Need help text_io function not working in 11i
Hi,
I am new in form devlopment Kindly help
We create a customize form on 6i then deploye it on our Oracle apps Server with EBS. I want to create a form using form 6i which read a text file from client side and insert data into table i try text_io function but its not working after deployed form on server and also try webutil function but its not working with oracle forms 6i kindly help how can i do this while using forms 6i i will be very thankful.
Thanks
Hi;
Please check first below link
Forms 6i Developer and Forms 6i Services - Demonstrations and Sample Code
http://www.oracle.com/technology/sample_code/products/forms/6idemos.html
Also check below googling which exists for step by step guide
www.pdfoo.com/result-Oracle-forms-6i-step-by-step-tutorial.html
www.pdfoo.com/resultpage9~forms-6i-step-by-step-application-development -examples.html
Also see:
http://www.google.com.tr/#hl=tr&biw=1259&bih=793&q=forms+6i%2Bstep+by+step&aq=f&aqi=&aql=&oq=&gs_rfai=&fp=71a534c4a5161590
Regard
Helios
Similar Messages
-
After upgrading to maverick; help & other functions not working
After upgrading to maverick; help and other functions not working?
Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Help (F1) function not working
Acrobat 9.0: Trying to use the in-software help, I get only a basic introductory web page. No real contents or searchable help.
Is this normal, or is it broken. How to fix it? ("repair acrobat" from the help menu did not fix it.)I have been having this same issue with Acrobat X on our network and we are getting ready to roll it out to 2000 users.
I contacted Adobe Support but they weren't really of any help so I sent a bug report yesterday. By the time I came to work today, I had a response from them. Here is the information they provided:
Hello Sonya,
This is a know limitation with Acrobat X behind an authenticating proxy. Although the documents references are for CS5 they apply to Acrobat X as well since they use the same technology for Help. Here are some things to try:
Issue
Error "Online Help content cannot be displayed. Verify you can launch your web browser and have access to the Internet" when accessing help in Acrobat X.
Solution
Make the help contents available off-line. See KB http://kb2.adobe.com/cps/849/cpsid_84992.html
Access online help directly in a browsers at: http://help.adobe.com/en_US/acrobat/pro/using/index.html
Note the 'en_US' part of the link takes you to the English help file. Replace this with a different locale to go to that language version of the help. For example, to go to the French version of the help replace en_US with fr-FR like this: http://help.adobe.com/fr_FR/acrobat/pro/using/index.html
A list of available locales can be found here: C:\Program Files (x86)\Common Files\Adobe\HelpCfg. The folder names in the HelpCfg are the names of the locales which can be used.
Download the PDF version of the help from http://help.adobe.com/en_US/acrobat/pro/using/acrobat_X_pro_help.pdf See above for how to obtain different language versions of this PDF
Additional information
Acrobat X uses a new help client to display the Help contents. If this client is prevented from checking online it will give the error: "Online Help content cannot be displayed. Verify you can launch your web browser and have access to the Internet."
One reason the Help client is blocked from going online is when a (authenticating) proxy is used. Currently the help client is not compatible with such a proxy.
After reading the information provided, I searched for the Help Client and it wasn't on my computer. I downloaded and installed "Adobe Community Help Client" from the link below. Apparently, the Help Client is part of the installation for the CS5 Suite of products but not part of just Adobe Reader X or Acrobat X installations.
http://www.adobe.com/support/chc/
After installing the Help Client, I opened it and changed the preferences to open Help in the browser instead of the Help client. It takes a while to download the file to a local cache and then it opens in IE. -
Need help iPhone 5 not working correctly
my iPhone 5 keeps pressing all the keys around the key I want it to press on the keyboard also problems using lock screen numbers have re-started and the phone just reverts to not working correctly
also when I got this phone I did it from a back up of my old iPhone 4 but not all the songs have fully downloaded (they are there, but cannot play) when I look on iTunes it says I have no songs that arn't on my iPhone that I've bought?
