Need Help Syncing Using iTunes
How can I control what gets synced using ITunes? Usually I only want to sync my Outlook Contacts and Calendar between my computer and iPhone, and occassionally some music, but my apps get synced as well.
click the black/white square button on the top left of your screen, then click 'show menu bar'.
In the menu bar, then click 'view' and then 'show side bar'
Now it might look somewhat familiar.
After this: http://support.apple.com/kb/ht1386
Good luck
Similar Messages
-
Newbie to MacBook needs help with using Itunes with external hard drive...
I got a MacBook yesterday. I am trying set my Itunes up but having a big problem. When I try to sync music from my external TB hard drive into Itunes, the music is apparently being copied into the laptop HD and is being synced from there, instead of straight from my TB HD. I WANT the music to sync straight from the external HD and NOT being copied in the Mac HD first and then synced like it is doing right now. I don't want to use the Mac's hard drive because I have limited HD space on my Mac and unlimited external capacity. Can anyone help me in setting this up. i've looked for answers but can't seem to find on here. Thanks for all the help. I love this Mac and this is the only real bump I've had. Thanks again.
Turn off the option to "copy files to iTunes Music folder when adding to library" is set in the iTunes -> Advanced preferences". iTunes will then just link to the tracks on the external drive rather than copying them to the internal. If you also want future imports and purchases to be saved to the external drive, change the location for the iTunes Music folder in the iTunes -> Advanced -> iTunes Music Folder location preference.
Regards. -
I need help syncing my contacts between Outlook and iPhone using iTunes. I used the knowldge document and set it up to transfer my Outlook contacts to the iphone using itunes.
In contacts on the iphone I only see the email addresses.
Yet in Outlook I have email, snail mail and phone numbers.
I followed the knowledge document from iphone.
I did it once, didn't work so deleted all the contacts from the phone and tried again. Same result. I have a PC using Windows 7 64 bit.You can't access an Exchange account via ActiveSync with the Address Book and iCal on your Mac.
You can access a MM account with Outlook on your PC at work and keep your MM email account server stored mailboxes synced between your PC at work, your iPhone, and the MM "cloud". Not sure about syncing MM contact info and calendar events with Outlook at the same time with an Exchange account.
This will not provide for syncing your Exchange account contact info and calendar events with the Addresss Book and iCal on your Mac because the accounts are separate.
You can access an Exchange account and a MM account at the same time with the iPhone's mail client, and sync contact info and calendar events over the air with both accounts at the same time. You can view combined contact info or separately for each account, and the same for calendar events. -
Need help with Itunes transferrs and can I use my Edge phone as a router?
I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone
Is this an iPhone?
Set it up using the AppleID you used on the previous iPhone. -
I need help syncing my computer outlook email (through Yahoo) with my iphone. When I delete an email on my computer it is still in my inbox on my phone. Please help.
Your computer is probably set up to access your Yahoo mail using POP3. POP3 does not synchronize with the server. For full synchronization, you will need to use IMAP instead. See the Yahoo mail help pages for instructions on how to configure your mail client.
-
I need help Syncing my ipod to my mac. It has music on the mac currently but I want both my ipod music and the mac music together but it says i have to delete my ipod and only have the Laptop music on it. is there anyway to have both?
I got a Mac and started buying music on it, and My PC has all of my whole Itunes library which is like 1000+. Well I want to put all of my music on my Mac, But everytime I plug it in and ask it to sync all music it tells me that I have to erase my Ipod and sync in with the music on my Mac... Gosh its so confusing.
-
Need help in using FM BAPI_MATERIAL_SAVEDATA
Gurus,
I need help in using the FM BAPI_MATERIAL_SAVEDATA. The FM is returning a message that says "The field MARA-MEINS/BAPI_MARA-BASE_UOM(_ISO) is defined as a required field; it does not contain an entry".
I have supplied the necessary details and yet the FM won't push through.
If possible, please post sample codes.
Below is my sample code:
===============================================
REPORT zmm_materialupload.
eject
$$******************************************************************************
$$ TYPES
$$******************************************************************************
eject
$$******************************************************************************
$$ INTERNAL TABLES (custom structure
$$******************************************************************************
eject
$$******************************************************************************
$$ RANGES
$$******************************************************************************
eject
$$******************************************************************************
$$ FIELD-SYMBOLS
$$******************************************************************************
eject
$$******************************************************************************
$$ PARAMETERS & SELECT-OPTIONS
$$******************************************************************************
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-001.
*SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECT-OPTIONS: s_mtart FOR mara-mtart.
