Need HELP to find Eclipse IDE with Oracle Portlet Factory.
I want to start to develop oracle portlets without coding and I found that Oracle Portlet Factory is right technology for that. But I do not the best place to get info about installation of Oracle Portlet Factory based in Eclipse or somewhere else.
Hi,
Error might have occurred due to selecting only the OSM related modules.
Try again by selecting all the "Oracle Communications Service Studio Modules" and it should work.
Thanks,
BR, Harry
Similar Messages
-
Really need help on finding whats wrong with my internet please
Ok I now have Sky BB (not fibre normal). I have a black Sky hub, connected to my Apple Time Capsule (the flat type, think its 3rd Gen), the TC is in bridge mode, the Sky hub has wireless switched off.
I also use Powerline adapters from the TC to my iMac, also use numerous WiFi devices, iPhones, Apple TVs, iPads etc.
I keep getting intermittent "blips", drop outs, no connection, slow use etc, and I just can't get to the bottom of it. Really really appreciate some solid advice and help. Overtime its dropped (or I think it is), I can check Airport utility on my iPhone or iMac and shows all green, and internet connected, physically iy shows green to. The sky hi also shows connection on the hub, and if I goto the home page.
I've just had a drop/connection loss now, I've been into the logs on sky hub and nothing is shown, only form yesterday. I can't check the TC logs now, I have the old Airport utility that did used to show you, but it won't open now on 10.10.3.
I've reset powerline etc, but it doesn't seem to be that, as although iPhone shows connected to WiFi it doesnt connect to internet.
I believe the actual Sky end is ok, I goto into the sky hub home page 192.168.0.1, and shows connected, Sky have ran tests etc and all seems ok. What I'm wondering is if its the TC? I've had a few times now where the TC says has to restart backup as been a problem
thanksWhy down grade the firmware? What will that do/give me?
On the older units i find the earlier firmware more reliable.. The 7.6.4 introduced a number of new functions that work poorly on older AE and TC so it is simple to revert to older firmware and see..
It is a 3min exercise.. and might do nothing.. but you are trying to prove where an issue is.. this is part of that testing.
If I factory restore what will that do? I take it I can't use the backup settings to restore afterwards?
All routers need the occasional reset. Wrong settings creep in.. and particularly in situations where there is power outages or OS that works poorly (read Yosemite) then strange and wonderful things happen.
A backup of settings is only useful if it was taken before the problems started.. did you?? If not forget it and configure from scratch.. that is a key part of getting things to work.
Not sure what is meant by the use LAN port instead, thought I had to use the WAN if I connect it to my Sky hub?
When the TC is bridged.. it has no WAN port. There is no routing.. but I have found the LAN ports are more reliable than the WAN port.
With you saying about "only lasts a while" is it worth buying a new shape one refurbished from Apple? Are the newer shape any better reliability?
I would not buy a refurbished.. I doubt this model is understood very well and its issues happen in some situations and not others.. I think a lot of them are put back in stock without any sort of repair. They are tested .. found working and hence resold.. but the situation in people's homes is not a test lab. When people connect them to modems and routers that the device has issues with it fails again.
I find it hard to recommend the new one.. especially as it has now been out more than a year.. and firmware has not improved.
It is about refresh time and I would wait to see if a new one is coming.
If you need wireless buy a wireless router.. if you need backup use a local USB drive.
Repair of the TC is complicated.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
I figured this out long ago so they were already showing up with issues within 3 years.. if you get 4 or more years out of modern equipment.. that is beyond its design lifespan. -
Need Help FAST||! Big Problem with Oracle on Windows.
I have Oracle 9.2.0.6 on Windows 2003 Enterprise Edition SP2. My oracle SID in XRTY01PD. The OracleServiceXRTY01PD Startup Type is Automatic.
The Service starts but the database does not open. When I go to a command prompt and log into SQLPlus and connect using "/ as sysdba" I get connected to a idle instance. I tell it to Startup and it starts and opens no problem. No errors in the alter log or the event viewer.
I found a note: 1022458.6 dated 2007, that Oracle on NT has to have a 4 character SID. I can not believe that is this day and age I can only have 4 characters in the SID? Is this the case with Windows 2003? Does anyone know a work around for this?Hi Chris,
Take a look on this link:
- http://www.dba-oracle.com/oracle9iAS_tips_windows_service.htm
Cheers,
Francisco Munoz Alvarez
http://www.oraclenz.com -
I can no longer create new folders on my desktop. The option to do that is now light gray on the drop down menu and can't be selected.
