NEED HELP TO FAX FROM MY PRINTER ASAP!
how do i start set up process to send a fax from my HP Photosmart D110a series printer?
Unfortunately The HP PhotoSmart D110a doesn't support the faxing feature. This printer only supports Print, Scan, Copy, ePrint, and print apps.
I work for HP but my posts and replies are my own thoughts.
If I have solved your issue, please feel free to provide kudos
Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.
Similar Messages
-
Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.
-
TS1389 I need help removing UAC from itunes..
I need help removing UAC from itunes so it will not allow me to open itunes. Everything I have read from other comments that you shouldn't turn off your user account control. I just to be able to open itunes. Can anyone help me with this problem?? Greg, ogrady612@yahoo,com
I had this problem too but you do not need UAC to be turned on.
Click on start and search for 'uac' in the search box at the bottom and click on 'Change User Account Control Settings' when it comes up. Move the slider to the bottom when the window appears and save the changes and your done!
It's worked for me and my uac has been off for months without causing me any problems!
Hope this helped -
Need help coping project from one computer to another.
I need help coping project from one computer to another. I loaded all video on computer 1, copied events and project folder to computer 2. I was told I only needed to copy the project folder back to computer 1 since the events folder is already there. I copied project folder back to computer 1 but the files wont open. I dont have computer 2 available.
Please help!!!Hi
No that's not the way to do it - iMovie gets confused and in some cases the problems might be un-repairable.
You've got several problems
• iMovie'08 - CAN NOT MOVE PROJCTS - You NEED iMovie'09 or iMovie'11 - I see no other working solution
• Never MOVE or alter any folder named
iMovie Projects - or -
iMovie Events
on DeskTop/Finder - This might be very harmful
• Moving (Projects) and Events - HAS TO be done within the iMovie Application.
You've got an Evets window and here You can view Your Events in two ways - Yearly - or - Yearly per Hard disk
Here You can move within this "window" to another location
• Projects - NO they do not contain Your full movie - only a document on howto use the material in Event folder
and there might be worse if You added Photos from iPhoto and Audio from iTunes/Garageband - then You have
to get this over to the second Mac too, to be able to continue editing.
So to move Your projects to another Mac You need
• iMovie'09 or 11
• an external hard disk -
MUST BE Mac OS Extended formatted - as UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO
Should be a FireWire one - as UBS/UBS2 performs badly when used for video
• Then move/copy over within Project resp Events window in iMovie Application
Hopefully I've been not to confusing or badly structured to be followed.
Yours Bengt W -
I need help removing CS3 from Windows 7 so I can reinstall
I need help removing CS3 from Windows 7 so I can reinstall
Before trying to remove try re-installing CS3 right on top of the current install. Often re-installing Photoshop on top of itself fixes the install. If it does be sure to apply the cs3 updates.
Download Adobe CS4 and CS3 Free Trials Here (incl. After Effects) | ProDesignTools
your product key can be retrieved from here https://www.adobe.com/account/my-products-services.html
use these links for the updates.
Adobe - Photoshop : For Macintosh
Adobe - Photoshop : For Windows -
Does cnf1415wnf scan or fax from the printer directly to an email?
Does cnf1415wnf scan or fax from the printer directly to an email?
Hi!
To scan:
You may press the start scan button on the printers control panel or use the HP solution center that must be installed in your computer to scan a document or photo.
Scan to email:
Some printers don't have the option in the control panel for scan to email. Mostly it is with the HP solution center software that should be installed in your printer.
Note:
For Windows the software is called HP solution center
For Mac it is called HP utility
*I am part of the HP family but I do have my own stand
*Clicking the Kudos at the left is highly appreciated
*Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
*Have a HP "Happy Printing" day! =) -
Please i need help with switch from the us store to malaysian store how i can switch
Please i need help with switch from the us store to malaysian store how i can switch
Click here and follow the instructions to change the iTunes Store country.
(82303) -
Need Help on choosing Color Laser Printer
Hello Everyone;
I am strugling to decide which Laser Colour Printer to buy, and I need some advice; I have the following options so far:
HP 2605dn
Brother HL-4070CDW
Oki C3400n
I only found here reviews for the HP, and they were mostly all negative, a lot of users complaining about the speed when printing in color.
But couldn't find reviews for the other two, only posts regarding the lack of drivers for them. Is there anyone who have used the above printers on a Mac succesfully?
Any comment would help. Can anyone review the Oki and/or the Brother printer?
This is what I need from my printer:
Relatively fast on a Mac
Duplex (is not a must but would be nice)
Wireless Printer (again is not a must, but it would be awesome)
Color printing
Basically I will use it at home for personal use: newsletters, some documents, etc.
