Need help to fix Signature: RtlEnterCriticalSection
I have the signature above on my Firefox crashes. I'm only able to open in Safe Mode. When not in safe mode, when I try to open Firefox I get an alert box with the message below before Firefox shuts down and takes me to the submit a crash report screen. Alert message:
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
Hello manojyd,
The problem is it could be a huge list of things that is causing the issue.
Let's start by stress testing the system and seeing if it gets too hot.
How to Stress Test your Hardware for Stability and Heat Problems with Prime95
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.
Similar Messages
-
Hi
I'v tried many times to update my applications however, my account can't do it because security code for my card is incorrect note that I'm sure my card details are correct completely so i need help to fix it as much as you can plz. ThnksLook, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful. -
when ever i try to download my iPod recovery software, it keeps saying connection timed out. really annoyed and need help to fix it
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
If the iPod was Disabled, place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
I need help in Fixing my Hp Split x2
I need help in fixing my hp split x2. I got it with windows 8 but i upgraded to Windows 8.1. sine then I stop accessing my D:/ drive ( 500gb HDD)on which I stored data. Besides, I get DCP watchdog violation Error each time I disconnect the tablet and reconnet it. I also get another error message: DCP_DRIVER_POWER_STATE_FAILURE. Can somebody help me out?
Hi Alsaab73,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your and getting an error message. The HDD that are you using, I would need the model number. Have you looked in the device manager to see if there is a conflict with the driver installed? It might be listed under the USB devices? Have you tried a different port on the Notebook? Right clicking an updating the driver might be all that is needed.
As per the description of the issue you get error DPC_WATCHDOG_VIOLATION.
Is the issue confined to any particular game or a certain function you are choosing on the Notebook?
The First thing you need to try is disable any firewalls or virus protection and restart the Notebook.
If that does not helps try these steps from Microsoft.
Boot the computer using the Windows 8 bootable DVD.
On the Install Now screen click on Repair your computer.
You will then see a blue screen and an option to choose.
Click on Advanced Options and then click on Troubleshoot.
Click on Automatic Repair and follow the prompted instructions.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Need help to fix my computer, dude: crashes
I am Manoj. I am from India. There is a problem with my desktop computer. Now days, it gets hanged on regular basis due to which I am unable to work with it. Sometimes it hangs 10-12 times a day. I need help to fix my computer, dude. One more thing sometimes when it hangs, there are many horizontal lines on the monitor and I hear a sound of beep from the CPU.Please help me.
Thanks.Hello manojyd,
The problem is it could be a huge list of things that is causing the issue.
Let's start by stress testing the system and seeing if it gets too hot.
How to Stress Test your Hardware for Stability and Heat Problems with Prime95
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical. -
I can't log into the Itunes store. I type in my Apple ID and my password and the message "This Apple ID cannot be used for the iTunes Store." "Enter another Apple ID." I need help on fixing this.
Yeah I'm starting to see a ton of forums posts right now about the same thing :/ I wonder what's going on
-
iMac froze after accidentally dropping hundreds of jpegs in desktop.......need help to fix.....desktop filled now..thanks
Important: mende's suggestion will remove everything from your Desktop, not just the jpegs. Not good. Do the following instead. Open Terminal in Utilities and copy/paste, then hit return after each. The second will create a folder on the Desktop called "photos." The third command will move all of them into that new folder, "photos" This will save them. These commands assume you are logged into the account with the troubled Desktop.
cd ~/Desktop
mkdir photos
mv *.jpg photos/
If you don't care about saving them then the following will delete them. (It is critical that you only use copy/paste.)
cd ~/Desktop
rm *.jpg
Message was edited by: WZZZ -
Need Help W/ Different Signatures & Accounts Using Mail Program
Hi all!
I have 2 questions:
1) Say I send an email from [email protected], but I also have an account with [email protected] in this mail program with a separate mailbox. When I compose my new email address from the mailbox for [email protected] address, the account selected is [email protected], instead. I know there is a way to fix this, but I can't figure out how to do it.
