<30)                                   // each result for a
System.out.println("\n" + array[20]+ "-" + array[(num-20)]);     // cleaner output
else if(num<40)
System.out.println("\n" + array[21]+ "-" + array[(num-30)]);
else if(num<50)
System.out.println("\n" + array[22]+ "-" + array[(num-40)]);
else if(num<60)
System.out.println("\n" + array[23]+ "-" + array[(num-50)]);
else if(num<70)
System.out.println("\n" + array[24]+ "-" + array[(num-60)]);
else if(num<80)
System.out.println("\n" + array[25]+ "-" + array[(num-70)]);
else if(num<90)
System.out.println("\n" + array[26]+ "-" + array[(num-80)]);
else if(num<100)
System.out.println("\n" + array[27]+ "-" + array[(num-90)]);
//endFor 4b I need to be able to print out values in the billions, so I was going to create a few methods to keep it clean like so:
public class billion (long (int num)
{ if( num<9 billion)
     num-= 8 billion
System.out.print("eight billion ");
else if(num<8 billion){
num-= 7 billion
System.out.print("seven billion ");
....etc
return num;
public class million...
public class thousand...
etc.And the current main section will be moved into a new "tens" class.
I'm running into two problems though.
1. How do you parse a long? I know integers are like so:
int num = Integer.parseInt(args[0]); are longs the same?
like:
long num = Long.parseLong(args[0L])if not, how can I do it?
2. how do I properly pass num to all the methods? I'm going to make num a public int and make the methods public because that seems simplest, but can I pass num to the method and then return the new value of num back to main?
BTW, I'll be removing the carriage return from the beginning of the "tens" class when all is said and done so the results don't end up printing on multiple lines.
Thanks in advance everyone.

The L suffix is used to identify a Long literal.
The index of the args[] array does not need to be specified as a Long.
Solong num = Long.parseLong(args[0]);will suffice. You might want to put that in a try/catch block to catch the NumberFormatException that will be thrown if args[0] cannot be parsed to a long value.
Various ways to update the value of num in the methods of the same class:
Simplest of all: declare num as an instance variable. The methods simply access and assign its value.
Other ways:
-- pass num as a parameter to the method.
-- return the value of num from the method (provided the method doesn't have to return any other value)
-- Have a getNum() method return the value of num
-- Have setNum() method to update the value of num
db
What's that line? public class billion (long (int num)edit Typos, typos...
Also, the set/get approach with public access is the preferred method when used in the methods of another class.
Don't forget that the other class has to know whose set/get methods to call.
Message was edited by:
Darryl.Burke

On my MacBook Pro I forgot my user password and I didn't enable Apple ID recoveries and I urgently need help finding a way to recover the password.

I urgently require help in recovering my user password for my MacBook Pro on OS X Lion, I forgot my password and Apple ID recoveries aren't enabled and I can't enable them as I don't know my password and my hint didn't help me at all, I really, really need help!

Also, a solution may be found if you search in the "More Like This" section over in the right column.Solution may be found if you search in the "More Like This" section over in the right column.

HT201441 Need help here, a friend died and the family of his gave his ipad to us for our kids. I hooked it up to the computer and reset the ipad and it wont work again because it has find my iPad/iphone .

Need help here, a friend died from mesothelioma and his family gave his ipad to us for our children. I reset the ipad in iTunes on the computer and it has find my iPhone on it , now the ipad dont start or boot up again. How do I get for that because I am not able to get a hold of him obviously?

Just had an employee terminated most acrimoniously and had an iPhone 5C that was a brick. Apple support can help remove the lock. Better hold onto your original receipt and record the Serial# ! I do not mean the MEID or IMEI but the Serial# found on the original box or Settings>General>About. In my case no receipt or Serial#. 2 hours on the phone between Apple and Verizon and got what was needed. Submitted form and got reply to allow 2-10 business days.
Here is the form I had to complete and sent to [email protected]..
ORIGINAL SALES INFORMATION:
PRODUCT PURCHASE DATE:
INVOICE/RECEIPT NUMBER:
PRODUCT SERIAL NUMBER:
PRODUCT IMEI/MEID:
PRODUCT DESCRIPTION:
BUSINESS/INSTITUTION NAME:
REQUESTOR NAME/TITLE:
PHONE NUMBER:
STREET ADDRESS:
CITY:
STATE:
POSTAL CODE:
EMAIL ADDRESS:
UNLOCK AUTHORIZATION STATEMENT: I [YOUR NAME] representing
[BUSINESS/INSTITUTION NAME] authorize Apple, Inc. to unlock the devices listed.
Best regards,
The Apple Support Team

Hi i got the new ipod 5th generation and the new lifeproof case. its a lot different than what i expected. i really need help on how to put on the cover. i feel like if i dont put it on a certain way or its off by a little my device will break

i need help with my new lifeproof case

The instructions below may help.
http://www.lifeproof.com/en/support/products/ipod/user-guide/

Need help silencing an ALSA warning printf: The dmix plugin supports o

Similar Messages

Maybe you are looking for