Need help to check prerequisites for Document migration to SharePoint

Hi All,
I would like to confirm the required prerequisites which I need to follow before migrating contents to SharePoint online so that, I can analysis everything and ensure my job without any interruption.
Any suggestions/recommendations are highly appreciated.

Hi Jyotirmoy Deb,
Last time might be,you are the one that asking about using join statement on 3 tables.
Now what are you doing in your code. use are joining almost 18 tables.this will not work anyone, and it will slow down the processing time of the report.
First of all analysis the report what exactly you want and then
first read the header data as in your case you using the Sale Document Header data.
On the basis of Header data fetch the line item data.
Don't processes all the tables at a time using the join clause.Because it decrease the efficiency of the program.
Reward points,if useful.
Regards,
Manoj Kumar

Similar Messages

Need help figuring out permissions for a migration project

Hi all
We are in the middle of a migration from various Exchange environments over to a hybrid Exchange 2010 and Office 365 environment. Recently we had to change the setup for migrating mailboxes from on-premise to on-premise using Quest Migration Manager for
Exchange using legacy agents.
Dell documentation says to use the below command in order to give access for the agent to open and import mails from a PST into the target mailbox. But it does not work and only after setting the number 2 command will it work. I cant work out what I need
to do on the database so that I do not need to add permissions manually to all new mailboxes.
Help is greatly appreciated.
Dell:
Get-MailboxDatabase | Add-ADPermission -User <User> -AccessRights GenericAll -ExtendedRights send-as, Receive-As
also at the very beginning I was given this:
Get-Mailbox | Add-MailboxPermission -user Domain\Service Account -AccessRights FullAccess - InheritanceType All
But I cant give every single mailbox this permission. not an option with 20.000+ mailboxes on a global environment.
What fixes the issue:
Add-MailboxPermission -Identity "user" -User "EUECS\euqmmservice" -AccessRights Fullaccess -InheritanceType all
If only i had a cool signature!! ;)

You want to assign rights to that account for all mailboxes in a particular database? Try this (where the database is MB01).
Get-Mailbox -Database MB01 | Add-MailboxPermission -User "EUECS\euqmmservice -AccessRights FullAccess
When you're done you can revoke the rights with the Remove-MailboxPermission cmdlet.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Hi! I am newbie to Reports need help with check boxes

Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!

and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine.

Need help in developing BADI for IT0001

Hi All,
I need help in developing BADI for IT0001.
On IT0001 create or change, there is need to update IT0017 with following data from IT0001
-Company Code
-Cost center
-Business Area
-Begin and End Date.
Other fields from IT0017 need to be derived from Position and update in IT0017.
Please guide me how I can address this. I do not want to go for dynamic action, as it is not getting evoked during background jobs.
I am new to BADI development and will appreciate step by step instructions.
Thanks

Hi,
     follow the below steps to achive
Steps:
1.     Execute Business Add-In(BADI) transaction SE18
2.     Enter BADI name i.e. HRPAD00INFTY and press the display
        button
3.     Select menu option Implementation->Create
4.     Give implementation a name such as Z_HRPAD00INFTY
5.      You can now make any changes you require to the BADI within this
        implementation, for example choose the Interface tab there are 3 methods avialble
6.     Double click on the method you want to change, you can now enter
        any code you require.
7.      Please note to find out what import and export parameters a
        method has got return the original BADI definition
        (i.e. HRPAD00INFTY) and double click on the method name
        for example within HRPAD00INFTY contract is a method
8.      When changes have been made activate the implementation
<b>Reward points</b>
Regards

I need help scrolling and highlighting for a vast amount of pics that I'm trying to transfer. I have a macbook pro osx 10.5.8

I need help scrolling and highlighting for a vast amount of pics that I'm trying to transfer. I have a macbook pro osx 10.5.8

I need help scrolling and highlighting for a vast amount of pics that I'm trying to transfer. I have a macbook pro osx 10.5.8

I still need help with the Dictionary for my Nokia...

I still need help with the Dictionary for my Nokia 6680...
Here's the error message I get when trying to open dictionary...
"Dictionary word information missing. Install word database."
Can someone please provide me a link the where I could download this dictionary for free?
Thanks!
DON'T HIT KIDS... THEY HAVE GUNS NOW.

oops, im sorry, i didnt realised i've already submitted it
DON'T HIT KIDS... THEY HAVE GUNS NOW.

Planning for Document Migration

Hi,
i Need to do some planning for the last Shared Drives at a client that needs to be migrated to SharePoint.
The Document Library limit in SP2010 is 30 000 documents per library.
i Have got 290 881 Word documents that needs to be uploaded. In total with other file types it is 1.34milj files.
Size is about 1.4Tb in total.
This will go to different Site Collections in different Databases but i must still get more detail on how much per what site.
How can i check if the hardware is going to be up for that numbers? Space i will have to plan but i guess the 128Gb ram on SQL might need to be upgraded if the server can take more.
Also how does each Metadata field affect the performance?
Maybe a dedicated Search server or is that not needed?
Current Farm:
SQL Cluster
2 x WFE
1 x App Server
1 x BI Server
Thanks for any tips and advice in advance.

The first question I'd ask is, do they have to be moved. Your client will end up paying a lot more for storage and SQL overhead for moving all that stuff into the database. It's an even more pointless exercise if the content is hardly accessed.
I'd encourage two things: -
Look at some sort of base level audit, see if that can be cut down a bit
Think about using a federated search to surface that content in the search results. This might be more effective than just moving it.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Need help with calculator project for an assignment...

