Need help to determine sequence of the patches

--Patch 3485155 how to apply using DOC ID 302074.1 As per that 1 of the prereq of patch 4626807 we do not have. when I am reading readme of 4626807
----4626807,4626807 is now superseeded by 6323851 readme of 6323851 says
2 .Pre-requisite or Co-requisite which is not included with this patch:
Co-requisite:
Patch 4761660:FP.M Upgrade Issues:PA_COST_PLUS INVALID.
3. Patch Applicable for versions/releases:
11i.PJ_PF.M( which is a3485155)
7. Pre-patch application steps
This is a pre-install patch. This patch should be applied with argument
preinstall='y'
----4761600, 4761600 Readme says
3. Patch Applicable for versions/releases:
11i.PJ_PF.M (which is 3485155)
What should be our sequence of applying above patches?

Hi,
metalink says
"If you are downloading patch 4626807 because it is a prerequisite for another patch or patchset, *you should verify whether or not 6323851 is suitable as a substitute prerequisite before downloading it*."
Thanks

Similar Messages

Hi i need help on BAPI to Update the ADRT & ADR6 tables

hi,
i need help on BAPI to Update the ADRT & ADR6 tables
these are the fields to be updated
ADRT-Remark Table
ADR6-SMTP_ADDR
ADR6-DFT_RECEIV
Please guide me what parameters to be passed to update
ADR6 & ADRT tables

Look at this function Group
<b>BUBA_3                         SAP BP: External BAPI Function Modules     </b>
BAPI_BUPA_ADDRESS_ADD          SAP BP, BAPI: Add Address
BAPI_BUPA_ADDRESS_CHANGE       SAP BP, BAPI: Change Address
BAPI_BUPA_ADDRESS_GET_NUMBERS SAP BP, BAPI: Read Address Numbers
BAPI_BUPA_ADDRESS_GETDETAIL    SAP BP, BAPI: Read Address
BAPI_BUPA_ADDRESS_REMOVE       SAP BP, BAPI: Delete Address
BAPI_BUPA_ADDRESSES_GET        SAP BP, BAPI: Determine All Addresses
BAPI_BUPR_CONTP_ADDR_ADD       SAP BP, BAPI: Add Contact Person Relationship Address
BAPI_BUPR_CONTP_ADDR_CHANGE    SAP BP, BAPI: Change Contact Person Relationship Address
BAPI_BUPR_CONTP_ADDR_GETDETAIL SAP BP, BAPI: Read Contact Person Relationship Addresses
BAPI_BUPR_CONTP_ADDR_REMOVE    SAP BP, BAPI: Delete Contact Person Relationship Address
BAPI_BUPR_CONTP_ADDRESSES_GET SAP BP, BAPI: Read Contact Person Relationship Addresses
BAPI_BUPR_EMPLO_ADDR_ADD       SAP BP, BAPI: Add Employee Relationship Address
BAPI_BUPR_EMPLO_ADDR_CHANGE    SAP BP, BAPI: Change Employee Relationship Address
BAPI_BUPR_EMPLO_ADDR_GETDETAIL SAP BP, BAPI: Read Employee Relationship Address
BAPI_BUPR_EMPLO_ADDR_REMOVE    SAP BP, BAPI: Delete Employee Relationship Address
BAPI_BUPR_EMPLO_ADDRESSES_GET SAP BP, BAPI: Read Contact Person Relationship Addresses
Look also at OSS <a href="https://service.sap.com/sap/support/notes/306275">Note 306275 - Transferring address data</a>
Regards

I have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest from itouch to laptop please??

i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??

See this previous discussion:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Need help to log off iTunes - the tab with the current Apple-iD is "greyed" out.

Need help to log off iTunes -> the tab with the current Apple-iD is "greyed" out. Can anyone help me?

Do you have Restrictions turned on?

Need help , when we turn on the mac i can hear the fan and there is a picture of the world flashing for about a minute or 2 on start up . But the fan I can hear non stop ?

need help , when we turn on the mac i can hear the fan and there is a picture of the world flashing for about a minute or 2 on start up . But the fan I can hear non stop ?

A flashing question mark or globe appears when you start your Mac

Mainstage 1 - can I assign music keyboard key or computer space bar to sequence through the patches?

Using Mainstage verions 1 - is it possible to assign another computer key, i.e. the spacebar, to allow sequential patch changing - similar to using the down-arrow-key? And/or is it possible to assign one of the music synth controller's keys, or buttons, to sequence through the patches? Thanks.

I fixed it! I searched the knowledge base and found an Apple article! Thanks for reading!