Should I take my phone back to my carrier which is 3? Or make an appointment at the Genius Bar?Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
Backups do not contain media, all the media should be in iTunes on your computer. Simply select the content desired to sync to the device and sync. -
New user: need help logging in not working
I tried to setup using google talk. My email is working but ichat keeps coming back that my user name and password are not correct. I've tried changing them. Made new connections. Failed at all tries. I know someone posted earlier but to be honest I didn't understand the fix. Sorry! Strange but I am on my moms macbook but my macbook pro setup with not problem. The setting seem to all be the same. Thank you in advance.
And specifically from those pics what does your server say you are trying to login to ?
It is common that a Jabber Account will think the server will be the @gmail.com (Or @googlemail.com) from when you type in your Jabber ID, when it should be talk.google.com as in the pics.
2:26 PM Saturday; April 5, 2008 -
Need Help Ipod mini not working
I have a mini and it won't show up on my computer, at least I can't find it anywhere, if anyone one has had this problem please let me know if you remember some simple, and basic steps please write them out, I would greatly appreciate it, Thank You.
Unfortunately, there is no one ‘Silver Bullet’ answer for this issue. Many things can contribute to the problem. Here are various solutions that you can try to correct your problem. One should work.
First, make sure that the iPod is fully charged.
Try Resetting Your iPod while it's connected to the computer.
Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
This will often get it recognized. It may take several attempts.
Try closing and re-starting iTunes. There have been cases where iTunes refuses to see an iPod, but after re-starting, it works again.
Also try re-booting the entire computer. Especially if the PC has been operating for a long time &/or many programs have been opened and closed, repeatedly.
Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict.
If your iPod shows up in Explorer under 'my computer' try changing the drive letter: Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management. Right-Click on the iPod and select “change drive letter”. Choose something further along in the alphabet that is unused. Usually, “M”, “N”, “O” (or something similar).
If that doesn't work, Put Your iPod into Disk Mode then plug it in and you should be able to Restore the iPod
Your PC may have difficulty with the USB2 protocol and the iPod. See this Article for a possible solution: iPod not Recognized Correctly
Also try these hints (and the other suggestions above) from any other USB port you may have on the PC. Sometimes switching USB ports can make all the difference.
Also See:
Your Windows PC doesn't recognize iPod
iPod does not appear in iTunes or on the desktop
iPod appears in Windows Explorer but does not appear in iTunes“Strange iPod Behavior within Windows”
If all else fails, there have been some successes using the information in this post below. WARNING: I have absolutely no clue to what this download file does, and introducing it into your PC environment is risky. Some Forum posters have experienced less than benign results. Proceed at you own risk.
http://discussions.apple.com/message.jspa?messageID=1222335#1222335 -
Need Help - SPA112 suddenly not working
Bought the SPA112 a month ago, it worked fine freephoneline since day one, but today when people called and we answered the phone, we heard nothing. When I make outgoing calls, I hear nothing from the handset. I tried calling my cell phone, my cell rings, but I don't hear any rings from the handset too. I have tried reboot the ATA a few times, but no luck. I then looked around on the interent and found an upgrade firmware, applied firmware upgrade, but the problem is still there.
Name
Value
Model:
SPA112, 2 FXS
Hardware Version:
1.0.0
Boot Version:
1.0.1 (Oct 6 2011 - 20:04:00)
Firmware Version:
1.3.2 (014) May 9 2013
Recovery Firmware:
1.0.2 (001)
WAN MAC Address:
E0:2F:6D:78:5E:E2
Host Name:
SPA112
Domain Name:
(none)
Serial Number:
CCQ16520XD5
Current Time:
Sun, 30 Jun 2013 00:14:53
Does any one hear have the same problem? Can you please help to fix my problem?
