Need help to restore router settings

3 days ago I was using the internet freely when all of a sudden the Internet stopped working. I went to go check the modem and router and I unplugged and replugged the wires of both to try to restore the Internet connection but instead all I could do is connect to the router but no internet connection. When all else failed I pushed the reset button on the Cisco router and now the Internet connection is working but when I trouble shoot the problem it says "Your computer appears to be correctly configured but the device resource is not responding." please I need help asap.

Ian V. wrote:
Model Linksys E1000
Thanks! What I can suggest is to reset the router, update the firmware if needed (download it here http://homesupport.cisco.com/en-us/support/routers/E1000) and reconfigure.
* Setting up a Linksys router with Cable Internet service
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...

Similar Messages

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

HT3024 i need help on the network settings on the imacd g4

I need help with my Internet settings on the inaction G4

Hello,
What Interface are you using? Built-in Modem for Dialup, Ethernet or Airport to a Router or Modem?

HT1212 I forgot my passcode and i have no backup of my Ipad, it is locked and disabled, can anyone help to restore factory settings atleast as a new ipad

I forgot my passcode and i have no backup of my Ipad, it is locked and disabled, can anyone help to restore factory settings atleast as a new ipad

Hey salosawaya,
If you have never synced your device with iTunes and you forgot your passcode, you'll follow these directions:
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
via: iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Welcome to Apple Support Communities!
Regards,
Delgadoh

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

Need help to restore my caller ID on new replaced sim card... iphone network won't switch feature on

Need help to restore my caller ID on new replaced sim card... iphone network won't switch feature on

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

Need help in restoring back to default Wallpaper

Hi,
My friend did change the IPad Wallpaper and when i try to restore it back to the original wall paper. I don't find it at all. Now how do i restore back to the
default wallpaper.
I did try the below options to restore
1. Reset Home Screen Layout
2. Reset all Settinggs
3. Default by pressing Home Key + Sleep/Wake Button for 10 secs until Apple Logo appears
But none helped to restore it. Need help in restoring back to old wallpaper.
Thanks,
ramanan

James, in case you are having a problem, these are the steps:
1. Restart the computer holding the Command and R keys
2. In the OS X Utilities window, select Disk Utility and click continue
3. From the sidebar, select your internal disk drive
4. Click the Erase tab near the top of the Disk Utility window
5. Choose Mac OS Extended (Journales) from the pop-up menu
6. Change the name of the disk drive if you want to
7. Click the Erase button near the bottom right of the Disk Utility window
8. In the confirmation dialog that appears, click Erase
9. From the menu bar, choose Disk Utility > Quit Disk Utility
10. In the OS X Utilities winddow, select Reinstall OS X and click Continue
11. In the Install OS X window, click Continue
12. Read and licenss agreement and click Agree
13. In the confirmation dialog that appears, click Agree
14. Select your computer's disk drive form the list of available volumes, click Install
The installer will recreate an OS X Recovery HD, and then restart to the newly created OS X Recovery HD, and then continue with the remainder of the isntall process. This second part may take a while so be patient. When it completes, the iMac will restart again into the installed copy of Mac OS X as a new machine. You will be greeted by the full Setup Assistant.

Need help to restore PeopleSoft Cofig Manager settings.

Hello all,
My Peoplesoft system:
HCM v9.0 (demoversion)
Tools v8.49
RDBMS: Oracle 10g
OS:Win XP pro
I have installed Peoplesoft recently.Everything was good.While working with Process Scheduler i have choosen wrong option,resulted deleted to Process Scheduler domain.At that time Process Scheduler was up.Immediately i lost Config Manager settings.
Unable login to Ptools like:Datamover,App designer and PeopleSoft login..
How can i restore those settings?
Please help....!!!
Edited by: user8970203 on Jan 19, 2010 4:07 PM

Can anybody helpme...Please!!!
Thanks
Edited by: user8970203 on Jan 20, 2010 5:42 AM

Hiya there I need help I restored my iPhone 3G and now won't unlock anymore it's at factory settings

Need help big time please

Sounds like you screwed something up when you replaced the back. As the iPhone is NOT user serviceable, there's not much here we users can offer you.
Bring your phone to a 3rd party repair shop and see what they say.

