Need help to find user exit

I have two requirements like
1.When the SAP Sales Order is shipped a SAP iDoc DESADV will be triggered. Note This idoc already exists.
2. On the generation of a Shiping Document Reversal (Trans code VL09) and Idoc will be created
I want to get the user exits for both the cases.

If output determination is set up correctly you shouldn't need user exits for that.
P.S. Wrong forum.

Similar Messages

Help to find user exit/BADI in cj20n to save requisitioner as use name

Hi,
I have requirement in cj20n. Please help me to find user exit or BADI for cj20n which saves requisitioner as user name automatically.
Thanks,
Roshani.

Hi,
Check this BADI : WORKORDER_CONFIRM.
Goto SE18 ---> Give the above BADI name. If you want to create go to SE19 and use the above definition to create.

Need help urgently in user exit

Hi experts,
i m new to the concept of user exit.
shud anyone have very good coding knowledge for doing uiser exit.
i havent got a clear idea about my specification.
problem: one of the sd transaction code (dnt know the transaction code)) there is a tabstrip or table control window.In that windoww i m supppose to add one more column.
This is an idea that i recieved from the sd consultant, i havebnnt recieved my spec yet.
pls p[ls help me.
i need to perform this task very well so pls guide me
will reward for sure
sincerely
jay

Hi Jaya
For using USER EXISTS you need Access Key from SAP.If you know the TCODE follow the procedure given below.
->enter TCODE in command field
->enter
->System(Menu item)
->Status(in drop down list)
->Double click on Program(screen) name
->you will find empty INCLUDE programs under commented heading USER EXISTS.
->Read the Description given for each INCLUDE and select the required one.
->Double click on hte INCLUDE.
You'll see a pop-up asking for access key, which we should get from SAP.Without Access Key you cannot use USER EXISTS.
Regards
Lakshman

Need help in PBEN0011 user exit

Hello Experts,
I am using EXIT_SAPLHRBEN00GENERAL_011 FM of PBEN0011 user exit to calculate the coverage amount.But in my requirement i have to calculate that based on the PA0008-TRFST(pay scale level).But in this user exit there is pernr field in import parameters.
I need perner to read the pay scale level for that employee.
Please help...is there any way to access the screen fileds like pernr ,begda,endda in the user exit if they are being passed to the user exit.
Thanks in advance..
Shweta

Hello All,
I want to copy all queries under one infoset and user group to new infoset.I tried copying using copy function vaialable in goto menu.But it is giving error for the query having varian.
I am unable to copy the queries with variants. And I am getting following message:
Error when copying query report XXXXXXX= with variants. Error when importing query
Please help...
Thank you in advance
Shweta

Need help with transporting User Exit Variable in CMOD ZXRSRU01

Hello Gurus.,
I changed the existing user exit variable in CMOD ZXRSRU01.,before changing neither it ask for any transport request, nor when I activated the include program .
Well., I tried this........I went to goto-> Object Directory Entry.,
changed the Package and person responsible for and then it asked for transport request...but this dint work...
Now., how can I capture the changes in a transport request, so that, i can move the changes to production system?
is there anyway to solve my problem?
Regards,
PNK

Thanks for ur help VIKRAM...i solved the issue...the changes are captured in someother request, but it was not showing in the Version Management.'
I checked the Lock Overview in the Object DIrectory Entry and found out that it was capturing in different request. I released the request and when I tried to change the code, it asked for new transport request.
It worked..
Thanks for your help..
Regards,
PNK

Need help in finding tcode - in user exits

hi experts
in user exits, i can find many exits name using SPRO or SMOD. and by this i can find the package also.
my question is how to know where these exits are exactly used, ie., in which transaction these exits are used.
is there any way to find out the tcode, if we know exit name.
thanks
akila

Hi
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
Reward points for useful Answers

Help me to find user exit for MB1B

IN MB1B TRANSACTION I WANT ONE FIELD LIKE REASON FOR TRANSFER APPEAR IN THE FIRST SCREEN ONLY WHEN I AM ENTERING PARTICULAR MOVEMENT TYPE,PLANT AND STORAGE LOCATION.HELP ME TO FIND USER EXIT FOR THIS
Message was edited by:
 neela renganathan