Need help recording three shows at the same time

I have the FiOS DVR, and have a problem this TV season. There are 3 shows that we watch that are on at the same time. if we are home that night, we can record two on the DVR and watch the other in another room. Not ideal, but we can handle it. But if we are out, we are hosed. I have an old series 1 Tivo that I would think I could factor in here....which I could timer record on a different TV. Any way to do it on my regular TV? Not sure how I could hook up the Tivo with the DVR and the rest of it.
Thanks!
Alan

DocAlan02 wrote:
I have the FiOS DVR, and have a problem this TV season. There are 3 shows that we watch that are on at the same time. if we are home that night, we can record two on the DVR and watch the other in another room. Not ideal, but we can handle it. But if we are out, we are hosed. I have an old series 1 Tivo that I would think I could factor in here....which I could timer record on a different TV. Any way to do it on my regular TV? Not sure how I could hook up the Tivo with the DVR and the rest of it.
Thanks!
Alan
I have a similar setup with a Replay.
You will need to get a Verizon Digital Adapter for $3.99 per Month and an IR Blaster for your Tivo.
Connect the Digital Adapter (DCT-700) to the FIOS Coax (May need to use a Splitter). Connect the Composite Out cables from the DCT-700 to the Tivo. Connect the IR Blaster from the Tivo to the front of the DCT-700. Configure the Tivo and tell it you have FIOS Cable and Digital Adapter. You may need to find the right codes to use to control the FIOS box from the Tivo.
Once you get it configured you will be able to tell the Tivo to record the 3rd program and it will switch the box to the channel and record it. If the box is near your other Verizon STBs you will need to hide it or cover the IR Sensor so that the remote for the main STB does not control the Digital Adapter.
As an added bonus you can connect the Coax Out from the DCT-700 to your Main TV if it has PIP and now you have a 2nd input source to make PIP work.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

I need help with viewing files from the external hard drive on Mac

I own a 2010 mac pro 13' and using OS X 10.9.2(current version). The issue that I am in need of help is with my external hard drive.
I am a photographer so It's safe and convinent to store pictures in my external hard drive.
I have 1TB external hard drive and I've been using for about a year and never dropped it or didn't do any thing to harm the hardware.
Today as always I connected the ext-hard drive to my mac and click on the icon.
All of my pictures and files are gone accept one folder that has program.
So I pulled up the external hard drive's info it says the date is still there, but somehow i can not view them in the finder.
I really need help how to fix this issue!

you have a notebook, there is a different forum.
redundancy for files AND backups, and even cloud services
so a reboot with shift key and verify? Recovery mode
but two or more drives.
a backup, a new data drive, a drive for recovery using Data Rescue III
A drive can fail and usually not if, only when
and is it bus powered or not

Hi, I need help extracting a video in the best HD, got this not so great test:

Hi everyone,
I've recently purchesed the Premiere Elements 9,
I use the Panasonic HDC HS700 which is a great camera...
I tried like a million times to export a video with different HD settings but I can't find the ultimate to show the real quality of My HDC HS700
check out this clip I just made:
http://www.youtube.com/watch?v=w0Jo6UQY9No
I used MPEG export with 1280 resolution,
what are the parameters that need to be adjusted to get the best out of the export?
I've tried the H.264 codec but it keeps messing around with the size of the video so it plays like a square 4:3 really messes up the original 16:9
though I was using 16:9 settings...
I hope I could get some help here.
Thanks in advance,
Radion.

For the Export choices, one starts with what their delivery scheme is, say to BD disc, or perhaps streaming Video for the Web. That will dictate much of what one will choose next.
Within those two delivery schemes, there are choices also. For the BD, if one is working exclusively in PrE, then Export/Share is not necessary, as PrE has BD authoring capabilities. If one is using another program to author, then there are two allowed choices: BD-compliant H.264, or HD MPEG-2, which is BD-compliant. For streaming media, then there are many choices, from WMV, to Flash (FLV), to DivX, to H.264. Each has pluses and minuses, and much might depend on the Web page, on which one will display the AV file. If, for instance, the Web page has an embedded QT Player, then the H.264 in a MOV wrapper is probably the best bet, while if there is an embedded Flash player, the FLV would be the choice. If one wishes a self-contained Flash player, then a program, like Adobe Flash, can bundle the FLV into an SWF file.
Knowing exactly how you need to deliver the output file will get you (and us) started on picking the best format/CODEC and then the internal settings for Export/Share.
Good luck,
Hunt

I need help in sync music from the ipod store that I have purchased to my ipod.

I need help syncing my music onto my ipod. Anyone there to help?

