Need help to find link to external AS2 file

I have purchased an image gallery program that works fine but I am struggling to make a very minor modification. I have asked the author for assistance but previous requests have met with no response so I am also asking my question here.
This program has most of its logic in an external AS2 file. I have made some small changes to this file and want to save it under a new name. However, that would also require me to change the reference to the external AS2 file from within the fla file. That's where my problem lies. I can't find any code in the fla that contains such a reference.
If I try to publish an swf without this file in the required location it causes a compiler error thus proving that there must be a reference somewhere to that file. However, doing a search for this AS2 file in the 'current document' when viewing the fla file in Flash CS4 produces no results. Where else could this reference be hidden?
David

Unfortunately, the Movie Explorer window does not show class references of the type under discussion. I guess an alternative way to reference this external file might be via an include statement in an action, which would make it a lot easier to find than when it is hidden in the properties box of a library symbol.
However, the Movie Explorer appears to be a useful facility for finding and searching timeline actions so thanks for bringing it to my attention. I used it for a brief exploration of another fla file with lots of code scattered all over the place.
Thanks again for all your help.
David

Similar Messages

Need help with classpath configuration for external jar files

We have coded our own JAAS login module, and it uses classes located in jar files, and these jar files were not created using SAP dev studio, e.g. they were provided by a third party vendor as a set of tools.
So, how do we deploy these jar files so that our SAP JAAS login module can find them ? We found we can run consoleconfig.sh to change the classpath which SAP J2EE engine uses, but we wondered if there was a better way to do this. Of course, if the jar files were created by us, we can include them in the dev studio project and they would be deployed using SDM, and this would not require any changes to classpath using consoleconfig.sh
Thankyou in advance for your help.

I noticed nobody has sent any feedback on this yet, so I wondered if I have posted to the wrong forum ? Any thoughts on this ?
Thanks,
Tim

Need help with multiple links in one Flash file

Hi, I have to do a banner which is basically 4 different
slides that fade up and down, but the client wants each slide to
link to a different place when the user clicks on it. I know how to
create an invisible button to link the whole ad, but how would I
link each slide? Thanks in advance!

Am I getting no replies because this can't be done in Flash?
Is there a better way to do it? Actionscripts perhaps?
BTW, I'll have no access to the html page that the client
will be putting the swf file on so I wouldn't be able to put any
code around the file for linking, like if I did a bunch of jpg's
and found a script on the web somewhere that would fade them up and
down and link them. They want the linking built right into the swf,
is this even possible? Thanks in advance!

Need help to find out link between process order and purchase order.

Hi All,
Need help to find out link between process order and purchase order.
We have purchase order, we can find out associated process order in MD09 (No Purchase Requisition found in Purchase order). When I tired to replicate this scenario with same material in system but not able to do.
Please suggest me what needs to check to get purchase order link to process order.. (this is not subcontracting )
Edited by: SAP PQ on Sep 26, 2011 5:24 PM
Thanks,
SAP PQ
Edited by: SAP PQ on Sep 26, 2011 5:24 PM

MD09 is pegging. In SAP pegging is dynamic, meaning that there's no fixed link between purchase order and process order in your case.
This is why you did not get the same result when you tried again later.
Such a link can exist only if you do direct procurement for the order.

I need help with finding right stylus pen for lenovo yoga 2 pro!

I did read other person's post, but I did not find my answer. I am currently using my fingers to write my notes and it drives me nuts! I do have a stylus pen that have huge round fabric tip. It does not write well. I want a stylus pen with pointy end so I can acturally take my notes on OneNote. I writes equations down so it is very hard to write small and neat with my hand. I do know that my laptop is touch sensitive so it only works with rubber or fabric tips! I could not find any stylus pen with those tip that are pointy.... I need help on finding pointy tipped stylus pen that will let me write well. I am ordering ati-glare screen protector because I can see myself on the screen like a mirror... lol Hopefully this will not keep me from finding a pen that works well! Please give me link to the pen, if you can! Thank you for reading!

ColonelONeill is correct.
The Yoga 2 Pro does not have a digitizer, so a capacitative stylus, which mimics a fingertip, is what you'd need.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

Need help to find photo's on my backup drive,since installing Mountain Lion cannot find where they are stored.The backups after ML install are greyed out except in Applications, MyFiles and Devices really welcome a hand with this please.

I need help to find my photo's please (2500) on my backup drive.Lost them after doing a clean install of Mountan Lion I have tried to find them but had no luck. I use Time Machine with a 1TB Western Digital usb drive. Thanking anyone in anticipation of a solution.

-Reece,
We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this?

Need help in finding the number of occurrences of a pattern.

Hi All,
I need help in finding the number of occurrences of a pattern in a table's column's data.
Consider sample data - one row's column from a table:
"S-S-S-A-S-S-P-S-S-B-S-A-P-S-S-C"
My requirement is:
I should get the count of S's which are immediately preceded by A or P.
for the above data i should get count as 3+2+1=6 (S-S-S-A, S-S-P, S-A)
The pattern data is stored as VARCHAR2 type.
Thanks in advance,
Girish G
Edited by: Girish G on Jul 21, 2011 11:22 PM

I am sure there exists a better way then this one:
SQL> with dt as
2 (select 'S-S-S-A-S-S-P-S-S-B-S-A-P-S-S-C' str from dual)
3 SELECT SUM(Regexp_count(Regexp_substr(str, '(S\-?)+(A|P)+', 1,
4                                     Regexp_count(str, '(S\-?)+(A|P)+') - (
5                                                  LEVEL - 1 )), 'S')) len
6 FROM   dt
7 CONNECT BY LEVEL <= Regexp_count(str, '(S\-?)+(A|P)+')
8 /
       LEN
         6

Need help in finding mpeg2 component number to unlock key so I can burn a dvd?