2) I have different signatures for each of my multiple email addresses in my Mail program. Is there a way to make each one the automatic signature for the account it is being sent from?
I am using the 1.3.11 (v622/624) version of mail on my G4 Mac Mini.
Thanks for any help anyone can give me!Hi,
I'm back trying to get some much needed help. Now I'm getting this message when trying to open Premire Elements 3.0 from my C drive. I get the message "Sorry a serious error has occurred that requires Premier Elements to shut down. We will attempt to save your current project." When clicking on OK or the closing X it shuts down. I tried the advice that I received in this forum. I tried deleting "workingset.prsl" . Instead of deleting it I dragged it out of the "Styles folder and onto my desktop. I didn't delete it for fear that I would cause myself more problems. This way if it didn't work I could put it back into the "Styles folder which I did because it didn't work. I'm desperate now. I'm making a video of our 50th wedding anniversary that I have been working on for over a year and now I can't get it opened.
Larry -
Hi I hope some one can tell me step by step how to fix windows 8.1, I can't update any of my Apps and can't install any new apps now and I get error code 0x80073cf9? But my problem is different than most of the other FIXES I read about, because nothing
fixes my problem to be able to install new Apps and get app updates and stop getting that error code?
I keep getting same error code 0x80073cf9 after I try any of the FIXES I have read about and tried all the fixes on my Lenovo Z580 laptop, that came with windows 8 and updated to 8.1. And ever since I bought this laptop I could
always install and update all my apps for the last year when I had Win 8 and Win 8.1 now. This has been going on since April and May and its driving me crazy! And from the May updates I did get all the updates and
I also installed the KB update that said I need this KB to get all updates in the future.
But all the other people when they get this error code they could not even open and use any of their Apps already installed. And they also get the error code when they try to update or get a new apps.
But I can click on any APP installed already and use all my Apps with no problems. I have read so many how to fix this error code but nothing works! :-( I have tried a lot of
the fixes on Microsoft forums that says do this and the fix will get rid of the error code but I keep getting the same error code after I try that fixes. And I have read a lot of other windows 8 an windows 8.1 web sites when
I search for how to fix this error code? And tried all of the fixes that were different from the Microsoft forum fixes. But after I try those fixes I still can't install any apps or can't get my app updates?
Please to any person's who can help me by giving me more that 1 fix, because I have tried so many fixes, If you know more that 1 fix tell me how to do your fix step by step so I can understand what you say to do to fix my windows store?
Thanks for any and all help? And if I don't get any help in this section of the forum I will try to put this in a different area, if I don't get any help at this section of the forum I will try to ask this in another part of he forum ok?
I really need HELP with this so I can get my laptop working again to install new apps and get the updates to my apps?Fixed the problem by going to settings/store and logging out with apple ID. Then logged back in with password and updates, apps, and iTunes store seem to work ok now.
-
Hello!
I have my cod which needs some bug fixing. This is a drag and drop application where the user will drap the correct answer on corresponding targets. My problem here is, when one target is already occupied by an object i can still drop another object there, which shouldn't. can you please help me fix this?
thanks in advance!
Sincerely.
