Need help to develop report with column chart
Hi
I am new to SAP BO world.Could anyone please help me to design report with column chart.Please guide me how to develop report for the following requirement.I am not aware of variance columns and variance labels.Please provide some guidance or some tutorials(for column Chart) so that I can complete the task. Please reply me as soon as possible.Waiting for reply.Thanks in advance.
Type: Column Chart
u2022 Rows: Banking Asset Margin (%)
u2022 Start / End Columns: PY YTD Act(Prior year year to date); CY YTD Act(Current year Year to date)
u2022 Variance Columns: # Var (CY-PY Act) for GOLM; Volume; Rate; Non Banking NII; Banking Volatility in NII; Banking Volatility in OOI; Fees/One Offs/Other; Volatile Items; Sophie
u2022 Sub-total columns: PY YTD Underlying; CY YTD Underlying.
u2022 Variance Labels: % Var (CY-PY Act) for Total Income and Underlying Income
u2022 Sub-Total Labels: # Var (CY-PY Act) for Net Insurance Income; Banking Volatility; Other Operating Income
Additional information
u2022 Variance columns (bar) colours: Red = Adverse to Prior Year; Green = Favourable to Prior Year
u2022 Columns to show values. Adverse values to be shown in red text in brackets. Favourable results in black text.
u2022 All values in Black, but adverse to be shown below the bar.
Hi,
This type of question is almost impossible to answer over a forum .
You need to work with your business to understand what these requirements mean in terms of data modelling and relationships between object entities.
- Some of these metrics should be delegated to source, and calculated in the update routines to your datatargets (aka Cubes/Tables)
- Others could be resolved in the semantic layer (Universe)
- Other will be calculated in the presentation layer as local formulae or variables.
whilst BusinessObjects is a fairly intuitive tool, it may be unreasonble to expect a new learner to deliver an advanced report with conditional formatting.
Regards,
H
Similar Messages
-
Need help to create report with jpeg/gif image
Hello,
I need help with creating a form with a special jpeg/gif seal. I never done this Java. Until now, I created all forms with ansi C++ with HP escape characters to draw lines, boxs, and text. This form will contain boxes which is populated with database information read from a text file.
Since this form contains a special seal on the upper right, I don't think it can be done with old fashion ansi C++. How can I create a form with Java and create it as a simple exe to just print the form to a specified printer.
Thanks,
JohnHi,
I am creating a form with boxes (lines and text). What is special about this form is that it has an image jpeg or gif at the top right corner. Is is a state department seal. Up to this form, I had used ansi C++ and print out escape HP character to print out the lines, boxes, and text. I have no idea how to print out the image. I am new to JAVA and only 1 class in it. Is there sample code out there to create this type of form with the image? I need a starting point.
Thanks,
John -
Need help in developing report
Hi All,
I have to develop a report for vendor evaluation.
fields are like this: Vendor, Average price, price rating
Formula for price rating is :Price Rating = If Price of a Vendor for a material is lowest than weightage= 40
SecondLowestVendorforamaterial = WeightageofFirstLowest Vendor - (Avg.PriceofSecondVendor u2013
Avg.priceofFirst Vendor) / Avg.Priceoffirst vendor ) *100
Can anybody tell me how to implement this whole scenerio ???
Regards
ShwetaHi Shweta,
What I understand is you have calculated the avg price and displaying in the report. You now would like to display the report on Avg Price 'Ascending'.
I suggest,
1. You can use 'Condition' to display only those records with 'Top N' OR 'Bottom N' option on Avg Price.
2. You can use 'Exceptions' in the query design. Like Avg Price less than equal to 20 is 'GOOD1' Avg Price between 21 and 50 is 'Good 2' ... etc. Else
Hope this helps.
Regards,
RashmiG -
Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c
Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c. I need assistance on connecting these together so I can run a report. I am not an IT person so if someone could dumb it down it would be great.
Thanks,
NBGHealthHello,
I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
Let them know CR is ANSII 92 ODBC 3 compliant.
Thank you
Don -
Need help on Oracle Report format
Hi,
I need help on Oracle Reports. I am generating a report in excel sheet. I have a column which is 13 digit number (In database it is CHAR datatype). In excel sheet it showing some thing like 9.78381E+12. I want to show complete number like 9783805591331.
