Need help to develop CMDB using Apex

Hi,
We have a large number of servers, databases, environments, applications, etc for which we have planned to create a repository. Hence we need to develop a CMDB for the same.
I have gone through the example tutorials related to Apex.
However, I have never used Oracle 11g or Apex or SQL*Plus, which are required for this purpose.
After installing Oracle11g, how do I create a test/fresh database in Oracle before installing Apex in it?
So can someone help me with a detailed procedure to implement this CMDB, including installation of Apex?
Thanks in advance.
You can also reach me at [email protected]
Regards
Sharath
Edited by: 906997 on Jan 10, 2012 1:35 AM
Edited by: 906997 on Jan 10, 2012 1:55 AM

Hello Sharath,
>
After installing Oracle 11g, we need to create some database in it so that Apex can be installed in it right?
Can you please guide me on how to create the first database or some database in Oracle 11g?
>
You have to create a database if only you have installed Oracle 11g it with Install Database Software Only instead of Create and Configure Database option.
If don't have a database now you have to create one with Database Configuration Assistant, suppose you have Oracle Database 11g Release 1:
http://docs.oracle.com/cd/B28359_01/server.111/b28301/install003.htm#BABEIAID
Besides this forum category is dedicated to Oracle Application Express, for Oracle Database related questions please post on:
{forum:id=61}
You will get appropriate answer when you post in appropriate forum.
In order to get accurate/appropriate response you should include at least following information with your question:
<ul>
<li>Full APEX version</li>
<li>Full Database version</li>
<li>APEX Web server architecture (EPG, OHS or APEX listener)</li>
<li>Browser(s) and version(s) used</li>
<li>Operating system with version</li>
</ul>
Please read the [url https://wikis.oracle.com/display/Forums/Forums+FAQ]FAQ and [url https://forums.oracle.com/forums/ann.jspa?annID=1324]forum instructions for more information on using OTN forums effectively.
Please update your forum profile with a real handle instead of *906997*.
Hope it helps!
Regards,
Kiran

Similar Messages

  • Need help to develop Pythagoras theorem-

    Hi i need help to develop proofs 2,3,4
    of pythagoras theorems in java as demonstrations
    These are applets can anyone help me with it or give me an idea of how to go about developing it -
    the site is the following
    http://www.uni-koeln.de/ew-fak/Mathe/Projekte/VisuPro/pythagoras/pythagoras.html
    then double click on the screen to make it start

    Pardon my ASCII art, but I've always liked the following, simple, geometric proof:
         a                   b
    ---------------------------------------+
    |       |                                |
    a|   I   |              II                |
    |       |                                |
    ---------------------------------------+
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    b|  IV   |              III               |
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    ---------------------------------------+It almost goes without saying that I+II+III+IV == (a+b)^2, and II == IV == a*b,
    I == a*a and III == b*b, showing that (a+b)^2 == a^2+a*b+a*b+b^2.
    I hope the following sketch makes sense, stand back, ASCII art alert again:     a                   b
    ---------------------------------------+
    |               .             VI         |
    |     .                 .                |a
    | V                               .      |
    |                                        +
    |                                        |
    |   .                                    |
    b|                                     .  |
    |                                        |
    |                  IX                    |
    | .                                      |
    |                                    .   |b
    |                                        |
    +                                        |
    |      .                                 |
    a|               .                  . VII |
    |  VIII                   .              |
    ---------------------------------------+
                     a                    bThe total area equals (a+b)^2 again and equals the sum of the smaller areas:
    (a+b)^2 == V+VI+VII+VIII+IX. Let area IX be c^2 for whatever c may be.
    V+VII == VI+VIII == a*b, so a^2+b^2+2*ab= c^2+2*a*b; IOW a^2+b^2 == c^2
    Given this fundamental result, the others can easily be derived from this one,
    or did I answer a question you didn't ask?
    kind regards,
    Jos

  • I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!! iPhone 4S, iOS 5.0.1

    I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
    iPhone 4S, iOS 5.0.1

    Try updating to iOS 6.1.3.

  • Need help writing host program using LabView.

