Need help to change the size of the Tablespaces.

Hi DBA's
Kindly help me on bellow tablespaces, which are the tablespaces need to increase the size in my R12.1.1 Instance? what size should i increase?
TABLESPACE_NAME SIZEMB FREEMB
APPS_TS_QUEUES 1000 894.88
CTXD 19 1.79
OWAPUB 10 9.92
APPS_UNDOTS1 1802 4
APPS_TS_NOLOGGING 64 25.63
APPS_TS_ARCHIVE 866 367.25
APPS_TS_TOOLS 500 499.88
APPS_TS_TX_IDX 7736.75 722.63
XXKGI 100 99
APPS_TS_SEED 2982 388.5
SYSTEM 12012.1328 1169.96
APPS_TS_INTERFACE 1041 253.63
ODM 11 1.44
PORTAL 100 99.53
APPS_TS_TX_DATA 5680.125 512.63
OLAP 17.2421875 1.75
APPS_TS_SUMMARY 1146 253.25
APPS_TS_MEDIA 1446 276.88
SYSAUX 472.6875
Regards,
SG

SG,
Kindly help me on bellow tablespaces, which are the tablespaces need to increase the size in my R12.1.1 Instance? what size should i increase?You are the best one to tell which tablespaces need to be increased (based on your monitoring to the datafile growth). I always keep 30%-40% free space in the tablespaces and get an alert when the used space go beyond that limit.
Another option is to enable AUTOEXTEND so you do not have to worry (assuming you have enough space at the OS level).
How To Check For Autoextensible Datafiles Set To Maxsize Unlimited [ID 468096.1]
How to Determine if a Datafile has AUTOEXTEND ENABLED [ID 1023280.6]
Thanks,
Hussein

Similar Messages

Need help with changing text size

Hi everyone,
I would like to allow users to easily change the text size of
a website I am designing.
To see an examplme, go to the Dell website (www.dell.com), on
the bottom left there is a link to enlarge the text (or bring it
back to normal size).
Is this something that I can do through dreamweaver, or maybe
CSS?
Thanks in advance for your help!
Jose

This article may be of some use:
http://www.alistapart.com/articles/alternate/
Nadia
Adobe® Community Expert : Dreamweaver
~~ CSS Templates |Tutorials |SEO Articles ~~
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
> I would like to allow users to easily change the text
size of a website I
> am
> designing.
>
> To see an examplme, go to the Dell website
(www.dell.com), on the bottom
> left
> there is a link to enlarge the text (or bring it back to
normal size).
>
> Is this something that I can do through dreamweaver, or
maybe CSS?
>
> Thanks in advance for your help!
>
> Jose
>

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
1. Open Photoshop.
2. Select Preferences from the Edit Menu, then select General.
3. Change the HUD Color Picker to Hue Strip (Medium).
4. Select Interface from the Preferences menu on the left side of the dialog box.
5. Change the UI Font Size to Large in the Text area of the Preferences dialog box.
6. Select Experimental Features from the Preferences menu on the left side of the dialog box.
7. Select Scale UI 200% for high-density displays (Windows only).
8. Click on OK, then Exit/Quit Photoshop.
9. Open Photoshop and everything should be readable.

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

Need help in changing the langauge on the Nokia570...

Anybody can help please. I was given a brand new Nokia 5700 by my nephew from Taiwan and the langauge set is Chinese. I do not read or write chinese. Need help to change thelangauge on the phone. Any body can help.
Thanks in advance

Friend, I am based in China and my secretary is chinese - but nobody can figure out how to do it. I have another engineer who has the same phone has been playing around with it for 2 days and cannot get it done also. That is the reason I am getting on this site for help.
Thanks anyways

I need help writing a script that finds the first instance of a paragraph style and then changes it

I need help writing a script that finds the first instance of a paragraph style and then changes it to another paragraph style. I don't necessarily need someone to write the whole thing, by biggest problem is figuring how to find just the first instance of the paragraph style. Any help would be greatly appreciated, thanks!

Hi,
Do you mean first instance of the paragraph style
- in a chosen story;
- on some chosen page in every text frames, looking from its top to the bottom;
- in a entire document, looking from its beginning to the end, including hidden layers, master pages, footnotes etc...?
If story...
You could set app.findTextPreferences.appliedParagraphStyle to your "Style".
Story.findText() gives an array of matches. 1st array's element is a 1st occurence.
so:
Story.findText()[0].appliedParagraphStyle = Style_1;
//==> this will change a paraStyle of 1st occurence of story to "Style_1".
If other cases...
You would need to be more accurate.
rgds

HT1212 I cannot remember my passcode and need help to change/reset my passcode. I need this information in simple terms. I have attempted to follow the instructions above without success

I cannot remember my passcode and need help to change/reset my passcode. I have tried to reset using the instructions on the website without success. Please explain to me in simple easy terms how to access my ipod. Thanks

Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You can also Google for YouTube videos that show how to do it

I need help with changing my verizon vm to the system voicemail

I need help with changing my verizon vm to the system voicemail

Deleting the iTunes account is not the solution as you will very likely lose any and all purchases ever made with the account.
If you cannot find the option on the site, contact iTunes support.

