Need HELP!!! Speaker Volume Is Unbalanced Even If Setting Says It Is

Please HELP ME!
I just noticed that my speakers are unbalanced.  Right speaker is always louder that of the left (HP G60 Notebook PC).  I have gone back and forth with the settings and it still is unbalanced.  The laptop is well taken cared for and is stored and kept properly not has been dropped bumped or anything whatsoever. I am so upset about this since it feels weird hearing the sounds unbalanced.  I have a Smart Audio Device as it was bought this way and have Altec Lansing Built in Speakers.  I am unable to enjoy the laptop because of this.
Please... can any one comment on this thread.  Any suggestions would be appreciated.

Hello, and thanks for posting to the forum.
Have you tried connecting headphones to the computer and listening that way?  Is it still unbalanced?  If it is, that *might* point more to a configuration problem.  If the sound through the headphones are balanced, it may indicate that there's a hardware issue involved that might need support.
Good luck
- mm
Although I am a Program Manager at HP, I am speaking for myself and not for HP.
Please make it easier for other people to find solutions by selecting “Accept as Solution” if it solves your problem.
*** Click on “Kudos” STAR to say thanks! ***

Similar Messages

  • I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5.  It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

    I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5.  It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

    You will need to get the required info to create/access the account with an email client from your school.
    Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

  • HT4865 I need help findin my sons iPod n I set up with different iCloud account n never installed find my device n location map is off how do I locate device

    I need help findin my sons iPod n I set up with different iCloud account n never installed find my device n location map is off how do I locate device

    Jenniferp27.jp wrote:
    ...n never installed find my device n location map is off how do I locate device
    Then you cannot locate it electronically.
    What to do if your iOS device is lost or stolen
    http://support.apple.com/kb/HT5668

  • I need help.  My cd diagnostic test on itunes says everything is fine.  However, itunes will not show the tracks of what I am trying to load.  So I'm at a complete stand still as to what to do....thanks in advance for any help.

    I need help.  My itunes cd diagnostic test says everything is fine.  However when I put in a cd no tracks appear.  I am at a loss as what to do.  I running the lastest version of itunes and have Vista.  I never have had this problem before....thanks in advance for any help.

    Has any had you try a reset yet? Sometimes the WiFi & Cellular anntennas get wacky.
    Hold Sleep/Wak & Home buttons until the screen goes dark and you see the Apple logo

  • 30p with a Canon XA10 - need help with Final Cut 7 "FIELD DOMINANCE" setting and an explanation of "drop frames". Thank you!!

    I shot footage using a Canon XA10 and there are issues with the HD quality not looking as crisp as it should.  I am trying to make sure the settings in Final Cut are right.  Need help confirming what should be in "Field Dominance" --- have seen discussions about making sure it's set to "none" but I'm confused as to what to do. 
    Also someone suggested I use "drop frames" to change from 30p to 24p within Final Cut.  He couldn't explain how to do it so any input appreciated as well as any thoughts on whether this is a good option to try.

    If you're shooting 30p, field dominance should be set to none.   Since you need to use log and transfer to bring this material in to fcp, I would assume it would be set correctly automatically.  Are you sure you've set the camera properly?
    Drop frames will not change 30 p to 24p.   Dropframe timecode simply refers to the number assigned to each frame which drops an occasional number (not any frames) so the timecode duration is the actual duration, since 30p videoi is actually 29.97 frames per second which each frame assigned a timecode number. 
    This is very basic video stuff and requires some basic knowledge of video.  Wikipedia is a pretty good resource for much of this stuff plus there are lots of great resources on the web.  Look up interlaced and progressive video, 24p and 30p. 
    And as far as judging quality, you can only get an accurate view of the quality in fcp when you have a video card attached to a video monitor.  The viewer and canvas are only an approximation of what the quality is.  Minimally, set the canvas or viewer to 100% to get a better approximation of the quality. 

  • Need help on volume issue when adding a song from itunes

    I am creating a podcast.  I am hoping to create a guided meditation CD with speaking and background music.  I used the male voice to record the speaking vocals and adjusted some small areas slightly for volume if I was too close to the microphone, etc.  It is a twelve minute recording.  I then added a music selection (for background) from my itunes by clicking on media browser, audio, and dragging the song into the track area.  It automatically put it in Jingles.  When I listened to the new recording, speaking vocals and music together, the background music had distinct variations in its sound, going louder and softer on its own, sporadically, jumping in random places.  It doesn't do that if I listen to the music selection directly from itunes.  So the volume increasing and decreasing only happens when it is brought into garageband.  When I hit play on the final piece, the vocals sound exactly as they should but the music jumps around in volume randomly.
    I have tried putting the music selection in as a new basic track instead of Jingles.
    I have also tried starting with a new podcast, putting the music in first and then adding the completed vocals (I tried it in both male voice and female voice). 
    I have tried putting the music selection into a project by itself with no vocals and it sounds just fine... the volume problem happens when I add the speaking vocals to the project. 
    I have also tried dragging the music selection from a file on my computer instead of from itunes.  None of these things have helped.
    Somehow the vocals and the music together in garageband make the music sound wonky.  Please help.  Any advice would be helpful.
    Thank you
    Beau

    isabeauesby wrote:
    the background music had distinct variations in its sound, going louder and softer on its own,
    make sure the Ducking menuItem is turned off