    Need help writing host program using LabView.
    Hello,
    I'm designing a HID device, and I want to write a host program using National Instrument's LabView. NI doesn't have any software support for USB, so I'm trying to write a few C dll files and link them to Call Library Functions. NI has some documentation on how to do this, but it's not exactly easy reading.
    I've written a few C console programs (running Win 2K) using the PC host software example for a HID device from John Hyde's book "USB by design", and they run ok. From Hyde's example program, I've written a few functions that use a few API functions each. This makes the main program more streamlined. The functions are; GetHIDPath, OpenHID, GetHIDInfo, Writ
    eHID, ReadHIC, and CloseHID. As I mentioned, my main program runs well with these functions.
    My strategy is to make dll files from these functions and load them into LabView Call Library Functions. However, I'm having a number of subtle problems in trying to do this. The big problem I'm having now are build errors when I try to build to a dll.
    I'm writing this post for a few reasons. First, I'm wondering if there are any LabView programmers who have already written USB HID host programs, and if they could give me some advice. Or, I would be grateful if a LabView or Visual C programmer could help me work out the programming problems that I'm having with my current program. If I get this LabView program working I would be happy to share it. I'm also wondering if there might already be any USB IHD LabView that I could download.
    Any help would be appreciated.
    Regards, George
    George Dorian
    Sutter Instruments
    51 Digital DR.
    Novato, CA 94949
    USA
    [email protected]
    m
    (415) 883-0128
    FAX (415) 883-0572

    George may not answer you.  He hasn't been online here for almost eight years.
    Jim
    You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

  • Need help in developing BADI for IT0001

    Hi All,
    I need help in developing BADI for IT0001.
    On IT0001 create or change, there is need to update IT0017 with following data from IT0001
    -Company Code
    -Cost center
    -Business Area
    -Begin and End Date.
    Other fields from IT0017 need to be derived from Position and update in IT0017.
    Please guide me how I can address this. I do not want to go for dynamic action, as it is not getting evoked during background jobs.
    I am new to BADI development and will appreciate step by step instructions.
    Thanks

    Hi,
         follow the below steps to achive
    Steps:
    1.     Execute Business Add-In(BADI) transaction SE18
    2.     Enter BADI name i.e. HRPAD00INFTY and press the display
            button
    3.     Select menu option Implementation->Create
    4.     Give implementation a name such as Z_HRPAD00INFTY
    5.      You can now make any changes you require to the BADI within this
            implementation, for example choose the Interface tab there are 3 methods avialble
    6.     Double click on the method you want to change, you can now enter
            any code you require.
    7.      Please note to find out what import and export parameters a
            method has got return the original BADI definition
            (i.e. HRPAD00INFTY) and double click on the method name
            for example within HRPAD00INFTY contract is a method
    8.      When changes have been made activate the implementation
    <b>Reward points</b>
    Regards

  • I need help from chile and use a language translator to write and not turn my iphone4

    I need help from chile and use a language translator to write and not turn my iphone4

    http://support.apple.com/kb/TS3281       
    Not turn on

  • Need help in developing mobile app using SAP

    Hi
    I have a team of Android, iOS and Windows developers and we are planning to start developing mobile using SAP and SAP Fiori. Need help in getting started with SAP mobile development like i need plugins and development kits that i need to use.
    Thanks
    Ram

    Hi,
    What help needed ?
    For SAP Fiori  Use this link : http://scn.sap.com/docs/DOC-41598
    For SAP Fiori Installation and Configuration Steps: http://scn.sap.com/community/mobile/blog/2014/06/10/fiori-technical-installation-and-configuration-of-one-app-from-a--z
    Which Software you will use to  develop Mobile Apps in SAP Platform ?So that i will suggest what to do ..
    Regards
    Lokesh

  • Need help to develop a custom connector

    I need some help on developing the custom connector to Homegrown application and the version i am using is OIM9.0.3
    First of all what are the steps do we need to care while developing a custom connector.
    I can't able to find the process in google to develop the custom connector.
    If you have any data regarding the development of custom connector, plz share to me....
    What are the thing do we need to take care while developing the connector.
    I referred in OIM9.1 version there was an option to develop the Custom connector by using Genric technology, can we create the custom connector by using the GTC feature in OIM 9.1
    early response will be appreciated

