Need help. Speech Analysis tool
Hello. The problem comes when I try to use the " Speech Analysis" tool in Adobe Premier CC .
In the process of export , the Media Encoder uses the .AIFF format and not in the format .CIT
And in Adobe Premier shows no text Metadata section .
I need help , Thanks
Hi Ani,
Once you specify the Format (along side the Map date), if the Mapping is proper, the light will be green. Are you getting a GREEN light?
If everything is proper you will get green light on ALL 4 steps which you have selected. Even if BP is not created & no batch job created, you should get GREEN on Upload File & Map data.
Once the Mapping is correct, BP still might not get created since you might not have entered some mandatory fields or the mapping is not proper to the BP transaction (this can be viwed by clicking the RED button)
In your case, you are not getting any of these. That seems either you Mapping Format is wrong or there is somehting wrong in System (in which case, better go for an OSS). If you are not even getting a RED button, I cant help
Hope this is of some help.
-Liju
(Mark the post if it helped)
Similar Messages
-
CS5 Speech Analysis Tool For Transcription, Acceptable Media Types?
Hi all,
I've been fiddling with the oh so handy, speech analysis toolin CS5 PPro, and can really see the potential for cutting down on transciption time. I spent a bit of time poking around the CS5 PPro help document, as well as tutorials via lynda.com etc. to gain a bit more insight into the file types that the speech analysis will accept and am drawing a blank other than the observations I have made doing a bit of experimenting with the feature. So far, I can not get the tool to recognize 2 of our 3 cameras, native media. Currently it will analyze only raw media shot via SDHC Class 6 cards on a JVC HGMY700 in 1080i60 format. The other two camera/media types in question are Panasonic P2 MXF files and Ikegami HDS-V10 MXF files, both are also 1080i60 format.
Is there perhaps a codec/plug-in etc. available to access the speech analysis tool with these other types of media? I have found it works well with quicktime .mov files, but I might end up spending as much time waiting to convert the file to an .mov as I would just transcribing the old fashioned way.
Any insight on how I might best utilize this tool would be greatly appreciated. Thank you!
On a separate random note, if anyone has any useful info, links or otherwise, in regards to media management using CatDV and Cache-A for archive, it would also be appreciated. That's one of many projects looming...
LindsayBelieve it or not, it has nothing to do with the media type--well, specifically, it doesn't have anything to do with the format or codec.
So, what's the problem? Annoyingly, Panasonic P2 structures are write-protected--that is, they're marked as "Read-only." While this isn't much of a problem in normal operation, when you try to do things like speech transcription (and other metadata entry, if I recall correctly), you'll effectively be shut out. The files in the structure are writeable, but the structure itself is not.
Yep. Weird.
What to do? In Explorer, simply right-click the CONTENTS folder (you might even be able to do this at the top level, if you save your P2 offloads in that way), click Properties, and clear the Read-only checkbox in Attributes. Once the Read-only attribute is cleared, you should be able to run Speech Analysis on the P2 clips. You'll probably want to change the Read-only flag with Premiere Pro closed.
Now--that might not solve it. There seems to be a latent bug in Pr that prevents you from running Speech Analysis on a single P2 MXF clip. If this seems to be the case, try selecting two or more clips in the Project Panel, and then check to see if the Analyze button or Analyze Content menu command is available. Pretty silly, but at least its a reasonably painless workaround.
Hope that gets things working for you. -
Need help with Patch Tool in CS5
I am having a problem using the patch tool in Photoshop CS5. I click on the Patch Tool and select the Source option from the upper tool bar. Then I circle a gray area in the background of my photo and, holding down the left mouse button, I drag the selection to a black area in the background and release the mouse button. Instead of turning the selected area black it just makes the area slightly darker than it was originally. I just don’t understand why I can’t use the patch tool and any help would be appreciated.
Thank you very much for these suggestions. Robert
Noel Carboni <[email protected]> wrote:
Noel Carboni http://forums.adobe.com/people/Noel+Carboni created the discussion
"Re: Need help with Patch Tool in CS5"
To view the discussion, visit: http://forums.adobe.com/message/4308270#4308270 -
Hi Guys,
I need help with importing a external list in .csv format into CRM 4.0. I want these to be created as business partners within the system. I have created a mapping format called ztest for my import file. However I am unable to do the upload part.
After creating the mapping, I went to Maintain address list. I have selected orgin & type as own data. In the process tab I have selected upload file, map data, business partner creation, target group creation. For start I select immidiately and save the file. I get a green light saying that address list was saved. But nothing happens. I went to transaction BP to check if the BP was created but they are not there. Am I missing any steps?Hi Ani,
Once you specify the Format (along side the Map date), if the Mapping is proper, the light will be green. Are you getting a GREEN light?
If everything is proper you will get green light on ALL 4 steps which you have selected. Even if BP is not created & no batch job created, you should get GREEN on Upload File & Map data.
