Need help to Configure FTPS connection for File Sender Adapter

Hi,
I want to Configure, FTPS connection (Secured Connection) for File Sender Adapter. Could anyone please guide me, what Information I require to configure. I just want to know what Information should I request the team inorder the configure FTPS so that it can be deployed properly.
I have checked with [SAP Help Link|http://help.sap.com/saphelp_nw04/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm] and while configuring the communication channel found that I need Keystore and the X.509 Certificate and Private Key. which needs to be deployed on the J2EE server by using the Visual Administrator.
Is there anything else, I need to configure.
Any help would be appreciated in this regard.
Thanks & Regards,
Varun.K

The basic things are Certificate/Keys which you already know. Usually it is enough for running a sceanrio.
However, if you have additional requirements, like FTPS for "Connection Security" for encryption, then you may need additional details like commands. Rest all settings are same as FTP.
Regards,
Prateek

Similar Messages

File selection sequence in the FTP connection for File Sender Adapter

Hi,
I have a file to Proxy scenario using FTP connection parameters.
If there are multiple files in the sender folder, XI picks up the files randomly with no processing sequence.
I want XI to pick up the files based on the date time stamp meaning the oldest file created in the folder should be processes first and rest all in sequence there after.
I know processing sequence can be set for NFS connection but not for FTP .
Please suggest if there's any way to make this work.
Thanks in advance.
Thanks and Regards,
Amit Bhagwat.
Edited by: Amit Bhagwat on Nov 4, 2009 5:17 AM

Hi
For the Transport Protocol "File Transfer Protocol (FTP)" files are always processed in ascending alphabetical order
If you want the file to be processed in sequence then you can use Quality of Service EOIO in the sender adapter.
The files are processed in the sequence they are picked up.
otherwise use BPM for File Sequencing..
Refer the following Threads
FTP Sender Adapter - Processing Sequence
Processing Sequence issue of FTP protocol
Regards
Abhijit
Edited by: Abhijit Bolakhe on Nov 4, 2009 10:32 AM

UDF to get the filename for File Sender Adapter

Hi,
I had an requirement to get the the Filename and map to the target payload.
I had configured the File Sender Adapter settings in the ID
This is the following UDF i got from SDN.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
But when iam using this UDF iam getting an error
RuntimeException in Message-Mapping transformation: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._MM_ORDER_CRS_OB_SAP_PROXY_IB_ method Filename$[com.sap.aii.mappingtool.tf3.rt.Context@54e154e1]
Please help me in correcting the error.
Thanks
Srinivas

Hi Jayson,
actually, in the interface mapping, it doesn't give exception.
The DynamicConfiguration is a constant retrieved from the container object, so it will never be returned as null (given that the container object was instantiated).
Just the retrieved value will be null (since it was not previously set), but no exception occurs.
In the message mapping, the container object is never instantiated, and that's the reason for the NullPointerException.
Regards,
Henrique.

Changing source file for file sender adapter in adapter module

Hi guys!
3rd party partner send us files, which are not acceptable by file adapter, so we need to implement (I suppose) adapter module in file sender adapter to correct the file format before it is taken by standard adapter. I have no experience in this development field. Could you give me:
1, whether it is possible (changing file contents before it is taken by standard file sender adapter)
2. any ideas, where to start with the development (pdf with info etc.)
Thanx a lot!
Olian

<i>2. any ideas, where to start with the development (pdf with info etc.)</i>
>>>>>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81
<i>1, whether it is possible (changing file contents before it is taken by standard file sender adapter)</i>
>>
yes you can achieve this in the logic in a module

Need help to open and look for file by name

Hi,
Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
How can i look for the file by his name ?
Thx =)

Hi ,
Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
The user ll type the serial that he wants delete ...
I already figured out what i need guys .. thx for the help ^^
I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
Thx ^^

New to sap - need help in configure backup strategy for SAP XI server.

hi gurus
being a netweaver guy, recently i have been given the responsibility of few basis activities.like database backup.
can any one tell me clear procedure to take both daily online and weekend full offline backup of oracle in to disk first and then to tape. i have seen in the internet material few discussing about brbackup and few about sap DB13. i am totally confused which one to use, and which is good. please help
akhil

Hi,
welcome on board as SAP Netweaver guy,
don't be confused both DB13 and BRtools are the same both of them will call brbackup.
to configure the brtools you have to change in your brtools profiles located at %ORACLE_HOME%/dbs
please before changing any thing take backup from that folder.
- to take the backup to disk then to tape you will need extra backup software, because using the SAP slandered tools you have to select either Disk or Tape.
Thanks
Sherif

How to have Secure Connection for File Adapter.Pls help

Hi All,
For File to File Scenario
How to have Secure Connection for File Adapter.
Pls send links/blogs explaining this scenario.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

Need Help on Configuring the Site to Site VPN from Cisco 2811 to Websense Cloud for web Traffic redirect