I cannot drag new items onto desktop any longer either.
The Desktop in Finder opens with Terminal.
Folders and items on Desktop open and work normally.
Not sure if this has anything to do with upgrading to Mavericks but I need help if anyone has ideas.
Thank you.Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
Sometimes the problem may be solved just by logging out or rebooting. Try that first, if you haven't already done it. Otherwise, continue.
Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder or something else, such as Anything.
If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the Sharing & Permissions section. Then close the Info window and do as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
xattr -d com.apple.FinderInfo Desktop
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You should get a new line ending in a dollar sign (“$”). Quit Terminal.
Relaunch the Finder.
If the problem is now resolved, and if you use iPhoto, continue.
Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.) -
I need help to find my photo's please (2500) on my backup drive.Lost them after doing a clean install of Mountan Lion I have tried to find them but had no luck. I use Time Machine with a 1TB Western Digital usb drive. Thanking anyone in anticipation of a solution.
-Reece,
We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this? -
Need help for finding oracle payables tables
Hi,
I need help for finding tables relating fields INVOICE_ID, NOTIFICATION_ID and APPROVAL_STATUS or WFAPPROVAL_STATUS. I have searched a lot but has been unable to find any table containing all the above mentioned fields. I found the table WF_NOTIFICATIONS for INVOICE_ID, however have been unable to find the latest tables with INVOICE_ID and APPROVAL_STATUS as fields.
All the tables having this combination are either very old tables which are not used anymore or doesnt give the required data. Please let me know where am i going wrong. Once i get the required tables, i need to join the tables to get the required data with the imp fields. Also, the values of WFAPPROVAL_STATUS are not very clear to me. I need values for it as APPROVED, REJECTED AND INITIATED.Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan -
Need help in finding patterns and there counts
Hi All,
I need help in finding patterns as well as number of occurrences of those patterns in a table's column's data.
Consider sample data - one row's column from a table:
"S-S-S-P-S-B-S-S-C-S-P"
My requirement is:
I should get all the patterns that are followed by 'S'.
Example: for the above given data the patterns and counts are
SS - count is 3
SP - count is 2
SB - count is 1
SS - count is 1
There is one more condition for the above requirement:
If 'S' is followed by 'A', then 'SA' should not be considered as a pattern. The pattern should stretch until a non 'A' character is found.
Consider sample data for the above case:
"S-S-A-S-S-A-A-C-S-P-S-A"
for the above given data the patterns and counts are
SS - count is 2
SP - count is 1
SAS - count is 1
SAAC - count is 1
The data column is stored as VARCHAR2 type.
I have Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
Thanks in advance,
Girish GHi, Girish,
Girish G wrote:
Hi All,
I need help in finding patterns as well as number of occurrences of those patterns in a table's column's data.
Consider sample data - one row's column from a table:
"S-S-S-P-S-B-S-S-C-S-P"
My requirement is:
I should get all the patterns that are followed by 'S'.Do you mean "I should get all patterns that *start with* 'S'"?
Example: for the above given data the patterns and counts are
SS - count is 3
SP - count is 2
SB - count is 1
SS - count is 1Why are there two rows of output for 'SS'? What does the second one, with count=1, mean?
There is one more condition for the above requirement:
If 'S' is followed by 'A', then 'SA' should not be considered as a pattern. The pattern should stretch until a non 'A' character is found.
Consider sample data for the above case:
"S-S-A-S-S-A-A-C-S-P-S-A"
for the above given data the patterns and counts are
SS - count is 2
SP - count is 1
SAS - count is 1
SAAC - count is 1
The data column is stored as VARCHAR2 type.
I have Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit ProductionThanks; the version information is very helpful.
Thanks in advance,
Girish GWhenever you have a question, please post a little sample data (CREATE TABLE and INSERT statements) and the results you want from that data.