Need help in finding mpeg2 component number to unlock key so I can burn dvd?? I have premiere elements 3.0
Thanks,
sylvia

Sylvia,
I cannot comment on PrE 3, as I did not start until PrE 4. With the latter, when one went to use one of the modules, they were automatically "registered." Based on comments in the Help file, I asked pretty much this same question, back then. All was done automatically, in PrE 4.
Maybe those, familiar with PrE 3, can be of help to you.
Good luck,
Hunt

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Need help for finding oracle payables tables

Hi,
I need help for finding tables relating fields INVOICE_ID, NOTIFICATION_ID and APPROVAL_STATUS or WFAPPROVAL_STATUS. I have searched a lot but has been unable to find any table containing all the above mentioned fields. I found the table WF_NOTIFICATIONS for INVOICE_ID, however have been unable to find the latest tables with INVOICE_ID and APPROVAL_STATUS as fields.
All the tables having this combination are either very old tables which are not used anymore or doesnt give the required data. Please let me know where am i going wrong. Once i get the required tables, i need to join the tables to get the required data with the imp fields. Also, the values of WFAPPROVAL_STATUS are not very clear to me. I need values for it as APPROVED, REJECTED AND INITIATED.

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

I need help in finding a free update for my windows 7.5 mobile

I need help in finding a free update for my mobile 7.5 windows phone
Message was edited by: chevycamer427

http://www.windowsphone.com/en-us/store/app/adobe-reader/bc4f319a-9a9a-df11-a490-00237de2d b9e
[topic moved to Windows Phone subforum]

I need help in finding all the new fontsin iPad 2 using iOS 5

I need help in finding all the new fonts in ipad 2 using ios 5

You cannot change the email font. You can make it bold, italics and underline the type, but Helvetica is your only choice in the mail app.
In the notes app you have 3 choice Noteworthy, Helvetica and Marker Felt. The font can be changed in Settings>Notes>Font.
You can only use fonts that are built into the app that you are using at the time. You cannot pick and choose fonts from a list of all of the fonts that may be on the iPad but only from the list of fonts that the app allows.

I need help to find the serial number for Photoshop Elements 11

Hi! I need help to find the serial number for Photoshop Elements 11 I downloaded last year on Apple Application Store.. I have been using photoshop on mac for over a year and now need the serial number to be able to use it on macbook. I looked up Adobe's website for help but found none and noone to ask for support.. Any ideas how I can get the serial number using the App Sore bill I have?

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

Need help on folders in thumbdrive, external harddisk become shortcut and original folder become hidden

hi
I would like to ask whether does Microsoft have a solution on this issue
need help on folders in thumbdrive, external harddisk become shortcut and original folder become hidden. and there will be a Recycler hidden folder, inside is a randomName.exe file(with a lady image as the program icon). Once the user click on the
shortcut of the folders, it will activate the .exe file and install onto Windows and with any pendrive, external harddisk plug to the infected machine all will be affected when plug to a clean machine and the cycle repeat itself.. by infect other
clean machine.
Please help as this is affecting my company of 400+ users! on window 7 pro x86 and x64
the problem is that we have a lot of pen drive, portable external harddisk using in the office..
thus is there 1 Microsoft patch to solve this issue once and for all... to prevent the autorun to activate?
Jaslena

the problem is that we have a lot of pen drive, portable external harddisk using in the office..
is there 1 Microsoft patch to solve this issue once and for all... to prevent the autorun to activate?
This is just because of infection is propagated.. As a result files are hidden.. attrib is great as it is suggested by S Guna . May be you can make a batch file or something like that? But there is a chance of reinfection if you don't clean your infected
systems as well as your pendrives..
Plug your infected flash drive and
Use one scanner at a time
Download hitman pro 3.7 (shareware and can be activated for 30 days free)and have a full system scan including your pendrive.. http://www.surfright.nl/en
And/or
use malwarebyte have a full system including your pendrivescan http://www.malwarebytes.org/products/malwarebytes_free/
And/or
Use Kaspersky Virus Removal Tool downloaded from uninfected pc and transfer to you pc and install and have a full system scan
http://www.kaspersky.com/antivirus-removal-tool?form=1
If everything fails, you can use offline bootable resccue cd and do a full system scan...
https://support.kaspersky.com/viruses/rescuedisk
http://windows.microsoft.com/en-us/windows/windows-defender-offline-faq
or hitman kickstart bootable pendrive
http://www.surfright.nl/en/kickstart
Then
(1)Check whether your files are hidden.. Most of the time files and folders are hidden as a result of pen drive malware infection..
It will change the attributes of the files/folders.
In that case u can use attrib command and
attrib -s -h -a -r
This is how it is used.. attrib method is common for windows
http://www.pcandtablet.com/windows-7-errors-and-crashes/191/i-cant-view-my-pendrive-contents-in-my-laptop-when-i-plug-pen-drive-and-open-it-it.html
(2)If data is deleted you can try recuva.. freeware to recover data.
http://www.pcandtablet.com/windows-8-1-software/1302/how-can-i-recover-shift-del-file-or-file-after-emptying-recycle-bin-in-windows-8-1-a.html
Hetti Arachchige V Aravinda | Network Administrator (B.Sc, MCP, MCTS, MCSA, MCSE, MCITP, CCNA, CEH, MBCS)| http://www.windowstechinfo.com |

Need help to find link to external AS2 file

Similar Messages

Maybe you are looking for