Hi all, I please need help with my calculator project that I have to do for an assignment.
Here is the project's specifications that I need to do"
"""Create a console calculator applicaion that:
* Takes one command line argument: your name and surname. When the
program starts, display the date and time with a welcome message for the
user.
* Display all the available options to the user. Your calculator must include
the arithmetic operations as well as at least five scientific operations of the
Math class.
-Your program must also have the ability to round a number and
truncate it.
-When you multiply by 2, you should not use the '*' operator to perform the
operation.
-Your program must also be able to reverse the sign of a number.
* Include sufficient error checking in your program to ensure that the user
only enters valid input. Make use of the String; Character, and other
wrapper classes to help you.
* Your program must be able to do conversions between decimal, octal and
hex numbers.
* Make use of a menu. You should give the user the option to end the
program when entering a certain option.
* When the program exits, display a message for the user, stating the
current time, and calculate and display how long the user used your
program.
* Make use of helper classes where possible.
* Use the SDK to run your program."""
When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
Here is the programs code that I've written so far:
{code}
import java.io.*;
import java.util.*;
import java.text.*;
public class Project {
     private static String nameSurname = "";
     private static String num1 = null;
     private static String num2 = null;
     private static String choice1 = null;
     private static double answer = 0;
     private static String more;
     public double Add() {
          answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
          return answer;
     public double Subtract() {
          answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
          return answer;
     public double Multiply() {
          answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
          return answer;
     public double Divide() {
          answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
          return answer;
     public double Modulus() {
          answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
          return answer;
     public double maximumValue() {
          answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
          return answer;
     public double minimumValue() {
          answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
          return answer;
     public double absoluteNumber1() {
          answer = (Math.abs(Double.parseDouble(num1)));
          return answer;
     public double absoluteNumber2() {
          answer = (Math.abs(Double.parseDouble(num2)));
          return answer;
     public double Squareroot1() {
          answer = (Math.sqrt(Double.parseDouble(num1)));
          return answer;
     public double Squareroot2() {
          answer = (Math.sqrt(Double.parseDouble(num2)));
          return answer;
     public static String octalEquivalent1() {
          int iNum1 = Integer.parseInt(num1);
String octal1 = Integer.toOctalString(iNum1);
return octal1;
     public static String octalEquivalent2() {
          int iNum2 = Integer.parseInt(num2);
          String octal2 = Integer.toOctalString(iNum2);
          return octal2;
     public static String hexadecimalEquivalent1() {
          int iNum1 = Integer.parseInt(num1);
          String hex1 = Integer.toHexString(iNum1);
          return hex1;
     public static String hexadecimalEquivalent2() {
          int iNum2 = Integer.parseInt(num2);
          String hex2 = Integer.toHexString(iNum2);
          return hex2;
     public double Round1() {
          answer = Math.round(Double.parseDouble(num1));
          return answer;
     public double Round2() {
          answer = Math.round(Double.parseDouble(num2));
          return answer;
          SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
     Date now = new Date();
     SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
     static Date timeIn = new Date();
     public static long programRuntime() {
          Date timeInD = timeIn;
          long timeOutD = System.currentTimeMillis();
          long msec = timeOutD - timeInD.getTime();
          float timeHours = msec / 1000;
               return (long) timeHours;
     DecimalFormat decimals = new DecimalFormat("#0.00");
     public String insertNameAndSurname() throws IOException{
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    while (nameSurname == null || nameSurname.length() == 0) {
                         for (int i = 0; i < nameSurname.length(); i++) {
                         if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
                                   inputCorrect = true;
                    else{
                    inputCorrect = false;
                    break;
                    try {
                         BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("Please enter your name and surname: ");
                         nameSurname = inStream.readLine();
                         inputCorrect = true;
                    }catch (IOException ex) {
                         System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
                         inputCorrect = false;
                    System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
                    System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
                    return nameSurname;
          public String inputNumber1() throws IOException {
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
                         num1 = br.readLine();
                         double number1 = Double.parseDouble(num1);
                         System.out.println("\nThe number you have entered is: " + number1);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
                         inputCorrect = false;
                    return num1;
     public String calculatorChoice() throws IOException {
          System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
          System.out.println("\n*********************************************");
          System.out.println("---------------------------------------------");
          System.out.println("Please select an option from the list below: ");
          System.out.println("---------------------------------------------");
          System.out.println("1 - Add");
          System.out.println("2 - Subtract");
          System.out.println("3 - Multiply");
          System.out.println("4 - Divide (remainder included)");
          System.out.println("5 - Maximum and minimum value of two numbers");
          System.out.println("6 - Squareroot");
          System.out.println("7 - Absolute value of numbers");
          System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
          System.out.println("9 - Round numbers");
          System.out.println("0 - Exit program");
          System.out.println("**********************************************");
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("Please enter your option and hit <ENTER>: ");
                         choice1 = inStream.readLine();
                         int c1 = Integer.parseInt(choice1);
                         System.out.println("\nYou have entered choice number: " + c1);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
                         inputCorrect = false;
                    return choice1;
     public String inputNumber2() throws IOException {
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
                         num2 = br2.readLine();
                         double n2 = Double.parseDouble(num2);
                         System.out.println("\nThe second number you have entered is: " + n2);
                         System.out.println("\nYour numbers are: " + num1 + " and " + num2);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
                         inputCorrect = false;
                    return num2;
     public int Calculator() {
          int choice2 = (int) Double.parseDouble(choice1);
          switch (choice2) {
                    case 1 :
                         Add();
                         System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 2 :
                         Subtract();
                         System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 3 :
                         Multiply();
                         System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 4 :
                         Divide();
                         System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
                         Modulus();
                         System.out.print(" and the remainder is " + decimals.format(answer));
                         break;
                    case 5 :
                         maximumValue();
                         System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
                         minimumValue();
                         System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 6 :
                         Squareroot1();
                         System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
                         Squareroot2();
                         System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 7 :
                         absoluteNumber1();
                         System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
                         absoluteNumber2();
                         System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 8 :
                         octalEquivalent1();
                         System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
                         octalEquivalent2();
                         System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
                         hexadecimalEquivalent1();
                         System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
                         hexadecimalEquivalent2();
                         System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
                         break;
                    case 9 :
                         Round1();
                         System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
                         Round2();
                         System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 0 :
                         if (choice2 == 0) {
                              System.exit(1);
                         break;
               return choice2;
          public String anotherCalculation() throws IOException {
               boolean inputCorrect = false;
               while (inputCorrect == false) {
                         try {
                              BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
                              System.out.print("\nWould you like to do another calculation? Y/N ");
                              more = br3.readLine();
                              String s1 = "y";
                              String s2 = "Y";
                              if (more.equals(s1) || more.equals(s2)) {
                                   inputCorrect = true;
                                   while (inputCorrect = true){
                                        inputNumber1();
                                        System.out.println("");
                                        calculatorChoice();
                                        System.out.println("");
                                        inputNumber2();
                                        System.out.println("");
                                        Calculator();
                                        System.out.println("");
                                        anotherCalculation();
                                        System.out.println("");
                                        inputCorrect = true;
                              } else {
                                   System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
                                   System.out.println("the program will now exit, Goodbye.");
                                   System.exit(0);
                         } catch (IOException ex){
                              System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
                              inputCorrect = false;
          return more;
     public static void main(String[] args) throws IOException {
          Project p1 = new Project();
          p1.insertNameAndSurname();
          System.out.println("");
          p1.inputNumber1();
          System.out.println("");
          p1.calculatorChoice();
          System.out.println("");
          p1.inputNumber2();
          System.out.println("");
          p1.Calculator();
               System.out.println("");
               p1.anotherCalculation();
               System.out.println("");
{code}
*Can you please run my code for yourself and have a look at how this program is constructed*
*and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
Your help will be much appreciated.
Thanks in advance