Also sometimes leading zero's are not showing when my column values is something like 0098794859583. I need to show the leading zero's as well in excel without losing them.
Below are the parameters i am using for the report
DESFORMAT=SPREADSHEET AND DESTYPE=FILE
My Oracle 9i developer version.
Any help on this would be much appreciated.
Thanks
KishoreAn additional quote string ' character with the number field will solve this problem but if u want to display this field in report then it will look ugly
'''||yourfield from table; check ur regional settings also
plz mark it helpful correct if it is -
Need help to develop Pythagoras theorem-
Hi i need help to develop proofs 2,3,4
of pythagoras theorems in java as demonstrations
These are applets can anyone help me with it or give me an idea of how to go about developing it -
the site is the following
http://www.uni-koeln.de/ew-fak/Mathe/Projekte/VisuPro/pythagoras/pythagoras.html
then double click on the screen to make it startPardon my ASCII art, but I've always liked the following, simple, geometric proof:
a b
---------------------------------------+
| | |
a| I | II |
| | |
---------------------------------------+
| | |
| | |
| | |
| | |
| | |
b| IV | III |
| | |
| | |
| | |
| | |
| | |
| | |
---------------------------------------+It almost goes without saying that I+II+III+IV == (a+b)^2, and II == IV == a*b,
I == a*a and III == b*b, showing that (a+b)^2 == a^2+a*b+a*b+b^2.
I hope the following sketch makes sense, stand back, ASCII art alert again: a b
---------------------------------------+
| . VI |
| . . |a
| V . |
| +
| |
| . |
b| . |
| |
| IX |
| . |
| . |b
| |
+ |
| . |
a| . . VII |
| VIII . |
---------------------------------------+
a bThe total area equals (a+b)^2 again and equals the sum of the smaller areas:
(a+b)^2 == V+VI+VII+VIII+IX. Let area IX be c^2 for whatever c may be.
V+VII == VI+VIII == a*b, so a^2+b^2+2*ab= c^2+2*a*b; IOW a^2+b^2 == c^2
Given this fundamental result, the others can easily be derived from this one,
or did I answer a question you didn't ask?
kind regards,
Jos -
hi friends i need help on classical reports,
sold-party,
material
sales and distrubitutation channel ,division,
incoming orders,order number,invoice ,credit,
i need sub totals and final total of invoice and each customer should display in new page .Hi
Use the Tables KNA1,VBAk,VBAP,VBRK and VBRP and design the report
see the sample report using KNA1,VBAK and VBAP.
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Reward points for useful Answers
Regards
Anji -
Exporting a report with a chart.
Post Author: Coleen
CA Forum: Other
Hello, I am using Delphi7 with CR XI. When I export a report
with a chart to a pdf in my development environment it works fine. But
when I distribute my application, the export works correctly except the
chart does not display. I am using Installshield to distribute
the following merge modules: CR11_rdc_license, CR11_rdc_reportengine,
and CR11_rdc_runtime. What am I missing? Thanks,ColeenHello Russell,
The Joint Time Frequency and Order Analysis Tool comes with example data. If you use the sample data, do you see the same behavior? Here are the steps I took:
Run the VBS script Time Frequency and Order Analysis 111.VBS to launch the tool.
Select New Data File
Select Noise data.tdms and Open. This is in the Sample Data folder in the tool's folder Time Frequency and Order Analysis 111
Set the Time Channel to "1 Time" and set the Signal Channel to "3 Noise_2"
Select Spectrum 3D CharDiag.TDR as the Report Templace.
Select Joint Time Frequency Spectrum as the Analysis Type.
Select Run Analysis. This will load the analysis data into a report
Double-click on the graph to open the 3D Axis Definition window
Select ... next to the Characteristic diagram to open the Curve Parameters window
Under the Interpolation tab, uncheck Interpolation. Click OK and close both dialogs. The graph will re-draw.
Go to File > Clipboard or press the Copy Graphic to Clipboard button.
Paste the image in Paint or Microsoft Word
With these steps, I do not get an error with the clipboard. Are you able to export to clipboard if using the sample data Noise data.tdms? Does copying to clipboard work with any data? I'm trying to determine if maybe a certain large or small set of data could be causing the issue, or if you always have this issue.
