Need help to find print graphics program compatible w/snow leopard

Now that it's clear my Print Explosion 3.0.2.8 program is thoroughly incompatible with snow leopard (Nova support over the phone: "we're working on a fix" and "hoping for one" but can't tell you if, when, or how we'll notify anyone if we succeed on 12/9/09), what compatible programs are there for 10.6.2? I read of issues with Print Shop 2, so don't want to plonk down more money after bad. Recommendations? Fixes? Suggestions? My usage is for things like signs, posters, cards, invites. Thanks.

Posterino, among others, seems like a good candidate. Perhaps Apple Pages would work too.

Similar Messages

Need help to find printer setup utility

I recently bought my first Mac and have slowly been adding to it over the last couple of weeks. Today I added a new printer that I wish to connect wirelessly. The printer is a Brother MFC-3360. I installed the software that came with the printer and had the printer connected directly to the Mac Book. It printed just fine.
I then disconnected the USB cable and plugged it into the Extreme Base station. It failed to print. According to the Extreme manual, I need to open printer setup utility, located in the utilities folder in the applications folder. Then from there I need to add the printer.
The problem is, I have no printer setup utility. Is there another place where it might be located?
Any other ideas will be much appreciated. Thank you!

Found problem. Went to Sys prefs -> Printers and Fax -> removed my printer and re-installed. Works like a charm.

Pages 09 not printing graphics since updating to snow leopard

I've updated to 10.6.2 but I am unable to print templates with graphics to my Xerox 6520 DP printer. Reloaded the drivers but still not working. Will go ck with Xerox to see if they are issuing a new release driver or not. I tried opening a template within Pages and I get the same result of "error printing" no number along with it. Tried doing a save as PDf and get the same printing error. Anyone have any ideas?

Repair permission is something I do after a major installation. Do that.
Are you able to print from other applications, i.e. TextEdit?
If not, can you print from another account? You can create a new account from Accounts in the System preferences.
It might be the driver that needs an update but that is outside my knowledge.

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

Need help to find photo's on my backup drive,since installing Mountain Lion cannot find where they are stored.The backups after ML install are greyed out except in Applications, MyFiles and Devices really welcome a hand with this please.

I need help to find my photo's please (2500) on my backup drive.Lost them after doing a clean install of Mountan Lion I have tried to find them but had no luck. I use Time Machine with a 1TB Western Digital usb drive. Thanking anyone in anticipation of a solution.

-Reece,
We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this?

I need help getting my printer to work

I need help getting my printer to work

http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Need help in finding the number of occurrences of a pattern.

Hi All,
I need help in finding the number of occurrences of a pattern in a table's column's data.
Consider sample data - one row's column from a table:
"S-S-S-A-S-S-P-S-S-B-S-A-P-S-S-C"
My requirement is:
I should get the count of S's which are immediately preceded by A or P.
for the above data i should get count as 3+2+1=6 (S-S-S-A, S-S-P, S-A)
The pattern data is stored as VARCHAR2 type.
Thanks in advance,
Girish G
Edited by: Girish G on Jul 21, 2011 11:22 PM

I am sure there exists a better way then this one:
SQL> with dt as
2 (select 'S-S-S-A-S-S-P-S-S-B-S-A-P-S-S-C' str from dual)
3 SELECT SUM(Regexp_count(Regexp_substr(str, '(S\-?)+(A|P)+', 1,
4                                     Regexp_count(str, '(S\-?)+(A|P)+') - (
5                                                  LEVEL - 1 )), 'S')) len
6 FROM   dt
7 CONNECT BY LEVEL <= Regexp_count(str, '(S\-?)+(A|P)+')
8 /
       LEN
         6

Need help in finding mpeg2 component number to unlock key so I can burn a dvd?

Need help in finding mpeg2 component number to unlock key so I can burn dvd?? I have premiere elements 3.0
Thanks,
sylvia

Sylvia,
I cannot comment on PrE 3, as I did not start until PrE 4. With the latter, when one went to use one of the modules, they were automatically "registered." Based on comments in the Help file, I asked pretty much this same question, back then. All was done automatically, in PrE 4.
Maybe those, familiar with PrE 3, can be of help to you.
Good luck,
Hunt

Need help in my assignment, Java programing?