  • (Need help) Auto volume on Xperia z series

    I have a zl and I recently upgraded to the Z3 but they both have the exact same annoying problem. First off the volume is kind of low to begin with. If I am playing a song that's mastered in a reely high volume it's still quiet. It has 3/4 or 2/3 of the volume of other phones like my Galaxy. The 2nd problem is that I can have it up all the way and the treble of a song rapes my ears off then the bass kicks in and I can't hear the song or the bass.it's like some wierd automatic audio control and once it happens it barely goes up again and if I set it at 3/4ths up the volume thing and turn it up more nothing happens. It's like some sort of ear protection feature but it's way too sensitive. It does it on anything I try it on including amps and even Bluetooth speakers so it's not a chord or headphones. I think it's some safety feature but it's annoying AF and I don't want it.

    You need to perform a system repair which will factory reset your phone
    Switch off your tablet and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your tablet still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • NEED HELP Xsan volume is not mounted (strange problem)

    I ask the help in solving the volume mount problem. (advance I am sorry for my english)
    All began with the fact that the MDC is rebooted and on the two LUNs were gone XSAN label. I relabeled these LUNs using commands:
    cvlabel -c >label_list
    then in the file  label_list I corrected unknown disks on the label with a same names that were. Then I ran the cvlabel label_list command. Finally I got the correct label on all drives.
    # cvlabel -l
    /dev/rdisk14 [Raidix  meta_i          3365] acfs-EFI "META_I"Sectors: 3906830002. Sector Size: 512.  Maximum sectors: 3906975711.
    /dev/rdisk15 [Raidix  QSAN_I          3365] acfs-EFI "QSAN_I"Sectors: 7662714619. Sector Size: 4096.  Maximum sectors: 7662714619.
    /dev/rdisk16 [Raidix  meta_ii         3365] acfs-EFI "META_II"Sectors: 3906830002. Sector Size: 512.  Maximum sectors: 3906975711.
    /dev/rdisk17 [Raidix  2k_I            3365] acfs-EFI "2K_I"Sectors: 31255934943. Sector Size: 512.  Maximum sectors: 31255934943.
    /dev/rdisk18 [Raidix  2k_II           3365] acfs-EFI "2K_II"Sectors: 31255934943. Sector Size: 512.  Maximum sectors: 31255934943.
    /dev/rdisk19 [Raidix  QSAN_II         3365] acfs-EFI "QSAN_II"Sectors: 7662714619. Sector Size: 4096.  Maximum sectors: 7662714619.
    The volume [2K] starts successfully.
    but not mounted on the MDC and client.
    I ran a volume check:
    sh-3.2# cvfsck -wv 2K
    Checked Build disabled - default.
    BUILD INFO:
    #!@$ Revision 4.2.2 Build 7443 (480.8) Branch Head
    #!@$ Built for Darwin 12.0
    #!@$ Created on Mon Jul 29 17:01:44 PDT 2013
    Created directory /tmp/cvfsck3929a for temporary files.
    Attempting to acquire arbitration block... successful.
    Creating MetadataAndJournal allocation check file.
    Creating Video allocation check file.
    Creating Data allocation check file.
    Recovering Journal Log.
    Super Block information.
      FS Created On               : Wed Oct  2 23:59:20 2013
      Inode Version               : '2.7' - 4.0 big inodes + NamedStreams (0x207)
      File System Status          : Clean
      Allocated Inodes            : 4022272
      Free Inodes                 : 16815
      FL Blocks                   : 79
      Next Inode Chunk            : 0x51a67
      Metadump Seqno              : 0
      Restore Journal Seqno       : 0
      Windows Security Indx Inode : 0x5
      Windows Security Data Inode : 0x6
      Quota Database Inode        : 0x7
      ID Database Inode           : 0xa
      Client Write Opens Inode    : 0x8
    Stripe Group MetadataAndJournal             (  0) 0x746ebf0 blocks.
    Stripe Group Video                          (  1) 0x746ffb60 blocks.
    Stripe Group Data                           (  2) 0xe45dfb60 blocks.
    Inode block size is 1024
    Building Inode Index Database 4022272 (100%).       
       4022272 inodes found out of 4022272 expected.
    Verifying NT Security Descriptors
    Found 13 NT Security Descriptors: all are good
    Verifying Free List Extents.
    Scanning inodes 4022272 (100%).         
    Sorting extent list for MetadataAndJournal pass 1/1
    Updating bitmap for MetadataAndJournal extents 21815 (  0%).                   
    Sorting extent list for Video pass 1/1
    Updating bitmap for Video extents 3724510 ( 91%).                   
    Sorting extent list for Data pass 1/1