THIS FIELD ALREADY AVAILABLE IN THE NEXT SCREEN ,BUT WHILE AM ENTERING PARTICULAR MVEMNT TYPE ,PLANT,STORAGE LOCTN IT WILL APPEAR IN INITIAL SCREEN AND IT WONT ALLOW TO GO NEXT SCREEN WITHOUT GIVING THE REASON
Message was edited by:
 neela renganathan
Message was edited by:
 neela renganathan

Can't find user exit or enhancement at RGJVBR15

Hi everyone,
I need your help guys. Right now,i'm developed sapscript for billing statement (cash call and expenditure). I have finished the form but i have problem at print program RGJVBR15. This print program is called by RGJVBR10 (Tcode : GJ14 --> Hard Copy Billing).GJ 12 and GJ 13 is used to extract data that will be used by forms.
There is statement like this in RGJVBR15 at subroutine CREATE_EXPENDITURE (Line 1421 in include file RGJBF_I1) :
AT NEW C5_CURR. --> Group by funding currency
   PERFORM POPULATE_SPOOL_ID
ENDAT.
PERFORM F6100_PROC_... -> This will be used to open form,write form (sapscript)
AT END OF C5_CURR.
ENDAT.
The problem is that i want to change this logic. I want to change the standard logic (display report group by funding currency), i want to ignore this and instead using group currency. So there only one report produced with one currency only (if using standard logic there is more than 1 report based on funding currency). But i can't find user exit or enhancement in this SAP Standard Program. Is anyone know if there is user exit or enhancement in this program? I don't want to use implicit enhancement because it's will produce problem when client want to upgrade their system. Thank you.
Best Regards,
Satria

hi,
for tcode GJ14 user exits avaliables are
Exit Name           Description
JVA-IM-1             Joint Venture: Integration Manager Set Intercompany Lines
JVA_IM_2            User Exit Splitting
JVA_IM_3            User Exit Check Document
regards,
paras

Find User Exit or BADI

Hi all,
When I worked in the version 4.6 I used to use the object v_ext_act, v_ext_imp and the transaction St05 to find a user exit or a badi when I need it. But since I started to work in the version 6.0 it seems that with these objects I can't find anything.
Any of you know if SAP has changed the name of these objects?
Thanks

Hi Raul,
Another approach that you can use in order to find out user-exit or badi in a program or transaction is to start execution of it in debug mode and then put a break-point in following statements:
CALL CUSTOMER-FUNCTION --> to find user-exits.
CALL BADI --> to find BADI's
Then just press F8 and SAP will stop whenever a user-exit or badi is invoked.
Hope this helps.
Cheers.

Help with BDC, user exits and BAPI

Hello all:
1) I posted a question before about BDC documentation and people sent me lot of helpful material. Thanks to all of them. I am very new to ABAP coming from VB background and wondering if someone can tell me how to practice one simple BDC program starting from scratch. What do I first need to do to get started? I have Mini WAS 6.20 test version and like to practice BDC programming.
2) What are user exits and BADI and can anyone provide some documentation and sample code if possible.
Thanks everyone in advance.
--Mithun.