For example, your sample data might be:
CREATE TABLE table_x
( x_id NUMBER PRIMARY KEY
, txt VARCHAR2 (30)
INSERT INTO table_x (x_id, txt) VALUES (1, 'S-S-S-P-S-B-S-S-C-S-P');
INSERT INTO table_x (x_id, txt) VALUES (2, 'S-S-A-S-S-A-A-C-S-P-S-A');and the results you want from that data might be:
X_ID TXT PATTERN CNT
1 S-S-S-P-S-B-S-S-C-S-P SB 1
1 S-S-S-P-S-B-S-S-C-S-P SC 1
1 S-S-S-P-S-B-S-S-C-S-P SP 2
1 S-S-S-P-S-B-S-S-C-S-P SS 3
2 S-S-A-S-S-A-A-C-S-P-S-A SAAC 1
2 S-S-A-S-S-A-A-C-S-P-S-A SAS 1
2 S-S-A-S-S-A-A-C-S-P-S-A SP 1
2 S-S-A-S-S-A-A-C-S-P-S-A SS 2(This corresponds to what you posted, except that there is only one output row for 'SS' when x_id=1.)
One way to get those results in Oracle 11 is:
WITH got_s_cnt AS
SELECT x_id, txt
, REGEXP_COUNT (txt, 'S') AS s_cnt
FROM table_x
, cntr AS
SELECT LEVEL AS n
FROM dual
CONNECT BY LEVEL <= (
SELECT MAX (s_cnt)
FROM got_s_cnt
, got_pattern AS
SELECT s.x_id
, s.txt
, c.n
, REGEXP_SUBSTR ( REPLACE ( SUBSTR ( txt
, INSTR (s.txt, 'S', 1, c.n)
, 'SA*[^A]'
) AS pattern
FROM got_s_cnt s
JOIN cntr c ON c.n <= s.s_cnt
SELECT x_id
, txt
, pattern
, COUNT (*) AS cnt
FROM got_pattern
WHERE pattern IS NOT NULL
GROUP BY x_id
, txt
, pattern
ORDER BY x_id
, pattern
;At the heart of this query is the call to REGEXP_SUBSTR:
REGEXP_SUBSTR ( x
, 'SA*[^A]'
)which is looking for:
S = the letter S
A* = the letter A, repeated 0 or more times
[^A] = anything except the letter A -
Need help in finding the number of occurrences of a pattern.
Hi All,
I need help in finding the number of occurrences of a pattern in a table's column's data.
Consider sample data - one row's column from a table:
"S-S-S-A-S-S-P-S-S-B-S-A-P-S-S-C"
My requirement is:
I should get the count of S's which are immediately preceded by A or P.
for the above data i should get count as 3+2+1=6 (S-S-S-A, S-S-P, S-A)
The pattern data is stored as VARCHAR2 type.
Thanks in advance,
Girish G
Edited by: Girish G on Jul 21, 2011 11:22 PMI am sure there exists a better way then this one:
SQL> with dt as
2 (select 'S-S-S-A-S-S-P-S-S-B-S-A-P-S-S-C' str from dual)
3 SELECT SUM(Regexp_count(Regexp_substr(str, '(S\-?)+(A|P)+', 1,
4 Regexp_count(str, '(S\-?)+(A|P)+') - (
5 LEVEL - 1 )), 'S')) len
6 FROM dt
7 CONNECT BY LEVEL <= Regexp_count(str, '(S\-?)+(A|P)+')
8 /
LEN
6 -
Need help in finding mpeg2 component number to unlock key so I can burn a dvd?
Need help in finding mpeg2 component number to unlock key so I can burn dvd?? I have premiere elements 3.0
Thanks,
sylviaSylvia,
I cannot comment on PrE 3, as I did not start until PrE 4. With the latter, when one went to use one of the modules, they were automatically "registered." Based on comments in the Help file, I asked pretty much this same question, back then. All was done automatically, in PrE 4.
Maybe those, familiar with PrE 3, can be of help to you.
Good luck,
Hunt -
Need help. importing pictures to timeline with various length.
Need help cant find old toturial
I am trying to make a template for a picture movie where i have everything ready so i just need to add 250 pictures and then it will automaticly shift the pictures to the beat of the music. I once saw a toturial how to do this but cant find it. it was something with manually setting markers at the music beat and then just add all the pictures. but i must have missed something pls help..