There is a few events where I could see this happening...
It's possible if you computer is not authorized with your iTunes Store account it may not have transfered your purchases from the iPad to the computer. To check, Open iTunes> Select the "Store" menu along top of the program and select Authorize this computer. Sign in with your AppleID and password, this will make sure your computer is authorized for the future so you can transfer purchases from your device.
http://support.apple.com/kb/HT1848
However, if your Movies are missing now you'll need to request to redownload or "regrant" them. Please send an email ticket into iTunes Store via...
http://www.apple.com/support/itunes/
Select "Video Purchases" in the grey boxes, then "Lost or Missing Items", then click the link to "Email Us" on the right. Fill out that form and the folks at the iTunes Store should get back to you less than 24 hours.

I need help to convert photos in the .swf format to a format that will open on iOS

I need help converting photos in the .swf format to a format that will work on my Mac. Thanks

SWF is a Flash file that should be able to be opened with your web browser on your Mac. Probably not on iOS though.
You will likely need to find the source file for the application that created the SWF and the image will be in that. You could then export/extract the image and have it as a stand alone file.
It does look like there are applications that can do what you are looking for though: https://www.google.com/search?q=SWF+to+JPG

Need help w/wgrt54gs and changing the ip address.

I need help changing the ip address to match my ip address i got the unit from a friend and don't know the password.

Press and hold the reset button for 30 seconds and release. Wait 30 seconds and power cycle the router. Connect vie wired computer to 192.168.1.1 username blank password admin and configure your router normally.

Need help with Expressions to get the sum of rows between dates

Date Total
8/06/2010 $2000
8/10/2010 $5000
8/28/2010 $2500
9/10/2010 $5000
9/16/2010 $2000
9/25/2010 $7000
9/28/2010 $2500
I need sum of rows based on month. I have tried following syntax. It did not work, which is returning $0. Appreciate any help i get.
=sum(iif(Date.value>="8/01/2010" AND Date.value<="8/30/2010",Total.value,0))

Hi RG K,
According to your description, you want to calculate sum of total based on month use expression, but the expression does not work. If that is the case, please refer to the following steps:
In design surface, right-click Insert and click Text Box.
Right-click inside of the text box, then click expression.
In Expression text box, type the expression like below:
=sum(iif(Fields!Date.Value>="8/01/2010" AND Fields!Date.Value<="8/30/2010",Fields!total.Value,CDec(0)))
In this expression, the data type of total is Decimal, so we need to convert 0 to Decimal use CDec() function. If data type of total is Double, we need to use CDbl() function.
The following screenshot is for your reference:
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Need help quickly as possible for the error 0xc004c008

hi,i have lenovo ideapad z580 laptop with windows 8 pre-installed still within the warranty period but after doing one key recovery for the second time an activation error appear as following "the product key is already being used on another pc,try
a different key or buy new one" with the following error code "0xc004c008" and i have contacted lenovo they gave me new product key but also the problem still exist and also one of my friends have a look at the laptop and told me that to go
to lenovo and have a new windows 8 installed on the laptop but i am really confused and don't know what should i do? . So,please i am really need help quickly and thanks in advance

Well, there's enough time, so if you start the ball rolling with your code then people will help - but you have to do the work. We won't do your homework...

Need help with installing Windows for the bar exam

I need to retake the bar exam in Feb 2011 and I've decided to switch to typing. I am trying to figure out what Windows I need (the software says XP is fine but is that even available anymore)- so can someone walk me through this process? I've partioned my hard drive with the default 5GB but should it be more?
I'm looking at buying Windows- is XP okay or should I shell out for 7-i.e. is one more compatible with Macs?
And then finally, in the installation instructions they mention that I need my Mac OS disc for the process- is that the snow leopard disc or something else? My discs are in storage right now so should I wait until I get them before starting this process or can I get replacements if I accidentally threw them out in moving?
Sorry for all the questions, but well, I'm racing to get everything done and I want to make sure I don't crash my system halfway through the exam!

You don't need Boot Camp, but even XP will have a lot of stuff to update from after the install, and that takes temp space. Just as your Mac shows 5-10GB there is add'l hidden space used.
Apple's 'requirements' has gotten others in trouble and I was pretty sure it was more like 10GB. Plus a lot of XP discs are now SP3.
XP out of the box but connected to the net is just waiting for malware, average is 15 minutes to be infected. 7 is better and just in case you need it again.
System Builder can come in 32 or 64-bit but XP is 32-bit only.
VirtualBox by Oracle is a free VM.
1GB for one program actually seems like a lot, or is that RAM requirement?

Need help to determine sequence of the patches

Similar Messages

Maybe you are looking for