    The docs for the new GTC framework are here: http://download.oracle.com/docs/cd/E10391_01/doc.910/e10360/about.htm#Toc153968019. GTC is useful if you target application exposes standards-based SPML (Service Provisioning Markup Language) user management interfaces, although it sounds like this isn't the case for you.
    You will most likely need to go the traditional route in terms of connector development, which involves building OIM Process Task Adapters to invoke the application API's (I assume they're Java?) and invoking those adapters from within an OIM Provisioning Process.
    Rob

  • Need help in english to use my iphone4 with orange.fr in france

    I am travelling in France with my factory unlocked iphone4. England and Thailand services have been fine but Orange France is a nightmare. They say I can't get 3G on my iphone4 and there is no english speaking support to help me out. My network settings are turned off but my 20 euro credit has either dissappeared or never was there in the first place. Where can I get English support for this company?

    Hello
    The whole story is a little bit confusing for me. So lets see what you wrote:
    >... thinking that it would fix it but it ended up erasing the whole of my computer even windows 7.
    Thinking is wrong. What you need is exact info about recovery installation and this can be found in users manuals document. Recovery disc is not like Microsoft installation disc and cannot be used for repair. Recovery disc contains recovery image and can be used for clean OS installation (recovery image installation) only.
    > So now I have a computer I can't use
    Why you cannot use it? Recovery image installation installs OS again. Which OS is installed after running recovery image installation?
    > I have also bought the product recovery disks from toshiba's backup media site
    But why if you already have recovery disc that you have used at the beginning of the whole story?
    What you need to do is to use this original disc for OS installation.
    -start your notebook and press F12 several times to enter BOOT menu
    -when the menu is shown put recovery disc into ODD
    -select CD/DVD drive in the menu and press ENTER
    -follow the menu on the screen
    After recovery image installation you will have factory settings again and everything should be OK.
    More questions?

  • Need Help Understanding How To Use iMessage Between Two iPhones

    I have an iPhone 4 and my wife an iPhone 3GS.  We both have iOS 5, but I have discovered something about iMessage I need to make sure I understand correctly.  As I understand it iMessage can send text even if our voice carrier service is unavailable.  I tend to loose signal inside the building I work in.  I usually can get texts in and out, but sometimes not.  But in testing the two phones sending iMessages, I've noticed is that if I have one of the phones with iMessage turned on and the other with iMessage turned off, the two phones will not be able to exchange text.  Is that how it's supposed to work?  Even though one of these phones can receive an iMessage doesn't mean the other one send one back.  Can't the system detect when one phone is connected and another one not, and the one that is not gets sent SMS messages instead?  I don't want to try to send my wife an iMessage because I can't get a voice signal in my building, but her have iMessages turned off and not able to get any messages from me, iMessage or SMS.  I guess I need help better understanding how this actually works between the two phones so I can always get texts back and forth between my wife and I.  My other misgiving is that this iMessage thing consumes my data limit.  My wife gets unlimited because she had her phone before the limits were imposed, but I got on board after, so I am hesitant to use iMessage all the time because of it.  I have no intention to send picture mail through iMessage, but the thing is if I wanted to switch to SMS to send picture mail to save data, but my wife's phone is set to iMessage, she won't get it.  If this is how this thing is supposed to work, I'm not really impressed.  Some insight would be appreciated

    I think you are making this way too complicated. Why are you turning iMessage off? If you are at your office connect to the WiFi there and send your wife messages that way (unless your office is blocking the port iMessage uses). When possible the two phones will use iMessage but will revert to SMS is iMessage is not available if that option is set that way.
    I would not worry about using up your data plan if you have the 2GB, text iMessages are going to be very small and MMS (picture) ones are not very large either. Unless you are sending hundreds of picture iMessages a day you will have a hard time using up your data.
    If you are near an Apple Store you should explore signing up for an intro iPhone course and have them run through iMessage options.

  • Need help on how to use conference facility within adobe connect

    I need some help on how to use conference facility within adobe connect?

    I'd recommend you start here: Getting Started with Adobe Connect - Adobe Connect User Community

  • Need help please. When using Safari while banking online I cannot get rid of Pop ups although I have ticket no Pop ups. Any ideas ?