Thank you,
tqlamHere is the system log. But something strange that as said in my post that I bought the device a month ago, but the log show date in Jan 1st, and only the last few line dated July 1st
Jan 1 00:00:04 SPA112 syslog.notice syslog-ng[121]: syslog-ng version 1.6.12 starting
Jan 1 00:00:04 SPA112 kern.notice [ 0.000000] Linux version 2.6.26.5 (jlai2@ubuntu) (gcc version 4.1.2) #1 PREEMPT Fri Dec 14 14:02:32 PST 2012
Jan 1 00:00:04 SPA112 kern.warning [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Jan 1 00:00:04 SPA112 kern.warning [ 0.000000] Machine: NXP PNX8181
Jan 1 00:00:04 SPA112 kern.warning [ 0.000000] Memory policy: ECC disabled, Data cache writeback
Jan 1 00:00:04 SPA112 kern.debug [ 0.000000] On node 0 totalpages: 7936
Jan 1 00:00:04 SPA112 kern.debug [ 0.000000] DMA zone: 62 pages used for memmap
Jan 1 00:00:04 SPA112 kern.debug [ 0.000000] DMA zone: 0 pages reserved
Jan 1 00:00:04 SPA112 kern.debug [ 0.000000] DMA zone: 7874 pages, LIFO batch:0
Jan 1 00:00:04 SPA112 kern.debug [ 0.000000] Normal zone: 0 pages used for memmap
Jan 1 00:00:04 SPA112 kern.debug [ 0.000000] Movable zone: 0 pages used for memmap
Jan 1 00:00:04 SPA112 kern.warning [ 0.000000] CPU0: D VIVT write-back cache
Jan 1 00:00:04 SPA112 kern.warning [ 0.000000] CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
Jan 1 00:00:04 SPA112 kern.warning [ 0.000000] CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
Jan 1 00:00:04 SPA112 kern.warning [17179569.184000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 7874
Jan 1 00:00:04 SPA112 kern.notice [17179569.184000] Kernel command line: console=ttyS1,115200n8 rootfstype=squashfs noalign half_image=0 verify=y Hw_Model=SPA112 Router_Mode=0
Jan 1 00:00:04 SPA112 kern.info [17179569.184000] PNX8181: Configured 66 Interrupts
Jan 1 00:00:04 SPA112 kern.warning [17179569.184000] PID hash table entries: 128 (order: 7, 512 bytes)
Jan 1 00:00:04 SPA112 kern.warning [17179569.184000] Console: colour dummy device 80x30
Jan 1 00:00:04 SPA112 kern.info [17179569.184000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:04 SPA112 kern.info [17179569.184000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan 1 00:00:04 SPA112 kern.info [17179569.188000] Memory: 31MB = 31MB total
Jan 1 00:00:04 SPA112 kern.notice [17179569.188000] Memory: 28296KB available (2804K code, 197K data, 120K init)
Jan 1 00:00:04 SPA112 kern.debug [17179569.188000] Calibrating delay loop... 110.08 BogoMIPS (lpj=220160)
Jan 1 00:00:04 SPA112 kern.warning [17179569.260000] Mount-cache hash table entries: 512
Jan 1 00:00:04 SPA112 kern.info [17179569.260000] CPU: Testing write buffer coherency: ok
Jan 1 00:00:04 SPA112 kern.info [17179569.264000] net_namespace: 484 bytes
Jan 1 00:00:04 SPA112 kern.info [17179569.264000] NET: Registered protocol family 16
Jan 1 00:00:04 SPA112 kern.info [17179569.264000] Board: found phy at 0x03, id 0x001cc815
Jan 1 00:00:04 SPA112 kern.info [17179569.264000] Board: Vega_PNX8181_BaseStation low-cost version detected.