Once the Mapping is correct, BP still might not get created since you might not have entered some mandatory fields or the mapping is not proper to the BP transaction (this can be viwed by clicking the RED button)
In your case, you are not getting any of these. That seems either you Mapping Format is wrong or there is somehting wrong in System (in which case, better go for an OSS). If you are not even getting a RED button, I cant help
Hope this is of some help.
-Liju
(Mark the post if it helped) -
Hi: I'm analyzing this STATSPACK report: it is "volume test" on our UAT server, so most input is from 'bind variables'. Our shared pool is well utilized in oracle. Oracle redo logs is not appropriately configured on this server, as in 'Top 5 wait events' there are 2 for redos.
I need to know what else information can be dig-out from 'foreground wait events' & 'background wait events', and what can assist us to better understanding, in combination of 'Top 5 wait event's, that how the server/test went? it could be overwelming No. of wait events, so appreciate any helpful diagnostic or analysis. Database is oracle 11.2.0.4 upgraded from 11.2.0.3, on IBM AIX power system 64bit, level 6.x
STATSPACK report for
Database DB Id Instance Inst Num Startup Time Release RAC
~~~~~~~~ ----------- ------------ -------- --------------- ----------- ---
700000XXX XXX 1 22-Apr-15 12:12 11.2.0.4.0 NO
Host Name Platform CPUs Cores Sockets Memory (G)
~~~~ ---------------- ---------------------- ----- ----- ------- ------------
dXXXX_XXX AIX-Based Systems (64- 2 1 0 16.0
Snapshot Snap Id Snap Time Sessions Curs/Sess Comment
~~~~~~~~ ---------- ------------------ -------- --------- ------------------
Begin Snap: 5635 22-Apr-15 13:00:02 114 4.6
End Snap: 5636 22-Apr-15 14:00:01 128 8.8
Elapsed: 59.98 (mins) Av Act Sess: 0.6
DB time: 35.98 (mins) DB CPU: 19.43 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 2,064M Std Block Size: 8K
Shared Pool: 3,072M Log Buffer: 13,632K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ ------------------ ----------------- ----------- -----------
DB time(s): 0.6 0.0 0.00 0.00
DB CPU(s): 0.3 0.0 0.00 0.00
Redo size: 458,720.6 8,755.7
Logical reads: 12,874.2 245.7
Block changes: 1,356.4 25.9
Physical reads: 6.6 0.1
Physical writes: 61.8 1.2
User calls: 2,033.7 38.8
Parses: 286.5 5.5
Hard parses: 0.5 0.0
W/A MB processed: 1.7 0.0
Logons: 1.2 0.0
Executes: 801.1 15.3
Rollbacks: 6.1 0.1
Transactions: 52.4
Instance Efficiency Indicators
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 99.98 Optimal W/A Exec %: 100.00
Library Hit %: 99.77 Soft Parse %: 99.82
Execute to Parse %: 64.24 Latch Hit %: 99.98
Parse CPU to Parse Elapsd %: 53.15 % Non-Parse CPU: 98.03
Shared Pool Statistics Begin End
Memory Usage %: 10.50 12.79
% SQL with executions>1: 69.98 78.37
% Memory for SQL w/exec>1: 70.22 81.96
Top 5 Timed Events Avg %Total
~~~~~~~~~~~~~~~~~~ wait Call
Event Waits Time (s) (ms) Time
CPU time 847 50.2
enq: TX - row lock contention 4,480 434 97 25.8
log file sync 284,169 185 1 11.0
log file parallel write 299,537 164 1 9.7
log file sequential read 698 16 24 1.0
Host CPU (CPUs: 2 Cores: 1 Sockets: 0)
~~~~~~~~ Load Average
Begin End User System Idle WIO WCPU
1.16 1.84 19.28 14.51 66.21 1.20 82.01
Instance CPU
~~~~~~~~~~~~ % Time (seconds)
Host: Total time (s): 7,193.8
Host: Busy CPU time (s): 2,430.7
% of time Host is Busy: 33.8
Instance: Total CPU time (s): 1,203.1
% of Busy CPU used for Instance: 49.5
Instance: Total Database time (s): 2,426.4
%DB time waiting for CPU (Resource Mgr): 0.0
Memory Statistics Begin End
~~~~~~~~~~~~~~~~~ ------------ ------------
Host Mem (MB): 16,384.0 16,384.0
SGA use (MB): 7,136.0 7,136.0
PGA use (MB): 282.5 361.4
% Host Mem used for SGA+PGA: 45.3 45.8