    Need your help please. When using Safari while banking online- I cannot get rid of the Pop ups although I have ticked the correct place. Any ideas ?
    A few months ago I downloaded a program someone suggested.

    Get Adblock or GlimmerBlocker.

  • Need help on Self Hosting Using channel Factory

    Hello,
         Need Help.
         I am trying to self host WCF service using cutom Channel Factory class. but I am getting exception.
     The scenario is something like below this  : -
    I want to create the endpoint connection to WCF service. I want to achieve this  using custom channel factory(not using default channel factory API provided in .Net Framework).
    I have written one class and it is derived from channel factory and we are reading the service endpoints, behaviors, bindings from external configuration file added in the project.
    I am able to connect to server side service hosted on different machine using following sample code successfully.
    In the case of “self-hosting”  I am receiving following error : --
         "There was an error reading from the pipe: The pipe has been ended. (109, 0x6d)."
    Below is the code which I have written for self hosting WCF service using custom channel factory.
    // Method where I am calling CustomChannel Factory constructor
    internal void ProxyCall(string msgEndpointConfigurationName, string url)
                string appConfigDirName, extConfigFilePath;
                FileInfo configFileInfo = new FileInfo(appConfigName);
                appConfigDirName = configFileInfo.DirectoryName;
                extConfigFilePath = appConfigDirName + "\\" + extConfigFileName;
                this.messageEndpointConfigurationName = msgEndpointConfigurationName;
                if (string.IsNullOrEmpty(url))
                    this.messageFactory = new CustomChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName);
                else
                   //EndpointAddress e = new EndpointAddress(url + ClientToServerOperations.ServiceAddress);
                   //this.messageFactory = new ChannelFactory<IServerOperationsMessage>(this.messageEndpointConfigurationName, e);
                   this.messageFactory = new CustomSelfHostingChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName, url + ClientToServerOperations.ServiceAddress);
                   //this.messageFactory = new CustomSelfHostingChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName, e);
       ClientMessageFormatterBehavior formatterBehavior = new ClientMessageFormatterBehavior();
       foreach (OperationDescription operation in this.messageFactory.Endpoint.Contract.Operations)
        if (!operation.Behaviors.Contains(typeof(ClientMessageFormatterBehavior)))
         operation.Behaviors.Add(formatterBehavior);
       this.messageFactory.Endpoint.Behaviors.Add(new MessageStatisticsBehavior());
       this.messageFactory.Open();
    // Custom Channel Factory Class
    internal class CustomSelfHostingChannelFactory<T> : ChannelFactory<T>
            /// Custom client channel. Allows to specify a different configuration file
            /// <typeparam name="T"></typeparam>
            private string configurationPath, selectedMsgEndPoint, uriAddress;
            public PPCCustomSelfHostingChannelFactory(string configurationPath, string selectedEndPoint, string uriAddress)
                : base(typeof(T))
                this.configurationPath = configurationPath;
                this.selectedMsgEndPoint = selectedEndPoint;
                this.uriAddress = uriAddress;
                EndpointAddress e = new EndpointAddress(this.uriAddress);
                base.InitializeEndpoint(selectedEndPoint,e);
            //As you can see, a call to the method InitialiazeEndpoint of the base class is required.
            //That method will automatically call to our CreateDescription method to configure the service endpoint.
            ///Loads the serviceEndpoint description from the specified configuration file
            protected override ServiceEndpoint CreateDescription()
                ServiceEndpoint serviceEndpoint = base.CreateDescription();
                return serviceEndpoint;
            private EndpointIdentity GetIdentity(IdentityElement element)
                EndpointIdentity identity = null;
                PropertyInformationCollection properties = element.ElementInformation.Properties;
                if (properties["userPrincipalName"].ValueOrigin != PropertyValueOrigin.Default)
                    return EndpointIdentity.CreateUpnIdentity(element.UserPrincipalName.Value);
                if (properties["servicePrincipalName"].ValueOrigin != PropertyValueOrigin.Default)
                    return EndpointIdentity.CreateSpnIdentity(element.ServicePrincipalName.Value);
                if (properties["dns"].ValueOrigin != PropertyValueOrigin.Default)
                    return EndpointIdentity.CreateDnsIdentity(element.Dns.Value);
                if (properties["rsa"].ValueOrigin != PropertyValueOrigin.Default)
                    return EndpointIdentity.CreateRsaIdentity(element.Rsa.Value);
                return identity;
            private Binding GetBinding(IBindingConfigurationElement configurationElement)
                if (configurationElement is CustomBindingElement) return new CustomBinding();
                else if (configurationElement is BasicHttpBindingElement) return new BasicHttpBinding();
                else if (configurationElement is NetMsmqBindingElement) return new NetMsmqBinding();
                else if (configurationElement is NetNamedPipeBindingElement) return new NetNamedPipeBinding();
                else if (configurationElement is NetPeerTcpBindingElement) return new NetPeerTcpBinding();
                else if (configurationElement is NetTcpBindingElement) return new NetTcpBinding();
                else if (configurationElement is WSDualHttpBindingElement) return new WSDualHttpBinding();
                else if (configurationElement is WSHttpBindingElement) return new WSHttpBinding();
                else if (configurationElement is WSFederationHttpBindingElement) return new WSFederationHttpBinding();
                return null;
            private Binding CreateBinding(string bindingName, ServiceModelSectionGroup group)
                BindingCollectionElement bindingElementCollection = group.Bindings[bindingName];
                if (bindingElementCollection.ConfiguredBindings.Count > 0)
                    IBindingConfigurationElement be = bindingElementCollection.ConfiguredBindings[0];
                    Binding binding = GetBinding(be);
                    if (be != null)
                        be.ApplyConfiguration(binding);
                    return binding;
                return null;
            private void AddBehaviors(string behaviorConfiguration, ServiceEndpoint serviceEndpoint, ServiceModelSectionGroup group)
                EndpointBehaviorElement behaviorElement = group.Behaviors.EndpointBehaviors[behaviorConfiguration];
                for (int i = 0; i < behaviorElement.Count; i++)
                    BehaviorExtensionElement behaviorExtension = behaviorElement[i];
                    object extension = behaviorExtension.GetType().InvokeMember("CreateBehavior", BindingFlags.InvokeMethod | BindingFlags.NonPublic | BindingFlags.Instance, null,
    behaviorExtension, null);
                    if (extension != null)
                        serviceEndpoint.Behaviors.Add((IEndpointBehavior)extension);
    Thanks in advance !! :-)

