NEED HELP ( sound doesn't work )

Hello, i such a problem:
i've bought a new computer P4 MSI motherboard whith OB sound card.
After installing windows,my speakers doesn't work.In hardware devices there are 3 quastion signs :
? other divices
? Ethernet controller
? multimedia controller
I tried to use update driver ( unistall and install too) but it didn't
solve the problem.
What can i do ?

Go into your BIOS settings .......Integrated Peripherals and "Enable":
1. On Board Audio Chip
2. AC 97 Audio ( whatever you have)
* Verify your speakers are connected to the correct audio outputs.
** If the above is ok..... you should be able to install your drivers in 'Device Manager' in conjuction with your MSI CD as stated earlier.

Similar Messages

Mplyer sound doesn't work, instead amarok's sond work !!!

hi everyone, the problem is that mplayer's sound doesn't work.
the sound with Amarok and Firefox(e.g youtube) works, but with mpalyer no !!!
i've posted some commands:
thanks
/etc/mplayer/
codecs.conf example.conf input.conf
/etc/mplayer/example.conf
# MPlayer configuration file
# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
# and per-user from ~/.mplayer/config, where per-user settings override
# system-wide settings, all of which are overrriden by the command line.
# The configuration file settings are the same as the command line
# options without the preceding '-'.
# See the CONFIGURATION FILES section in the man page
# for a detailed description of the syntax.
# Profiles should be placed at the bottom of the configuration file to ensure
# that settings wanted as defaults are not restricted to specific profiles.
# video settings #
# Specify default video driver (see -vo help for a list).
#vo=xv
# Use SDL video with the aalib subdriver by default.
#vo = sdl:aalib
# FBdev driver:
# mode to use (read from fb.modes)
#fbmode = 640x480-120
# location of the fb.modes file
#fbmodeconfig = /etc/fb.modes
# Specify your monitor timings for the vesa and fbdev video output drivers.
# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
# that exceed the capabilities of your monitor, you may damage it.
# horizontal frequency range (k stands for 1000)
#monitor-hfreq = 31.5k-50k,70k
# vertical frequency range
#monitor-vfreq = 50-90
# dotclock (or pixelclock) range (m stands for 1000000)
#monitor-dotclock = 30M-300M
# Start in fullscreen mode by default.
#fs=yes
# Change to a different videomode when going fullscreen.
#vm=yes
# Override the autodetected color depth, may need 'vm=yes' as well.
#bpp=0
# Enable software scaling (powerful CPU needed) for video output
# drivers that do not support hardware scaling.
#zoom=yes
# standard monitor size, with square pixels
#monitoraspect=4:3
# Use this for a widescreen monitor, non-square pixels.
#monitoraspect=16:9
# Keep the player window on top of all other windows.
#ontop=yes
# audio settings #
# Specify default audio driver (see -ao help for a list).
#ao=oss
# Use SDL audio driver with the esd subdriver by default.
#ao = sdl:esd
# Specify the mixer device.
#mixer = /dev/mixer
# Resample the sound to 44100Hz with the lavcresample audio filter.
#af=lavcresample=44100
# Output audio to S/PDIF
#ao=alsa:device=spdif
#ac=hwac3,hwdts,hwmpa,
# other settings #
# Pretend to be Window Media Player.
# Fixes playback when playlist and media file use the same URL.
#user-agent=NSPlayer/4.1.0.3856
# Pretend to be Quicktime
# Fixes playback for apple.com/trailers redirects
#user-agent="QuickTime"
# Pretend to be Realplayer SP
# Fixes playback for some video streaming sites
#user-agent=RMA/1.0
# Pretend to have lots of bandwidth
# Speeds up realmedia rtsp:// streams
#bandwidth=2000000
# Pretend to be Winamp
# Fixes playback of some NSV streams
#user-agent="Winamp NSV Player/5.12 (ultravox/2.0)"
# Drop frames to preserve audio/video sync.
#framedrop = yes
# Specify your preferred skin here (skins are searched for in
# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
#skin = Abyss
# Resample the font alphamap.
# 0 plain white fonts
# 0.75 very narrow black outline (default)
# 1 narrow black outline
# 10 bold black outline
#ffactor = 0.75
# cache settings
# Use 8MB input cache by default.
#cache = 8192
# Prefill 20% of the cache before starting playback.
#cache-min = 20.0
# Prefill 50% of the cache before restarting playback after the cache emptied.
#cache-seek-min = 50
# DVD: Display English subtitles if available.
#slang = en
# DVD: Play English audio tracks if available.
#alang = en
# Profiles #
# The options declared as part of profiles override global default settings,
# but only take effect when the profile is active.
[protocol.dvdnav]
#vc=ffmpeg12,
#mouse-movements=yes
#nocache=yes
#[vo.vdpau]
#vc=ffmpeg12vdpau,ffwmv3vdpau,ffvc1vdpau,ffh264vdpau,ffodivxvdpau,
# Most video filters do not work with vdpau.
#vf-clr=yes
# OSD progress bar vertical alignment
#progbar-align=50
# You can also include other configuration files.
#include = /path/to/the/file/you/want/to/include
~/.mplayer/config
# Write your default config options here!
# [default] viene applicata a ogni file
[default]
# usa il server grafico X come video output
vo=xv
# usa alsa per l'audio output
ao=alsa
# ao=oss # Use OSS4
# decodifica multithreaded H264/MPEG-1/2 (valido: 1-8)
lavdopts=threads=2
# impostare il canale audio preferito (in questo esempio il numero sei)
channels = 6
# scala i sottotitoli al 3% della dimensione dello schermo
subfont-text-scale = 3
# non usa fontconfig
nofontconfig = 1
# aggiunge bordi neri ai filmati che non hanno lo stesso aspetto di forma dello schermo
# per wide screen monitors
vf-add=expand=::::1:16/9:16
# per non wide screen traditional monitors
#vf-add=expand=::::1:4/3:16
#profilo di up-mixing da due canali audio a sei canali
# use -profile 2chto6ch to activate
[2chto6ch]
af-add=pan=6:1:0:.4:0:.6:2:0:1:0:.4:.6:2
#profilo di down-mixing da sei canali audio a due canali
# use -profile 6chto2ch to activate
[6chto2ch]
af-add=pan=2:0.7:0:0:0.7:0.5:0:0:0.5:0.6:0.6:0:0
# Disabilita screensaver
heartbeat-cmd="xscreensaver-command -deactivate &" # stop xscreensaver
stop-xscreensaver="yes" # stop gnome-screensaver
ls /etc/modprobe.d/
alsa-base.conf snd-hda-intel.conf
etc/modprobe.d/alsa-base.conf
options snd slots=snd_mia,snd_hda_intel
options snd_mia index=1
options snd_hda_intel index=0
/etc/modprobe.d/snd-hda-intel.conf
options snd-hda-intel model=auto
cat /proc/asound/modules
0 snd_hda_intel
lsmod |grep snd
snd_hda_codec_hdmi 30162 1
snd_hda_codec_conexant 36759 1
snd_hda_intel 37000 2
snd_hda_codec 150305 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77645 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7210 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59109 11 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5450 1 snd