BoIts called automate to sequence with unnumbered markers.
http://tv.adobe.com/watch/learn-premiere-pro-cs5/gs04-making-a-rough-cut-in-adobe-premiere -pro/
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d1ba .html -
Need help for finding objects impacted by size change for an infoobject
hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variablesHi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan -
I need help to find the serial number for Photoshop Elements 11
Hi! I need help to find the serial number for Photoshop Elements 11 I downloaded last year on Apple Application Store.. I have been using photoshop on mac for over a year and now need the serial number to be able to use it on macbook. I looked up Adobe's website for help but found none and noone to ask for support.. Any ideas how I can get the serial number using the App Sore bill I have?
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements -
Need help to find out link between process order and purchase order.
Hi All,
Need help to find out link between process order and purchase order.
We have purchase order, we can find out associated process order in MD09 (No Purchase Requisition found in Purchase order). When I tired to replicate this scenario with same material in system but not able to do.
Please suggest me what needs to check to get purchase order link to process order.. (this is not subcontracting )
Edited by: SAP PQ on Sep 26, 2011 5:24 PM
Thanks,
SAP PQ
Edited by: SAP PQ on Sep 26, 2011 5:24 PMMD09 is pegging. In SAP pegging is dynamic, meaning that there's no fixed link between purchase order and process order in your case.
This is why you did not get the same result when you tried again later.
Such a link can exist only if you do direct procurement for the order. -
I need help to find my iphone 5C. I have id apple but perhaps I can do more to find it. Please contact to ********
<Edited by Host>Hi Oliveira_Lisboa,
The article below has some information about the options and features available, it also has some tips that might help you locate your iPhone.
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/ht5668
If you lose your iOS device or think it might be stolen, these steps may help you locate it and protect your personal data.
If you enabled Find My iPhone on your missing device
These steps require that Find My iPhone was enabled on your device before it was lost or stolen.
Attempt to locate your device using Find My iPhone at icloud.com/find, or using the free Find My iPhone app.
Put the device in Lost Mode to set a 4-digit passcode and display a custom message with your phone number on your device. While the device is in Lost Mode, you can also keep track of changes to your device's location. Lost Mode requires that your missing device be using iOS 6 or later. If your device is using iOS 5, you can still lock your device remotely and display a message on the screen.
If you want to delete all of your personal information from your missing device, you can erase it remotely. Please note that when you erase a device, you will no longer be able to locate it.
Report your lost or stolen device to local law enforcement and your wireless carrier. Apple doesn't track or flag lost or stolen products, but you can use My Support Profile (supportprofile.apple.com) to find a list of serial numbers for products that you've purchased or registered with your Apple ID.
Note: If your missing device is offline, you can still put it in Lost Mode, lock it, or erase it. Your commands will take effect when the device comes back online.If you did not enable Find My iPhone on your missing device
If you did not enable Find My iPhone before it was lost or stolen, you can't use it to locate or protect your device, but you can still follow these steps:
Change your iCloud password to ensure that no one else can use your device to delete or make changes to your iCloud data.
Report your lost or stolen device to local law enforcement and your wireless carrier. Apple doesn't track or flag lost or stolen products, but you can use My Support Profile (supportprofile.apple.com) to find a list of serial numbers for products that you've purchased or registered with your Apple ID.
Additional Information
Visit iforgot.apple.com/appleid if you need help remembering your Apple ID.
-Jason -
I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?
What file format did you export it to?
Maybe you are looking for
-
Problem with Tab Key in JFileChooser when Details view is selected.
Hi all, Iam using a JFileChooser in my application.When i click Details option in the JFileChooser the files with the size,Type and modified date are displayed. When i am using tab to navigate through the JFileChooser,when the tab enters the area whe
-
Can Bridge label images in Finder?
I want the images I've selected in Bridge - sorted by Rating - to have a color label when I view them in a folder in Finder. Currently I just manually label each one in Finder with the Bridge window open. is there a better way?
-
How do I achieve this effect please?
I would like to create text boxes on the page with curved edges like ths, how is this done please?
-
Pacman error with "/usr/share/man exists in filesystem"
I'm installing archlinux. Follwing beginners guide, I'm now installing some booting packages, dosfools,efibootmgr, grub. Install Boot loader But every time I type pacman -S grub it makes error error: failed to commit transaction (conflicting files) g
-
how do i authorize my computer