Many Thanks!Take a look at the Canon line. By that, I mean the output.
-
I need help I can connect my printer to my router to use my printers with my mini I pad
I need help I have been trying for hours to connect my new e printer to my router ,to use with my ipad mini
Hi,
The simplest way to print wirelessly from your ipad is to download the HP eprint app and ensure that both your printer and device are connected to the same wifi network - once this is complete, you'll be bale to print wirelessly from within the eprint app.
Alternatively, you can use the wireless direct funtion of your printer by turining on the wireless button on the front of the printer. This allows the printer generate it's own wifi singal that you can connect to through any wireless device. To find the wireless password, simply hold down the wireless direct button for more than 3 secs and it will print the password on plain paper (make sure paper is loaded).
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" -
Need help in migration from Layer2 to layer3
HI Guys
Need u r help in migration from layer2 switched network to layer3.
here is the setup there are 9 sites connected with a 10gig backbone in a ring.each site has a 6513 but at the data centre site we having two 6513.we are having a combination of voice and data vlans.at present all the sites are connected with layer2 trunks.all the trunks are teminated at the core ie datacentre site.so how should i procedd and what are the advantages of it ie migration.
Thanks
MahmoodFor this migration you first need to assign IP addresses to your connections between switches. This could be /30 (or /31, if supported) subnets. You should also consider running some dynamic routing protocol such as OSPF between switches.
Hope this helps. -
I DESPERATLY NEED HELP TRANSFERING SONGS FROM IPOD TO ITUNES LIBRARY
hi my computer crashed downstairs and i need help moving all my songs from my ipod to my itunes library, on the other computer...will someone please help me?
Hello Markatkis,
Make sure your not connecting it to more than one PC. A new iPOd is set to "Auto Update" by default. With this setting all you do is plug the iPOd into the PC and iTUnes automaticly opens, loads all the songs it has listed in iTunes to the iPod, and after its done, ejects the iPOd.
If you connect it to another PC tho with iTUnes on it you usually get a promtp that in short says "iPOd library linked to another PC, do you want to link to this one" if you click yes, it wipes the iPOd clean and loads only whats on that PC.
Since your new to all of this a great place for you may be the "iPod 101" site. It will show you all the bacis ropes of using your iPOd, using iTUnes, and using them both together. http://www.apple.com/support/ipod101/ -
Desperately needs help burning DVD from iPhoto
I am using iPhoto 6.0.6. I desperately need help burning a DVD of a slide show that I created for my daughter's wedding.
I put several songs together by opening them and then combining them using QuickTime Pro. I imported the audio into iTunes and created a slide show using iPhoto. The slide show is perfect! The slides are finally in sink with the music just as I want them! But I don't know how to burn the slide show as a DVD.
I tried exporting the video from iPhoto to my computer, but at the end of the export, I get this message: please note that the music included in the slideshow can only be played on authorized machines. And when I try to play the video (after the export), most of the music on the video cannot be heard. When I try to authorize my machine, I am told that it's already authorized.
If someone would send detailed instructions on how to proceed, I would greatly appreciate it.
GregIs your problem the DRM audio tracks you purchased from iTunes store?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
I need help restoring data from my time machine.
1) On the time machine, where do I find the TRASH file that is located on the dock in my desktop? I'd like to restore that to a prior date but can't find it.
2) I DID A VERY BAD THING & need help to get back to where I was before. I wanted to delete files that were taking up lots of space. My OTHER section was using 160G. I downloaded OmniDiskSweep and found that 120G was being used by my virtual machine (I run Quicken in Windows, through VMware). I started to delete files that were called Snapshots assuming these were the snapshots that the program regularly takes of my files. Apparently they were not. I also deleted the program Windows XP Professional because that was never used. When I try to open VM or quicken program, it says it is missing a particular snapshot, i.e. Snapshot 11104. I deleted about 20 of these. I left all the other files that said Windows XP Home Edition. But now it shows that I only have the Professional Edition, even though that's what I deleted. I'm trying to restore from Time Machine and it looks like the information is not there - I've tried various different backups and nothing seems to have the information I need. The earliest back up I have is from 5/7 when I started time machine on a new external 1TB HD. Would that have the information I need since it's the very first back up? Please Help.I am assuming it's real data because it's taking up storage on my HD. It falls in the category "other" and the total of this section is 160G. Here is a snapshot of the virtual machine.
I also took a shot of the VM snapshots & it tells how much space is being taken up by the snapshots.