Smirre wrote:
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
AND you might want to ask yourself why the heck a calculator needs to know the users Name.

Need help to check my code !

I am not ble to fetch all the data .
Where is the problem !
please help me to modify the select statement
REPORT YINTERACTIVEPROGRAM01.
*CREATED BY:JYOTIRMOY DEB                                            *
*DATE OF CREATION :                                                  *
*TABLE DECLARATION
TABLES:VBAK, "Sales Document: Header Data
       VBKD, "Sales Document: Business Data
       VBPA, "Sales Document: Partner
       VBAP, "Sales Document: Item Data
       ADRC, "Addresses (central address admin.)
       T178T, "Conditions: Groups for Materials:text
       T188T, "Pricing groups for customers
       TVM1,
       TVM1T, "Material pricing group 1: Description
       TVM2,
       TVM2T, "Material Pricing Group 2: Description
       TVM3,
       TVM3T, "Material Pricing Group 3: Description
       TVM4,
       TVM4T, "Material Pricing Group 4: Description
       TVM5,
       TVM5T, "Material Pricing Group 5: Description
       SZA1_D0100,
       TVLV ,   "Check table for release orders: Usage ID
       TVLVT,
       TVKGG,   "Customer Condition Groups (Customer Master)
       TVKGGT,
       TPAR,   "Business Partner: Functions
       TPART,
       TVAUT. "Sales Documents: Order Reasons: Texts
*SELECT OPTIONS
Select-options S_VBELN for vbak-vbeln.
*CREATING INTERNAL TABLES
TYPES:BEGIN OF TY_TAB,
         VBELN LIKE VBAK-VBELN,
         VKORG LIKE VBAK-VKORG,
         ERDAT LIKE VBAK-ERDAT,
         AUGRU LIKE VBAK-AUGRU,
         BEZEI LIKE TVAUT-BEZEI,
         BSTDK LIKE VBKD-BSTDK,
         BSTDK_E LIKE VBKD-BSTDK_E,
         BSTKD LIKE VBKD-BSTKD,
         KDKG2 LIKE VBKD-KDKG2,
         KONDA LIKE VBKD-KONDA,
         MATNR LIKE VBAP-MATNR,
         SPART LIKE VBAP-SPART,
         KONDM LIKE VBAP-KONDM,
         WAERK LIKE VBAP-WAERK,
         NETWR LIKE VBAP-NETWR,
         KWMENG LIKE VBAP-KWMENG,
         VKAUS LIKE VBAP-VKAUS,
         MVGR1 LIKE VBAP-MVGR1,
         MVGR2 LIKE VBAP-MVGR2,
         MVGR3 LIKE VBAP-MVGR3,
         MVGR4 LIKE VBAP-MVGR4,
         MVGR5 LIKE VBAP-MVGR5,
         KUNNR LIKE VBPA-KUNNR,
         POSTCODE1 LIKE ADRC-POST_CODE1,
         POBOX LIKE ADRC-PO_BOX,
         NAME1 LIKE ADRC-NAME1,
         NAME2 LIKE ADRC-NAME2,
         CITY1 LIKE ADRC-CITY1,
         CITY2 LIKE ADRC-CITY2,
         COUNTRY LIKE ADRC-COUNTRY,
         STREET LIKE ADRC-STREET,
         STRSUPPL1 LIKE ADRC-STR_SUPPL1,
         STRSUPPL2 LIKE ADRC-STR_SUPPL2,
         STRSUPPL3 LIKE ADRC-STR_SUPPL3,
         NRART LIKE TPAR-NRART,
         VTEXT1 LIKE TPART-VTEXT,
         PARVW LIKE TPART-PARVW,
         BEZE_I LIKE TVLVT-BEZEI,
         VTEXT LIKE V_T178-VTEXT,
         V_TEXT like V_T188-VTEXT,
         BEZEI1 LIKE TVM1T-BEZEI,
         BEZEI2 LIKE TVM2T-BEZEI,
         BEZEI3 LIKE TVM3T-BEZEI,
         BEZEI4 LIKE TVM4T-BEZEI,
         BEZEI5 LIKE TVM5T-BEZEI,
         VTEXT2 LIKE TVKGGT-VTEXT,
         SMTP_ADDR LIKE ADR6-SMTP_ADDR,
     END OF TY_TAB.
DATA: ITAB TYPE STANDARD TABLE OF TY_TAB WITH HEADER LINE.
*WRITING THE QUERY
SELECT A1~VBELN
       A1~VKORG
       A1~ERDAT
       A1~AUGRU
       A2~BSTDK
       A2~BSTDK_E
       A2~BSTDK
       A2~KONDA
       A2~KDKG2
       A3~MATNR
       A3~SPART
       A3~KONDM
       A3~WAERK
       A3~NETWR
       A3~KWMENG
       A3~VKAUS
       A3~MVGR1
       A3~MVGR2
       A3~MVGR3
       A3~MVGR4
       A3~MVGR5
       A4~POST_CODE1
       A4~PO_BOX
       A4~NAME1
       A4~NAME2
       A4~CITY1
       A4~CITY2
       A4~COUNTRY
       A4~STREET
       A4~STR_SUPPL1
       A4~STR_SUPPL2
       A4~STR_SUPPL3
       A5~BEZEI
       A6~KUNNR
       A7~NRART
       A8~VTEXT