Neburski wrote:
ryanjacobs wrote:So, apparently, your system cannot find the ALSA output driver. I suggest that you use a different driver than ALSA.
OP should first go through the wiki page of ALSA to ensure that his ALSA setup is working correctly. There aren't many sound setups that do not work under ALSA. If OP is relying on another sound setup then he should follow the appropriate wiki and tell us so.
@otto88: It would also help if you would try to explain what your intentions were. I'm assuming you merely want to have sound working and not configure some fancy setup. In that case you should just stick to a basic setup and follow the wiki step by step (don't skip any line and if you don't understand something, you figure that out or you ask people, don't just ignore it).
For instance I don't even have those /etc/modprobe.d/alsa-base.conf and /etc/modprobe.d/snd-hda-intel.conf even though I have 2 sound devices, while you seem to only have 1 sound device
otto88 wrote:cat /proc/asound/modules
0 snd_hda_intel
So your /etc/modprobe.d/alsa-base.conf in that case is totally unnecessary, let alone that you don't even have the snd_mia module loaded so why do you even configure alsa to load it at index 1. You aren't supposed to simply copy and paste the configurations from the wiki. Those configurations are merely there to give you an idea on how to make your own configuration.
When you have ensured that your sound is been set up correctly then you can start with the most basic mplayer configuration. You keep the /etc/mplayer/example.cong configuration file totally commented out (like you have atm) and your ~/.mplayer/config should only contain
ao=alsa
ok i just followed the wiki and your advices and doesn't work, yet
mplayer -ao alsa /dati/Musica/StudyDue.mp3
MPlayer SVN-r36498-snapshot-4.8.2 (C) 2000-2013 MPlayer Team
206 audio & 433 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /dati/Musica/StudyDue.mp3.
libavformat version 55.19.104 (internal)
Audio only file format detected.
Load subtitles in /dati/Musica/
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 22050 Hz, 2 ch, s16le, 32.0 kbit/4.54% (ratio: 4000->88200)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
[AO_ALSA] Playback open error: No such file or directory
Failed to initialize audio driver 'alsa'
Could not open/initialize audio device -> no sound.
Audio: no sound
Video: no video
Exiting... (End of file)