Taylor B.
National Instruments -
I need to see some sample source code of a report with column headings and detail data. I can't get my column titles in the header to line up with the detail no matter what I do. Can anyone spare me a good sample?
I have tried to use tables to specify both col headings and detail, but no chance to get them to line up. There has to be a way. I can't use the report builder because I need more control of when page breaks print, what data is on each line, etc. Hopefully some kind soul out there has a good sample.
Thanks!
DaveYour MBP is actually a mid-2010, not a 2008. That's what the 6,2 model indicates.There's an issue with the graphics module on that machine. There was a program in place to replace the motherboard within 3 years of purchase, but you're probably outside of that. Some folks have supposedly gotten theirs changed outside of that period, so you can try.
http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US
What you can do to use it is download gfxstatus from http:gfx.io and force the graphics to Intel. That would affect your work with Final Cut, but at least you might be able to use the machine. -
Library develop report with report painter in Cost Center Accounting
Dear experts!
Now, I'm getting some issue about finding library for developing report with report painter.
Really, i don't know libraries that are used to develop report with report painter for Cost Center Accounting.
Can tell me about them?
Help me, please.
Best regards, HuyHello Huy,
CCA reports would be based on table CCSS, you can go to transaction GRR2 and check the various libraries listed there and find a suitable one. You can also use libary 1AB which contains the various cost center variance reports or you can use transaction GR21 to create your own library.
Kind Regards // Shaubhik -
Need help in developing mobile app using SAP
Hi
I have a team of Android, iOS and Windows developers and we are planning to start developing mobile using SAP and SAP Fiori. Need help in getting started with SAP mobile development like i need plugins and development kits that i need to use.
Thanks
RamHi,
What help needed ?
For SAP Fiori Use this link : http://scn.sap.com/docs/DOC-41598
For SAP Fiori Installation and Configuration Steps: http://scn.sap.com/community/mobile/blog/2014/06/10/fiori-technical-installation-and-configuration-of-one-app-from-a--z
Which Software you will use to develop Mobile Apps in SAP Platform ?So that i will suggest what to do ..
Regards
Lokesh -
Need help in developing BADI for IT0001
Hi All,
I need help in developing BADI for IT0001.
On IT0001 create or change, there is need to update IT0017 with following data from IT0001
-Company Code
-Cost center
-Business Area
-Begin and End Date.
Other fields from IT0017 need to be derived from Position and update in IT0017.
Please guide me how I can address this. I do not want to go for dynamic action, as it is not getting evoked during background jobs.
I am new to BADI development and will appreciate step by step instructions.
ThanksHi,
follow the below steps to achive
Steps:
1. Execute Business Add-In(BADI) transaction SE18
2. Enter BADI name i.e. HRPAD00INFTY and press the display
button
3. Select menu option Implementation->Create
4. Give implementation a name such as Z_HRPAD00INFTY
5. You can now make any changes you require to the BADI within this
implementation, for example choose the Interface tab there are 3 methods avialble
6. Double click on the method you want to change, you can now enter
any code you require.
7. Please note to find out what import and export parameters a
method has got return the original BADI definition
(i.e. HRPAD00INFTY) and double click on the method name
for example within HRPAD00INFTY contract is a method
8. When changes have been made activate the implementation
<b>Reward points</b>
Regards -
Hi all.. Am working with Column chart, and am having uneven data with which i need to come out with coumn chart.
code is give below..