Hi All,
I need help on Configuring the Site to Site VPN from Cisco 2811 to Websense Cloud for web Traffic redirect
2811 having C2800NM-ADVIPSERVICESK9-M
2811 router connects to the Internet SW then connects to the Internet router.
Note- For Authentication am using the Device ID & Pre share key. I am worried as all user traffic goes with PAT and not firing up my tunnel for port 80 traffic. Can you please suggest what can be the issue ?
Below is router config for VPN & NAT
crypto keyring ISR_Keyring
pre-shared-key hostname vpn.websense.net key 2c22524d554556442d222d565f545246
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp keepalive 10
crypto isakmp profile isa-profile
   keyring ISR_Keyring
   self-identity user-fqdn [email protected]
   match identity user vpn-proxy.websense.net
crypto ipsec transform-set ESP-NULL-SHA esp-null esp-sha-hmac
crypto map GUEST_WEB_FILTER 10 ipsec-isakmp
set peer vpn.websense.net dynamic
set transform-set ESP-NULL-SHA
set isakmp-profile isa-profile
match address 101
interface FastEthernet0/1
description connected to Internet
ip address 216.222.208.101 255.255.255.128
ip access-group HVAC_Public in
ip nat outside
ip virtual-reassembly
duplex full
speed 100
no cdp enable
crypto map GUEST_WEB_FILTER
access-list 101 permit tcp 192.168.8.0 0.0.3.255 any eq www
access-list 103 deny   ip 192.168.8.0 0.0.3.255 host 85.115.41.187 log
access-list 103 deny   ip 192.168.8.0 0.0.3.255 host 85.115.41.181 log
access-list 103 deny   ip 192.168.8.0 0.0.3.255 host 85.115.41.182 log
access-list 103 deny   ip 192.168.8.0 0.0.3.255 86.111.216.0 0.0.1.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 116.50.56.0 0.0.7.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 86.111.220.0 0.0.3.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 103.1.196.0 0.0.3.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 177.39.96.0 0.0.3.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 196.216.238.0 0.0.1.255
access-list 103 permit ip 192.168.8.0 0.0.3.255 any
ip nat pool mypool 216.222.208.101 216.222.208.101 netmask 255.255.255.128
ip nat inside source list 103 interface FastEthernet0/1 overload
ip nat inside source route-map nonat pool mypool overload

How does Websense expect your source IPs in the tunnel? 192.168.8.0 0.0.3.255 or PAT'ed 216.222.208.101 ?
Check
show crypto isakmp sa
show crypto ipsec sa
show crypto session
You'd better remove the preshared key from your post.

Need Help, Time capsule stoped connecting

need help, time capsule stoped connecting. the yellow light is flashing.
I have important file that can't lose them, how can I restore connection without losing all files?
Hope someone can help me
Best regards
Chico
Message was edited by: quicova

Best thing to do is connect your computer to the Time Capsule (LAN port) using an ethernet cable. Once connected, run Airport Utility and it should let you know why the light is yellow and attempt to fix the problem. If the problem persists, you should either re-configure the Time Capsule properly or conduct a hard reset and start the configuration over from the factory settings.
http://support.apple.com/kb/HT1300

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Dynamic Configuration - Set Directory Path for File Receiver Adapter

Hi Experts,
I have a question regarding the dynamic configuration for the file adapter. Is it possible to set a directory path without a message mapping for the file receiver adapter? the problem is that I want to import a pdf document. this pdf document I want to store in a dynamic directory (depending on the filename). so I have to read the filename out of the dynamic configuration and generate (depending on the filename) a directory for this file. Is that possible without a message mapping? I cannot make a message mapping because the file has the pdf format and should not get changed.
best regards
Christopher Kühn

Hi Gaurav,
I use the ASMA (respectively the filename) for the sender adapter. After the pdf was imported into XI this filename is in the ASMA.
But what then??? How can I get this filename with the help of the variable substitution? and if I have this filename I have to change this filename a bit to generate the name / path of the directory.
Please explain it to me detailled
Thanks and regards
christopher

I have a PC and a need help to configure my external hard disk on my network. Thanks

I have a PC and a need help to configure my external hard disk on my network. Thanks

If you mean you wish to plug a USB drive into the Airport Extreme router (or TC not express) that is easy..
The disk must be formatted FAT32.. as if.. stay away from FAT .. or HFS+ ie Mac OS extended Journaled.
Format the disk on a Mac is best.. and even use GUID partition scheme not MBR.
The PC has no issue writing and reading files because this is a network drive.. The PC does not write to the drive.. it writes files to the Airport OS which writes and reads the disk and passes the info using standard windows SMB.. To the windows computer it will be a Windows NT server.. FAT32 setup.
If your setup is different.. to my hugely guessed assumptions.. give details.. always helps to have.. make and model.
Make and model of disk.. make and model of router.. how the setup will be done.. what windows OS you run.. etc etc.
As it stands your question could have nothing to do with apple at all.. other than you posted in a forum so I guess there is something apple in there somewhere.

Need Help in installations and connecting displays. Please!

Hello Everyone,
Need Help in installations and connecting displays. Please!
Im planning on installing in a cafe shop : (Store Self improvement)
4 TV's (can be Built in Wi-Fi) Store menus
2 touch screen tablets. To be use as Emenu (digital Menu)
1 60' TV ( Built in Wi-Fi) as Entrainment displays and in store advertising
What do I need to organize my project and make it looks cool and how to manageand controll all of the displays TV.

TNSTAAFL
I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you.

I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.

I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.

~graffiti wrote:
PjonesCET wrote:
I know if you attempt to download and exe file to Mac from a Mac Partition you'll get something like. Cannot not understand file format octet-stream. This means it does not recognize MS execute files.
Not necesarily. I've done it a few times.
PjonesCET wrote:
I'm not sure you can download a PC copy of Acrobat 9 unless you operating from bootcamp or other such application and running the PC partition.
Yes. You can.
I've learned something. New. This must be recently changed. That last time I clicked on a Link I though was a dmg file and turned out it was and exe file my Macs wouldn't allow me to do so. But haven't tried recently everytime and exe file comes up I cancel. I gues I am used to the time everytime a Virus or some other nasty was downloaded it was packaged in and exe file and Macs owuldn't allow it. I suppose with the INtel guts now they can no longer refuse to download.

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

Need help to Configure FTPS connection for File Sender Adapter

Similar Messages

Maybe you are looking for