Sound doesn't work(only in firefox). why? sound doesn't work(only in firefox). why? (adobe flash player doesn't work even thought it's installed)

sound doesn't work (only in firefox). adobe flash player doesn't work correctly, thought it's installed. can't solve the problem. i need Sound.
== This happened ==
Every time Firefox opened
== don't know

What does the Adobe test page say?
http://www.adobe.com/software/flash/about/
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See also [[No sound in Firefox]] and [[Video or audio does not play]]

I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

Will u help me or not?

After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks

After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks

There are numerous reports of this issue happening on iPhones. It may be a glitch that will need a new update. Some find that a full shut-down and restart fixes that problem, but not always.

In my wife's window, the sound works, when I switch over to my window the sound doesn't work. I noticed the problem when I went to a YouTube video. How do I correct this?

In my wife's window, the sound works, when I switch over to my window the sound doesn't work. I noticed the problem when I went to a YouTube video. How do I correct this?

Hello Kiira Doon,
The troubleshooting steps detailed below may help get your iPhone's display to function.
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
My issue is still not resolved. What do I do next?Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

My iphone 5c the sound doesn't work only with earphone.

my iphone 5c the sound doesn't work it works only with earphone.

Hi there lavodette,
You may find the troubleshooting steps in the article below helpful.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
-Griff W.

I can't get the product i bought need help NOW doesn't let me connect when i have good internet

i can't get the product i bought need help NOW doesn't let me connect when i have good internet

[personal information should not be posted - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
https://www.adobe.com/account.html to check your subscriptions
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

The sound doesn´t work for games, videos and music,

the sound doesn´t work for games, videos and music, but it works if use my hearphones

Hi mellidani,
If you are having speaker issues with your iPhone, you may find the following article helpful:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Regards,
- Brenden

Upgraded from Windows 8 to Windows 8.1, sound doesn't work, reinstalled driver, still not working

I have an HP Envy dv6, Product number: B6C68AV.
I had Windows 8 Pro 64-bit running on it just fine. Last month I upgraded to Windows 8.1 Pro 64-bit and my sound doesn't work anymore. If I go through the "Find and fix audio playback problems" winzard in Windows most of the time it will fix the problem, but I have to do that every time I reboot or wake the laptop up from sleep. When the fix works, it says it made my sound device the default and that fixed the problem.
So then I think I just need to set my IDT device to be the default, but when I go to manage my sound devices it says there are no audio devices installed, so there's no way to set one of them as my default.
I downloaded the IDT Audio driver at
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59654.exe
Referenced here
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5327...
but after installing and rebooting it still doesn't fix the problem.
Here's what HP Assistant says I have installed in terms of audio drivers
What else can I do?

shodson
many problems one solution
Deactivate Virusscanner Firewall or remove antivirus application, Download Select the correct manufacturer and remove the software
Install New BIOS F29 and UEFI
Please top down install
Driver Update Windows 8.1
Intel Chipset Installation Utility and Driver Windows 8.1
Intel Management Engine Interface (MEI) Driver Windows 8.1
Intel Rapid Storage Technology
Intel HD Graphics
Please top down install
Uninstall Nvidia
Install new Nvidia
Install
IDT High-Definition (HD) Audio Driver
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Help system doesn't work !

Hi there,
I am trying the Circuit Design Suite 13.0 and the help system doesn't work at all.
No help from
The main menu Help -> Multisim help F1
In all the dialogs with a Help button. Nothing happen if I click the Help button ?
I use Windows XP SP3 FRENCH and all the installtion went without any problems everything else is working perfectly.
I checked in the install program if I need to install the help system separately and didn't see anything.
Any ideas of what's goint on ?
Thank you, bye.

