Need help solving error generating a job running at crontab.

Hello everybody,
I have a job. Lets say xxx.sh
a part of the script connecting to oracle is as below.
STAT=`$CONN -s $USER_ID <<SQLPLUS_IN
set heading off feedback off serveroutput on trimout on
select open_mode from v\\$database;
SQLPLUS_IN
+`+
+if [[ `echo $STAT | awk '{ print $1 }'` = "READ" && `echo $STAT | awk '{ print $2 }'` = "WRITE" ]]; then+
echo "$ORACLE_SID is UP : $TIMESTAMP .... Procedding with Free Space Report " >> $FSRJLF
else
echo "$ORACLE_SID is DOWN !! : $TIMESTAMP ...Please rectify the problem and run Freespace report job" >> $FSRJLF
+$EXIT_1 $FSRJLF $ORACLE_SID $JOB_TYPE+
exit
fi
Its running fine when i run at [d002/oracle] ./xxx.sh
But if i schedule through crontab runs second option of if loop although the DB is up. when i echoed the contents of $STAT it is
+SP2-0306: Invalid option. Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}] where <logon> ::= <username>[<password>][@<connect_string>] | /+
and also its running fine in higher version of solaris.
current version i am running is solaris 8.
Please help.
Arun Kumar

user8853422 wrote:
Hi AJU,
I have set the env as follows now.
ORACLE_SID=CMSMAXDV
export ORACLE_SID
ORACLE_HOME=/d001/oracle/9.2.0.6
export ORACLE_HOME
PATH=/$ORACLE_HOME/bin:$PATH
export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib
export LD_LIBRARY_PATH
But it still giving the same error...
Please help
Arun KumarWHERE are you setting these? Maybe I missed it in previous discussion, but if it hasn't been pointed out, you need to understand that when a script is executed from cron, it does not automatically invoke your .profile. Any environment settings you want available to a script launched from cron need to be set explicitly in that script -- or be held in a script that is sourced from the scheduled script:
#!/bin/sh
#  file: /usr/local/bin/locvars
export ORACLE_BASE= .....
export ORACLE_HOME= ....
export ORACLE_SID= ...
# etc, etc, etc,
#!/bin/sh
#  file: mycronjob.sh
source /usr/local/bin/locvars
# -- do some work

Similar Messages

  • Need help solving Error 3005 using activex server and automation open.

    Hi,
    I am trying to use a master vi to call a slave vi by using the activex server option. The steps i have taken are:
    1. In the slave vi, go to advanced tab in build options and check enable activex server.
    2. After building the .exe go to the command prompt and type the path to the .exe followed by /RegServer. Ex: C:\slavevi\applicatoin.exe /RegServer. This will add it to the activex plugin list.
    2.a restart labview if it was open.
    3. In the master vi use automation open, create a constant for the automation refnum and right click it. Select browse. Browse to the name you chose in the enable activex server field from step 1. Choose “show creatable objects only” and pick the _application one.
     4. use an invoke node and connect automation open to it. Choose getVIReference. This will drill down to the actual vi you want to control.
    5. The path will be the install path + the vi name. Ex: \slavevi.exe\mainviname.vi.
    These steps actually worked on the machine that I built the vis on but if I build the exes and transfer them to another computer I get error 3005 when it tries to open the slave.exe program. In each instance the master and slave vis are both local (not trying to go through a network or anything). I have registered the slave.exe and .tlb file on the new computer, rebooted etc and nothing seems to work. I also tried running the master vi as source code but that didn't work.
    The master vi was originally built in labview 7.1 and the slave is built in LV 9.01 but I have since upgraded the master vi to 9.01 to try and resolve the problem.
    Is there something that happens during a build that needs to be replicated on the new computer?
    Thanks for any help.
    Solved!
    Go to Solution.