       A9~PARVW
       A10~BEZEI
       A11~VTEXT
       A12~VTEXT
       A13~BEZEI
       A14~BEZEI
       A15~BEZEI
       A16~BEZEI
       A17~BEZEI
       A18~VTEXT
     A20~SMTP_ADDR
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM VBAK AS A1
JOIN VBKD AS A2
ON A1VBELN = A2VBELN
JOIN VBAP AS A3
ON A1VBELN = A3VBELN
LEFT OUTER JOIN VBPA AS A6
ON A2VBELN = A6VBELN
AND A2POSNR = A6POSNR
*JOIN ADR6 AS A20
*ON A6ADRNR = A20ADDRNUMBER
JOIN ADRC AS A4
ON A6ADRNR = A4ADDRNUMBER
LEFT OUTER JOIN TVM1T AS A13
ON A3MVGR1 = A13MVGR1
LEFT OUTER JOIN TVM2T AS A14
ON A3MVGR2 = A14MVGR2
LEFT OUTER JOIN TVM3T AS A15
ON A3MVGR3 = A15MVGR3
LEFT OUTER JOIN TVM4T AS A16
ON A3MVGR4 = A16MVGR4
LEFT OUTER JOIN TVM5T AS A17
ON A3MVGR5 = A17MVGR5
JOIN TPAR AS A7
ON A7PARVW = A6PARVW
JOIN TPART AS A8
ON A8PARVW = A6PARVW
LEFT OUTER JOIN T178T AS A11
ON A3KONDM = A11KONDM
AND A11~SPRAS = SY-LANGU
LEFT OUTER JOIN T188T as A12
ON A2KONDA = A12KONDA
AND A12~SPRAS = SY-LANGU
JOIN TPART AS A9
ON A6PARVW = A9PARVW
LEFT OUTER JOIN TVLVT AS A10
ON A1ABRVW = A10ABRVW
AND A10~SPRAS = SY-LANGU
LEFT OUTER JOIN TVAUT AS A5
ON A1AUGRU = A5AUGRU
AND A5~SPRAS = SY-LANGU
LEFT OUTER JOIN TVKGGT AS A18
ON A8SPRAS = A18SPRAS
UP TO 100 ROWS
WHERE A1~VBELN IN S_VBELN.
*PRINTING THE OUTPUT
loop AT ITAB.
WRITE :
/(30) 'Order No                    :', itab-VBELN,
/(30) 'Sales Org                   :', itab-VKORG,
/(30) 'Order Date                    :', itab-ERDAT,
/(30) 'Purchase Order #           :', itab-BSTKD,
/(30) 'Purchase Order Date           :', itab-BSTDK,
/(30) 'Order Reason code            :', itab-AUGRU,
/(30) 'Order Reason description      :', itab-BEZEI,
/(30) 'Partner Type                :', itab-NRART,
/(30) 'Partner Type description      :', itab-VTEXT,
/(30) 'Partner no                :', itab-KUNNR,
/(30) 'Partner Name1                :', itab-NAME1,
/(30) 'Partner Name2                :', itab-NAME2,
/(30) 'Partner Address 1           :', itab-STREET,
/(30) 'Partner Address 2           :', itab-STRSUPPL1,
/(30) 'Partner Address 3           :', itab-STRSUPPL2,
/(30) 'Partner Address 4           :', itab-STRSUPPL3,
/(30) 'City                     :', itab-CITY1,
/(30) 'DISTRICT                :', itab-CITY2,
/(30) 'Country                 :', itab-COUNTRY,
/(30) 'Post Code                 :', itab-POSTCODE1,
/(30) 'PO BOX                     :', itab-POBOX,
/(30) 'Partner email                :', itab-SMTP_ADDR,
/(30) 'Material no                :', itab-MATNR,
/(30) 'Material Division           :', itab-SPART,
/(30) 'Product Line and Edition code:', itab-MVGR1,
/(30) 'Product Line and Edition Desc:', itab-BEZEI1,
/(30) 'Product Name code           :', itab-MVGR2,
/(30) 'ProductName Desc           :', itab-BEZEI2,
/(30) 'Product Version Code           :', itab-MVGR3,
/(30) 'Product Version Desc           :', itab-BEZEI3,
/(30) 'Product Platform Code      :', itab-MVGR4,
/(30) 'Product Platform Desc      :', itab-BEZEI4,
/(30) 'Product App Server Code      :', itab-MVGR5,
/(30) 'Product App Server Desc      :', itab-BEZEI5,
/(30) 'Compiler Code                :', itab-KONDM,
/(30) 'Compiler Desc                :', itab-VTEXT,
/(30) 'LanguageCode                :', itab-KONDA,
/(30) 'LanguageDesc                :', itab-V_TEXT,
/(30) 'Runtime Band Code           :', itab-VKAUS,
/(30) 'Runtime Band description      :', itab-BEZE_I,
/(30) 'Support Start Date           :', itab-BSTDK,
/(30) 'Support End Date           :', itab-BSTDK_E,
/(30) 'Support Level Code           :', itab-KDKG2,
/(30) 'Support Level Desc           :', itab-VTEXT2,
/(30) 'Order Quantity           :', itab-KWMENG,
/(30) 'Net Price                :', itab-NETWR,
/(30) 'Currency                :', itab-WAERK.
uline.
ENDLOOP.
if sy-subrc <> 0.
write : / 'No data found'.
endif.