Foreground Wait Events DB/Inst: XXXXXs Snaps: 5635-5636
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by Total Wait Time desc, Waits desc (idle events last)
Avg %Total
%Tim Total Wait wait Waits Call
Event Waits out Time (s) (ms) /txn Time
enq: TX - row lock contentio 4,480 0 434 97 0.0 25.8
log file sync 284,167 0 185 1 1.5 11.0
Disk file operations I/O 8,741 0 4 0 0.0 .2
direct path write 13,247 0 3 0 0.1 .2
db file sequential read 6,058 0 1 0 0.0 .1
buffer busy waits 1,800 0 1 1 0.0 .1
SQL*Net more data to client 29,161 0 1 0 0.2 .1
direct path read 7,696 0 1 0 0.0 .0
db file scattered read 316 0 1 2 0.0 .0
latch: shared pool 144 0 0 2 0.0 .0
CSS initialization 30 0 0 3 0.0 .0
cursor: pin S 10 0 0 9 0.0 .0
row cache lock 41 0 0 2 0.0 .0
latch: row cache objects 19 0 0 3 0.0 .0
log file switch (private str 8 0 0 7 0.0 .0
library cache: mutex X 28 0 0 2 0.0 .0
latch: cache buffers chains 54 0 0 1 0.0 .0
latch free 290 0 0 0 0.0 .0
control file sequential read 1,568 0 0 0 0.0 .0
log file switch (checkpoint 4 0 0 6 0.0 .0
direct path sync 8 0 0 3 0.0 .0
latch: redo allocation 60 0 0 0 0.0 .0
SQL*Net break/reset to clien 34 0 0 1 0.0 .0
latch: enqueue hash chains 45 0 0 0 0.0 .0
latch: cache buffers lru cha 7 0 0 2 0.0 .0
latch: session allocation 5 0 0 1 0.0 .0
latch: object queue header o 6 0 0 1 0.0 .0
ASM file metadata operation 30 0 0 0 0.0 .0
latch: In memory undo latch 15 0 0 0 0.0 .0
latch: undo global data 8 0 0 0 0.0 .0
SQL*Net message from client 6,362,536 0 278,225 44 33.7
jobq slave wait 7,270 100 3,635 500 0.0
SQL*Net more data from clien 7,976 0 15 2 0.0
SQL*Net message to client 6,362,544 0 8 0 33.7
Background Wait Events DB/Inst: XXXXXs Snaps: 5635-5636
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by Total Wait Time desc, Waits desc (idle events last)
Avg %Total
%Tim Total Wait wait Waits Call
Event Waits out Time (s) (ms) /txn Time
log file parallel write 299,537 0 164 1 1.6 9.7
log file sequential read 698 0 16 24 0.0 1.0
db file parallel write 9,556 0 13 1 0.1 .8
os thread startup 146 0 10 70 0.0 .6
control file parallel write 2,037 0 2 1 0.0 .1
Log archive I/O 35 0 1 30 0.0 .1
LGWR wait for redo copy 2,447 0 0 0 0.0 .0
db file async I/O submit 9,556 0 0 0 0.1 .0
db file sequential read 145 0 0 2 0.0 .0
Disk file operations I/O 349 0 0 0 0.0 .0
db file scattered read 30 0 0 4 0.0 .0
control file sequential read 5,837 0 0 0 0.0 .0
ADR block file read 19 0 0 4 0.0 .0
ADR block file write 5 0 0 15 0.0 .0
direct path write 14 0 0 2 0.0 .0
direct path read 3 0 0 7 0.0 .0
latch: shared pool 3 0 0 6 0.0 .0
log file single write 56 0 0 0 0.0 .0
latch: redo allocation 53 0 0 0 0.0 .0
latch: active service list 1 0 0 3 0.0 .0
latch free 11 0 0 0 0.0 .0
rdbms ipc message 314,523 5 57,189 182 1.7
Space Manager: slave idle wa 4,086 88 18,996 4649 0.0
DIAG idle wait 7,185 100 7,186 1000 0.0
Streams AQ: waiting for time 2 50 4,909 ###### 0.0
Streams AQ: qmn slave idle w 129 0 3,612 28002 0.0
Streams AQ: qmn coordinator 258 50 3,612 14001 0.0
smon timer 43 2 3,605 83839 0.0
pmon timer 1,199 99 3,596 2999 0.0
SQL*Net message from client 17,019 0 31 2 0.1
SQL*Net message to client 12,762 0 0 0 0.1
class slave wait 28 0 0 0 0.0
thank you very much!Hi: just know it now: it is a large amount of 'concurrent transaction' designed in this "Volume Test" - to simulate large incoming transaction volme, so I guess wait in eq:TX - row is expected.
The fact: (1) redo logs at uat server is known to not well-tune for configurations (2) volume test slow 5%, however data amount in its test is kept the same by each time import production data, by the team. So why it slowed 5% this year?
The wait histogram is pasted below, any one interest to take a look? any ideas?