SELECT-OPTIONS: s_mbrsh FOR mara-mbrsh DEFAULT 'P'.
SELECT-OPTIONS: s_werks FOR marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS: s_lgort FOR marc-lgpro DEFAULT 'OPSL' OBLIGATORY.
PARAMETERS: p_path LIKE rlgrap-filename DEFAULT 'C:\Documents and Settings\training_11\Desktop\Book4 (2ITEMS).txt' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FNAME'
IMPORTING
file_name = p_path.
eject
$$******************************************************************************
$$ START-OF-SELECTION
$$******************************************************************************
START-OF-SELECTION.
PERFORM check_input.
PERFORM get_file.
PERFORM filter_input.
PERFORM populate_tabs.
PERFORM bapi_mat.
eject
$$******************************************************************************
$$ FORMS
$$******************************************************************************
FORM bapi_mat.
LOOP AT it_tab INTO wa_tab.
CALL FUNCTION 'BAPI_MATERIAL_GETINTNUMBER'
EXPORTING
material_type = wa_tab-mtart
industry_sector = wa_tab-mbrsh
required_numbers = 1
TABLES
material_number = it_matnr.
ENDLOOP.
LOOP AT it_matnr INTO wa_matnr.
READ TABLE it_tab INTO wa_tab INDEX sy-tabix.
wa_tab-matnr = wa_matnr-material.
MODIFY it_tab FROM wa_tab INDEX sy-tabix.
ENDLOOP.
PERFORM populate_tabs.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = it_headdata
clientdata = it_clientdata
clientdatax = it_clientdatax
plantdata = it_plantdata
plantdatax = it_plantdatax
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
valuationdata = it_valuationdata
valuationdatax = it_valuationdatax
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA =
SALESDATAX =
STORAGETYPEDATA =
STORAGETYPEDATAX =
flag_online = ' '
flag_cad_call = ' '
NO_DEQUEUE = ' '
NO_ROLLBACK_WORK = ' '
IMPORTING
return = it_return
TABLES
materialdescription = it_materialdescription
unitsofmeasure = it_unitsofmeasure
unitsofmeasurex = it_unitsofmeasurex
internationalartnos = it_internationalartnos
materiallongtext = it_materiallongtext
taxclassifications = it_taxclassifications
returnmessages = it_returnmessages
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
IF sy-subrc = 0.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'
IMPORTING
return = it_return.
ENDFORM. "bapi_mat
*& Form GET_FILE
text
FORM get_file.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
text = 'Getting data from file...'.
MOVE: p_path TO gv_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = gv_file
filetype = 'ASC'
has_field_separator = 'X'
read_by_line = 'X'
TABLES
data_tab = it_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "GET_FILE
*& Form check_input
text
FORM check_input.
Material Type
IF s_mtart-low IS INITIAL AND s_mtart-high IS INITIAL.
s_mtart = 'IEQ'.
s_mtart-low = 'ABF'. "Waste
s_mtart-high = 'ZTRD'. "Stock Items
APPEND s_mtart.
ENDIF.
IF s_mtart-low IS NOT INITIAL AND s_mtart-high IS INITIAL.
MOVE: s_mtart-low TO s_mtart-high.
ENDIF.
Industry Sector
IF s_mbrsh-low IS INITIAL AND s_mbrsh-high IS INITIAL.
s_mbrsh = 'IEQ'.
SELECT mbrsh
FROM mara
INTO TABLE it_mbrsh.
s_mbrsh-low = wa_mbrsh-mbrsh.
LOOP AT it_mbrsh INTO wa_mbrsh.
s_mbrsh-high = wa_mbrsh-mbrsh.
ENDLOOP.
APPEND s_mbrsh.
ENDIF.
IF s_mbrsh-low IS NOT INITIAL AND s_mbrsh-high IS INITIAL.
MOVE: s_mbrsh-low TO s_mbrsh-high.
ENDIF.
Plant
IF s_werks-low IS INITIAL AND s_werks-high IS INITIAL.
s_werks = 'IEQ'.
s_werks-low = '1000'.
s_werks-high = '2000'.
ENDIF.
IF s_werks-low IS NOT INITIAL AND s_werks-high IS INITIAL.
MOVE: s_werks-low TO s_werks-high.
ENDIF.
Storage Location
IF s_lgort-low IS NOT INITIAL AND s_lgort-high IS INITIAL.
MOVE: s_lgort-low TO s_lgort-high.
ENDIF.
ENDFORM. "check_input
*& Form Filter_input
text
FORM filter_input.