Need help on which router to buy for my BB 8320

Now i know 8320 is dated but at this point i am not planning to change anytime soon .
So I have a router which is kinda old, it didnt really occur to me since it worked. When i got my bb 8320 i was in a hotel and i could connect through their wireless without any hassle. I could surf, use youtube, name it.
When i got home i couldnt do anything, i spent countless nights trying to figure out waht was wrong then i realized its my router. If only BB said somethign it wont support old routers then i wouldve saved myself hours of self-loathing.
Anyways I also have gone to my friends house, and i could connect to her linksys router without any hassle. i was the one who set her router up and we bought it this year. i didnt do anything special, configuration-wise or w/e.
So NOW i am just going to buy a new router. I really need help!!!!
I was wondering if this one is good:
W311R Wireless-N Broadband Router
W311R integrates the wireless AP, router, four-port switch and firewall in one, and increases over 4 times transmission range of ordinary 802.11g products. Compatible with IEEE802.11n (Draft 2.0) and IEEE802.11g/b standards, it can provide up to 150Mbps stable transmission rate. It is dedicated to SOHOs and students’ dormitory. In addition, URL and MAC address filtering can take it easy for parents and network administrator to manage network life, and QoS bandwidth control over specific computer’s downloading speed is supported as well. Moreover, UPnP and WMM support can smooth your MSN voice better, and the included Setup Wizard on CD-ROM will be easy and fast for non-savvy users to install the device and access to the Internet.
Overview:
* Includes router, wireless access point, four-port switch and firewall in one
* Provides up to 150Mbps uploading and downloading speed
* Supports two WPS (Wi-Fi Protected Setup) encryption methods: PBC and PIN
* Compliant to IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3 and IEEE802.3u standards
* Supports far-distance transmission, 100 meters indoor, 400 meters outdoor (depends on the environments around)
* Supports 64/128-bit WEP encryption, WPA and the latest WPA2 encryption security authentication
* Supports RTS/CTS protocol and data partitioning function
* Provides one 10/100Mbps Auto-Negotiation Ethernet WAN ports for WAN connection
* Provides four 10/100Mbps Auto-Negotiation Ethernet LAN ports for LAN connections
* Supports xDSL/Cable MODEM, static and dynamic IP in community networking
* Supports remote/local Web management
* Supports WMM to better smooth your voice and video
* Supports SSID stealth mode and access control based over MAC address (up to 30 entries)
* Supports Auto MDI/MDIX
* Supports wireless Roaming technology and ensures high-efficient wireless connections
* Supports auto negotiation/manual mode for 802.11b/802.11g/802.11n
* Supports UPnP and DDNS
* Supports Firefox 1.0, IE5.5 or above
* Supports SNTP
* Supports virtual server, DMZ host
* Built-in firewall for hacker’s attack prevention
* Supports DHCP server/client
* Supports auto wireless channel selection
* Supports the control over LAN access to Internet
* Provides syslog to record the status of the router
* Supports WDS wireless network extension
* Supports QoS function
Input Voltage Range
AC 110~240V
Output Voltage Range
9V~1000mA
Consumption
20dbm
Operating Temperature
0? ~ 40?
Storage Temperature
-40? ~ 70?
Operating Humidity
10% ~ 90% RH non-condensing
Storage Humidity
5% ~ 90% RH non-condensing
Antenna
One Non-detachable external antenna (5dBi)
Frequency Range
2.4GHz-2.5GHz
EVM
-30dB
Sensitivity
54M:-74dBm@10% PER; 11M:-85dBm@8% PER; 6M:-88dBm@10% PER; 1M:-90dBm@8% PER
Outdoor
400m
Indoor
100m
WLAN?LAN
93Mbps
WLAN?WLAN
93Mbps
Frequency Range
2.4GHz
Gain
5dBi
Nominal Impedance
50
Polarization
Linear; Vertical
Maximum Power
1W
* Vertical Beamwidth 360º