I have forgotten my security question answers, i have tried to reset them but it keeps saying i need to save changes before i leave the page, i try to but it does nothing. help?

i have forgotten my security question answers, i have tried to reset them but it keeps saying i need to save changes before i leave the page, i try to but it does nothing. help?

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

I need to change the size of the view for easier reading. Is there a way to make the page view larger without affecting the form?

Hi Guys, good product beginning however it's not as good as many of the other Adobe product's workspaces. I cannot change the size of the view during form design work, so it's a visual strain to work in Forms Central. Is there a way to modify the view (not affecting the width, size or font when presented on website or on paper)?

In Photoshop CC 2014 (Windows only) it is possible to use a setting of 200% to scale the UI. On some monitors it improves readability and on others it cuts part of the application screen. To give it a try go to:
Edit >> Preferences >> Experimental Features
Put a check-mark in the box and click OK
Then close PS and re-start for the change to take effect.

How to change the size of the caret in a JTextPane

I have text of different font sizes and the default caret height is the height of the text with the maximum font size. How do I change the caret height so that it matches the height of the text with the specified font size ?

This has been a real pain in the butt to figure out, but I think I finally got it. If you create your own caret (subclass of DefaultCaret) then you override its paint() and damage() methods. I was having all kinds of problems with this though. I was getting pieces of carets left behind when I moved with the arrow keys, etc... from the helps I found. The arrow keys were my big problem.
I think I finally figured out that the damage() simply does need to specify an area a little bigger than the old caret so it can blank it out. Then I think others had a logic problem, and Sun does not make this problem clear. What happens it that I think repaint() calls paint() who then uses the bigger x, y, height and width parameters that got set in damage(), which was causing my problems because the damage size was bigger than the size I wanted to create my caret with. What I do is figure out my area from the font I am using (another trick) and make them (the charWd and charHt) variables class variables. I calculate them in damage, use a bigger area to blank out my old caret in damage, and then used the correct caret size I calculated in damage() in paint(), instead of the rectangle values that seem to get passed from damage() to paint(). That was the problem in other examples.
Here is my code:
run with java caretPain
run with java caretPain -1 to see my fixed version
run with java caretPain -2 to see some problems
// written by: Stan Towianski
import java.awt.*;
import java.awt.event.*;
import java.util.Hashtable;
import java.util.ArrayList;
import javax.swing.*;
import javax.swing.text.*;
import javax.swing.event.*;
import javax.swing.undo.*;
import javax.swing.plaf.basic.*;
import javax.swing.text.*;
import javax.swing.plaf.*;
import java.net.URL;
import java.io.*;
import java.beans.*;
public class caretPain extends JFrame {
static caretPain CRTP2;
JPanel contentPane;
JTextPane textPane;
JTextPane textPane2;
JScrollPane scrollPane;
JSplitPane splitPane;
String newline = "\n";
static final int MAX_CHARACTERS = 300100;
static int FrameWidth = 500;
static int FrameHeight = 300;
String caretType = "blockOutline";
static int useSpecialCaret = 0;
DefaultCaret useCaret = new MyCaret();
public caretPain() {
textPane = new JTextPane( new DefaultStyledDocument() );
textPane2 = new JTextPane( new DefaultStyledDocument() );
if ( useSpecialCaret == 1 )
System.out.println( "using special caret 1" );
textPane.setCaret( useCaret );
else if ( useSpecialCaret == 2 )
System.out.println( "using special caret 2" );
textPane.setCaret( new WsCaret() );
textPane.setCaretPosition(0);
textPane.setMargin(new Insets(5,5,5,5));
scrollPane = new JScrollPane(textPane);
textPane.setPreferredSize(new Dimension(FrameWidth, FrameHeight));
JScrollPane scrollPane = new JScrollPane(textPane);
//Create a split pane for the change log and the text area.
splitPane = new JSplitPane( JSplitPane.HORIZONTAL_SPLIT,
textPane, textPane2 );
splitPane.setOneTouchExpandable(true);
//Add the components to the frame.
contentPane = new JPanel(new BorderLayout());
contentPane.add(splitPane, BorderLayout.CENTER);
setContentPane(contentPane);
class MyCaret extends DefaultCaret
int charWd = 30;
int charHt = 30;
// draw the caret
public void paint(Graphics g)
System.err.println( "entered MyCaret.paint()" );
if ( ! isVisible() )
System.err.println( "exiting because not visible" );
return;
try {
JTextComponent c = getComponent();