<?xml version="1.0"?>
<!-- Simple example to demonstrate the ColumnChart and BarChart controls. -->
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:custom="components.*">
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
[Bindable]
private var medalsAC:ArrayCollection = new ArrayCollection( [
{ Country: "USA", Gold: 35},
{ Country: "China", Silver:17},
{ Country: "Russia", Bronze: 14} ]);
]]>
</mx:Script>
<!-- Define custom colors for use as fills. -->
<mx:SolidColor id="sc1" color="yellow" alpha=".8"/>
<mx:SolidColor id="sc2" color="0xCCCCCC" alpha=".6"/>
<mx:SolidColor id="sc3" color="0xFFCC66" alpha=".6"/>
<!-- Define custom Strokes for the columns. -->
<mx:Stroke id="s1" color="yellow" weight="2"/>
<mx:Stroke id="s2" color="0xCCCCCC" weight="2"/>
<mx:Stroke id="s3" color="0xFFCC66" weight="2"/>
<mx:Panel title="ColumnChart and BarChart Controls Example"
height="100%" width="100%" layout="horizontal">
<mx:ColumnChart id="column"
height="100%"
width="100%"
paddingLeft="5"
paddingRight="5"
showDataTips="true"
dataProvider="{medalsAC}"
>
<mx:horizontalAxis>
<mx:CategoryAxis categoryField="Country"/>
</mx:horizontalAxis>
<mx:series>
<custom:extended
xField="Country"
yField="Gold"
displayName="Gold"
fill="{sc1}"
stroke="{s1}"/>
<custom:extended
xField="Country"
yField="Silver"
displayName="Silver"
fill="{sc2}"
stroke="{s2}"/>
<custom:extended
xField="Country"
yField="Bronze"
displayName="Bronze"
fill="{sc3}"
stroke="{s3}"/>
</mx:series>
</mx:ColumnChart>
<mx:Legend dataProvider="{column}"/>
</mx:Panel>
</mx:Application>
as per code... its showing graph as
If u notice the chart in each series, as there no proper data.. its showing that empty gap as per the order of column series created..
In array collection, in each object we are missing some value.
Any idea ow to remove this gap.. How to remove those empty spaces....
Thanks & Regards
PratapHi ramesh,
check out my edited version of Chandrashekhar Mahajan's fiddle
http://jsbin.com/jetoz/1/edit
Chandra was trying to create a new Dialog everytime which i've modified & chart inside a popup is a known issue which has been mentioned by SAP UI5 in Notes section. You can do a workaround by manually rerender() or setTimeout()
Regards
Sakthivel -
Creating custom reports with Pie Chart
Hello,
I've got a little problem while I'm creating custom reports with SQL Chart.
For example, I want to have a Pie Chart that represent the distribution of the version for a software, i wrote my query with no problem, the result is in good format.
My Pie Chart is fine except there are no percentage displayed. The legend on the right is fine with correct count of different version, but no percentage on the pie chart.
Any idea?
Thanks in advance,
FabHello,
well, I think this is not possible to ask OEM to print the percentage over the chart.
Anyway, I sugget you to rewrite your query to compute the % in the query itselft thus to have the pct displayed on the rigth.
Let's say you want to display the database files' size with such a query: select file_name name,bytes val from dba_data_files;
This is the way to display the % of each file size over the total (remark the above query has been embeded in the new one).
select name,ratio_to_report(val) over() pct
from ( select file_name name,bytes val from dba_data_files )
order by val desc
It is quite easy to adapt such a tip to your own query.
Regards,
Noel Talard -
I have misplaced my iPod Touch 4th Generation. According to Find my iPhone, it should show up in offline mode. I need help on locating it with a software or some other way. Help?
There is no other way.
Sorry
Maybe you are looking for
-
Why can't I use my WiFi on Windows 8.1?
I just installed Windows 8.1 on my mac mini running OS X 10.10. Bluetooth works fine, all my ports work fine... just WiFi. I know I can connect using Ethernet, but since I'm using a shared modem, I can't. Can anyone help me out?
-
How can i delete all my photos and music easily?
how can i delete all my photos and music easily? I have changed to a new macbook and given the old one to my partner (generous?) and want to delete a lot of my stuff on the old one (iphoto and itunes) without losing safari and mail data, settings etc
-
I have Iphone4 brought from at&t USA(carrier locked) and i am in india now, i contacted at&t and requested for an unlock for me to use with indian carriers. I got an email confirming the unlock has been completed from at&t and asked me to connect the
-
MobileMe Gallery and international characters
(May this serve as a warning to others.) I recently had trouble posting some vacation photos to a Gallery. My initial organization included a roll named Málaga (that's an accent on the first 'a'; it's a city in Spain). Later I organized other albums
-
Advantage of DMS over "Services for object" functionality
Hi Experts, I have got very basic doubt about advantages of DMS Over existing standard functionality of SAP. We can attach documents or files to SAP Objects using "services for object" push button ( Next to title bar). So please answer for my below q