    Hi,
    There was an error reading from the pipe: Unrecognized error 109 (0x6d).
    One reason was inconsistent binding between client and server <netNamedPipeBinding> <security mode="None"></security>... (no
    communication)
    The other intermittent issue was time-out related.
    For more information, you could refer to:
    http://stackoverflow.com/questions/15836199/wcf-namedpipe-communicationexception-the-pipe-has-been-ended-109-0x6d
    http://stackoverflow.com/questions/22334514/wcf-named-pipe-error-the-pipe-has-been-ended-109-0x6d
    Regards

  • Need help about ref cursor using like table

    Hi Guys...
    I am devloping package function And i need help about cursor
    One of my function return sys_refcursor. And the return cursor need to be
    join another table in database . I don't have to fetch all rows in cursor
    All i need to join ref cursor and another table in sql clause
    like below
    select a.aa , b.cc form ( ref_cursor ) A, table B
    where A.dd = B.dd
    I appeciate it in advance

    My understanding is that you have a function that returns a refcursor and is called by a java app.
    Because this is a commonly used bit of code, you also want to reuse this cursor in other bits of sql and so you want to include it like table in a bit of sql and join that refcursor to other tables.
    It's not as easy as you might hope but you can probably achieve this with pipelined functions.
    Is it a direction that code should be going down? yes, eventually. I like the idea of pulling commonly used bits of code into a SQL statement especially into the WITH section, provided it could be used efficiently by the CBO.
    Is it worth the effort given what you have to do currently to implement it? possibly not.
    what else could you do? construct the sql statement independently of the thing that used it and reuse that sql statement rather than the refcursor it returns?
    Message was edited by:
    dombrooks