Jan 1 00:00:04 SPA112 kern.info [17179569.264000] clock [intc] enabled
Jan 1 00:00:04 SPA112 kern.info [17179569.264000] clock [sctu] enabled
Jan 1 00:00:04 SPA112 kern.info [17179569.264000] clock [uart1] enabled
Jan 1 00:00:04 SPA112 kern.info [17179569.264000] clock [uart2] enabled
Jan 1 00:00:04 SPA112 kern.info [17179569.264000] clock [sdi] enabled
Jan 1 00:00:04 SPA112 kern.info [17179569.264000] clock [ebi1] enabled
Jan 1 00:00:04 SPA112 kern.info [17179569.264000] clock [ebi2] enabled
Jan 1 00:00:04 SPA112 kern.info [17179569.264000] clock [gpio] enabled
Jan 1 00:00:04 SPA112 kern.notice [17179569.264000] gpio_init: Registered PNX818 GPIO device
Jan 1 00:00:04 SPA112 kern.warning [17179569.264000] Board HW MODEL : 0x3
Jan 1 00:00:04 SPA112 kern.info [17179569.268000] clock [extint] enabled
Jan 1 00:00:04 SPA112 kern.info [17179569.268000] External Interrupt Controller registered
Jan 1 00:00:04 SPA112 kern.info [17179569.284000] NET: Registered protocol family 2
Jan 1 00:00:04 SPA112 kern.info [17179569.320000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:04 SPA112 kern.info [17179569.320000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jan 1 00:00:04 SPA112 kern.info [17179569.320000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:04 SPA112 kern.info [17179569.320000] TCP: Hash tables configured (established 1024 bind 1024)
Jan 1 00:00:04 SPA112 kern.info [17179569.320000] TCP reno registered
Jan 1 00:00:04 SPA112 kern.info [17179569.332000] NET: Registered protocol family 1
Jan 1 00:00:04 SPA112 kern.info [17179569.332000] clock [dmau] enabled
Jan 1 00:00:04 SPA112 kern.info [17179569.332000] probe succeded
Jan 1 00:00:04 SPA112 kern.info [17179569.332000] clock [iic] enabled
Jan 1 00:00:04 SPA112 kern.info [17179569.336000] squashfs: version 3.4 (2008/08/26) Phillip Lougher
Jan 1 00:00:04 SPA112 kern.warning [17179569.336000] squashfs: LZMA suppport for slax.org by jro
Jan 1 00:00:04 SPA112 kern.info [17179569.336000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
Jan 1 00:00:04 SPA112 kern.info [17179569.340000] msgmni has been set to 55
Jan 1 00:00:04 SPA112 kern.info [17179569.340000] io scheduler noop registered (default)
Jan 1 00:00:04 SPA112 kern.info [17179569.348000] HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
Jan 1 00:00:04 SPA112 kern.info [17179569.348000] N_HDLC line discipline registered.
Jan 1 00:00:04 SPA112 kern.info [17179569.348000] Non-volatile memory driver v1.2
Jan 1 00:00:04 SPA112 kern.info [17179569.348000] Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 2 ports, IRQ sharing disabled
Jan 1 00:00:04 SPA112 kern.info [17179569.348000] serial8250.0: ttyS0 at MMIO 0xc2004000 (irq = 24) is a 16550A
Jan 1 00:00:04 SPA112 kern.info [17179569.348000] serial8250.0: ttyS1 at MMIO 0xc2005000 (irq = 23) is a 16550A
Jan 1 00:00:04 SPA112 kern.info [17179569.352000] console [ttyS1] enabled
Jan 1 00:00:04 SPA112 kern.info [17179569.356000] DCC: JTAG1 Serial emulation driver driver $Revision: 1.1.1.1 $
Jan 1 00:00:04 SPA112 kern.info [17179569.360000] ttyJ0 at MMIO 0x12345678 (irq = 0) is a DCC
Jan 1 00:00:04 SPA112 kern.info [17179569.364000] brd: module loaded
Jan 1 00:00:04 SPA112 kern.info [17179569.368000] PPP generic driver version 2.4.2
Jan 1 00:00:04 SPA112 kern.info [17179569.372000] PPP MPPE Compression module registered
Jan 1 00:00:04 SPA112 kern.info [17179569.376000] NET: Registered protocol family 24
Jan 1 00:00:04 SPA112 kern.info [17179569.380000] PPPoL2TP kernel driver, V1.0
Jan 1 00:00:04 SPA112 kern.warning [17179569.384000] [ip3912] : Bridge Mode...