Hai Mithun Dha
Go through the following Documentation & Example Code
Just check these links.
Diff. between LSMW & BDC?
BDC SESSION
CALL TRANSACTION
CALL DIALOG
What is BDC or batch input
The Batch Input is a SAP technic that allows automating the input in transactions. It lies on a BDC (Batch Data Commands) scenario.
BDC functions:
E BDC_OPEN_GROUP : Opens a session group
E BDC_CLOSE_GROUP : Closes a session
E BDC_INSERT : Insert a BDC scenario in the session
E The ABAP statement "CALL TRANSACTION" is also called to run directly a transaction from its BDC table.
It runs the program RSBDCSUB in order to launch automatically the session. The session management is done through the transaction code SM35.
The object itself is maintanable through the transaction SE24.
BDC methods:
Method
Description
Parameters
OPEN_SESSION
Opens a session
SUBRC (Return Code ? 0 OK)
SESSIONNAME (Session to be created)
CLOSE_SESSION
Closes a session
None
RESET_BDCDATA
Resets the BDC Internal Table...
None. Normally, for internal purposec
BDC_DYNPRO
Handles a new screen
PROGNAME (Name of the program)
DYNPRONR (Screen Number)
BDC_FIELD
Puts a value on the screen
FIELDNAME (Name of the field)
FIELDVALUE (Value to be passed)
CONSTRUCTOR
Constructor - Initializes NO_DATA
NODATA (No data character). The constructor is called automatically when the object is created.
RUN_SESSION
Launches a session with RSBDCBTC
None
CALL_TRANSACTION
Calls a transaction with the current BDC Data
MODE (Display Mode)
UPDATE (Update Mode)
TCODE (Transaction to be called)
BDC_INSERT
Inserts the BDC scenario in the session
TCODE (Transaction to be called)
BDC techniques used in programs:
1) Building a BDC table and calling a transaction,
2) Building a session and a set of BDC scenarios and keeping the session available in SM35,
3) Building a session and lauching the transaction right after closing the session.
BDC using Call Transaction
BDC using Call transaction involves calling an SAP transaction in back ground from within the ABAP
program. The process involves building an Internal BDC table containing the screen information needed to
execute the required transaction and then passing this to the Call transaction command (See code example).
The full procedure for creating a BDC program is as follows:
What is the difference between batch input and call transaction in BDC?
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
BATINPUT/DIRECT INPUT
A: Batch-inputs can not be used to fill the "delivery due list" screen because it is not a dynpro. This is a standard SAP report. A SAP report (check with "System -> Status") may be called using SUBMIT sentence with the appropriate options . It is preferred to call a report than create a Batch-input program.
GO THROUGH THIS LINK
http://www.guidancetech.com/people/holland/sap/abap/zzsni001.htm
check with this code
include bdcrecx1.
tables : mara.
data : begin of it_mara occurs 0,
matnr like mara-matnr,
mbrsh like mara-mbrsh,
mtart like mara-mtart,
maktx like makt-maktx,
meins like mara-meins,
end of it_mara.
start-of-selection.
perform upload_data.
perform open_group.
loop at it_mara.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
it_mara-matnr.
perform bdc_field using 'RMMG1-MBRSH'
it_mara-mbrsh.
perform bdc_field using 'RMMG1-MTART'
it_mara-mtart.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_field using 'MSICHTAUSW-KZSEL(02)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'MAKT-MAKTX'
it_mara-maktx.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
it_mara-meins.
perform bdc_field using 'MARA-MTPOS_MARA'
'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
perform close_group.
*& Form upload_data
text
--> p1 text
<-- p2 text
FORM upload_data .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'c:\mat_bdc.txt'
FILETYPE = 'ASC'
TABLES
DATA_TAB = it_mara.
IF SY-SUBRC = 0.
SORT IT_MARA BY MATNR.
ENDIF.
ENDFORM. " upload_data
flat file structure is
PRANIT_011 CCOUP This is Testing material kg
PRANIT_012 CCOUP This is Testing material kg
PRANIT_013 CCOUP This is Testing material kg
PRANIT_014 CCOUP This is Testing material kg
PRANIT_015 CCOUP This is Testing material kg
when your selecting views
this particular material will belongs to Po/Sales or some other areas .
when you select basic 1 --it gives description
select basic 2 -- it gives tax ,amount, base unit of measurement
BDC TO BAPI
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
[for VA01 use BAPI_SALESORDER_CREATEFROMDAT2]
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.
For User Exits
User Exits
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project,
and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules.
These function modules belongs to the same function group as the subscreen Subscreens are edited with transaction CMOD.
When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next
time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu
entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule.
The code for the function module is writeen by the developer. You are not writing the code directly in the function module,
but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements.
Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only
be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Have look at this links
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf
http://www.sapgenie.com/abap/ole.htm
http://help.sap.com/saphelp_46c/helpdata/en/59/ae3f2e488f11d189490000e829fbbd/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf
Creation of Field Exits
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
Step 1: Determine Data Element
Step 2: Go To Field Exit Transaction
Step 3: Create Field Exit
Step 4: Create Function Module
Step 5: Code Function Module
Step 6: Activate Function Module
Step 7: Assign Program/Screen
Step 8: Activate Field Exit
Step 1: Determine Data Element
- Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
- An easy way to determine the data element associated to a particular screen field is to:
Go the appropriate screen.
Position the cursor in the appropriate field.
Press eF1f for field-level help.
Click on the eTechnical infof pushbutton (or press eF9f) on the help dialog box.
On this Technical Information dialog box, the data element will be specified if the field is 'painted' from the ABAP/4 Dictionary.
Step 2: Go To Field Exit Transaction
- The transaction to create field exits is CMOD.
- You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
- From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
- After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
- From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
- After choosing this menu path, a dialog box will prompt you for the appropriate data element .
- Enter the data element name and click the eContinuef pushbutton.
- Now, you will be able to create the function module associated to the data elementfs field exit.
Step 4: Create Function Module
- You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the eContinuef pushbutton.
- In the eFunction modulef field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
- You can add an identifier (an underscore followed by a single character ).
- The first function module for a data elementfs field exit must be created without an identifier.
- To create the function module, click on the eCreatef pushbutton, choose menu path Function module -> Create, or press eF5f.
- After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing eEnterf, you will be able to go ahead and create the function module.
- Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
- From the function modulefs attributes screen, click on the eSource codef pushbutton or choose the Goto -> Function module menu path to the code of the function module.
- Here you will add your desired functionality for the field exit.
- Remember that field exitfs function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
- You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
- After coding the function module, you must remember to activate it.
- Use the Function module -> Activate menu path to activate the function module.
- At this point, you can return to the field exit transaction.
- You should be able to 'green arrow' back to this transaction.
- When you return to the field exit transaction, you will see an entry for the newly created field exit.
- At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
- Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
- This step is only needed if you want to make a field exit local.
- To make a field exit local, select the field exit and click on the eAssign prog./screenf pushbutton.
- In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
- In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the eFld. Exitf field.
- If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
- If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
- The field exit must be active for it to be triggered by the system.
- Activate the field exit by choosing the Field exit -> Activate menu path.
- After assigning the field exit to a change request, its status will change to eActivef and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Thanks & regards
Sreenivasulu P