    Updating bitmap for Data extents 4057329 (100%).                   
    Checking for dead inodes 4022272 (100%).         
    Checking directories 11136 (100%).        
    Scanning for orphaned inodes 4022272 (100%).       
    Verifying link & subdir counts 4022272 (100%).         
    Checking free list. 4022272 (100%).       
    Checking pending free list.                       
    Checking Arbitration Control Block.
    Checking MetadataAndJournal allocation bit maps (100%).        
    Checking Video allocation bit maps (100%).        
    Checking Data allocation bit maps (100%).        
    File system '2K'. Blocks-5784860352 free-3674376793 Inodes-4022272 free-16815.
    File System Check completed successfully.
    check not helping 
    sh-3.2# cvadmin
    Xsan Administrator
    Enter command(s)
    For command help, enter "help" or "?".
    List FSS
    File System Services (* indicates service is in control of FS):
    1>*2K[0]                located on big.local:64844 (pid 5217)
    Select FSM "2K"
    Created           :          Wed Oct  2 23:59:20 2013
    Active Connections:          0
    Fs Block Size     :          16K
    Msg Buffer Size   :          4K
    Disk Devices      :          5
    Stripe Groups     :          3
    Fs Blocks         :          5784860352 (86.20 TB)
    Fs Blocks Free    :          3665561306 (54.62 TB) (63%)
    Xsanadmin (2K) > show
    Show stripe groups (File System "2K")
    Stripe Group 0 [MetadataAndJournal]  Status:Up,MetaData,Journal,Exclusive
      Total Blocks:122088432 (1.82 TB)  Reserved:0 (0.00 B) Free:121753961 (1.81 TB) (99%)
      MultiPath Method:Rotate
        Primary  Stripe [MetadataAndJournal]  Read:Enabled  Write:Enabled
    Stripe Group 1 [Video]  Status:Up
      Total Blocks:1953495904 (29.11 TB)  Reserved:270720 (4.13 GB) Free:129179 (1.97 GB) (0%)
      MultiPath Method:Rotate
        Primary  Stripe [Video]  Read:Enabled  Write:Enabled
    Stripe Group 2 [Data]  Status:Up
      Total Blocks:3831364448 (57.09 TB)  Reserved:270720 (4.13 GB) Free:3665432127 (54.62 TB) (95%)
      MultiPath Method:Rotate
        Primary  Stripe [Data]  Read:Enabled  Write:Enabled
    I checked the availability of LUNs on MDC and client, there also all right.
    But, unfortunately, the Volume is not mounted 
    xsanctl mount 2K
    mount command failed: Unable to mount volume `2K' (error code: 5)
    Please help me to figure out this situation, I will be grateful for any information.
    Thanks

    That looks like an I/O error. You may have an issue with one or more of the data LUNs. Check the system log for errors.

  • Need help with volume I can't get rid of and terminal

    I own a external HD named "elements". One day a second volume appeared named "elements". Every time I tried to save files to my external HD they were written on this mysterious volume. The volume isn't showed on my desktop - only when I try to save something with Opera (browser) or in the terminal I can see it.
    I renamed my external HD so I can write files to it. So far so good.
    But how can I get rid of this volume? The finder does not show it. Spotlight does noch find it. Only in the terminal I can see this volume and I can see the files in it.
    the terminal command "diskutil eject /volumes/elements" or "diskutil unmount force /volumes/elements" did not help.
    what can I do?

    It sounds like a "false clone" was created on your internal HD, which can happen if the target volume of a backup program becomes unavailable during the copy process.
    Try this:
    First eject and disconnect all external drives, then:
    Finder>Go menu> Go to Folder
    enter /Volumes and click Go
    Don't touch the alias to your internal HD volume, or any other alias.
    If you see "elements," and it is NOT an alias, trash it and empty the trash.
    jd

  • Newbie task. Need help inserting CD track marks evenly across a file!

    Hello;
    Im trying to insert CD track marks evenly across recorded conference sessions. Each session will be burned to a CD, and they run about 1 hour each.
    I need to do this to supply the listener with track marks so they can skip parts of a session/start back where they left off.  I would like to set the track marks about every 2-3 minutes or so.
    Can anyone spell out the process for me? I would really appreciate it!
    Thank you
    Gary

    I'm not sure what kind of response you will get in this forum. Maybe you could also post this question in one of the Solaris forums located here http://forum.sun.com/. Perhaps the kernel forum.