    Help needed ..
    am also getting this error 3005 in automation open in LV.
    i am trying to design a GPS software by integrating Google Earth Application in LV. i am successful in that. but when i am trying to use its properties like drawing a pilygon or point at particular longitude and latitude am getting error.
    I read that mass complie thing was for older LV versions.
    am using LV2009.
    Attached is the part of code thats creating trouble.
    Attachments:
    GE.JPG ‏19 KB

  • Need help solving Error = (-50)

    All right, so I recently purchased a movie off iTunes. About half way through the download, it stopps and gives me a "Err = (-50) Download has stopped" message. I tried restarting iTunes and my computer, and it's not really going away. My network connection is fine, and it honestly shouldn't have trouble finishing the download. I really hope I didn't just pay $15 to see half a movie. Does anyone know how to solve this error? Thanks for reading.

    Try Here  >  http://support.apple.com/kb/TS1583
    And See this Discussion...
    https://discussions.apple.com/thread/4204776?start=0&tstart=0

  • Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click

    Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    Copy a line of text in this window to the Clipboard.
    Paste into the window of another application.
    Wait for the test to run. It usually takes a few minutes.
    Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */  /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n  "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n  [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n  ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Error generating report job with the task name 'FSRM_Report_Task

    Since this morning we have been having a problem with FSRM on Windows Server 2008 R2, it is no longer running storage reports (both scheduled and on-demand).
    We get the following in the event logs:
    Log Name:      Application
    Source:        SRMREPORTS
    Date:          09/06/2014 08:09:55
    Event ID:      752
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      FILESERVER2.curriculum.riddlesdown.local
    Description:
    Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
    Context:
     - Exception encountered = Invalid argument: StorageType = '101'
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="SRMREPORTS" />
        <EventID Qualifiers="0">752</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-09T07:09:55.000000000Z" />
        <EventRecordID>42920</EventRecordID>
        <Channel>Application</Channel>
        <Computer>FILESERVER2.curriculum.riddlesdown.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
    Context:
     - Exception encountered = Invalid argument: StorageType = '101'
    </Data>
      </EventData>
    </Event>
    We have uninstalled and reinstalled the FSRM role service but are still having the same problem.
    Anybody have any ideas?

    Hi,
    From the error message, it failed because of "invalid argument: storagetype = '101' ".
    101 means the storage type is "system" + "cache". Is there any change on your storage before the issue occurs? For example whether the source storage is changed?
    FsrmStorageModuleType enumeration
    http://msdn.microsoft.com/en-us/library/dd392346(v=vs.85).aspx
    If you have any feedback on our support, please send to [email protected]

  • Need help w/ setting up ports to run a server for America's Army

    Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
    Q: How do I run my own server?
    A: Quick and dirty server info:
    1. Edit RunServer.bat to change the map.
    2. Run RunServer.bat
    Or:
    server.exe LAN MAPNAME.aao (Host a LAN game)
    server.exe global MAPNAME.aao (Host a Public game)
    Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
    There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
    [Engine.GameEngine]
    ServerActors=Andromeda.AndromedaMBS
    [Andromeda.Andromeda]
    GameServerIp=
    Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
    If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
    [Andromeda.AndromedaMBS]
    QueryPort=20025
    Punkbuster user fix correction.
    If [Engine.GameEngine] block has been changed to read as below:
    [Engine.GameEngine]
    ServerActors=IPDrv.AndromedaMBS
    Please add the following block to your INI file:
    [IpDrv.AndromedaMBS]
    QueryPort=20025
    (Last Updated: 2006-04-20)

    Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
    Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

  • Need help with error message 213:8

    Need help with error message 213:8, this error message prompted after re-installing CS5.5 on the same machine (W7 Pro)
    Thanks.

    Hi TKA_,
    Please try the solutions mentioned on following forum thread.
    http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
    Let me know if it works?
    Regards,
    Sumit Singh

  • I need help solving Latest Flash Player upgrade crashing issues.

    I recently upgraded my flash player at Adobe reccomendation. Now it crashes all the time. I need help solving this issue. I currently have Flash Version 11.5.502.135. My old version never crashed, not even once. I would be fine uninstalling the new version and going back to the older one but i cant find it.