Flip UltraHD.
Shoots mp4 H264 format files. Fits in a shirt pocket and records 2 hrs worth of material to an internal card. Charges from your USB port as you download. If you are just trimming clips, you can use QT Pro without conversion. If you need to edit, convert to ProRes 720p30. Works like a dream.
Just make sure you have it solidly placed when you pull the trigger as there is no image stabilization.
Oh, and it is only $199 US.
x

How do I restore my contacts. I hit reset my mistake and unfortunately when I connected my phone to my PC, it backed up Automatically and over wrote the old back up with my contacts. I last backed up on icloud 5 months ago. I need help to restore .

I need help restoring my contacts

Given the lack of reply I'd say my data is gone, which was my own surmise but I would like confirmation if that is possible?
Is it true that on my 500+ GB HDD that iTunes only keeps the most recent backup of the OS? I'm not sure if I had older backup that I could use that as it would cause other data (ie new messages etc) to be lost but I am genuinely curious. Also, I'm not aware if there is a selective restore - as in can I restore contacts from a backup without restoring the entire OS + state info?
I can't find the public apology from apple for inconveniencing so many of it's users with an update that was almost entirely political (bye bye Google), partially cosmetic (woot new title bar colour) and serious issues that caused data loss for thousands/millions - if someone could direct me to that it would be appreciated as I would love to provide some feedback to that post.
I wrote a more controvesially titled version of this same enquiry called "If Apple were worth $548 billion instead of $547 bn could they afford a software tester" and that thread actually had some useful replies before the thread was deleted by an over zealous forum admin. If the people that love the product so much that they can't bear negative feedback hadn't jumped my thread to troll with their foolish views it might even have gotten somewhere. So here I'm left with a bland post with no replies and still my data is gone. Would love a solution but fear none exists, thus the negativity.

HT1766 I need help with restore from bachup

I NEED HELP WITH MY IPAD RESTORE FROM BACKUP

This is the iPod touch forum and you are not providing any information to help you.

I need help with Restoring my iPod. =/

Okay, so I put music on my iPod using WinAmp, right? Well, the music was unorganized and the quality was terrible, so I downloaded iTunes and transferred the music to iTunes from WinAmp. I also wanted to restore my iPod so I could re-add the music files to it.
NOW, iTunes tells me that my iPod is in recovery mode and needs to be restored. So I restore it, and it STILL tells me it needs to be restored. I swear, I've "restored" this thing like eleven times.
Oh, and to add to the problem, it's suddenly telling me that my iPod has encountered a problem while restoring itself by an "unknown error"
*PLEAE HELP!* I would give you everything I own if I knew you personally, I just want my music. lol

Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

Need Help With Restoring My Ipod, Problem seems Unique, please help.

Hi, I have a mini as most of you others do as well. I will outline all the problems and the solutions I have taken to solve these problems, yet they have all failed.
1) When trying to turn my IPOD on I run across the Folder with the Exclamation Point
SOLUTIONS: I have tried to reset, and change the format of the drive, both have failed to solve the problem. When I try to connect the ipod to the computer (in disk mode and out of disk mode) it says The Ipod is corrupt it may need to be restored. So I restore the IPOD and it says Disconnect it and replug it into a power source (which I interpret as the wall charger). After I disconnect it (I have tried just disconnecting it when the menu restarts to the APPLE and disconnecting it by manually selecting the IPOD from the source list to disconnect after waiting) and plugging it into the wall charger I get the folder with the exclamation point again. It seems to be a cycle, and I don't know how to break it. If it is a faulty harddrive I guess I will try to replace it using the method outlined in other posts, but if I'm missing anything please let me know. Thank you.

That's the faulty drive/OS indicator.
If restoring the iPod from iTunes doesn't work, it's likely that the drive has died and needs to be replaced.
It's a fairly easy task with the proper tools.

I just bought my MacBook Pro 13" and I tried to install an anti virus but then it went into a grey folder with a question mark I need help with restoring the iOS please

I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please

What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide.

Need help to restore router settings

Similar Messages

Maybe you are looking for