Need help to recovery a voice recorde on my blackberry curve 8350i

This morning in an important meeting with my doctor I used my BB to record it, but when I went to play it back it is not in the list of recordings just he one I made prior to it. I know when I pulled the BB out of my pocket after the meeting it said it was still recording. I stopped it, but do not remember getting the save, discard, cancel message I usually get.
Is there any way to recover this file, it's more than a little important I get the recording?
you can send any information to my email <removed>, this is very importante to me, please
Eduardo
EDIT: Personal Information such as e-mail is prohibited for your security. Please review User Guidelines under section "Be careful."

Two or three thoughts.
My BlackBerry handset has become my exclusive email tool. I think if you get used to the idea of accessing email from different machines, with the BlackBerry being one of them, it will begin to make sense.
If you haven't enabled a junk email filter at the server level on your email service, do it. Filtered email will not be sync'd with the BlackBerry email client.
Set up your email as IMAP. If you are using Outlook.com, setup as EAS. Create folders for email you don't want sync'd to the inbox on the BlackBerry. Setup rules to move that email to the appropriate folder as it arrives. You will be able to view those folders and their contents on the BlackBerry when you want, but they will not be sync'd automatically unless you turn that on.
As far as your last question, what is the context? Generally speaking, the email can be automatically synchronized. If IMAP or EAS, the folders on the device and other devices and the servers are synchronized. Read an email one place and it is marked read everywhere. Ditto deletes and moves.
- Ira

Similar Messages

Blackberry Curve 8350i or Blackberry Curve 8330 *PLEASE HELP*

I just got a Blackberry Curve 8350i and I'm trying to figure out how to stop sending the text message I'm replying to with my reply. If anyone could tell me how to fix this I'd greatly appreciate it.

You aren't, actually.
The initial messsage is ONLY there for your reference, it is not sending.
If you don't want to see it at all, on your BB, go to Options > SMS and Number of previous Items = 0.
Message Edited by JSanders on 03-06-2009 03:11 PM
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Need Help in Inserting first ever record

I need help in inserting my first ever record from an OAF page.
I've created an AM 'MasterAM', added 'MasterVO' to it. Created a Page CreatePG which has a submit button, id = Apply
Below is processRequest of CreateCo
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (!pageContext.isFormSubmission()) {
am.invokeMethod("createRecord", null);
and below is processFormRequest
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("Apply") != null)
OAViewObject vo = (OAViewObject)am.findViewObject("MasterVO1");
am.invokeMethod("apply");
pageContext.forwardImmediately("OA.jsp?page=/abcd/oracle/apps/per/selfservice/xxdemo/webui/CreatePG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true,
OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
Below are 'createRecord' and 'apply' in MasterAMImpl
public void createRecord(){
OAViewObject vo = (OAViewObject)getMasterVO1();
if (!vo.isPreparedForExecution()) {
vo.executeQuery();
Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
public void apply() {
getTransaction().commit();
When I run the page, it opens and I try to enter some data and press Apply. it does not insert into the table.
Could anyone help me out.
My jdeveloper version is 10.1.3.3.0.3

I am facing the same issue.
rows get inserted into the tbale, but only whol columns have the data.
all the attributes are correctly mapped to view instance and view attribute.
My VO has 1 EO and , i have joined another table to get desctriptions of the field.
could that be the problem ?
ex :
select item , desc
from t , master
where t.cola=master.colb
table t is the custom table I want the data to go in. but only who columns appear after commiting.
any clues ?

Need help on filtering out one record from a report and open in new page

Hi I am new and embarrassed to write in the forum asking silly questions. Thing is I am learning all from scratch without help from anyone. I have created a database (have previous knowledge only from Access) and have managed to create a beautiful report from a search filter. This report lines up several records matching what I needed. Now, I want to make the whole report with hyperlinks to a detailed page on each of the records in the report. I have tried using the feature where one can make one column hyperlinked and redirect to a new page, where I am getting all the records again - instead of only getting the record I am clicking on. I have looked and looked in the forums without finding solution and I have tested and tried various methods without luck. I am suspecting that I need some sort of knowledge on how to write a select query with where conditions that can apply to filtering out a record from one report to get another detailed on only one object (i.e. record). :/ Stupid or what?