Hi Jyotirmoy Deb,
Last time might be,you are the one that asking about using join statement on 3 tables.
Now what are you doing in your code. use are joining almost 18 tables.this will not work anyone, and it will slow down the processing time of the report.
First of all analysis the report what exactly you want and then
first read the header data as in your case you using the Sale Document Header data.
On the basis of Header data fetch the line item data.
Don't processes all the tables at a time using the join clause.Because it decrease the efficiency of the program.
Reward points,if useful.
Regards,
Manoj Kumar

Need help with XI certif for technical consultant

Hi XI experts ,
I am trying for certif for Development Consultant SAP NetWeaver u201904 - Exchange Infrastructure & Integration Technology - C_TBIT44_04 .
Can somebody please give me some sample questions and answers?
I really will appreciate such help since I donu2019t have any idea what kind of questions are at the exam!
I only have heard it is not an easy exam to take.?Is this true?
Also any shared experienced will be appreciate it. If you have, please give me more hands on information , not just course numbers and syllabus.
Looking forward to receive info from you. Please use emal contcts in my Business Card.
Thanks in advance all!
Jim

HI,
Yes its true ...any SAP certification is never ever be the easy stuff...that could be easily achievable....
You need to be well prepare for the Certification. There are many SDN links available for sample questions. you can just search on SDN as well as on Internet.
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8
1. SAP XI Certification - Important Topics
2. Regarding XI Certification Material.
3. Xi sample Certification questions
XI certification passing used to be normally 65%. It may vary based on the runtime exam rules.
There are marks as well as no of questions allocated for every section, so you may refer below link
you can go to the following site and check the information.
https://service.sap.com/%7Esapidp/011000358700005902252004E
https://service.sap.com/~sapidp/011000358700003595762004E
SAP XI Certification - Important Topics All about XI certification
Thanks
Swarup

Dependencies/Prerequisites for Inventory Migration

Hi experts!
just a quick question regarding migration of inventory from a SAP R4.6C to ECC6.0:
I need to know which master data objects have to be migrated before the inventory/stock, because the stock is dependent on them.
So far I have identified:
- G/L accounts
- Cost centres
- Material master data
- for vendor consignment stock: vendor master data and purchasing info records
We will migrate "customer consignment stock" (do we need the customer master data for that?) as well as subcontracting stock and "return packaging from customer" stock.
Any help would be greatly appreciated.
Andreas

For customer consignment you need customer masters.
For subcontract stock you have to have vendor masters.