SORT it_tab BY matnr mtart mbrsh werks lgort.
LOOP AT it_tab INTO wa_tab.
IF wa_tab-mtart NOT IN s_mtart.
DELETE it_tab WHERE mtart NOT IN s_mtart.
ENDIF.
IF wa_tab-mbrsh NOT IN s_mbrsh.
DELETE it_tab WHERE mbrsh NOT IN s_mbrsh.
ENDIF.
IF wa_tab-werks NOT IN s_werks.
DELETE it_tab WHERE werks NOT IN s_werks.
ENDIF.
IF wa_tab-lgort NOT IN s_lgort.
DELETE it_tab WHERE lgort NOT IN s_lgort.
ENDIF.
ENDLOOP.
ENDFORM. "Filter_input
*& Form populate_tabs
text
FORM populate_tabs.
LOOP AT it_tab INTO wa_tab.
MOVE: wa_tab-matnr TO wa_headdata-material,
wa_tab-mbrsh TO wa_headdata-ind_sector,
wa_tab-mtart TO wa_headdata-matl_type,
'X' TO wa_headdata-basic_view,
'X' TO wa_headdata-sales_view,
'X' TO wa_headdata-purchase_view,
'X' TO wa_headdata-mrp_view,
'X' TO wa_headdata-account_view.
wa_tab-matkl TO wa_clientdata-matl_group,
wa_tab-meins TO wa_clientdata-base_uom,
wa_tab-groes TO wa_clientdata-size_dim,
wa_tab-gewei TO wa_clientdata-unit_of_wt,
wa_tab-ntgew TO wa_clientdata-net_weight,
'X' TO wa_clientdatax-matl_group,
'X' TO wa_clientdatax-base_uom,
'X' TO wa_clientdata-size_dim,
'X' TO wa_clientdatax-unit_of_wt,
'X' TO wa_clientdatax-net_weight,
wa_tab-werks TO wa_plantdata-plant,
wa_tab-ekgrp TO wa_plantdata-pur_group,
wa_tab-prctr TO wa_plantdata-profit_ctr,
wa_tab-werks TO wa_plantdatax-plant,
'X' TO wa_plantdatax-pur_group,
'X' TO wa_plantdatax-profit_ctr,
wa_tab-werks TO wa_valuationdata-val_area,
wa_tab-bklas TO wa_valuationdata-val_class,
wa_tab-peinh TO wa_valuationdata-price_unit,
wa_tab-verpr TO wa_valuationdata-moving_pr,
wa_tab-stprs TO wa_valuationdata-std_price,
wa_tab-xlifo TO wa_valuationdata-lifo_fifo,
wa_tab-werks TO wa_valuationdatax-val_area,
'X' TO wa_valuationdatax-val_class,
'X' TO wa_valuationdatax-price_unit,
'X' TO wa_valuationdatax-moving_pr,
'X' TO wa_valuationdatax-std_price,
'X' TO wa_valuationdatax-lifo_fifo.
APPEND wa_headdata TO it_headdata.
APPEND wa_clientdata TO it_clientdata.
APPEND wa_plantdata TO it_plantdata.
APPEND wa_valuationdata TO it_valuationdata.
MODIFY it_tab FROM wa_tab TRANSPORTING matnr.
ENDLOOP.
ENDFORM. "populate_tabs
$$******************************************************************************Hai.
check the below example.
REPORT z34332_bdc_create_material .
data: la_headdata type BAPIMATHEAD,
la_clientdata type BAPI_MARA,
la_CLIENTDATAX type BAPI_MARAX,
la_return type BAPIRET2.
data: i_materialdescription type table of BAPI_MAKT,
wa_materialdescription like line of i_materialdescription.
la_headdata-MATERIAL = '000000000000000004'.
la_headdata-IND_SECTOR = 'M'.
la_headdata-MATL_TYPE = 'FERT'.
la_clientdata-BASE_UOM = 'FT3'.
la_CLIENTDATAX-BASE_UOM = 'X'.
la_clientdata-MATL_GROUP = '01'.
la_CLIENTDATAX-MATL_GROUP = 'X'.
wa_materialdescription = 'TEST'.
append wa_materialdescription to i_materialdescription.
clear: wa_materialdescription.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = la_headdata
CLIENTDATA = la_clientdata
CLIENTDATAX = la_CLIENTDATAX
PLANTDATA =
PLANTDATAX =
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
VALUATIONDATA =
VALUATIONDATAX =
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA =
SALESDATAX =
STORAGETYPEDATA =
STORAGETYPEDATAX =
FLAG_ONLINE = ' '
FLAG_CAD_CALL = ' '
IMPORTING
RETURN = la_return
TABLES
MATERIALDESCRIPTION = i_materialdescription
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
write: la_return-TYPE, ',', la_return-MESSAGE.
clear: la_headdata, la_return, la_clientdata, la_clientdatax.
regards.
sowjanya.b. -
Need help in using ActiveX to retrieve a VARIANT
Need help in using ActiveX to retrieve a VARIANT.