    Could you please create a crash report? The following page has more information: http://helpx.adobe.com/flash-player/kb/report-flash-player-crash.html
    You can install Flash Player 11.4.402.287 version.
    Thanks,
    Sunil

  • I updated the new IOS 4.3.3 on my IPad, since then i Am having trouble accesesing any App. What happens is i cant enter it or other wise it closes as soon as i enter it...i need help solving tris inconvenient.

    I updated the new IOS 4.3.3 on my IPad, since then i Am having trouble accesesing any App. What happens is i cant enter it or other wise it closes as soon as i enter it...i need help solving tris inconvenient.

    I have the same problem and I haven't solved it yet. On Friday I plugged in my iPad to my work computer after not having done so for quite a while. Today I went onto the work computer and discovered I had not updated iTunes before plugging in the iPad (and which I cannot do without an administrator password). I guess I will update iTunes and try again when I can get the guy to show up with the password. I hope that works. The reset idea does not work on mine.
    Was your iiTunes updated before you tried? Have you found any solution yet? Mail and some internet apps still work but games, notes applications, spreadsheets etc. just begin to open and close immediately.
    If anybody has answers I'd love to get some clues.

  • Need help with error code 1714!!!!!!!!!!! Please help

    Need help trying to upgrade itunes for windows, i get to a certain point and the following error comes up "ERROR 1714: THE OLD VERSION OF ITUNES CANNOT BE REMOVED CONTACT YOUR TECHNICAL SUPPORT GROUP" i click ok and then another error comes up "ERROR 1603 FATAL ERROR" can anybody help Please!!!!!!!!!!!!!!!!!!!!

    hi wags!
    hmmmm. okay, let's try using the complete uninstallation instructions from the following document to remove your existing itunes and QT:
    Trouble installing iPod, iTunes, or QuickTime software in Windows
    if you do that first, will the new itunes install go through properly?
    if you get an error message on the uninstalls, let us know what it says. include error message numbers if you're getting any.
    love, b