Need help choosing optimal hardware for a laptop that will run AE CS5

BACKGROUND INFO (Questions listed below)
I need some help figuring out the best hardware configuration for a new laptop. I’m a student at a design school and I will be using the laptop to mainly run After Effects and to a lesser extent Photoshop and Illustrator. I don’t need to worry about 3D rendering software or Premier Pro. I am primarily interested in getting the best performance during editing. I am not looking for the best performance for final output. I would prefer to sacrifice final output times for better editing/interface performance.
I will be working with standard definition content and perhaps HD up to 720p on occasion. I do not need to operate in resolutions higher than 720p. My projects are generally animation and use many sources and many layers.
I’ve been reading up on optimal hardware configurations for CS5 but my understanding is still a little foggy and I would like to use this thread to figure out how to build the best machine for my budget. The budget is about $1400 to $1600 CANADIAN after tax.
I DON’T need help finding the laptop. I will search for it on my own. I just need to understand the best hardware to purchase within my budget.
I realize that it is probably impossible to buy the laptop I want with the hardware configuration I need “off the shelf”. Instead I will be looking for a good base model (~$900-$1100) and I will purchase the necessary hardware upgrades separately. I will not be purchasing a Mac.
Right now I’m thinking of a machine built something like this:
- 15”-16” screen (17” models are too big/heavy)
- Mid to high end i5 processor OR entry level i7 quad core
- 8GB RAM (I would go to 12GB, but it’s hard to find a 15”-16” laptop with 3 memory slots)
- SSD to replace HDD (However, if possible, I would like a laptop with dual HDD support or swap the optical drive for another HDD. If I had access to 2 drives, I would have and HDD/SSD combo).
- Medium/high end NVIDIA GPU to take advantage of OpenGL while editing.
QUESTIONS
1) Does the “Render Multiple Frames Simultaneously” option enhance general editing performance (applying filters, scrubbing through the timeline, reverting history states)? Or does it ONLY help speed up RAM previews and final output? Does it reduce the length of RAM previews?
1b) Is this option even necessary to enable on 64bit systems? (As far as I understand it was used to solve a problem where 32bit systems/software would only recognize 4GB of RAM per instance of AE).
1c) If I turn this option on to help with RAM previews, would I be hindering general editing performance in any way? Or does this option have basically zero drawbacks?
2) How come “Actual CPUs that will be used” will read 0 even if the sum total of RAM assigned to the CPUs plus the RAM reserved for other applications is less than the total available system RAM (on a 64bit system)? For example, I currently have 4GB RAM and 2 installed CPUs. I have 1.5GB reserved for other programs and when I set 0.75GB per CPU both CPUs are used. However when I set 1GB per CPU then 0 CPUs are used, even though the total RAM adds up to only 3.5GB.
CPU
3.) Considering the fact that I am more concerned with smooth performance while editing rather than final output speeds, would it be better to get a dual core i5 clocked around 2.5 or a quad core i7 clocked around 1.8?
4.) What is the difference between an i3 and an i5 processor even if they are clocked at the same speed? How does an i5 460M compare on the grand scheme of things?
RAM
6.) Should the quantity of RAM that I get (8GB vs 12GB) be based on the number of cores in my CPU? If so, how should I be calculating optimal RAM based on # of cores. Should I also be counting threads, or just actual physical cores?
STORAGE/SWAP
7.) Should I replace the HDD with an SSD? I'm looking for snappy interface performance while editing. I would think that if the RAM fills up it would be best to have the SSD for scratch/cache.
8.) What performance benchmarks are most important when considering an SSD for After Effects? (4k writes? IOs per second? Max read/write?)
9.) I can afford the OCZ Vertex2 120GB SSD. Would this be a good choice if an SSD is recommended?
10.) Would it be better to have 8GB of RAM and an SSD, or 12GB of RAM and an HDD? Explain why.
GPU
10.) After Effects utilizes OpenGL to enhance editing performance. I will not really be using Premier Pro, so catering to the CUDA Mercury Engine is not a concern. Do high end gaming cards provide significant gains in OpenGL performance? Or do OpenGL performance gains taper off around the mid-range GPUs? (i.e. can you justify buying a high end GTX 260M graphics card for enhanced editing performance versus an "entry level" dedicated card like the 310M?)
11.) What hardware specs are most important when considering a GPU for editing performance in AE? (Memory size? # of Pixel shaders? Core speed? Shader speed?)
Thanks so much for any answers you can offer to these questions.

Please make sure that you've read through this page and what it points to.
> 1) Does the “Render Multiple Frames Simultaneously” option
enhance general editing performance (applying filters, scrubbing through
the timeline, reverting history states)? Or does it ONLY help speed up
RAM previews and final output? Does it reduce the length of RAM
previews?
It only increases rendering speed for RAM previews and rendering for final output. In After Effects CS5, it doesn't decrease the length of RAM previews. (In CS4, it does.)
1b) Is this option even necessary to enable on 64bit
systems? (As far as I understand it was used to solve a problem where
32bit systems/software would only recognize 4GB of RAM per instance of
AE).
You misunderstood. Yes, it's still relevant on 64-bit computers. Moreso, in a way. (I'd rather not spend my entire Sunday writing out detailed answers to satisfy idle curiosity, so I'm not going to give all the technical detail to that answer.)
> 1c) If I turn this option on to help with RAM previews,
would I be hindering general editing performance in any way? Or does
this option have basically zero drawbacks?
It takes a small but nonzero time for the background processes to start up when they need to be used and shut down when they're done. And as they sit waiting, they take up a little bit of memory. So, it's not exactly correct to say that there are no downsides to leaving it on. But it's close. I leave it on.
> 2) How come “Actual CPUs that will be used” will read 0 even
if the sum total of RAM assigned to the CPUs plus the RAM reserved for
other applications is less than the total available system RAM (on a
64bit system)? For example, I currently have 4GB RAM and 2 installed
CPUs. I have 1.5GB reserved for other programs and when I set 0.75GB per
CPU both CPUs are used. However when I set 1GB per CPU then 0 CPUs are
used, even though the total RAM adds up to only 3.5GB.
4GB - 1.5GB for other software leaves 2.5 GB for After Effects.
If you have 1GB assigned per background CPU, then the foreground takes 1.2x that = 1.2GB. That leaves 1.3GB for background processes, which is enough for one background process. There's no point in starting only one background process to do rendering, so it doesn't bother. (Note: When background processes are rendering, the foreground process isn't rendering.)
> 3.) Considering the fact that I am more concerned with
smooth performance while editing rather than final output speeds, would
it be better to get a dual core i5 clocked around 2.5 or a quad core i7
clocked around 1.8?
Get the quad-core. That gives you a greater total number of cycles. And After Effects works very well with mutliple processors, even beyond Render Multiple Frames Simultaneously multiprocessing. An entirely unrelated sort of multiprocessing (multithreading) spreads work out to multiple processors.
> 6.) Should the quantity of RAM that I get (8GB vs 12GB) be based on the number of cores in my CPU? If
so, how should I be calculating optimal RAM based on # of cores. Should
I also be counting threads, or just actual physical cores?
The optimum amount is the amount that you can cram into the computer. I'm not kidding. Spend your budget on RAM until you have 4GB installed per processor (and I'm counting the virtual processors due to hyperthreading). If you have a quad-core, that's 8 CPUs with hyperthreading, so the optimum amount of RAM installed is 32GB. You can work with less, but you did ask about optimum. For HD work (i.e., 1920 pixels across), you're OK with more like 3GB installed per CPU. That's what I have at home: 24GB in a quad-core. You're going to assign 2/3 or so of the RAM to After Effects, so 3GB installed per CPU is 2GB per core for HD work in After Effects.
> 10.) Would it be better to have 8GB of RAM and an SSD, or 12GB of RAM and an HDD? Explain why.
12GB of RAM. Because After Effects likes RAM. (If you're thinking of deliberatly using virtual memory to swap memory to the hard disk, don't. That's a performance killer.)
> 10.) After Effects utilizes OpenGL to enhance editing performance.
Not really. If you're on a limited budget, don't even think about the GPU until you've already got the most RAM, the fastest CPUs, the largest number of CPUs, two fast hard disks, and a couple of good monitors. Then, and only then, should you even consider getting soemthing beyond a non-stock graphics card. Yes, OpenGL can be used to accelerate some things, but that's only for the low-fidelity preview renderer. (Pardon the bluntness, but I want to make sure that you heed this.)