Variant is shown as var{VT_Ul1,1} in debug
Using the following
hr = CA_VariantGetShort (&var, &value);
I get 0 for my answer instead of 1.
Solved!
Go to Solution.Answered my own question.
VT_Ul1 is an unsigned char and not a short. -
I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?
The way that Dropbox works is that it keeps a copy of all your files in your local Dropbox folder on your hard drive (which is, by default, directly under your home folder). Adding files to that folder will sync them to the Dropbox server.
You do of course have to download the Dropbox application to enable this (download link at the top right of http://dropbox.com ).
Matt -
How to Syncing using iTunes 11.1.5 for Windows
How to Syncing using iTunes 11.1.5 for Windows
The same way one would sync with any other version of iTunes.
Connect the device.
Select the content desired to sync.
Sync. -
Need help on Using Oracle Acces Manager 11g
Hi
I Need help on Using Oracle Acces Manager Admin console to configure for SSO.
I am new to Identity Management
I have installed OAM 11g and configured for OAM in new weblogic domain
Please help to proceed forward.
Thanks
SwapnilHi
Thanks for your reply
I am able to login to the console
I am unable to login the the weblogic server from another machine but abl eto do so from the machine where all this is installed
What i feel is there needs to be some configurataion maybe policy or Agent
IDMDomainAgent is configured and so is the OAM server configured .
Please advice some books or link how to do achieve logging into the weblogic em/console from a remote machine
Thanks in Advance -
I need help on using up Microsoft.
i need help on using up microsoft
Moderator's Note: Post was moved and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.Please, we need the error message word for word. If you do not get an error message, please, elaborate in greater detail …
Furthermore, which phone model do you use? -
I Need Help Syncing All My Music From My Desktop To My IPhone 5 Helllllllllllp Please
Hi can someone help me please I have a IPhone5 64g I need help syncing all my music from my I tunes library. I have a total of 3600 songs on my I tunes library which is 26g on my desktop all the boxes are checked on each song when I hit sync im only getting 1400 songs wich is only 10g of music I want all 26g of musicon my IPhone 5 when i hit sync all my music are not syncing and I need helping syncing all my music can someone help me please?
Are you upgrading from an existing iPhone? Back up old phone, then restore new phone with the cable. I had to do this a number of time to get all my purchases across.
-
I just purchased the iphone 4 for verizon and I need to sync with itunes but my macbook runs X OS 10.4.11. How could I download itunes 10?
You will need to upgrade your MacBook OS to at least 10.5.8 or preferably Snow Leopard 10.6.X
Stedman -
I Need help changing my name on lipad and iPhone to sync. I have two different name1 is from my laptop and the other is from iPad ,so I can't sync iTunes. Please help!!!!!!
Plug the iphone in and go to the music tab in the iphone,not your itunes library.There will be a button in the borrom right that says autofill. Click that and it should thransfer all your music. It worked for me,and i had the same problem.
Maybe you are looking for
-
how do i create a calendar
-
BC Photo Gallery - Center Thumbnail Image
How to edit BC Photo Gallery Module so thumbnail image is centered Example a square photo next to a tall rectangle image The tall image is align left - how to make it so image is centered in thumbnail area? Message was edited by: WillzShireDDC
-
AFP will drop current connections and not allow future connections
We are having a puzzling problem that has gotten worse over the last few weeks. We are running a single Mac OS X 10.6.2 Server in a Golden Triangle configuration with multiple Windows servers on the network. It started as a once a day thing where AFP
-
Website is slow using IE both 6 or 7 .
hello everyone, I have been facing a problem with my website using IE 6 and 7. each time anyone opens the website with it , it gets extremely slow. I have tried to remove alot of the picture and make it less rich but it doesn't seem to solve the prob
-
[solved] Search down or very small result set?
The forum search is turning up almost nothing for me. For example, searching for "pacman" on all boards yields 7 results, "kernel" gets 9, "PKGBUILD" gets 5. There's nothing older than 9 Dec 2011. Am I missing something or did the search index get wi