How to find User Exits/ Enhancments/ BADI's for T-code CJ20N

Hi All,
In T-code CJ20N, assume there are two fields A & B. User will input value in A, based on A value I need to fill B field. So I need to find first suitable User Exit/ Enhancment/ BADI.
Kindly help me in this regard. Pls tell me how to find User Exit/ Enhancment/ BADI for a given t-code.
Regards
Jaker.

Hi,
Check the following , this might help,
1. CNEX0037
2.CNEX0038
3.CNEX0039
Regards
Kiran Sure

Need help to find photo's on my backup drive,since installing Mountain Lion cannot find where they are stored.The backups after ML install are greyed out except in Applications, MyFiles and Devices really welcome a hand with this please.

I need help to find my photo's please (2500) on my backup drive.Lost them after doing a clean install of Mountan Lion I have tried to find them but had no luck. I use Time Machine with a 1TB Western Digital usb drive. Thanking anyone in anticipation of a solution.

-Reece,
We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this?

Find User Exit in MIR7 to validate Vendor info

When incoming invoice is being parked in transaction MIR7, I need to find user exit to add validation/warning if vendor has multiple PI partners in the vendor master. It has to happen when user types in PO number and hits enter key this is when vendor info is retrieved in top right corner of the screen.
Any suggestions/recommendations would be greatly appreciated.
G.B.