int dot = getDot();
Rectangle r = c.modelToView(dot);
System.err.println("caret: text position: " + dot +
", view location = [" +
r.x + ", " + r.y + "]" +
newline);
g.setColor(c.getCaretColor());
//g.drawLine(r.x, r.y + r.height - 1, r.x + 14, r.y + r.height - 1);
System.err.println( "caretType =" + caretType ); //+ " component =" + c.toString() );
if ( caretType.equals( "blockOutline" ) )
g.drawRect( r.x, r.y, charWd, charHt );
else if ( caretType.equals( "block" ) )
g.fillRect( r.x, r.y, charWd, charHt );
else if ( caretType.equals( "bar" ) )
g.drawLine( r.x, r.y, r.x, r.y + charHt );
catch (BadLocationException e) {
System.err.println( "bad caret loc" + e);
// specify the size of the caret for redrawing
// and do repaint() -- this is called when the
// caret moves
//protected synchronized void damage(Rectangle r)
public synchronized void damage(Rectangle r)
System.err.println( "entered MyCaret.damage()" );
System.err.println("caret.damage(): text position: " + getDot() +
", view location = [" +
r.x + ", " + r.y + "]" +
newline);
//FontMetrics fm = g.getFontMetrics();
//System.out.println( "textPane getfont =" + textPane.getFont() );
//System.out.println( "\n\n read in attribs font size =" + textPane.getInputAttributes().getAttribute(StyleConstants.FontSize) + "\n\n" );
//int ii = Integer.parseInt( (String) textPane.getInputAttributes().getAttribute( StyleConstants.FontSize ) );
int ii = Integer.parseInt( String.valueOf( textPane.getInputAttributes().getAttribute( StyleConstants.FontSize ) ) );
//System.out.println( "textPane input attrib font size =" + ii );
Font f = new Font( "ff", Font.PLAIN, ii );
//System.out.println( "textPane input attrib font =" + f );
FontMetrics fm = getFontMetrics( f );
//FontMetrics fm = g.getFontMetrics();
//FontMetrics fm = getFontMetrics( textPane.getInputAttributes().getAttribute( StyleConstants.FontSize ) );
//MutableAttributeSet inputAttributes = getInputAttributes();
//String fs = textPane.getAttribute( "FontSize" );
//System.out.println( "\n\n read font size =" + textPane.getCharacterAttributes().getAttribute(StyleConstants.FontSize) + "\n\n" );
charWd = fm.charWidth( 'k' );
charHt= fm.getHeight();
//System.out.println( "font width =" + charWd + " font height =" + charHt + " font =" + fm.toString());
if ( r == null )
System.err.println( "caret.damage() return on rectangle == null" );
return;
x = r.x - 2;
y = r.y - 2; // + r.height - 2;
width = charWd + 4; //textPane.getColumnWidth();
height = charHt + 4; //textPane.getRowHeight();
System.err.println("caret.damage(): set caret width, height, x, y =" + width + "," + height + "," + x + "," + y );
repaint();
//repaint();
public class WsCaret extends DefaultCaret {
transient private int[] flagXPoints = new int[3];
transient private int[] flagYPoints = new int[3];
public WsCaret() {
this.setBlinkRate(500);
public void paint(Graphics g) {
if(isVisible()) {
JTextComponent component = this.getComponent();
TextUI mapper = component.getUI();
Rectangle r = null;
try {
r = mapper.modelToView(component, this.getDot());
catch(BadLocationException exc) {}
//System.out.println( "rect r =" + r.toString() );
//g.drawLine(r.x, r.y, r.x, r.y + r.height - 1);
//g.drawLine(r.x+1, r.y, r.x+1, r.y + r.height - 1);
g.drawRect( r.x, r.y, 10, r.height );
Document doc = component.getDocument();
if (doc instanceof AbstractDocument) {
Element bidi = ((AbstractDocument)doc).getBidiRootElement();
if ((bidi != null) && (bidi.getElementCount() > 1)) {
// there are multiple directions present.
flagXPoints[0] = r.x;
flagYPoints[0] = r.y;
flagXPoints[1] = r.x;
flagYPoints[1] = r.y + 4;
flagYPoints[2] = r.y;
flagXPoints[2] = (true) ? r.x + 5 : r.x - 4;
System.out.println( "going g.fillPolygon" );
g.fillPolygon(flagXPoints, flagYPoints, 3);
protected synchronized void damage(Rectangle r) {
if (r != null) {
this.x = r.x - 4;
this.y = r.y;
//there must be a better way to doing this, but for now you
//just increase the width so that it will cover the new caret's size
this.width = 20; // the original width is 10
this.height = r.height;
//this.height = r.height + 20;
//this.height = 10;
repaint();
//The standard main method.
public static void main(String[] args) {
if ( args.length > 0 )
System.out.println( "found arg so will use special caret." );
if ( args[0].equals( "-1" ) )
useSpecialCaret = 1;
else if ( args[0].equals( "-2" ) )
useSpecialCaret = 2;
else
System.out.println( "found no arg so will standard caret." );
System.out.println( "give arg: -1 to get Stan\'s working caret" );
System.out.println( "give arg: -2 to get another example\'s caret" );
try
CRTP2 = new caretPain();
catch (Exception ex)
System.out.println("Error creating CRTP2: " + ex);
ex.printStackTrace();
System.exit(0);
CRTP2.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
public void windowActivated(WindowEvent e) {
CRTP2.textPane.requestFocus();
CRTP2.setTitle( "This is my title you" );
CRTP2.pack();
CRTP2.setVisible(true);