Hrefna.
What you need to look into is two things:
1) The link you defined, needs to set additional attributes for the target page. In the "Column Link" box, you have set the link to "Page in this Application" and followed by the page number (let's say, Page 10). Below that, you should set an Item to an item on you target page (let's call that P10_PRODUCT_ID). This item should be the primary key of your detail table (on the targe page). You can select this item from the popup list. The Value of the item should be picked from a popup list as well, being the value from the record you clicked on. This should then transfer your selected item to your page. The URL will then have something like P10_PRODUCT_ID:5 at the end.
2) On the target page, 10, you must change the query slightly, so that it adds a WHERE clause:
WHERE PRODUCT_ID = :P10_PRODUCT_ID
Now, you should be set.
Hope this helps.
Borkur

Need help on recovery discs

I have a Pavilion dv6-1360us and recently had to install a new hdd due to the old one failing. i ordered the recovery disc from hp and went to install it. when it asked for the second disc it wouldnt load. this is for windows 7 64bit. Now all it does when i turn it on is show the windpows is loading files screen. then the starting windows screen. from there it shows a grey screen and u can hear the cdrom drive reading the disc but it just goes back to the begin with the windows loading files screen. Any information would be awesome. thanks!

Can you read the 25 character Microsoft Windows 7 license key attached to bottom of laptop? If so you can download Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and listed on the Microsoft COA sticker.
You can use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB (requires a blank DVD or USB flash
Use the 25 character product key on the PC to activate the installation.
Then go to your support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Need help getting second mic to record

I am recording using Apogee Duet with two inputs, and have created two tracks in Logic Express, but I seem to only get one input / track to record. I have checked the I/O, and track1 is setup with XLR1 and track2 is setup with XLR2. There is only one strip on the verticle side of the window displayed at a time, but both show up at the bottom (in the editing section?) of the display window. Both tracks has the R button highlighted red for record. Not sure what else I should do. Your help is very appreciated.

Make both tracks Mono. It seems to me that Apogee Duet inputs are a stereo-pair. But when recording Mic signals, you don't need a track to be stereo (cause a signal from microphone is mono anyway). Once you made tracks mono, you'll be able to engage both for recording simultaneously (provided you selected different inputs for each track).

Need help with recovery/reinstall of OS

Hi,
I need some assistance repairing my niece's laptop. She has a Toshiba Satellite A305 S6872. She is not tech savvy and has been using it since christmas without any antivirus/spyware protection. It was a huge mess. I was able to remove all the virus & spyware from the computer but it was so bad that the OS was affected and will not function correctly. I have backed up all her data and now it needs to be recovered to factory settings. She never created the recovery disks and now the recovery disk creater won't work... it gets an error about the optical drive in use or not installed and the application won't open. I also tried to boot into the recovery console by pressing 0 at boot but was unsuccessful, it seems like the option is not there or it won't work. I could really use some help here. She is in town for the summer so I only have about 2 weeks to fix it. I know it won't take that long to fix but I don't think ordering a recovery disk is an option unless they can be downloaded. Please help me restore this computer.

I also tried to boot into the recovery console by pressing 0 at boot but was unsuccessful
Since that option is not available, I would bite the bullet and order the discs.
If you like, you can try running sfc /scannow. For some reason, Microsoft has withdrawn the article for Vista. It's virtually the same as for Windows XP.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
But it's my experience that once a hard drive is really infested with bad guys, it cannot be repaired.
-Jerry

Need help to insert and update records in MDM

Hi ,
I am trying to develop an webdynpro application which can create and update records in tables of a repository of MDM . For example .. I want to insert values and later update values in Vendor table.
I am new to webdynpro and MDM. If any one can help step by step or can send a sample code which I can be ready to use that would be great help.
If anyone can have a sample code .. kindly mail to "[email protected]"
It is urgent. Please help.
Regards,
Niraj
Edited by: Niraj Kumar on May 23, 2008 6:50 AM