I've now changed the number of snapshots taken down to 12 (didn't know I had this option) & I can delete alot of the 21 snapshots that have already been saved. I have no idea how much of the HD was set aside for the VM because someone else installed it for me 5 years ago. I've had enough problems with it over the years that I've wanted to switch to Quicken for Mac or find another financial program to use. I've upgraded the VM 2x over the years, but didn't want to spend $100 for Version 5. I understand the concept of a VM but that's about all.
I did do the disk cleanup in Windows on the C drive. I deleted 700 MB of temporary files and then compressed 4G of data down to 2G. While the cleanup was progressing it said that the C drive was 30.99G and 78% of it was free. That just doesn't make sense to me. It recommended a defrag, so I did that also.
I'm pretty sure it's real data because I recently had to switch from a 320G external HD for TM, to a 1T HD. One TM backup was over 300G which I found to be excessive because I basically use my computer for mail, some word processing, and my financial data.
Thanks again for all your help. I really appreciate it. -
I need help please, upgrading from OS 10.6.8...
Please help me - I'm such a technophobe!! I need help upgrading from OS 10.6.8... I get part way through the process and get a box saying "The link needs to be opened with an application" and I don't know what to do next...
The only way to upgrade from 10.6.8 (which is high as Snow Leopard goes) is to obtain Lion or Mountain Lion from the Online Apple Store or Yosemite from the Mac App Store.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Yosemite (10.10.x) - which is free - unless you need to run specific software which will run on Mountain Lion only. Mavericks (10.9.x) is no longer available.
The requirements for Mountain Lion and Yosemite are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Yosemite is available from the Mac App Store (in Applications). Mountain Lion can be obtained the Online Apple Store.
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table -
Need Help:Reading Data from RU payroll cluster for table GRREC
Hi...
I need help on how to read data from RU cluster table for table GRREC for the employee & run date and get the value from structure PC292 .
Please let me know about the includes and the import and export statements to be used.
Thanks in advance,
RAVI.Hi,
Here goes pseudocode
Includes:
include: rpppxd00 ,
rpppxd10 ,
rpc2cd09 ,
rpc2rx02_ce , "if ldb pnp_ce is used else use the same include with out _ce
rpc2rx29 ,
rpc2rx39 ,
rpppxm00 ,
rpc2ruu0_ce ,
Declare:
DATA : i_rgdir LIKE pc261 OCCURS 0 WITH HEADER LINE ,
i_result TYPE pay99_result OCCURS 0 WITH HEADER LINE ,
i_grrec LIKE pc292 OCCURS 0 WITH HEADER LINE .
start-of-selection:
GET pernr.
Get the RGDIR VALUE for the current PERNR & selected Molga
get rgdir data TABLES i_rgdir
USING pernr-pernr
p_molga " parameter
CD-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-CU.
i_rgdir [] = rgdir[].
LOOP AT i_rgdir WHERE fpbeg LE pn-endda
AND fpend GE pn-begda
AND srtza EQ 'A'
AND void NE 'V'.
get_result_tabs TABLES i_result
USING 'RU' " US cluster
pernr-pernr
i_rgdir-seqnr
RX-KEY-PERNR = PERNR-PERNR.
UNPACK i_RGDIR-SEQNR TO RX-KEY-SEQNO.
RP-IMP-C2-RU.
i_grrec[] = i_result-inter-grrec[].
LOOP AT i_grrec.
case i_grrec.
use wage types required here and pass the data to output table.
endcase.
endloop.
endloop
end-of-selction.
Maybe you are looking for
-
Error in Asset Transactions Report in ECC 6
Hi Friends, We have upgraded from ECC 4.7 to ECC 6.0 in Nov 2007. In Asset Transactions Report (S_ALR_87012048) the Depreciation column is displaying Zero Values for individual line items after November 2007 (ie for Assets posted after Nov, 07). We p
-
How do I delay a picture change in Keynote beyond the 60 seconds allowed in the 'build' it procedure on the same slide?
-
Icon View in Finder using Yosemite
I currently upgraded to Yosemite from Mavericks, but I've noticed that when using Finder (and it defaults to opening files via Icon view) I don't see my files. When I switch to list or column view, I see my files. Anyone else having this problem?
-
Use of text Boxes to programmatically update a PDF form
Hello all; I am a very experienced programmer but I do not have much experience with PDFs , Acrobat, etc. I have come up with what I believe is my best solution based on what I have learned about PDFs and Acrobat. I am trying to do what seems , to me
-
Multiple Account assignemnet for Service PO
Hi Friends, I can understand that if multiple account assignment is selected in PO , then by default the GR Non Valuated indicator will be set. i.e. GR will be non valuated . no FI document created during GR But when I create service PO with item ca