  • I need help with error ORA-06502: numeric or value error

    Hi, all, i need help finding the error here, im getting a numeric or value error when i add information to the variable vlcadena when vlcadena is a clob type, and i check the length of the vlcadena variable and sometimes makes the error at 8000 characters some other times 32k i have no idea whats happening, does anyone have a clue?
    PROCEDURE REGISTRO_551 (
    VPNUMPARTE IN PARTESC.NUMPARTE%TYPE,
    VPFRACCION IN IMPOMAT.FRACCIONMEXIMPO%TYPE,
    VPDESCRIPCION IN PARTESC.DESCESPANOL%TYPE,
    VPVALORDLS IN IMPOMAT.VALORDOLARES%TYPE,
    VPCANTIDAD IN IMPOMAT.CANTIDAD%TYPE,
    VPUNIMED IN PARTESC.UNIMEDPARTE%TYPE,
    VPCANTIDADTARIFA IN IMPOMAT.CANTIDAD%TYPE,
    VPVALORAGREGADO IN EXPOPT.VALORAGREGADO%TYPE,
    VPPAISORIGEN IN PARTESC.PAISORIGEN%TYPE,
    VPCOMPVEND IN PARTESC.PAISORIGEN%TYPE,
    VPTIPOFRACCION IN IMPOMAT.TIPOFRACCION%TYPE,
    VPPESONETO IN IMPOMAT.PESONETO%TYPE,
    VPTIPOMONEDA IN MIMPOMAT.TIPOMONEDAEXTRANJERA%TYPE
    ) AS
    BEGIN
        vgproceso := 207310;
        vllong2:=length(vlCadena);
        vlCadena:=vlCadena||'551'||'|'; --1. TIPO DE REGISTRO
        vgproceso := 207311;
        vllong2:=length(vlCadena);
        vlCadena:=vlCadena||VPFRACCION||'|'; --2. FRACCION
        vgproceso := 207312;
        vllong2:=length(vlCadena);
        QUITA_ENTERS(NVL(VPDESCRIPCION,' '),VLTEMP);
        IF LENGTH(VLTEMP)>80 THEN
            VLTEMP:=SUBSTR(VLTEMP,1,80);
        END IF;
        vgproceso := 207313;
        vllong2:=length(vlCadena);
        IF VLTEMP IS NULL THEN
            vlCadena:=vlCadena||'|'; --3. DESCRIPCION
        ELSE
            vlCadena:=vlCadena||VLTEMP||'|'; --3. DESCRIPCION
        END IF;
        vgproceso := 207314;
        vllong2:=length(vlCadena);
        IF VPNUMPARTE IS NULL THEN
            vlCadena:=vlCadena||'|';--4. NO. DE PARTE
        ELSE
            vlCadena:=vlCadena||VPNUMPARTE||'|';--4. NO. DE PARTE
        END IF;
        vgproceso := 207315;
        vllong2:=length(vlCadena);
        vlCadena:=vlCadena||VPVALORDLS||'|'; --5. VALOR MERCANCIA
        vgproceso := 207316;
        vllong2:=length(vlCadena);
        vlCadena:=vlCadena||VPCANTIDAD||'|'; --6. CANTIDAD COMERCIAL
        vgproceso := 207317;
        vllong2:=length(vlCadena);
        IF VPUNIMED IS NULL THEN
            VPDESCERROR:='ALGUNA PARTIDA CON FRACCION '||VPFRACCION||' NO TIENE UNIDAD DE MEDIDA';
        END IF;
        vgproceso := 207320;
        GET_CATGRAL('ADUANAS','UNIMED',NVL(VPUNIMED,' '),CL_D1,CL_D2,CL_D3,CL_D4,CL_V1,CL_V2,CL_V3,CL_CATG);
        IF CL_V2=0 THEN
           vlCadena:=vlCadena||VPUNIMED||'|'; --7. UNIDAD MEDIDA COMERCIAL
        ELSE
            SELECT TO_CHAR(TRUNC(CL_V2)) INTO VLUMCOMERCIAL FROM DUAL;
            IF LENGTH(VLUMCOMERCIAL)=1 THEN
                VLUMCOMERCIAL:='0'||VLUMCOMERCIAL;
            END IF;
            vlCadena:=vlCadena||VLUMCOMERCIAL||'|'; --7. UNIDAD MEDIDA COMERCIAL
        END IF;
        vlCadena:=vlCadena||VPCANTIDADTARIFA||'|';--8. CANTIDAD TARIFA
        vlCadena:=vlCadena||VPVALORAGREGADO||'|';--9. VALOR AGREGADO
        GET_CATGRAL('ADUANAS','CONFADU','IVIN-REG',CL_D1,CL_D2,CL_D3,CL_D4,CL_V1,CL_V2,CL_V3,CL_CATG);
        vlCadena:=vlCadena||CL_D1||'|'; --10. VINCULACION
        vlCadena:=vlCadena||CL_D2||'|'; --11. METODO DE VALORACION
        vlCadena:=vlCadena||'|'; --12. MARCA
        vlCadena:=vlCadena||'|'; --13. MODELO

    If the expected maximum length of the concatenated string is less than 32K, then use VARCHAR2 and at the end convert to CLOB if necesary.
    :p
    PS: At what line in the code does it give the error?
    Edited by: LKBrwn_DBA on Aug 20, 2009 2:49 PM

  • Need help with error: No bootable device -- insert boot disk and press any key

    Hello, I need help will my laptop and the error, the message says "no bootable device ", I have tried taking out the hard drive but it still doesn't work. My laptop is a Satillite C55D-A5372. I need help with this; if you know about this ans know how to fix it please reply or email me @ [email protected]
    If needed more clarifications ask me.
    Thank you,
    Jkmano

    if you got into the bios/uefi and have determined that the hdd is being detected then that is good.  At least the hdd is operating to some extent, although still may be corrupt OS or the like.
    Eagle asked you what OS your using (i.e., Windows 8.1 64-bit, Windows 7 32-bit, etc.).  I see that English is not your native language so we'll just have to work with that as best we can. 
    Did you make any changes to the operating system (OS) as a result of the link you posted, and what were they? 
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • Need help with error code 150:30

    need help with finding out what error code 150:30 is and how to fix it

    See the following:
    Error 150:30 - Error "Licensing has stopped working" | Mac OS :
    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