Wait Event Histogram DB/Inst: XXXX/XXXX Snaps: 5635-5636
-> Total Waits - units: K is 1000, M is 1000000, G is 1000000000
-> % of Waits - column heading: <=1s is truly <1024ms, >1s is truly >=1024ms
-> % of Waits - value: .0 indicates value was <.05%, null is truly 0
-> Ordered by Event (idle events last)
Total ----------------- % of Waits ------------------
Event Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
ADR block file read 19 26.3 5.3 10.5 57.9
ADR block file write 5 40.0 60.0
ADR file lock 6 100.0
ARCH wait for archivelog l 14 100.0
ASM file metadata operatio 30 100.0
CSS initialization 30 100.0
Disk file operations I/O 9090 97.2 1.4 .6 .4 .2 .1 .1
LGWR wait for redo copy 2447 98.5 .5 .4 .2 .2 .2 .1
Log archive I/O 35 40.0 8.6 25.7 2.9 22.9
SQL*Net break/reset to cli 34 85.3 8.8 5.9
SQL*Net more data to clien 29K 99.9 .0 .0 .0 .0 .0
buffer busy waits 1800 96.8 .7 .7 .6 .3 .4 .5
control file parallel writ 2037 90.7 5.0 2.1 .8 1.0 .3 .1
control file sequential re 7405 100.0 .0
cursor: pin S 10 10.0 90.0
db file async I/O submit 9556 99.9 .0 .0 .0
db file parallel read 1 100.0
db file parallel write 9556 62.0 32.4 1.7 .8 1.5 1.3 .1
db file scattered read 345 72.8 3.8 2.3 11.6 9.0 .6
db file sequential read 6199 97.2 .2 .3 1.6 .7 .0 .0
direct path read 7699 99.1 .4 .2 .1 .1 .0
direct path sync 8 25.0 37.5 12.5 25.0
direct path write 13K 97.8 .9 .5 .4 .3 .1 .0
enq: TX - row lock content 4480 .4 .7 1.3 3.0 6.8 12.3 75.4 .1
latch free 301 98.3 .3 .7 .7
latch: In memory undo latc 15 93.3 6.7
latch: active service list 1 100.0
latch: cache buffers chain 55 94.5 3.6 1.8
latch: cache buffers lru c 9 88.9 11.1
latch: call allocation 6 100.0
latch: checkpoint queue la 3 100.0
latch: enqueue hash chains 45 97.8 2.2
latch: messages 4 100.0
latch: object queue header 7 85.7 14.3
latch: redo allocation 113 97.3 1.8 .9
latch: row cache objects 19 89.5 5.3 5.3
latch: session allocation 5 80.0 20.0
latch: shared pool 147 90.5 1.4 2.7 1.4 .7 1.4 2.0
latch: undo global data 8 100.0
library cache: mutex X 28 89.3 3.6 3.6 3.6
log file parallel write 299K 95.6 2.6 1.0 .4 .3 .2 .0
log file sequential read 698 29.5 .1 4.6 46.8 18.9
log file single write 56 100.0
log file switch (checkpoin 4 25.0 50.0 25.0
log file switch (private s 8 12.5 37.5 50.0
log file sync 284K 93.3 3.7 1.4 .7 .5 .3 .1
os thread startup 146 100.0
row cache lock 41 85.4 9.8 2.4 2.4
DIAG idle wait 7184 100.0
SQL*Net message from clien 6379K 86.6 5.1 2.9 1.3 .7 .3 2.8 .3
SQL*Net message to client 6375K 100.0 .0 .0 .0 .0 .0 .0
Wait Event Histogram DB/Inst: XXXX/xxxx Snaps: 5635-5636
-> Total Waits - units: K is 1000, M is 1000000, G is 1000000000
-> % of Waits - column heading: <=1s is truly <1024ms, >1s is truly >=1024ms
-> % of Waits - value: .0 indicates value was <.05%, null is truly 0
-> Ordered by Event (idle events last)
Total ----------------- % of Waits ------------------
Event Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
SQL*Net more data from cli 7976 99.7 .1 .1 .0 .1
Space Manager: slave idle 4086 .1 .2 .0 .0 .3 3.2 96.1
Streams AQ: qmn coordinato 258 49.2 .8 50.0
Streams AQ: qmn slave idle 129 100.0
Streams AQ: waiting for ti 2 50.0 50.0
class slave wait 28 92.9 3.6 3.6
jobq slave wait 7270 .0 100.0
pmon timer 1199 100.0
rdbms ipc message 314K 10.3 7.3 39.7 15.4 10.6 5.3 8.2 3.3
smon timer 43 100.0 -
Need Help: Web Analysis, Unable to retrieve the data & Security Tab missing
Hi
I'm new to Hyperion (our version: 9.2.1) and we're implementing Hyperion Planning. One of the reporting tools is Web Analysis.
I'm trying to create simple grid reporting. but I'm unable to retrieve the data instead the result is "n/a"
and
The File's Properties > Security tab is missing
Does anyone know my issue?
Thanks,Hi Experts,
You told its resolved.how?
I am having the same issue i am unable to retrive the tables.
"Database:MS SQL Server
Driver :weblogic.jdbcx.sqlserver.SQLServerDataSource.
Connection String:jdbc:weblogic:sqlserver://localhost:1433;databaseName=BAM"
Please help if you have resolved this issue.Any helpful links plz forward [email protected]
Thanks -
Need help getting 'move tool' to work in CS5
I cannot move an item just pasted into an image and on its own layer, by using the move tool. The move tool has become a hand and moves everything including the unselected layer below as well as the item on the layer above that I wanted to move independently of the layer below. Selecting 'transform' does not allow independent moving either, nor does it allow me to transform or change the size of the newly pasted object.