It looks like function module MRM_HEADER_CHECK is called from fm MRM_INVOICE_CREATE during invoice creation. I tried to set break points there, but it does not seem to be executed when I need it.
I already know how to check for multiple PI partners ( table WYT3 ). What I need is to find a user exit in MIR7 with PO # available when user types in PO number and hits enter key and vendor info is retrieved in top right corner of the screen. I need something similar to routine USEREXIT_XKOMV_BEWERTEN_INIT in include RV61AFZB, but PO # is not available there. Any ideas?
Thanks in advance,
G.B.

Help reqd on USER EXIT

Hi all....
I got a new object in USER EXIT for my current impl project...
1st,i know that how to creat it in cmod but i desnt know how to do enhancement assignment and writing a code for the below requirement
my SD consultant req is......
IN VA01, the end user will able to enter(create std order) only 4 items(POSNR)
at a time as maximum....(should restrict it) and if while entering the 5th item,it throws an error msg and revert back it.....
the std program is "MV45AFZZ" ,here the enhancement assignment should be added in,inside the below sub-routine......as include program
"Form USEREXIT_SAVE_DOCUMENT_PREPARE"...
Endform..
Do u people know how to do it.....if anyone have done already...pls help on this by replying with sample codes and ur helps...
waiting for ur replies
thanks & regards
sankar

Hi,
These are standard enhancements available for VA01.
SDAPO001 Activating Sourcing Subitem Quantity Propagation
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
this can be checkit out in 'SMOD' and find out the user exits like screen, filed, funtionction exits etc under each enhancement which mentioned above.
Once if you find the user exit under one enhancement let suppose 'V60F0001' go to 'CMOD' and crete one project and click on create button.
then give the enhance ment name V60F0001 under the 'enhancement assign' componet
Then bydefault u will get all userexits available under this enhancement select one them a/c to your require ment press on one userexit and it enter the funtion exit and double click on 'INCLUDE' it ask to create press yes then write ur won code 'ACTIVATE' and come back and 'ACTIVATE' and come backe 'ACTIVATE' and come to initial screen ie 'CMOD' and press 'ACTIVATE' button.
this is the way how to create user exit.
There are some exit for checking order
User exits in the program MV45AFZZ :
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User-Exits in program MV45AFZB :
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
etc.
Look at User Exits in Sales Docuemnet Processing
<a href="http://">User Exits in Sales Docuemnet Processing</a>
some of tips to find user exits :
User Exits & Customer Exits :
 User Exits: Executed with the help of user exits (these are subroutines reserved for customers that have been inserted in objects in the SAP namespace) 'hard-coded' at various points within SAP Repository objects.
 Customer Exits :
 1. Menu Exits: Menu exits add items to the pull down menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications. These special entries have function codes that begin with "+" (a plus sign).
 2. Screen Exits: Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special sub screen areas on a standard R/3 screen and calling a customer sub screen from the standard screens flow logic.
 it is called by call customer- sub screen
 3.Function Module Exits :Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits. When you add a new menu item to a standard pulldown menu, you use a function module exit to define the actions that should take place once your menu is activated. Function module exits also control the data flow between standard programs and screen exit fields.
 it is called by Call Customer- function
 Go to SMOD and press F4 where you will get the options of screen, menu, function exits.
 Go to SE81 select the module which you want to check and find the enhancement.
 In IMG (SPRO), search for enhancements in interested area.
 Go to the program or transaction and search for CALL CUSTOMER-FUCTION or EXIT_<Progname>_nnn
 For screen exits go to screen in SE51/SE80 search for- CALL CUSTOMER-SUBSCREEN..
Reward with points if helpful.
Regards,
Vijay

Urgent. Need to know about user exits.

Hello Everyone,
I am new to this forum. I need to know about user exits.
My next project requires me to implement user exits, screen exits, etc.
I am a rookie to this topic.
Can anyone help me as to how to start with his topic.
Any sort of help is appreciated.
Cheers,
Neelam.

Hi Neelam,
Welcome to sdn.
This is a very frequently asked topic.
Please use teh search forum option for this type of queries.
http://help.sap.com/saphelp_47x200/helpdata/en/c8/19763443b111d1896f0000e8322d00/frameset.htm
Regards,
Ravi

Need help to find user exit

Similar Messages

Maybe you are looking for