Milo
Here's my code:
var startX: Number;
var startY: Number;
var correct: Number = 0;
var attempt: Number = 0;
var currentlyDragged:MovieClip;
// collection of objects stored in array
// so that you can reference them programmatically
var objects:Array = [at1, in1, in2, in3, in4, in5, in6, in7, in8, on1, on2];
activateObjects();
// assigns listeners and other functionality to the objects in objects array
function activateObjects():void {
for each(var mc:MovieClip in objects) {
mc.addEventListener(MouseEvent.MOUSE_DOWN, pickObject);
mc.buttonMode = true;
// assign drop targets based on names
switch(String(mc.name).substring(0, 2)) {
case "at":
mc.dropTargets = [targetAT1];
break;
case "in":
mc.dropTargets = [targetIN1, targetIN2, targetIN3, targetIN4, targetIN5, targetIN6, targetIN7, targetIN8];
break;
case "on":
mc.dropTargets = [targetON1, targetON2];
break;
function pickObject(e:MouseEvent):void {
currentlyDragged = MovieClip(e.currentTarget);
currentlyDragged.startDrag();
startX = currentlyDragged.x;
startY = currentlyDragged.y;
stage.addEventListener(MouseEvent.MOUSE_UP, dropObject);
function dropObject(e:MouseEvent):void {
stage.removeEventListener(MouseEvent.MOUSE_UP, dropObject);
stopDrag();
var droppedOn:MovieClip;
if (currentlyDragged.dropTarget) {
// loop through targets belonging to the currently dragged clip
for each(var mc:MovieClip in currentlyDragged.dropTargets) {
if (currentlyDragged.hitTestObject(mc)) {
// get the target
droppedOn = mc;
currentlyDragged.removeEventListener(MouseEvent.MOUSE_DOWN, pickObject);
currentlyDragged.buttonMode = false;
currentlyDragged.x = droppedOn.x;
currentlyDragged.y = droppedOn.y;
correct++;
correctCounter.text = String(correct);
// stop loop - it is not necessary to continue
break;
attempt++;
attemptCounter.text = String(attempt);
// return to the initial position if there is no hit
if (!droppedOn) {
currentlyDragged.x = startX;
currentlyDragged.y = startY;
if (correct == objects.length) {
var congrats:CongratsMC = new CongratsMC();
// place i in the middle of the screen
congrats.x = (stage.stageWidth - congrats.width) * .5;
congrats.y = (stage.stageHeight - congrats.height) * .5;
addChild(congrats);Try the code below.
Also, use int instead of Number whenever possible - it is smaller and faster.
import flash.display.MovieClip;
import flash.display.Sprite;
var startX:Number;
var startY:Number;
var correct:int = 0;
var attempt:int = 0;
var currentlyDragged:MovieClip;
// collection of objects stored in array
// so that you can reference them programmatically
var objects:Array = [at1, in1, in2, in3, in4, in5, in6, in7, in8, on1, on2];
var congrats = new CongratsMC();
congrats.addEventListener("close", closeCongrats);
activateObjects();
// assigns listeners and other functionality to the objects in objects array
function activateObjects():void {
for each(var mc:MovieClip in objects) {
mc.addEventListener(MouseEvent.MOUSE_DOWN, pickObject);
mc.buttonMode = true;
// assign drop targets based on names
switch(String(mc.name).substring(0, 2)) {
case "at":
mc.dropTargets = [targetAT1];
break;
case "in":
mc.dropTargets = [targetIN1, targetIN2, targetIN3, targetIN4, targetIN5, targetIN6, targetIN7, targetIN8];
break;
case "on":
mc.dropTargets = [targetON1, targetON2];
break;
function pickObject(e:MouseEvent):void {
currentlyDragged = MovieClip(e.currentTarget);
currentlyDragged.startDrag();
startX = currentlyDragged.x;
startY = currentlyDragged.y;
stage.addEventListener(MouseEvent.MOUSE_UP, dropObject);
function dropObject(e:MouseEvent):void {
stage.removeEventListener(MouseEvent.MOUSE_UP, dropObject);
stopDrag();
var droppedOn:MovieClip;
correctCounter.text = String(correct);
if (currentlyDragged.dropTarget) {
// loop through targets belonging to the currently dragged clip
for each(var mc:MovieClip in currentlyDragged.dropTargets) {
if (currentlyDragged.hitTestObject(mc)&& mc.notUsed) {
// get the target
droppedOn = mc;
mc.notUsed = false;
currentlyDragged.removeEventListener(MouseEvent.MOUSE_DOWN, pickObject);
currentlyDragged.buttonMode = false;
currentlyDragged.x = droppedOn.x;
currentlyDragged.y = droppedOn.y;
correct++;
correctCounter.text = String(correct);
removeTarget(droppedOn);
// stop loop - it is not necessary to continue
break;
attempt++;
attemptCounter.text = String(attempt);
// return to the initial position if there is no hit
if (!droppedOn) {
currentlyDragged.x = startX;
currentlyDragged.y = startY;
if (correct == objects.length) {
// place i in the middle of the screen
congrats.x = (stage.stageWidth - congrats.width) * .5;
congrats.y = (stage.stageHeight - congrats.height) * .5;
addChild(congrats);
function removeTarget(target:Sprite):void {
var i:int = 0;
for each(var mc:MovieClip in objects) {
for (i = 0; i < mc.dropTargets.length; i++) {
if (mc.dropTargets[i] == target) {
mc.dropTargets.splice(i, 1);
function closeCongrats(e:Event):void {
removeChild(congrats); -
I need help with validating signatures.