I'm told that 'I'm useing the wrong shortcut.' I'm not sure what that means.
I'm new to CS5 coming from CS3 where the tool at the top of the tools is the move tool and using the spacebar turns it into the hand tool. Right now, the move tool remains the hand tool without using the spacebar. It seems to be locked.
Can anyone help me straighten this out?
TIA,
Kenc.pfaffenbichler wrote:
How To Get Help Quickly!
Boilerplate-text:
Are Photoshop and OS fully updated?
As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by pressing command-alt-shift on starting the program or starting from a new user-account.
System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem.
I've done all of the above except that instead of Onyx I use Cocktail. If I need to switch from Cocktail to Onyx please advise.
The behavior with the hand tool still persists. I am forced to go back to Photoshop CS3 at this point but will check back here for possible other answers, or maybe a future update or upgrade will fix the problem. It's hightly unusual for me to have any problems with Photoshop as I've been using it since the mid-1980's up to now with no problems.
Patience will win out.
Thanks to all,
Ken -
Hi friends need help reg supporting tools
hi friends,
i need ur knowledge regarding supporting tools like
REMEDY,CITRIX.need some material regarding these tools.
pl forward to this mail id:[email protected]
thanks in advance
regards,
srikanth.Hello Srikanth,
REMEDY : It is issue management tool used by the service provider to manage their tickets/issues. The documentation you can find from your project team, but mainly the process will be as follow for managing issues:
There are several stages from raising the ticket to close it.
1. Creation of Ticket : Inititally user will identify the query and raise the ticket in Issue management tool.
2. Acceptance of Ticket: Support team will response the user query saying that We acknowledge the query.
3. Assign to Consultant: Once Ticket is accpeted by support team, they will assign to respective team
4. Work in process: Consultant will put the status as Work in Process when he starts working on the issue,
5. User input required : if required more information from user, consultant will change status as user inputs required.
6. Work in process: Once user gives input, consultant will start working on that and put the status as WIP.
7. User testing: Once solution is provided and sent for user testing
8. User Accpetant: User will test and accept / reject the solution
9. Completed : everything goes fine consultant / user will change status as completed
10. Close: Support team / User will change the status as Close after completion of query.
CITRIX: Citrix is the secured VPN connection tool through which you can access your client's system. To access the system through citrix you need to have secure ID which will generate passwords for your ID for every 30 seconds.
You will get documentation from your project team.
Hope this will help.
Regards
Arif Mansuri
Reward if answer is helpful. -
Need help finding AWT Tool kit
I want to learn how to creat a GUI but i need the AWT tool kit befor i start i need one for j2sdk1.4.2_05.
Any help that can point me in the right direction would be great thanks.AWT is highly annoying and confusing compared to Swing.
import javax.swing.*;That will give you all of the classes you need for the GUI itself.
import java.awt.event.*;
import java.awt.*;That will give you other classes for events and other things needed to make a good GUI.
Don't mix Swing and AWT components.
As for actually learning how to make GUIs and such:
http://java.sun.com/docs/books/tutorial/uiswing/ -
Need help on Analysing the oracle code.
Hi,
Here i try to frame question, pls understand and give the best way to solve this.
We have running 20 to 30 unix scripts on daily basis. Each script has connected to oracle session and execute the corresponding packages & procedures. Some scripts are running at the same time. At this time oracle code in the script is not executed due to the table locking in other script. We have oracle trace files whenever the oracle code is not executed it shows the error and terminates the oracle session.
Examples:
Below the sample oracle execution log file. where we get the error and terminate the oracle session for your reference.
==================================================================================
SQL*Plus: Release 11.2.0.1.0 Production on Mon Dec 10 06:18:45 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
SQL> SQL>
Session altered.
SQL> 2 3 4 5 6 7 8 9 begin
ERROR at line 1:
ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired
ORA-06512: at "SIEB7P04.P_ARCHIVE_TBL", line 42
ORA-06512: at line 4
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
goin into RunProcedures Function
0
SQL*Plus: Release 11.2.0.1.0 Production on Mon Dec 10 06:19:19 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
SQL> SQL>
Session altered.
SQL> 2 3 4 5 6
PL/SQL procedure successfully completed.
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
goin into Check error report Function
Pkg_Tfm_If_Merge OK
==========================================================================
When you observe the above code, in unix script we try to connect to the oracle instance 2 times,
1st instance it was terminated with some error.
2nd instance it was successfully executed the oracle code.
By analysing the above log we found where the error was occured and the reson behind this also we know.
Assume the script called the procedure 'P_ARCHIVE_TBL' 5 times and the procedure works on different parameter(we could say different table) each time it was called.
Is it possible for us to know in which procedure call, it is errored out.