  • Need help with volume in music player

    Well my blackberry curve 8520 is an exellent phone but i am facing a problem with a feature and i appreciate someones help.
    well the side +volume button is not working and i have no volume at all using the headset andthe speakerphone and im a evryday music listner.
    I want a way wich with i can higher the volume without fixing the button or doing anything plz help, you are an awsm community and thank you

    Plug it into iTunes and restore it.
    Patrick

  • Need help with Volume Slider

    Hi All,
    I created a graphic to simulate a volume slider. Its working, but i want a movieclip graphic (vol_switch) to follow the mask. It is only following it after i release the mouse. i cannot figure out how to have it follow on the mouse drag without taking precedence over the mask and disabling that. any suggestions?
    I tried the code in bold, but not working.
    stop();
    maskee.cacheAsBitmap = true;
    vol_slider.cacheAsBitmap = true;
    maskee.mask = vol_slider;
    function startDragHandler(evt:MouseEvent):void
    vol_slider.startDrag(false, new Rectangle(2, 0, 298, 0));
    stage.addEventListener(MouseEvent.MOUSE_UP, stopDragHandler);
    vol_switch.x = vol_slider.x
    function stopDragHandler(evt:MouseEvent):void
    vol_slider.stopDrag();
    vol_switch.x = vol_slider.x
    stage.removeEventListener(MouseEvent.MOUSE_UP, stopDragHandler);
    vol_slider.buttonMode = true;
    vol_slider.addEventListener(MouseEvent.MOUSE_DOWN, startDragHandler);
    thank you in advance!!
    - Pat

    Thanks NED!
    that was it... I got the code below working.
    stop();
    maskee.cacheAsBitmap = true;
    vol_slider.cacheAsBitmap = true;
    maskee.mask = vol_slider;
    stage.addEventListener(Event.ENTER_FRAME,myFunction);
    function myFunction(event:Event) {
    vol_switch.x = vol_slider.x;
    function startDragHandler(evt:MouseEvent):void {
    vol_slider.startDrag(false, new Rectangle(2, 0, 298, 0));
    stage.addEventListener(MouseEvent.MOUSE_UP, stopDragHandler);
    function stopDragHandler(evt:MouseEvent):void {
    vol_slider.stopDrag();
    stage.removeEventListener(MouseEvent.MOUSE_UP, stopDragHandler);
    vol_switch.buttonMode = true;
    vol_switch.addEventListener(MouseEvent.MOUSE_DOWN, startDragHandler);

  • TS1292 Yes I need help activating my card again even though its activated

    my iTunes card needs to be activated

    If it's activated then it shouldn't need activating again - you should be able to redeem it onto your account.
    If it hasn't been activated then are you able to take the card back to the store that you bought it from so that they can activate it properly ? If not then you can try contacting iTunes Support (you will probably need to give them images of the front and back of the card and your receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • Need help: Flex  record webcam problem, how to setting Brightness,Contrast,Saturation and Sharpness

    Hello, dear all
    Please help me!
    Flex  record webcam problem, how to setting Brightness,Contrast,Saturation and Sharpness?
    nsOutGoing=new NetStream(nc);
    nsOutGoing.attachCamera(m_camera);
    nsOutGoing.publish(filename, "record");
    I want to control the Brightness,Contrast,Saturation and Sharpness for the recorded flv file.
    At present, I only can control the videodisplay object, but I can not able to control Camera.
    Thanks very much!!
    kimi
    MSN: [email protected]

    Can I change a Video object to to Camera object, If yes, How do??
    nsOutGoing.attachCamera(video as Camera);// it does not work rightly
    thanks

  • I need help trouble shooting my 2 apple TV set up in home.

    I have 2 Apple TVs in my home.  One Gen1 and 1 Gen2.  The gen1 is working fine with home sharing and finding the movies, etc.  But the gen 2 is not showing up in iTunes under devices and I can't get it to pull down the content (movies, songs, etc).  What should I do?

    ATV1 doesn't use Home Sharing but ATV2 does.
    ATV1 was set up using an onscreen code you entered in iTunes for that device.
    On ATV2 as you set up Home Sharing credentials on the unit it then finds Home Shared itunes libraries without the numeric code step.  Consequently ATV2's never show in Devices (unless restoring them over USB).
    ATV1 had a hard drive to store contemt. ATV2 has solid state memory and only a small amount so cannot store any content permanently like ATV1. ATV2 only streams.  Do you see the iTunes library under the Computers column?

Maybe you are looking for