I have Adobe Acrobat X and Reader 9 and need help with how to validate signatures.
I have a document that I am emailing to all employees that require the signature; but, when the form is emailed back, it states that the signatures requires validating.Or, is the validation something I do once the form is emailed back to me?
I guess a subquestion would be, how to establish/manage trusted certificates with reader or acrobat 8. -
my computer is completely turned to window,
all the apple system is deleted,while i download
window xp now the computer is working as a window xp not as an apple.
i try to download re-installation cd but i can;t.i need help if somebody
guide me i will welcome. thanks.Your question is not completely clear, but I'm going to guess that while installing Windows on your Mac, you formatted the entire hard drive as NTFS. If this is what happened, there are 2 things you can try. If you have any information you do not want deleted from Windows, such as documents you created, back them up ASAP before you do any of these steps, as it's going to erase your hard drive (that is the only way to fix it), and you will have to reinstall Mac OS and Windows, and then restore your data, hopefully you had a back up.
Option 1 is follow the steps in this article: http://support.apple.com/kb/TS2176.
Option 2 may or may not work, but you can try booting from the windows install disk, run the windows installer and reformat the entire hard drive as FAT instead of NTFS. -
Hi All,
could anybody help in fixing the following error.
C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_SAISTARS_SAISTARS\jsp_servlet\__listproject.java:1071: cannot resolve symbol
probably occurred due to an error in /listProject.jsp line 221:
<pg:pager maxIndexPages="<%=10%>" maxPageItems="<%=10%>">
Thanks and Regards,
shaikHi abinash,
Not enough information!
Check the logs for errors and post the here.
regards
Juan -
TS3694 I need help to fix error message -69
I am having problem with syncing my ipod classic (160gb). I have this error message -69, that I need help with. I have already restored my ipod, but cannot add my anything (audiobooks-my music) to my ipod.
see if you have any friend have a Mac computer, do a restore there before syncing with your PC
-
Just installed security update 2014-002, now Itunes will not open, I have rebooted twice with no effect, I don't know what else to do to get my itunes back. Need help please
Believe I've firxed my problem, at least, ITunes is now working again. I followed the information provided from a couple of posts on this thread, (1) re restarting with command-s held down; did it twice, made no differerence; (2) manually re-installed the Security update; no difference; each time restarting, no effect; (3) shutdown the computer; I did for 35 minutes, upon restart, ITunes is back to normal, seems to be working fine. Turning the computer off must clear the cache?
Maybe you are looking for
-
Firefox - Gif animations too fast
I've noticed that gifs "play" faster on Linux than on Windows, is there any reason for this and is there any way to change it back to normal speed? I've googled it, but maybe I'm just not using the right search terms. Arch64, Firefox 3.6 (newest) etc
-
Same Purchasing group assigment to multiple Purchasing Org
Dear all, I am facing an issue in SRM 5.0 in Classic Scenario. In R/3 the freedom exist to assign independently the Purchasing Organization and the Purchasing Group to a PREQ or PO. Then the following lists have been created: <u>PurchORG</u>: - PORG1
-
How many bits does my macbook pro retina have
I am trying to download anti-virus program but it requires me to know if my Mac is 32 bit or 64 bit and I honestly have no idea. Can someone please help?
-
I am getting an error message unable to cummunicate with network device. It was working
I have a desktop and laptop on a netgear wireless router. I just got my new Office jet Pro 8500 A910. it all worked when I got my new printer
-
Stickies used to move to any desktop with mission control. Now it only stays on 1 screen. Floating is enabled. Any solutions?