Jan 1 00:00:04 SPA112 kern.info [17179569.384000] clock [etn1] enabled
Jan 1 00:00:04 SPA112 kern.info [17179569.392000] ip3912_mii_bus: probed
Jan 1 00:00:04 SPA112 kern.info [17179569.396000] eth0: IP3912 at 0xc1600000 using 0:03 phy
Jan 1 00:00:04 SPA112 kern.info [17179569.400000] NFTL driver: nftlcore.c $Revision: 1.1.1.1 $, nftlmount.c $Revision: 1.1.1.1 $
Jan 1 00:00:04 SPA112 kern.notice [17179569.404000] physmap platform flash device: 02000000 at 80000000
Jan 1 00:00:04 SPA112 kern.debug [17179569.408000] CFI: Found no physmap-flash.0 device at location zero
Jan 1 00:00:04 SPA112 kern.err [17179569.408000] physmap-flash physmap-flash.0: map_probe failed
Jan 1 00:00:04 SPA112 kern.info [17179569.412000] NAND device: Manufacturer ID: 0xad, Chip ID: 0x75 (Hynix NAND 32MiB 3,3V 8-bit)
Jan 1 00:00:04 SPA112 kern.debug [17179569.416000] Bad block table found at page 65504, version 0x01
Jan 1 00:00:04 SPA112 kern.debug [17179569.416000] Bad block table found at page 65472, version 0x01
Jan 1 00:00:04 SPA112 kern.debug [17179569.416000] nand_read_bbt: Bad block at 0x001c4000
Jan 1 00:00:04 SPA112 kern.warning [17179569.416000] Using Full Image\'s RootFS
Jan 1 00:00:04 SPA112 kern.warning [17179569.420000] Using static partition definition
Jan 1 00:00:04 SPA112 kern.warning [17179569.424000] !!! do adler32 checksum !!!
Jan 1 00:00:04 SPA112 kern.warning [17179571.288000] File system image checksum OK
Jan 1 00:00:04 SPA112 kern.notice [17179571.292000] Creating 11 MTD partitions on \"gen_nand\":
Jan 1 00:00:04 SPA112 kern.notice [17179571.296000] 0x00000000-0x00060000 : \"u-boot\"
Jan 1 00:00:04 SPA112 kern.notice [17179571.300000] 0x00060000-0x00080000 : \"u-bootenv\"
Jan 1 00:00:04 SPA112 kern.notice [17179571.304000] 0x00080000-0x01460000 : \"ROMIMAGE\"
Jan 1 00:00:04 SPA112 kern.notice [17179571.308000] 0x01460000-0x01b60000 : \"HALFIMAGE\"
Jan 1 00:00:04 SPA112 kern.notice [17179571.316000] 0x001ec000-0x01460000 : \"LINUX_ROOTFS\"
Jan 1 00:00:04 SPA112 kern.notice [17179571.324000] 0x01b60000-0x01d60000 : \"HS_FW\"
Jan 1 00:00:04 SPA112 kern.notice [17179571.328000] 0x01d60000-0x01e60000 : \"FPAR\"
Jan 1 00:00:04 SPA112 kern.notice [17179571.332000] 0x01e60000-0x01ee0000 : \"CISCO\"
Jan 1 00:00:04 SPA112 kern.notice [17179571.340000] 0x01ee0000-0x01f00000 : \"EEPROM\"
Jan 1 00:00:04 SPA112 kern.notice [17179571.344000] 0x01f00000-0x01f80000 : \"NVRAM\"
Jan 1 00:00:04 SPA112 kern.notice [17179571.348000] 0x01f80000-0x02000000 : \"CA_DATA\"
Jan 1 00:00:04 SPA112 kern.info [17179571.356000] clock [spi1] enabled
Jan 1 00:00:04 SPA112 kern.info [17179571.364000] spi-pnx8181 spi-pnx8181: probe succeded