Hi Niraj,
Are u going to work with webdynpro Java/ABAP?
some materials which are found useful are sent.
Cheers,
Mary

Need help to create a new record in mdm using java webdynpro

hi all,
I have to develop an application to create a new record in mdm by using java WebDynpro . Please help me what is the process that i have to follow to do this and provide me if you have any step by step guidance for this.
thanks & regards,
Mahi.

Hi,
The below link will help u to make the application in JAVA webdynpro
The article has code to for creating records.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/803e9e80-21f4-2a10-8cbf-bcf6a8060be3
Hope this may help u .
Rgds
Ankit

Need help with recovery!

Hello, I have a problem, my model is HP Pavilion dv7 6051er.
After reinstalling the OS team got off F11-recovery.
I can not find a solution to your problem, see "Support & Drivers" can not find any software patches that could, would solve my problem. A hard drive intact.
Please help with the decision of the key problems.
thanks in advance

Can't understand this. Try again with a little more explanation of the problem.

Need help in archiveing and deleting records

Hi frnds
I wrote a procedure to archive the records and delete the archived one but after inserting and deleting the tot counter is not working and its showing 1 record inserted and i didnt tried the deletion part,pls find my code and how to get the correct no of records inserted as out put and same for deletion.One more thing,before deletion i want to confirm all the records which i going to delete is already inserted eg,if i could'nt able to do insert the specific no of rows the program shud exit without doing the deletion,How to accomplish that
Declare
cnt NUMBER := 0;
tot number :=0;
CURSOR ins IS
select count(*) from Cal_log
where trunc(c_date) ='11-Aug-2008';
BEGIN
FOR rec IN ins LOOP
insert into Calls_arc
select * from Cal_log
where trunc(c_date) ='11-Aug-2008';
tot :=tot + 1
cnt := cnt + 1;
IF (cnt >= 100) THEN
COMMIT;
cnt := 0;
END IF;
END LOOP;
DBMS_OUTPUT.PUT_LINE('inserted ' || tot|| ' records in call_arch.');
FOR rec IN ins LOOP
delete from Cal_log
where trunc(c_date) ='11-Aug-2008';
tot := tot + 1;
cnt := cnt + 1;
IF (cnt >= 100) THEN
COMMIT;
cnt := 0;
END IF;
COMMIT;
DBMS_OUTPUT.PUT_LINE('Deleted ' || tot || ' records from Cal_log');
END;

Since
CURSOR ins IS
select count(*) from Cal_log
where trunc(c_date) ='11-Aug-2008';always returns one row, your loop
FOR rec IN ins LOOPdoes not make much sense. But it does not hurt. The real issue with your code is you increment tot by one while insert processes more than one row (all rows for Aug 11). You should use %ROWCOUNT. And one more thing, never rely on implicit date conversions since default date format is client session sependent. Anyway, all you need is:
BEGIN
    insert
      into Calls_arc
      select count(*)
        from Cal_log
        where c_date >= to_date('11-Aug-2008','dd-mon-yyyy')
          and c_date < to_date('12-Aug-2008','dd-mon-yyyy');
    DBMS_OUTPUT.PUT_LINE('inserted ' || SQL%ROWCOUNT || ' records in call_arch.');
    delete
      from Cal_log
      where c_date >= to_date('11-Aug-2008','dd-mon-yyyy')
        and c_date < to_date('12-Aug-2008','dd-mon-yyyy');
    COMMIT;
    DBMS_OUTPUT.PUT_LINE('Deleted ' || SQL%ROWCOUNT || ' records from Cal_log');
END;
/SY.