Need help in dynamic report for a range of year and period

Dear all,
I need help in creating an ALV report with dynamic columns based on the Year and period entered on the selection screen. for example if in the year we enter 2002 and period range from 10 to 12 then we should get the 3 columns display for cost(example) for period 10/2002, 11/2002 and 12/2002.
Can anyone help me in achieving this dynamically since the user can enter the year also in intervals along with the period and data also needs to be populated in the corresponding columns.
An example code would be of great help.
Thanks,
Amit

Hi,
Use field symbols as follows.
TYPE-POOLS : SLIS.
TABLES : MARC,T001W.
DATA : BEGIN OF ITAB OCCURS 0,
       MATNR LIKE MARC-MATNR,
       END OF ITAB.
DATA : FIELDSTAB TYPE LVC_T_FCAT,
       STAB      TYPE LVC_S_FCAT,
       T_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       S_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
       NEW_LINE TYPE REF TO DATA,
       NEW_TABLE TYPE REF TO DATA,
       INDEX(3) TYPE C,
       STR(70),
       TEXT(6),
       CNT(1),
       TEXT1(16),
       REPID LIKE SY-REPID.
FIELD-SYMBOLS : <FS> TYPE STANDARD TABLE,
                <WA> TYPE ANY.
SELECT-OPTIONS : S_WERKS FOR MARC-WERKS NO INTERVALS,
                 S_MATNR FOR MARC-MATNR NO INTERVALS.
INITIALIZATION.
REPID = SY-REPID.
START-OF-SELECTION.
SELECT * FROM MARC
           INTO CORRESPONDING FIELDS OF TABLE ITAB
           WHERE MATNR IN S_MATNR
           AND   WERKS IN S_WERKS.
SORT ITAB BY MATNR.
DELETE ADJACENT DUPLICATES FROM ITAB COMPARING MATNR.
STAB-FIELDNAME = 'MATNR'.
STAB-DATATYPE = 'CHAR'.
STAB-INTLEN    = '18'.
APPEND STAB TO FIELDSTAB.
CLEAR CNT.
LOOP AT S_WERKS.
    CLEAR TEXT.
    CNT = CNT + 1.
    CONCATENATE 'EISLO' CNT INTO TEXT.
    STAB-FIELDNAME = TEXT.
    STAB-DATATYPE = 'CHAR'.
    STAB-INTLEN    = '16'.
    APPEND STAB TO FIELDSTAB.
    CLEAR S_WERKS.
ENDLOOP.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG = FIELDSTAB
    IMPORTING
      EP_TABLE        = NEW_TABLE.
ASSIGN NEW_TABLE->* TO <FS>.
CREATE DATA NEW_LINE LIKE LINE OF <FS>.
ASSIGN NEW_LINE->* TO <WA>.
PERFORM MOVE_DATA.
CLEAR S_FIELDCAT.
S_FIELDCAT-FIELDNAME = 'MATNR'.
S_FIELDCAT-TABNAME = ITAB.
S_FIELDCAT-SELTEXT_M = 'Part Number'.
S_FIELDCAT-NO_ZERO = 'X'.
S_FIELDCAT-DDICTXT   = 'M'.
APPEND S_FIELDCAT TO T_FIELDCAT.
CLEAR CNT.
LOOP AT S_WERKS.
    CLEAR T001W.
    CNT = CNT + 1.
    SELECT SINGLE * FROM T001W WHERE WERKS = S_WERKS-LOW AND SPRAS = SY-LANGU.
    CLEAR TEXT.
    CONCATENATE 'EISLO' CNT INTO TEXT.
    S_FIELDCAT-FIELDNAME = TEXT.
    S_FIELDCAT-SELTEXT_M = T001W-NAME2.
S_FIELDCAT-NO_ZERO = 'X'.
    S_FIELDCAT-DDICTXT   = 'M'.
    APPEND S_FIELDCAT TO T_FIELDCAT.
    CLEAR S_WERKS.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      IT_FIELDCAT = T_FIELDCAT[]
    TABLES
      T_OUTTAB    = <FS>.
*&      Form MOVE_DATA
      text
FORM MOVE_DATA.
LOOP AT ITAB.
    CLEAR STR.
    CONCATENATE ITAB-MATNR ' ' INTO STR SEPARATED BY SPACE.
    LOOP AT S_WERKS.
      CLEAR MARC.
      SELECT SINGLE * FROM MARC WHERE MATNR = ITAB-MATNR AND WERKS = S_WERKS-LOW.
      IF SY-SUBRC EQ 0.
        CLEAR TEXT1.
        TEXT1 = MARC-EISLO.
        CONCATENATE STR TEXT1 INTO STR SEPARATED BY SPACE.
      ELSE.
        CONCATENATE STR '0' INTO STR SEPARATED BY SPACE.
      ENDIF.
    ENDLOOP.
    <WA> = STR.
    APPEND <WA> TO <FS>.
    CLEAR ITAB.
ENDLOOP.
ENDFORM.                    "MOVE_DATA
Reward points if helpful.
Regards,
Sankar..