Need help in my assignment, Java programing?
It is said that there is only one natural number n such that n-1 is a square and
n + 1 is a cube, that is, n - 1 = x2 and n + 1 = y3 for some natural numbers x and y. Please implement a program in Java.
plz help!!
and this is my code
but I don't no how to finsh it with the right condition!
plz heelp!!
and I don't know if it right or wrong!
PLZ help me!!
import javax.swing.JOptionPane;
public class eiman {
public static void main( String [] args){
String a,b;
double n,x,y,z;
boolean q= true;
boolean w= false;
a=JOptionPane.showInputDialog("Please enter a number for n");
n=Double.parseDouble(a);
System.out.println(n);
x=Math.sqrt(n-1);
y=Math.cbrt(n+1);
}

OK I'll bite.
I assume that this is some kind of assignment.
What is the program supposed to do?
1. Figure out the value of N
2. Given an N determine if it is the correct value
I would expect #1, but then again this seem to be a strange programming assignment to me.
// additions followI see by the simulpostings that it is indeed #1.
So I will give the tried and true advice at the risk of copyright infringement.
get out a paper and pencil and think about how you would figure this out by hand.
The structure of a program will emerge from the mists.
Now that I think about it that advice must be in public domain by now.
Edited by: johndjr on Oct 14, 2008 3:31 PM
added additional info

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Need help for finding oracle payables tables

Hi,
I need help for finding tables relating fields INVOICE_ID, NOTIFICATION_ID and APPROVAL_STATUS or WFAPPROVAL_STATUS. I have searched a lot but has been unable to find any table containing all the above mentioned fields. I found the table WF_NOTIFICATIONS for INVOICE_ID, however have been unable to find the latest tables with INVOICE_ID and APPROVAL_STATUS as fields.
All the tables having this combination are either very old tables which are not used anymore or doesnt give the required data. Please let me know where am i going wrong. Once i get the required tables, i need to join the tables to get the required data with the imp fields. Also, the values of WFAPPROVAL_STATUS are not very clear to me. I need values for it as APPROVED, REJECTED AND INITIATED.

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

I need help in finding a free update for my windows 7.5 mobile

I need help in finding a free update for my mobile 7.5 windows phone
Message was edited by: chevycamer427

http://www.windowsphone.com/en-us/store/app/adobe-reader/bc4f319a-9a9a-df11-a490-00237de2d b9e
[topic moved to Windows Phone subforum]

I need help in finding all the new fontsin iPad 2 using iOS 5

I need help in finding all the new fonts in ipad 2 using ios 5

You cannot change the email font. You can make it bold, italics and underline the type, but Helvetica is your only choice in the mail app.
In the notes app you have 3 choice Noteworthy, Helvetica and Marker Felt. The font can be changed in Settings>Notes>Font.
You can only use fonts that are built into the app that you are using at the time. You cannot pick and choose fonts from a list of all of the fonts that may be on the iPad but only from the list of fonts that the app allows.

I need help to find the serial number for Photoshop Elements 11

Hi! I need help to find the serial number for Photoshop Elements 11 I downloaded last year on Apple Application Store.. I have been using photoshop on mac for over a year and now need the serial number to be able to use it on macbook. I looked up Adobe's website for help but found none and noone to ask for support.. Any ideas how I can get the serial number using the App Sore bill I have?

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

I need help with finding right stylus pen for lenovo yoga 2 pro!

I did read other person's post, but I did not find my answer. I am currently using my fingers to write my notes and it drives me nuts! I do have a stylus pen that have huge round fabric tip. It does not write well. I want a stylus pen with pointy end so I can acturally take my notes on OneNote. I writes equations down so it is very hard to write small and neat with my hand. I do know that my laptop is touch sensitive so it only works with rubber or fabric tips! I could not find any stylus pen with those tip that are pointy.... I need help on finding pointy tipped stylus pen that will let me write well. I am ordering ati-glare screen protector because I can see myself on the screen like a mirror... lol Hopefully this will not keep me from finding a pen that works well! Please give me link to the pen, if you can! Thank you for reading!

ColonelONeill is correct.
The Yoga 2 Pro does not have a digitizer, so a capacitative stylus, which mimics a fingertip, is what you'd need.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Need help to find print graphics program compatible w/snow leopard

Similar Messages

Maybe you are looking for