Need help about recovery m

hi i have a zen microphoto and i am having problems. it started when my mp3 player froze when i pressed pause and so i removed the battery from the back to restart it. when i turned it back on it went to recovery mode now am having trouble what to do in recovery mode i dont want to touch anything incase i really stuff it up. PLEASE ANY SUGGESSTIONS

tambuda22 wrote:
i got my creative zen for xmas and it was working fine until i went to turn it off today and it wouldnt turn off and i have no idea how to reset it and i dont have the charger so how do i get it to work again?
Which Zen? If it's a Zen Micro you need to gently remove the battery for a moment and then replace it and the restart your Zen Micro <i> while holding the switch to ON</i>.
It will go into Recovery Mode.
Select Disk Cleanup, let it finish [might take a minute or 2] and then select Reboot.
Please do not select <i>Replace Firmware</i> unless told to by Creative Support!
It's better to keep the Zen Micro's charge 'topped up' after your initial charging. Running it flat isn't good for the battery and it can sometimes lead to the Zen freezing.Message Edited by skb on 0-02-2006 09:33 PM

Need help with multi track/simultaneous recording

Please forgive me if the answer to my question has already been covered; I have searched the other posts but haven't been able to find the answer.
I am recording a podcast with a Behringer Xenyx X1832 mixer. In GB I know how to select "multi track recording" and set my two mics that are conneced to the first two channels of the mixer to "mono 1" and "mono 2" on the input source.
My question is how do I record audio from my Macbook on a seperate track?
I have a Focusrite 2i2 connected via USB to the Macbook acting as an output, then TRS cables from the outputs going to channel 7/8 on the mixer. When I play audio I can hear it perfect and adjust EQ and volume, but I am unable to record it on a seperate track on GB.
When I click on the track on GB, the input source says "stereo 1/2" and when I try to click the red buttons to arm the other two mono tracks where my mics are connected it says "The input channel of this track is already in use. To record on this track, choose another input channel."
What am I doing wrong? How do I send audio from the Macbook to the mixer and then record it on a seperate track, along with seperate tracks for each of the mics?

You need to create an aggregate device:
http://support.apple.com/kb/HT1215

Need help with no camera sounds & recording in Captivate 5

I am an experienced user of Captivate 3 & 4, but I'm having lots of problems with Captivate 5. I am working on a Windows 7 OS and have just installed Captivate 5. When I try to record I can't get any camera sounds, even though I have changed my preferences to show them. Also, Captivate seems to be recording erratically, and sometimes it is catching actions, other times it isnt' I am running the program as Administrator and I am very puzzled by this. Normally Captivate has worked like a charm out of the box. Now it seems to be fighting my every step of the way. Am I missing something?
Audio recording seems spotty too. Sometimes it works just fine, other times Captivate just hangs and doesn't really record any sound.
Any help would be appreciated/

Hello and welcome to the forum,
First to be sure: did you install the patch released in December (Help, Updates...)? If not try that first of all. You can find details about the issues solved by this patch in this blog post:
Patch for Captivate 5
If this doesn't help, try to clear the cache (Preferences, Global).
Perhaps (not sure) your Preferences folder has become corrupt. It so, try to find it. In Win7 normally it is a folder (Captivate 5) in this path:
\users\<username>\appdata\local\adob
Maybe you will have to change the settings to make this folder visible in Explorer, by default it is in a system folder and invisible. You can delete this folder (while CP is closed) and when you restart CP a brandnew one will be created.
Lilybiri

Need help solving a problem with recording

hello im using a korg k49 midi controller with garagband. whenever i record the instrument becomes "poppy" and the sound cuts in and out, almost like little click noises. does anyone know a solution to this problem? help would be appreciated

I have the same problem, except I'm trying to record guitar through a TASCAM US-122.
My theories:
1. Bad TASCAM drivers.
2. Leopard bug.
3. Garageband bug.
Some people suggest that things are better if you turn off your airport.
Rebooting and restarting Garageband can help.
So far, nothing is working for me.

Need help to recovery a voice recorde on my blackberry curve 8350i

Similar Messages

Maybe you are looking for