For any information pls revert us or ping me to this mail [email protected],
Regards,
Mani.Hi,
You would need to have an exception block in your pl/sql code. You should also save table name in a variable when this procedure is called for every table. You should return/print the error code from exception block alongwith the table name and then you will be able to know that during which call of this procedure, the error was returned.
Salman -
Need help in analysing the error in JasperReportIntegration Test Applicatio
Our DBA installed Jasper Reports Integration kit Version 1.1.0.0 in our test environment. Apex version is 3.2.1.00.12. Oracle database is 11g and Apache Tomcat is 7.0.26
I was able to bring up the Jasper Reports Integration test application. When I navigate to "Report Tester" tab, changed the JasperReportIntegration URL to the correct localhost and then cklick the "Show report (directly)" button, I got this message:
Jun 12, 2012 11:41:58 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet [ReportWrapper] in context with path [JasperReportsIntegration] threw exception [Servlet execution threw an exception] with root cause
Throwable occurred: java.lang.NoClassDefFoundError: net.sf.jasperreports.engine.util.JRStyledTextParser (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:140)
at net.sf.jasperreports.engine.fill.JRBaseFiller.<init>(JRBaseFiller.java:121)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:77)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:87)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:57)
at net.sf.jasperreports.engine.fill.JRFiller.createFiller(JRFiller.java:142)
at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:52)
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:417)
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:247)
at de.oc.integration.jasper.webapp.ReportWrapper.service(ReportWrapper.java:318)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:224)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:169)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:168)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:927)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:407)
at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:987)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:579)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:307)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:897)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:919)
at java.lang.Thread.run(Thread.java:736)
Can anyone help me understand this error and let me know if this message is caused by installing the jasper report integration kit incorrectly?
Thanks.
Edited by: bratz69 on Jun 12, 2012 7:35 PMHi Dietmar,
Thanks for your reply.
There's no jasperreports-fonts-3.7.4.jar file in the webapps/JasperReportsIntegration/WEB-INF/lib folder. The only font file available is jasperreports-fonts-4.5.0.jar. I've downloaded the 3.7.40 jar file and saved it in the same folder without deleting the 4.5.0.jar. I tried to run the Test application again and still give me the same error.
Jun 13, 2012 3:58:26 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet [ReportWrapper] in context with path [JasperReportsIntegration] threw exception [Servlet execution threw an exception] with root cause
Throwable occurred: java.lang.NoClassDefFoundError: net.sf.jasperreports.engine.util.JRStyledTextParser (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:140)
at net.sf.jasperreports.engine.fill.JRBaseFiller.<init>(JRBaseFiller.java:121)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:77)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:87)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:57)
at net.sf.jasperreports.engine.fill.JRFiller.createFiller(JRFiller.java:142)
at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:52)
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:417)
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:247)
at de.oc.integration.jasper.webapp.ReportWrapper.service(ReportWrapper.java:318)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:224)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:169)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:168)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:927)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:407)
at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:987)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:579)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:307)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:897)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:919)
at java.lang.Thread.run(Thread.java:736)
I also tried the suggestion from the link provided by Nick. However, the syntax is for SUN environment and we are using IBM so I searched the equivalent of that command in IBM. Our DBA added the Java system property in the startup script by adding these 2 lines. But it errored out on the first 2 lines. I'm not sure if I do have the right syntax.
java.version=1.4
java.awt.headless=true
----- Error
27) ./startup.sh
./startup.sh[25]: java.version=1.4: not found
./startup.sh[26]: java.awt.headless=true: not found
Using CATALINA_BASE: /dbfupg/apache-tomcat-7.0.26
Using CATALINA_HOME: /dbfupg/apache-tomcat-7.0.26
Using CATALINA_TMPDIR: /dbfupg/apache-tomcat-7.0.26/temp
Using JRE_HOME: /usr/java6/jre
Using CLASSPATH: /dbfupg/apache-tomcat-7.0.26/bin/bootstrap.jar:/dbfupg/apache-tomcat-7.0.26/bin/tomcat-juli.jar
----- Start up script
27) cat startup.sh
#!/bin/sh
java.version=1.4
java.awt.headless=true
os400=false
case "`uname`" in
OS400*) os400=true;;
esac
# resolve links - $0 may be a softlink
PRG="$0"
while [ -h "$PRG" ] ; do
ls=`ls -ld "$PRG"`
link=`expr "$ls" : '.*-> \(.*\)$'`
if expr "$link" : '/.*' > /dev/null; then
PRG="$link"
else
PRG=`dirname "$PRG"`/"$link"
fi
done
PRGDIR=`dirname "$PRG"`
EXECUTABLE=catalina.sh
# Check that target executable exists
if $os400; then
# -x will Only work on the os400 if the files are:
# 1. owned by the user
# 2. owned by the PRIMARY group of the user
# this will not work if the user belongs in secondary groups
eval
else
if [ ! -x "$PRGDIR"/"$EXECUTABLE" ]; then
echo "Cannot find $PRGDIR/$EXECUTABLE"
echo "The file is absent or does not have execute permission"
echo "This file is needed to run this program"
exit 1
fi
fi
exec "$PRGDIR"/"$EXECUTABLE" start "$@"
BTW, Thanks for the update on the new version.