Need help in shutdown primary for maintaince (new to oracle dba)

Hi,
BANNER
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
PL/SQL Release 9.2.0.4.0 - Production
CORE 9.2.0.3.0 Production
TNS for Linux: Version 9.2.0.4.0 - Production
NLSRTL Version 9.2.0.4.0 - Production
actually we have primary database server and the physical standby server with protection mode is maxperformance and for maintaince we need to shutdown primary server so what are the steps i need to follow since my primary database is configured with DATAGAURD and i would like to follow the folllowing steps please advice me:
to shutdown standby server:
from primary server connecting to dgmgrl
dgmgrl>DISABLE SITE standby_site1;
then connecting to standby server
sql>alter database recover managed standby database cancel;
sql>shu immediate;
and finnaly connecting to primary server
sql>shu immediate
is it right since i am new to datagaurd concept need help.
Regards
Prakash

You can do so, but you would shutdown the whole standby environment. But normally standby is used to have no or only short downtime. So a switchover to the standby DB is performed (after this standby is now running as primary), maintenance is done on the primary and then at the end another switchover back from the 'new' primary to the 'old' primary.
Werner

Need help on SQL Statement for UDF

Hi,
as I am not so familiar with SQL statements on currently selected values, I urgently need help.
The scenario looks as follows:
I have defined two UDFs named Subgroup1 and Subgroup2 which represent the subgroups dependent on my article groups. So for example: When the user selects article group "pianos", he only sees the specific subgroups like "new pianos" and "used pianos" in field "Subgroup1". After he has selected one of these specific values, he sees only the specific sub-subgroups in field "Subgroup2", like "used grand pianos".
I have defined UDTs for both UDFs. The UDT for field "Subgroup1" has a UDF called "ArticleGroup" which represents the relation to the article group codes. The UDT for field "Subgroup2" has a UDF called "Subgroup1" which represents the relation to the subgroups one level higher.
The SQL statement for the formatted search in field "Subgroup1" looks as follows:
SELECT T0.[Name] FROM [dbo].[@B_SUBGROUP1] T0 WHERE T0.[U_ArticleGroup] = (SELECT $[OITM.ItmsGrpCod])
It works fine.
However, I cannot find the right statement for the formatted search in field "Subgroup2".
Unfortunately this does NOT WORK:
SELECT T0.[Name] FROM [dbo].[@B_SUBGROUP2] T0 WHERE T0.[U_Subgroup1] = (SELECT $[OITM.U_Subgroup1])
I tried a lot of others that didn't work either.
Then I tried the following one:
SELECT T0.[Name] FROM [dbo].[@B_SUBGROUP2] T0 WHERE T0.[U_Subgroup1] = (SELECT T1.[Code] FROM [dbo].[@B_SUBGROUP1] T1 WHERE T1.[U_ArticleGroup] = (SELECT $[OITM.ItmsGrpCod]))
Unfortunately that only works as long as there is only one specific subgroup1 for the selected article group.
I would be sooooo happy if there is anyone who can tell me the correct statement for my second UDF!
Thanks so much in advance!!!!
Edited by: Corinna Hochheim on Jan 18, 2010 10:16 PM
Please ignore the "http://" in the above statements - it is certainly not part of my SQL.
Please also ignore the strikes.

Hello Dear,
Use the below queries to get the values:
Item Sub Group on the basis of Item Group
SELECT T0.[Name] FROM [dbo].[@SUBGROUP] T0 WHERE T0.[U_GroupCod] =$[OITM.ItmsGrpCod]
Item Sub Group 1 on the basis of item sub group
SELECT T0.[Name] FROM [dbo].[@SUBGROUP1] T0 WHERE T0.[U_SubGrpCod]=(SELECT T0.[Code] FROM [dbo].[@SUBGROUP] T0 WHERE T0.[Name] =$[OITM.U_ItmsSubgrp])
Sub group 2 on the basis of sub group 1
SELECT T0.[Name] FROM [dbo].[@SUBGROUP2] T0 WHERE T0.[U_SubGrpCod1]=(SELECT T0.[Code] FROM [dbo].[@SUBGROUP1] T0 WHERE T0.[Name] =$[OITM.U_ItmsSubgrp1])
this will help you.
regards,
Neetu

Need help to check prerequisites for Document migration to SharePoint

Similar Messages

Maybe you are looking for