  • I am Stuck! Need Help With Multicast Streaming Using VLC Player

    I have a Multicast network topology shown below
    and my configs
    HUB ROUTER
    no ip domain lookup
    ip domain name primestarhotel.com
    ip multicast-routing
    interface Loopback0
    ip address 5.5.5.5 255.255.255.255
    ip pim sparse-dense-mode
    interface FastEthernet0/0
    ip address 200.0.0.2 255.255.255.240
    ip pim sparse-dense-mode
    ip virtual-reassembly
    speed 100
    full-duplex
    interface FastEthernet0/1.65
    description "Server Vlan"
    encapsulation dot1Q 65
    ip address 10.1.65.1 255.255.255.0
    ip pim sparse-dense-mode
    ip virtual-reassembly
    router ospf 200
    log-adjacency-changes
    network 5.5.5.5 0.0.0.0 area 0
    network 10.1.65.0 0.0.0.255 area 0
    network 200.0.0.0 0.0.0.15 area 0
    ip route 200.1.1.0 255.255.255.252 200.0.0.1
    ip route 200.2.2.0 255.255.255.252 200.0.0.1
    no ip http server
    no ip http secure-server
    ip pim send-rp-announce Loopback0 scope 6
    ip pim send-rp-discovery Loopback0 scope 6
    ISP ROUTER
    interface FastEthernet1/0
    interface FastEthernet1/1
    no switchport
    ip address 200.0.0.1 255.255.255.240
    ip pim sparse-dense-mode
    duplex full
    speed 100
    interface FastEthernet1/2
    no switchport
    ip address 200.1.1.1 255.255.255.252
    ip pim sparse-dense-mode
    duplex full
    speed 100
    interface FastEthernet1/3
    no switchport
    ip address 200.2.2.1 255.255.255.252
    ip pim sparse-dense-mode
    duplex full
    speed 100
    router ospf 200
    log-adjacency-changes
    network 200.0.0.0 0.0.0.15 area 0
    network 200.1.1.0 0.0.0.3 area 0
    network 200.2.2.0 0.0.0.3 area 0
    SPOKE 1 Router
    interface FastEthernet0/0
    ip address 200.1.1.2 255.255.255.252
    ip pim sparse-dense-mode
    speed 100
    full-duplex
    interface FastEthernet0/1
    no ip address
    ip pim sparse-dense-mode
    ip virtual-reassembly
    speed 100
    full-duplex
    interface FastEthernet0/1.12
    description "Workstation pc"
    encapsulation dot1Q 12
    ip address 10.1.12.1 255.255.255.0
    ip pim sparse-dense-mode
    router ospf 200
    log-adjacency-changes
    network 10.1.12.0 0.0.0.255 area 0
    network 200.1.1.0 0.0.0.3 area 0
    ip route 0.0.0.0 0.0.0.0 200.1.1.1
    SPOKE 2
    interface FastEthernet0/0
    ip address 200.2.2.2 255.255.255.252
    ip pim sparse-dense-mode
    speed 100
    full-duplex
    interface FastEthernet0/1
    ip address 10.2.22.1 255.255.255.0
    ip pim sparse-dense-mode
    speed 100
    full-duplex
    router ospf 200
    log-adjacency-changes
    network 10.2.22.0 0.0.0.255 area 0
    network 200.2.2.0 0.0.0.3 area 0
    ip route 0.0.0.0 0.0.0.0 200.2.2.1
    ip route 200.2.2.0 255.255.255.252 200.0.0.1
    I have implemented multicast on the network in a hub and spoke topology. i have set up ospf routing protocol and broadcast all network and can successfully ping.
    I am currently using VLC player as my media streaming server and client. i have set up rtp streaming from the HUb router using multicast ip 224.2.2.2 and unable to broadcast the multicast traffic across the spokes 1 and 2 PC's
    I have never used vlc player  never set up multicast network before and i am struggling with this and need help.
    these are my router configs below
    http://dl.dropbox.com/u/20145606/ip%20video%20config.txt
    Message was edited by: Louis Ojuwu

    I have edited the message and the configs and topology are visible above now. instead of the links i provided

Maybe you are looking for