Thanks!
Edited by: bratz69 on Jun 13, 2012 4:48 PM -
Need help on ETL Tool research .
Hi,
I am conducting a survey as a part of the research I am doing on ETL tools. It will be very helpful if you can fill up all the details.If you are too busy,I will request you to fill up atleast the ones with **) marks pls.
# Your Name -
# Your E-Mail ID -
# Company Name with URL -
# Your Client for the ETL project -
**) The Name of the ETL Tool Vendor with URL -
# Any particular reason to select that tool -
# Maintenance fee of the tool -
# Number of licences used by your company -
# The peak volume handled in a day in ( in MB ) -
**) The total number of files handled in a day -
**) The total number of programs/interfaces -
# The scheduling done by ETL Scheduler of vendor (Y/N) -
# Used the OS Scheduler for scheduling (Y/N) -
# Used the database jobs(Y/N) -
**) Used external program(Y/N) -
**) If so the technologies used for the program & a brief description with features of the scheduler
Once filled pls mail me at [email protected]
(ranjeesh007 at yahoo dot com)
with thanks in advance
RanjeeshRanjeesh,
If it only was that simple to get such information, most analyst firms and industry publications would be out of business.
Nikolai Rochnik -
Totally frustrated. Need help with type tool in CS2.
Must start by admitting I'm embarrassed to have to even find myself asking this question. . . But after working with PageMaker since Ver. 2.0 in the early '80s, finally was forced to switch to CS2 when I had to replace my Mac/Intel computer 3 (or was it 4 years ago?). Did so fighting and cursing all the way, and I'm still having trouble typing in Photoshop . . . not just today, but EVERY TIME I sit down to work on a project.
Most are brochures and display ads, and though friends and colleagues insist my real problem is that I should be setting them up in InDesign, I'm convinced it's easier to work on graphics and text simultaneously in Photoshop.
My problem is in grabbing text blocks in order to edit them. Occasionally I'm able to highlight the text I need, but usually I keep getting new type layers instead. I know it should not be this difficult, but as soon as I select the text with the cursor, I get a new, empty text box.It doesn't seem to matter if I am in the layers or edit mode.
I may not be the most technically advanced Adobe user, but I'm not stupid. What the heck am I doing wrong? Can someone please steer me right?Try this on for size:
Type Tool Tips for Photoshop
Most folks understand how to create text in Photoshop. You select the Type Tool from the Toolbox, or you tap the "T" key on your keyboard. Then, in the Character Palette you set the attributes for font, color, size, etc. A simple click in your document window will mark the spot where you may begin typing unbounded "point" text. Or, you click and drag in your document window to create a paragraph text box. Type out your text, then tap your "Enter" key to commit the text to its new layer.
It's pretty straightforward, and Photoshop offers a decent set of tools to adjust how your text looks. One hitch that long-timers will tell you about, though: It's generally accepted that Photoshop isn't the best application to be using if you have to have to create a lot of text because it doesn't have all of the adjustment functions necessary to produce large amounts of professional-quality text. Well, the real world being what it is, sometimes, and for some users, Photoshop is the only application they have to work with; might as well make the best of it, right?
So, once you have text entered onto a layer in your document, how do you then reselect iteither all of it or just a portion and navigate through it easily? What follows will answer some of those questions.
Note: The keyboard shortcuts that follow assume you are using a Mac. If you're using Windows, substitute the CTRL key for "Command."
Double-Click on the boxed 'T' thumbnail on the desired Text Layer in the Layers Palette. This will select and highlight all of the text on that layer.
Then, if you want, you can use some keyboard shortcuts to move the "Blinking Bar" Type Tool cursor through the text.
Assuming that your text is enclosed in a click-and-dragged out paragraph text box--When all text is highlighted:
"Home" key will move cursor to the beginning of first line of text.
"End" key will move cursor to the end of last line of text.When text is NOT highlighted, but cursor is flashing within the text:
"Home" key moves cursor to the beginning of the line it's in.
"End" key moves cursor to the end of the line it's in.
Command + "Home" moves cursor to beginning of first line of text.
Command + "End" moves cursor to end of the last line of text.
Shift + "Home" selects text from cursor position to the beginning of the line it's in.
Shift + "End" selects text from cursor position to the end of the line it's in.
Shift + Command + "Home" selects text from cursor position to the beginning of the first line of text.
Shift + Command + "End" selects text from cursor position to the end of the last line of text.Arrow keys can also be used to select text in various ways. When your cursor is flashing within the text:
Shift + Right Arrow cumulatively selects text one character or space at a time, from cursor position, progressing toward the end of the text.
Shift + Left Arrow cumulatively selects text one character or space at a time, from cursor position, progressing toward the beginning of the text.