Hi Pierre,
Are you able to manually open the help file? Go to C:\Porgram files\National Instruments\Circuit Design Suite 13, the Multisim.chm file is the help file, double click on it and see if it will launch. If you the file opens and nothing is displayed, google 'unable to open .chm" file, there are lots of instructions how to fix it, here is an example:
http://www.thefinalguide.com/2009/07/unable-to-read-chm-files-on-xp-2003-vista/
Tien P.
National Instruments

My iphone 3g sound doesn't work but goes on and off when i'm using headset,

my iphone 3g sound doesn't work but when i plug in headset, the headset sound goes on and off. I think the speaker has a problem or touches but why does the headset not work but goes off randomly?Pls help me out

my iphone 3g sound doesn't work but when i plug in headset, the headset sound goes on and off. I think the speaker has a problem or touches but why does the headset not work but goes off randomly?Pls help me out

The sound doesn't work on my recently purchased hp laptop computer

Hi,
The sound doesn't work on my recently purchased hp computer. It stays on mute. Can I get someone in Lower Hutt NZ to call to fix this problem?
Thanks.
Steve Taylor

Sorry, but this is a peer-to-peer user supported forum. HP maintains no official presence on this forum. HP is unlikely to contact you via this forum. Any response you receive from a HP employee is that of their own and not on behalf of HP.
When requesting assistance, please provide the HP model name and/or product number of the computer in question. Also provide the brand and model of monitor, connection means (HDMI, DVI, VGA, etc.), and if you have external speakers connected to your computer.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

4710s - sound doesn´t work

I´ve instaled on Notebook ProBook 4710s (s/n CNU 9297N5):
MS Windows XP Home Edition, + SP3 HP service packs sp42126, sp42836, sp43901, sp43741, sp41912, sp43742, sp42851 Problem: - Sound doesn´t work (WM Player, RealPlayer, etc…) - volume is set as high
Report from Systems „Service tools / Device administrator“ ? ? ? There are missing these device HDAUDIO\FUNC_01&VEN_11D4&DEV_194A&SUBSYS_103C3076&REV_1004\4&198434D9&0&0001 ACPI\HPQ0004\3&B1BFB68&0 PCI\VEN_11AB&DEV_436C&SUBSYS_3074103C&REV_10\4&384C4504&0&00E5
Can whoever help me? - Thx

For business notebook, unless you have hardware problem, XP drivers are available in your support page.
Have you install MS-UAA before sound, modem, and intel graphics?
For your Hardware Ids
1. HDAUDIO\FUNC_01&VEN_11D4&DEV_194A&SUBSYS_103C3076
This is Audio driver
Install MS-UAA , rebort, install ADI soundmax driver
2. REV_1004\4&198434D9&0&0001 ACPI\HPQ0004
this is HP 3D DriveGuard
3. PCI\VEN_11AB&DEV_436C....
This is your LAN driver, install Marvell Yukon Gigabit Ethernet Controller Driver
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Macbook pro buzzing, sound doesn't work, disk is falsely full...

My 15 inch macbook pro has started buzzing a lot lately at random times. I've had it since 2009, but it's a 2008 model, and I don't know if it's just getting old and telling me that it's going to die soon, or if there's something I can do about it.
It also has other problems, like the sound doesn't work when I start it up (the volume icon is greyed out), and doesn't work again until I've restarted it twice.
Also, when I have programs open, it'll tell me that my disk is full and I only have a few mb of disk space left even if I had many GB available before I opened the programs. I tried fixing this on my own by not having multiple programs open at once, but the disk space won't come back until I restart the computer. It only started doing this a few months ago, and I don't know why.
I used to keep it on all the time and just let it sleep, but I've been shutting it down every day now, and I have the same problems. I don't know what's happening, if it's my fault, or if my computer is just dying, but I need it for animation school and professional photography so if possible I want a heads up if it's about to crash on me.
Thank you.

This worked for me
Reboot the Mac and as soon as you hear the boot chime, hold down the Command+Option+P+R keys together
When you hear the boot sound again, the PRAM has been reset so let the Mac boot again as usual
At this point your Mac should boot again as usual and no longer have the black display, loading OS X as usual.

NEED HELP ( sound doesn't work )

Similar Messages

Maybe you are looking for