How to change the size of the scrollbar in JScrollPane?

I set a jtable in the jscrollpane,but the table is very small,so I want to change the size of the scrollbar in the jscrollpane.How can i do?Please help me,Thanks.

Dropping and re-creating the table is by far the best way (of course you need to unload the table's data to a flat file with ttBulkCp first and then reload it again afterwards).
a second option is to drop the column and re-add it with the new size but you still need to preserve the data first and put it back afterwards and this is harder for a single column than for a whole table. Also, if you are using replication you should exercise care when using ALTER TABLE to ensure iall replicated copies of the table maintain the same physical structure.
Chris

What is happening when I change the size of the image in the program sequence window?

I noticed that I can change the image size of my exported file. I imported a 720 x 480 DV file into CS5.5. I went to my program sequence window and changed the settings to show the smallest image in that window. I then clicked on the image and used the handles that appear to make that small image large enough to nearly fill the screen. When I exported my final file and played the resulting WMV, the image on my screen was nearly twice as large as it would have been if I had not previously altered the image size in the program sequence window. I had to do this alteration for each clip in my timeline, or the unaltered ones would stay at the smaller size. The quality did not seem to be significantly impaired. I learned about this on a youtube video. The person who did the video claimed that this was a simple and quick way to upgrade standard video to HD. Of course this is not true. He was only changing the size of the resulting video. Does anyone know what is really happing when you do this procedure and why it changes the size of the exported video?

The size (resolution) of the exported video is not affected by anything you do while editing. It is dependant solely on the resolution set in the export settings.
Ideally you want to edit in an sequence that matches your media\, which will be the same size or larger than the required export. In other words, the same or smaller is OK. Making things bigger in post is not the best option. If you need things bigger, shoot them bigger.

How to change the size of the titel of a picture in a diashow

please answer the question.
how to change the size and the possition of the titel of a picture in a diashow

You need to select it. Copy that selection to a new layer, and use Free Transform to resize it.
http://www.youtube.com/watch?v=qWpAGmwhllQ
http://www.youtube.com/watch?v=Bi4jJnYLkUA

How do I change the size of the location bar in firefox 18?

I want to make the location bar much smaller and the search bar much bigger (I still want them to use the entire width of the toolbar). I read elsewhere in the forums that you can change the size of the bar by going to CUSTOMIZE and once the cursor changes to a re-size cursor, simply click and drag. However, that only worked for me with previous versions of Firefox. Since I've had to upgrade, the cursor remains a hand and never changes to the re-size arrow.

No, you do not have to go to customize mode.<br />
You need to do this in normal mode and place the mouse pointer between the two bars.

How do you change the size of the font in the menu bar running Maverick?

On Maverick, how do you change the size of the menu bar font?

Sent my feedback already:
Thank you for your feedback on the MacBook Pro.
We cannot respond to you personally, but please know that your message has been received and will be reviewed by the MacBook Pro Team. If we need to follow up with you on your ideas for improving the MacBook Pro, we will contact you directly.
We appreciate your assistance in making the MacBook Pro a great computer.
MacBook Pro Team
Apple

Need help to change the size of the Tablespaces.

Similar Messages

Maybe you are looking for