Jan 1 00:00:04 SPA112 kern.info [17179571.368000] i2c /dev entries driver
Jan 1 00:00:04 SPA112 kern.err [17179571.376000] ksz8873 0-005f: failed with status -1
Jan 1 00:00:04 SPA112 kern.warning [17179571.380000] ksz8873: probe of 0-005f failed with error -1
Jan 1 00:00:04 SPA112 kern.warning [17179571.384000] PNX8181 watchdog timer: timer margin 16 sec
Jan 1 00:00:04 SPA112 kern.info [17179571.388000] Registered led device: led1
Jan 1 00:00:04 SPA112 kern.info [17179571.392000] Registered led device: led2
Jan 1 00:00:04 SPA112 kern.debug [17179571.396000] cordless: SCRAM mapped to 0xd0000000
Jan 1 00:00:04 SPA112 kern.info [17179571.396000] cordless: character device initialized (major=254)
Jan 1 00:00:04 SPA112 kern.info [17179571.400000] coma-debug: coma debug support enabled
Jan 1 00:00:04 SPA112 kern.warning [17179571.404000] GACT probability on
Jan 1 00:00:04 SPA112 kern.warning [17179571.408000] Mirror/redirect action on
Jan 1 00:00:04 SPA112 kern.warning [17179571.412000] u32 classifier
Jan 1 00:00:04 SPA112 kern.warning [17179571.412000] Performance counters on
Jan 1 00:00:04 SPA112 kern.warning [17179571.416000] input device check on
Jan 1 00:00:04 SPA112 kern.warning [17179571.420000] Actions configured
Jan 1 00:00:04 SPA112 kern.warning [17179571.424000] Netfilter messages via NETLINK v0.30.
Jan 1 00:00:04 SPA112 kern.warning [17179571.428000] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Jan 1 00:00:04 SPA112 kern.info [17179571.432000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:04 SPA112 kern.warning [17179571.436000] ipt_time loading
Jan 1 00:00:04 SPA112 kern.info [17179571.436000] TCP cubic registered
Jan 1 00:00:04 SPA112 kern.info [17179571.440000] NET: Registered protocol family 17
Jan 1 00:00:04 SPA112 kern.notice [17179571.444000] Bridge firewalling registered
Jan 1 00:00:04 SPA112 kern.info [17179571.448000] Ebtables v2.0 registered
Jan 1 00:00:04 SPA112 kern.info [17179571.456000] RPC: Registered udp transport module.
Jan 1 00:00:04 SPA112 kern.info [17179571.460000] RPC: Registered tcp transport module.
Jan 1 00:00:04 SPA112 kern.info [17179571.464000] 802.1Q VLAN Support v1.8 Ben Greear
Jan 1 00:00:04 SPA112 kern.info [17179571.468000] All bugs added by David S. Miller
Jan 1 00:00:04 SPA112 kern.info [17179571.472000] LINUX_ROOTFS is 4
Jan 1 00:00:04 SPA112 kern.warning [17179571.484000] VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 00:00:04 SPA112 kern.info [17179571.488000] Freeing init memory: 120K
Jan 1 00:00:04 SPA112 kern.info [17179572.356000] eth0: Link down
Jan 1 00:00:04 SPA112 kern.info [17179573.360000] ip3912: eth0 up, speed is 100 Mbps, Full Duplex.