⇒ Add the Command key to select whole words at a time, in either direction.
Shift + Up Arrow selects text from cursor position back to the next line above the cursor.
Shift + Down arrow selects text from cursor position forward to the next line below the cursor position.
⇒ Add the Command key to select text starting from the cursor position, and accumulating either back to the beginning of the first line, or forward to the end of the last line.
That covers most of what (or more than) you need to know to navigate through and highlight text. There are some other key combos, and now that you have an idea of what to do, I'll let you experiment and discover them on your own.
Type Tool Visual Indicators
Keep a close eye on your Type Tool cursor as you move it near to and away from a hunk of text in your document window.
When you see it as a plain old "I-Bar" cursor⇒
⇒...that means that it's ready to select a position within that text, or to select a hunk of that text.
When you see a "boxed I-Bar" cursor⇒
⇒...that means your cursor is outside of the selectable area for the current text, and is ready for you to click (to start right in typing some unbounded point text) or click-n-drag (to create a paragraph text box). This will, of course, create a new text layer.
How can you get a visual indicator of where that selectable area for current text begins and ends without blindly moving your Type Tool cursor around the text? Double-Click on the "Boxed-T" thumbnail in the Layers Palette. The text for that layer will become highlighted in your document window. See the black area that surrounds the text? That shows you the actual space occupied by the characters. If your Type Tool cursor is inside this area, it will display the plain "I-Bar" cursor. If it's outside of that area, it will display the "Boxed I-Bar" cursor.
Want to FORCE Photoshop to create a new Type Layer, even though you're seeing the plain I-Bar cursor?
Hold the SHIFT key, then either click, or click-n-drag out a paragraph text box.
Info assembled & provided by phosphor.digital.network. Please note that this is a first draft and is not meant to be complete. There may also be some mistakes. Relax...if you point 'em out, I'll fix 'em. -
Hello I have Pro Tools m powered 8. I need an apple to do what i need to do.Just a Couple of tracks nothing real heavy. I dont have much money so Im considering a G5 cause I cant really afford a new mac. If I get a g5 which one is the best? I cant get quad..people want as much as a new mac. will a 1.6ghz with some up grades make do for now??? thank you.
Hey Ted,
I love my G5 as much as the next guy, but why not simply get a mini? They are great computers, cheap, and would keep you modern in terms of cpu power & efficiency. But I guess that assumes you have no external gear that requires a PCI slot. PCI needed? -
Need help with Pen Tool Stroke.
Hello,
Since my friends have been trying to teach me how to make swirls using the pen tool and stroke, i've been the only one who cannot do it. I make a path with the pen tool, I right click then click Stroke path however, it just seems to do nothing. I get the option but when I click on it, it doesn't do what its meant to. I am doing it exactly how my friends are doing it too, thats whats frustrating. I have had so many problems with Photoshop, im a beginner.
I have been able to resolve this problem by clicking on Paths on the right to the layers, but I can't use the simulate pressure feature, unless there is another way.
Also, if there is any tutorials anyone could link me? Im hoping to set up a business when im old enough, for creating logos and facebook covers and im not sure how to go about this.
Thanks guys
(I use Photoshop CS6 on Windows 7 from Creative Cloud without a tablet.)Hi,
Have you installed the latest updates for photoshop cs6 by going to Help>Updates from within photoshop cs6?
Resetting the photoshop preferences might possibly help as well:
http://forums.adobe.com/thread/375776?tstart=0
If you use the method that you mention where you do it from the paths panel (right click on the path thumbnail in the paths panel) and then click on the Simulate Pressure, you also have to have
one of the pressure options enabled in the the Brush panel (Window>Brush) such as under Shape Dynamics>Size Jitter and then set the drop-down to Pen Pressure before using Stroke Path.
Maybe you are looking for
-
Sync a second mac to iCloud Photo library
Hey guys. I have uploaded the entire photo library from mac 1. I want the same library on mac 2 but I don't want to download the entire 80gig. Does anyone know what would happen if I transfer the library via usb to the second mac ? Would it upload a
-
How to use 'REQUEST' value on PL/SQL
Hi All, I have assigned 'SEARCH' as button request to search button. I want to use this value in PL/SQL some thing like IF REQUEST='SEARCH' THEN --do something ELSE --do something else END IF; Can any one suggest how to access the 'REQUEST' value? Th
-
HT4972 How can I update to iOs5 if I no longer have the PC I normally sync my iphone with
The pc I use to backup and sync my iphone with has crashed and I am no longer able to use it. I need to update to iOs5. My friend has loaned me her pc, how can I update without losing all of my data.
-
I bought adobe CS6 design standard (CD) last year in the month of july and didn't active my product yet. I bought in from the University of Washington, Seattle store on a student and teacher licensing. I have the product code with me. I am a Mac user
-
Can you make a script for select cells?
Hi everyone How can I tell the script no matter my selection in which cell or cells and what kind of select in cells I want to select that table from top (first row) to first empty row see pics: before select: selected: thanks John