  • Need help with error

    Need help figuing out why I'm getting the following error
    message trying to launch a training CBT and what to do to fix
    it...?
    Adobe Flash Player Security
    Adobe Flash Player has stopped a potentialy unsafe operation.
    Teh follwoing local application on your computer or netwrok:
    X:\XXXXXX\XXXXXX....\XXXXX
    is trying to communicate with this Internet-enabled location:
    X:\XXXXXX\XXXXXX....\XXXXX
    To let this application communicate with the Internet, click
    Settings,
    You must restart the application after changing your
    settings.

    <itunes:category text="TV & Film">
    <itunes:category text="TV & Film/></div>
    The two lines I've quoted above should be replaced with:
    <itunes:category text="TV & Film" />
    The "TV & Film" category has no subcategories so should be closed on it's own. See the example feed at http://www.apple.com/itunes/store/podcaststechspecs.html#_Toc526931673 which uses the TV & Film category.
    Hope this helps,
    Greg

  • Need help with error: XML parser failed: Error An exception occurred! Type:......

    <p>Need help with the following error.....what does it mean....</p><p>28943 3086739136 XML-240304 3/7/07 7:13:23 PM |SessionNew_Job1<br /><font color="#ff0000">28943 3086739136 XML-240304 3/7/07 7:13:23 PM XML parser failed: Error <An exception occurred! Type:UnexpectedEOFException, Message:The end of input was not expected> at</font><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM line <7>, char <8> in <<?xml version="1.0" encoding="WINDOWS-1252" ?><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfigurations><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfiguration default="true" name="Configuration1"><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <case_sensitive>no</case_sensitive><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <database_type>Oracle</database_type><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_alias_name1>ODS_OWNER</db_alias_name1><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_ali>, file <>.<br />28943 3086739136 XML-240307 3/7/07 7:13:23 PM |SessionNew_Job1<br />28943 3086739136 XML-240307 3/7/07 7:13:23 PM XML parser failed: See previously displayed error message.</p><p>Any help would be greatly appreciated.  It&#39;s something to do with my datasource and possibly the codepage but I&#39;m really not sure.</p><p>-m<br /></p>

    please export your datastore as ATL and send it to support. Somehow the internal language around configurations got corrupted - never seen before.

Maybe you are looking for

  • Sim City 4 For Mac or Windows?

    I just ordered my new Intel Macbook and was wondering will Sim City 4 for PC work on it or will I have to buy the Mac version? I dont want to use bootcamp or parallels. The salesman at my local Apple store said that the PC version should work on the

  • Tiger Upgrade issue

    iMac G4   Mac OS X (10.3.9)   I am looking for any help anyone might be able to offer on an upgrade to Tiger from Mac OS X 10.3.9. I just upgraded to the later from 10.2.8 with no problems. However, in attempting to reach the final summit to Tiger, I

  • JEditorPane - setPage

    How does one interrupt the loading of a HTML page in setPage of a JEditorPane? Have a situtation where clicking on different URL's should stop the loading of the previous page... Thanks Abraham Khalil

  • Windows explorer crashes while using Creative Cloud

    I am also experiencing this issue after using the creative cloud packager, installing the following applications. Bridge Acrobat Photoshop Illustrator Indesign English (US) as the language Windows 7 Pro x64 When I run the installer package, about 5 m

  • Font size in drop-down fill in the blank quiz questions.

    I've migrated an old Quiz from Captivate 4 to Captivate 5. All went reasonably well except for the fill-in-a-blank questions. Fortunately there are only relevatively few of these, but I've encountered a strange problem when I started to do this. I've