Jan 1 00:00:04 SPA112 kern.info [17179575.796000] coma-config: netlink interface registered
Jan 1 00:00:04 SPA112 kern.info [17179575.844000] coma-cpi: netlink interface registered
Jan 1 00:00:04 SPA112 kern.info [17179575.892000] coma-ss7: netlink interface registered
Jan 1 00:00:04 SPA112 kern.info [17179576.000000] coma-voice: character device initialized (major=253)
Jan 1 00:00:04 SPA112 kern.info [17179576.104000] coma-dsr: netlink interface registered
Jan 1 00:00:04 SPA112 kern.warning [17179576.136000] ***** LED_DRV init *****
Jan 1 00:00:04 SPA112 kern.warning [17179576.140000] ***** LED_DRV end *****
Jan 1 00:00:04 SPA112 kern.warning [17179576.168000] *** sys event driver initialized ***
Jan 1 00:00:04 SPA112 kern.err [17179579.148000] br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
Jan 1 00:00:04 SPA112 kern.info [17179580.800000] device eth0 entered promiscuous mode
Jan 1 00:00:04 SPA112 kern.info [17179580.800000] br0: port 1(eth0) entering learning state
Jan 1 00:00:04 SPA112 kern.debug [17179580.808000] sysevt_comm_sendto: (52, rc)=>
Jan 1 00:00:04 SPA112 kern.debug [17179580.824000] sysevt_comm_sendto: (52, rc)=>
Jan 1 00:00:05 SPA112 kern.info [17179582.800000] br0: topology change detected, propagating
Jan 1 00:00:05 SPA112 kern.info [17179582.800000] br0: port 1(eth0) entering forwarding state
Jan 1 00:00:05 SPA112 daemon.info system[128]: httpd server started at port 80
Jan 1 00:00:05 SPA112 daemon.info dnsmasq[135]: started, version 1.10 cachesize 150
Jan 1 00:00:05 SPA112 daemon.err dnsmasq[135]: failed to load names from /etc/hosts: No such file or directory
Jan 1 00:00:05 SPA112 daemon.debug dnsmasq[135]: reading /tmp/dns_resolv.conf
Jan 1 00:00:05 SPA112 daemon.info dnsmasq[135]: using nameserver 1.1.1.1
Jan 1 00:00:05 SPA112 daemon.notice system[1]: Ethernet WAN br0 link up
Jan 1 00:00:05 SPA112 daemon.notice system[1]: Start WAN br0 DHCP connection
Jan 1 00:00:06 SPA112 kern.debug [17179583.848000] sysevt_comm_sendto: (25, rc)=>
Jan 1 00:00:06 SPA112 kern.debug [17179583.972000] sysevt_comm_sendto: (16, rc)=>
Jan 1 00:00:10 SPA112 kern.debug [17179587.800000] sysevt_comm_sendto: (90, rc)=>
Jan 1 00:00:10 SPA112 daemon.notice system[1]: WAN br0 connected
Jan 1 00:00:10 SPA112 daemon.notice system[1]: Link name=br0
Jan 1 00:00:10 SPA112 daemon.notice system[1]: IP address=192.168.0.189
Jan 1 00:00:10 SPA112 daemon.notice system[1]: Netmask=255.255.255.0
Jan 1 00:00:10 SPA112 daemon.notice system[1]: Gateway=192.168.0.1
Jan 1 00:00:10 SPA112 daemon.notice system[1]: hostname=
Jan 1 00:00:10 SPA112 kern.debug [17179587.836000] sysevt_comm_sendto: (16, rc)=>
Jan 1 00:00:10 SPA112 daemon.notice system[1]: domain=
Jan 1 00:00:10 SPA112 daemon.notice system[1]: dns_0=192.168.0.1
Jan 1 00:00:10 SPA112 kern.debug [17179587.980000] sysevt_comm_sendto: (480, rc)=>
Jan 1 00:00:10 SPA112 kern.debug [17179587.992000] sysevt_comm_sendto: (480, rc)=>
Jan 1 00:00:10 SPA112 kern.debug [17179588.012000] sysevt_comm_sendto: (25, rc)=>
Jan 1 00:00:10 SPA112 daemon.err dnsmasq[135]: failed to load names from /etc/hosts: No such file or directory
Jan 1 00:00:10 SPA112 daemon.debug system[1]: leave reload_dnsmasq_conf_default
Jan 1 00:00:10 SPA112 kern.debug [17179588.672000] sysevt_event_sendto: =>(0, B5817EF8, ledapp)
Jan 1 00:00:10 SPA112 kern.debug [17179588.672000] sysevt_event_sendto: =>type = 1048663
Jan 1 00:00:10 SPA112 kern.debug [17179588.672000] sysevt_event_sendto: =>size = 0
Jan 1 00:00:10 SPA112 kern.debug [17179588.672000] sysevt_comm_sendto: (12, ledapp)=>
Jul 1 11:27:43 SPA112 daemon.notice system[103]: NTP update successfully, Year:2013,Month:7,Day:1,Hour:11,Min:27,Sec:43
Jul 1 11:27:43 SPA112 syslog.notice syslog-ng[121]: STATS: dropped 0
Jul 1 12:27:43 SPA112 syslog.notice syslog-ng[121]: STATS: dropped 0
Jul 1 12:27:43 SPA112 daemon.notice system[103]: Adjust daylight saving time: Year:2013,Month:7,Day:1,Hour:12,Min:27,Sec:43
Jul 1 12:28:13 SPA112 kern.info [17179619.524000] cordless: loading synergy-2012-11-05
Jul 1 12:28:13 SPA112 kern.info [17179619.552000] cordless: init successful
Jul 1 12:28:15 SPA112 user.notice msgswitchd: MSGSWITCH fd_rtp fifo created 7
Jul 1 12:28:15 SPA112 user.notice msgswitchd: MSGSWITCH fd_ch fifo created 9
Jul 1 12:28:15 SPA112 user.notice msgswitchd: MSGSWITCH fd_gmep fifo created 10 -
In my ipad zoom function not working..some day before it worked,but when i double pinch with my three fingers it zooms negligible, wat to do?plzz help me..
It works when I reset my all settings...
Settings>general>reset>reset all settings
It never delete ur all contacts and any others,but ur wallpaper and wifi connection will change..it can be as before... -
Help viewer does not work after update to 10.4.4
Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!
Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks
-
Why is the scroll function not working after accessing the voice feature in settings?
Why is the scroll function not working after accessing the voice feature in settings?
For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed: -
Palm Desktop 6.2.2. and Lookup function not working in Windows 7
Palm Desktop's lookup function not working in Windows 7 64bit. Please help.
Post relates to: Centro (Verizon)
This question was solved.
View Solution.I was able to solve this by unchecking compatibility mode and setting the application to run as administrative.
-
Send & Recieve functionality not working with WebDav after installing Acrobat XI
Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).
Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra -
PLz help 7key is not working suddenli in my N-73
PLz help 7key is not working suddenli in my N-73 and the 7 is simply displaying on the screen help plz....
BirlaOk.
It sounds as if something is keeping the key pressed, and that can be down to 2 reasons.
The phone has got wet and the internal key is corroded and fused, making a constant connection
or
Dust or dirt in under that key and are having the same affect
Either one of these reasons will need to be fixed at a Nokia Care Point as it will involve taking the phone apart.
You can find the nearest NCP to you at the Store Locator
Use the drop down list on the right to find your country.
If it is either of these faults, the NCP will probably charge you as it wont be a warranty fault, but a customer created fault.
Hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left. -
HT204168 touch screen function not working when using facetime
Why is my iPad touch screen function not working when using FaceTime?
Hi megascones,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Regards,
- Brenden -
Why is my touch screen function not working when using facetime
Why is my touch screen function not working when using facetime
Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario
Maybe you are looking for
-
Created a simple page with a few text inputs and 4 LOV. After selecting a value from the last LOV the following error is displayed: Error: You are trying to access a page that is no longer active. - The referring page may have come from a previous se
-
How to use loop functionality in XI
Hi, I am working with Idoc to file scenario. And my requirement in some of the fields are as follow. IF E1IDB02 BA-FIIKWAER = CNY then MID(E1EDKA1 BE-NAME1,12,11) IF E1IDB02 BA-FIIKWAER <> CNY and LEN(E1EDKA1 BE-NAME1)<=35 then MID(E1EDKA1 B
-
'Print one copy' is OK, print from dialogue fails
Using MacBook pro with 10.8.2 and CS6 13.0.1, with Kodak 2170 printer. I can select "Print one copy" from the file menu, and the file is sent to the printer and prints fine. But if I select "Print", it brings up the usual Print dialogue window, and s
-
Client wanted to delete the document created with the wrong GL with the WBS
Dear All, The user had by mistake posted the the document in a wrong GL with with WBS element under the Project. We have tried to reverse it through a reversal posting. But it could not be done. Client wanted to delete the document created with the w
-
[Solved]500 Internal Server Error- when open dialog page for LOV
Hello I have developed JSF / ADF Bc application and my form has inputselect component and everything works fine in embeded OC4J, but when i deploy the application to apps server i get below error when i launch the dialog page to select a value 500 In